iPrism Administration Guide - EdgeWave

Overview of iPrism Software
• HotFix Manager: Starts your Internet browser and points it to the webbased
HotFix Manager. Note: This tool should only be used under the
direction of Technical Support.
Managing the List of Applications
When first started, the Appliance Manager will scan the local subnet for
iPrisms and automatically display these systems in the main window.
Sometimes it is necessary to manage appliances which are on a different
subnet. In this case, the Appliance Manager must be configured to access
these systems. From the main window, select an appliance and click
Manage Selected Appliance.
FIGURE 8. Manage Appliance List
Clicking Add creates a new blank entry. You can then enter the IP address
and HTTP port number of a remote appliance. The default port number for
28
iPrism Administration Guide