zehnder radiavector
zehnder radiavector
zehnder radiavector
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Product description<br />
<strong>zehnder</strong> <strong>radiavector</strong> completto<br />
Description<br />
Zehnder Radiavector Completto is a fully welded convection radiator<br />
containing from 2 to 5 of 70 x11 x1.5 mm oval-shaped water-conducting<br />
tubes placed next to each other and from 1 to 4 of the same, placed<br />
above each other.<br />
The radiator is primed, coated with powder enamel, and improved in<br />
accordance with DIN 55900.<br />
The heat capacity is tested in accordance with DIN EN 442 standard;<br />
radiant losses are decreased with the use of a reflective cover plate<br />
behind the radiator. The radiator complies with the requirements of<br />
the GUV (German Accident Insurance).<br />
The radiator is equipped with a built-in AV 6 (Oventrop) thermal valve<br />
and thermostat; connection size is M 30 x 1.5 mm.<br />
The picture shows model RV 323 - Completto<br />
Additional advantages<br />
• radiator with thermal valve ready for installation<br />
• can use any suitable thermostat M 30 x 1.5 mm<br />
• pre-installed valve<br />
• connection spacing 50 mm<br />
• design may include a reflective cover plate<br />
Shipping limitations for deliveries from the factory<br />
Installation height,<br />
mm<br />
70 – 280<br />
Installation length,<br />
mm<br />
500 – 2000<br />
2000 – 6000<br />
Maximum recommended water flow rate 250 kg/hr<br />
Incremental changes in<br />
length, mm<br />
100<br />
200<br />
Connections: 2 x 1 /2“ (female thread size) in the lower part of the radiator<br />
with an connection spacing of 50 mm. The radiator is supplied in<br />
an installation-ready package;<br />
by request:<br />
• a desired mounting set<br />
• other colour choice from 700-colour palette of RAL and NCS S<br />
• design including a reflective cover plate<br />
• special shapes<br />
• without the Zehnder thermostat<br />
• valve with clamp seal<br />
• with decorative grille<br />
• high-pressure design<br />
Model<br />
Radiavector completto<br />
Technical parameters<br />
Installation length<br />
from 500 to 6000 mm<br />
Installation height<br />
from 70 to 280 mm<br />
Installation depth<br />
from 73 to 257 mm<br />
Operating pressure<br />
5 bar (6.5 bar test)<br />
Operating temperature max. 120°<br />
Standard equipment<br />
• radiator, primed and finished with powder enamel of RAL 9016 co-<br />
• lour<br />
• built-in temperature control in the top section of the radiator<br />
• Zehnder thermostat<br />
• connections: 2 x 1 /2“ (female thread size),<br />
• connection spacing 50 mm<br />
• air-vent connection 1 x 1 /2“<br />
4
Change language