RF - Intensa

2-1/4”
CONNECTORS & TOOL
NF50V214
716MV214
Reference
716MV214
716FV214
NM50V214
NF50V214
SG 214
SIL-744 90ml
SIL-744 310 ml
Rem.:
Description
7-16 DIN male, O-Ring
7-16 DIN female, O-Ring
N male, O-Ring
N female, O-Ring
Saw guide
Sealant for connectors using sealant injection
Sealant for connectors using sealant injection
• Sealant for connectors using the sealant injection method
must be purchased separately.
Specification of N-connectors 7-16 connectors
Electrical
• Nominal impedance (Ω) 50 50
• Return loss at 2.3 GHz (dB) ≥32 ≥32
• Insulation resistance (GΩ) ≥5 ≥10
• Test voltage (at sea level) 2.5 4
(kV rms, 50 Hz)
• Working voltage (at sea level) 1 2.7
(kV rms, 50 Hz)
• Screening effectiveness >128 >128
up to 1 GHz (dB)
• Outer contact resistance (mΩ) ≤0.5 ≤0.5
• Inner contact resistance (mΩ) ≤1 ≤1
• PIM ratio (2 x 20 W carrier) (dBc) ≤ -155
(Typical -163)
Mechanical
• Torque on coupling nut (Nm) 8 30
• Cable retention (N) >400 >1000
Environmental
• Temperature range (°C) -40 to +85
• Degree of protection (humidity) IP67/IP68 (mated connectors)
SG214
Materials
• External parts
• Outer contact
• Inner contact
• Dielectric
• Gaskets
Passivated silver plated or
electroless nickel plated brass
Passivated silver plated brass
Passivated silver plated
high-strength copper alloy and brass
TPX/PTFE
High quality silicone
ACCESSORIES
Type Reference Description
• Grounding clamp with parallel outlet
GCS214PAR
• Fixing clamps see page 35
• Additional Weatherproofing see page 41
GCS214PAR
Kabelwerk Eupen AG 29