Advanced RIP Lab - Router Alley

Advanced RIP Lab v1.10 – Aaron Balchunas
4
Advanced RIP – Lab
Router 2
Router 10
Fa0/0
E0
S0
Router 4
Router 9
S0
E1
Fa0/1
Router 1
Router 12
Fa0/1
E0
S1
E0
Router 6
E0
E1
Fa0/1
Fa0/0
Router 3
S0
S1
Router 11
Router 5
S1
S0
Router 8
RIP Objectives:
Router 7
8. Configure md5 authentication between all neighbors. Use a key of “cisco”.
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
9. Use the rip debugging commands to ensure updates are authenticated and
sent as unicasts.
_________________________________________________________________
_________________________________________________________________
10. Each router should now have a route to Router 1’s and Router 12’s second
loopback networks. Alter the RIP metric in such a way that RIP will prefer
the longer route to those loopback networks.
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
* * *
All original material copyright © 2006 by Aaron Balchunas (aaron@routeralley.com),
unless otherwise noted. All other material copyright © of their respective owners.
This material may be copied and used freely, but may not be altered or sold without the expressed written consent
of the owner of the above copyright. Updated material may be found at http://www.routeralley.com.