Automotive Product Offering - Saflex.com

More documents

Recommendations

Info

Automotive Product Offering Rev: 04/15/09 Effective date April 2009 - Valid until June 2009 World Area Sales Region Asia China Product Offering The listed products and dimensions are available with the lead times and minimum order quantities stated. * Product listed as ‘available MTO’ will be offered on a Make-to-Order basis. Product will be produced upon receipt of a firm order. * Lead time will be estimated in function of the possible option: substitution, re-slit or production in next available campaign. * Please contact your customer service representative. * Special quality instructions (SQI) or Special packaging instructions (SPI) may require longer lead time Packaging Rolls smaller than 153 cm will be supplied in vertical packaging. Rolls of 153 cm or larger will be supplied in horizontal packaging. Surcharges A price surcharge will be applied for non-standard products offered. Amount/sqm Surcharge for (1) $ 0.20 Interleaving © 2008 Solutia Inc. SAFLEX® and SOLUTIA AND INFINITY LOGO® are trademarks of Solutia Inc., registered in the U.S. and other countries. www.saflex.com
Automotive Product Offering Rev: 04/15/09 Effective date April 2009 - Valid until June 2009 World Area Sales Region Asia China Custom Colour Offering Our service provides expert consultation and matching of your distinct colour requirements in glazing applications through the use of proprietary PVB interlayer technology. Phase 1 Phase 2 Phase 3 Phase 4 New Colours - Process (for adding a new colour) Lab Scale New Colour Match Customer provides: Colour specifications and/or colour chip, and glass materials to be used in the final glazing design. Salfex provides: 10cm x 10cm laminated samples using PVB colour strips shipped to customer for review and approval. Pilot Plant Colour Match Customer provides: Feedback and approval on Lab Scale Colour Match, and € 5000/new colour(apportioned equally among requesting laminators) for non-returnable Lab Service Fee. Saflex provides: Custom Formulation of colorants to produce custom colour PVB interlayer sample (approximately 10sm, < 90cm wide) to be shipped to customer for review and approval. Saflex also provides technical lab measurement of colours, and solar property measurements. New Colour Pilot Plant PPAP Production Customer provides: Feedback and approval on Pilot Plant Colour Match Saflex provides: Approximately 250sqm of custom colour PVB to be provided to customer for PPAP trials ( at commercial price) New Colour Commercial Line Production** Customer provides: Feedback and approval on PPAP materials. Saflex provides: Production quantities per designated min order quantity. ** The transition plan from PPAP Production to Commercial Line Production will need to be communicated to the customer during Phase 1. Internally this will be managed via the S number(as a formal Sourcing Change Process). Once the S number is complete the customer will need to make its own internal assessment regarding need for any further PPAP requirements/documentation. Lead Time 2 weeks 8 weeks < 8 weeks < 3 months Minimum quantities Custom Colour products will be as 0.38mm or 0.76mm thickness. Minimum yearly production quantity - 20 ksqm except RB47 NEW: 5 ksqm and RB17 NEW: 10 ksqm. Ordering Information Orders for all products should be placed with our Customer Service Center in Singapore: Tel: 1-800-122-271 www.saflex.com Notice: Although the information and recommendations set forth herein (hereafter “Information”) are presented in good faith and believed to be correct as of the date hereof, Solutia Inc. makes no representations or warranties as to the completeness or accuracy thereof. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will Solutia Inc. be responsible for damages of any nature whatsoever resulting from the use of or reliance upon Information or the product to which Information refers. Nothing contained herein is to be construed as a recommendation to use any product, process, equipment or formulation in conflict with any patent, and Solutia Inc. makes no representation or warranty, express or implied, that the use thereof will not infringe any patent. NO REPRESENTATIONS OR WARRAN- TIES, EITHER EXPRESS OR IMPLIED, OR MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMA- TION OR THE PRODUCT TO WHICH INFORMATION REFERS. This product availability guide is subject to change without prior notice from Solutia. © 2008 Solutia Inc. SAFLEX® and SOLUTIA AND INFINITY LOGO® are trademarks of Solutia Inc., registered in the U.S. and other countries. www.saflex.com
Page 1 and 2: Automotive Product Offering Rev: 04
Page 7: Automotive Product Offering Rev: 04

Automotive Product Offering - Saflex.com

Create successful ePaper yourself

Delete template?

Save as template?