Cincinnati Final Program - Sampe

SAMPE ’07 Exhibitors Products and Services
Delsen Testing Laboratories
T10
1024 Grand Central Avenue, Glendale, CA 91201
www.delsen.com
An independent testing laboratory with services including mechanical,
electrical, and flammability properties testing, polymer analyses, metallography,
and environmental exposures. Specialties include testing
advanced composites, fatigue, fracture toughness, impact, OSU heat
release rate, smoke density and toxicity testing and evaluation of printed
wiring products.
Dexmet
T28
7 Great Hill Road, Naugatuck, CT 06770
www.dexmet.com
DEXMET provides expanded material for Lightning Strike, and RFI,
EMI protection as well as other aircraft, and composite applications.
Our experienced engineering team, and our ISO certified facilities design
and manufacture material to meet your specification, and deliver
it rapidly, on time. Using both in house as well as partnership resources,
DEXMET has developed, and continues to develop new coatings
to meet the industry's requirements. We are your engineering resource
for Lightning Strike and RFI, EMI materials, from our thin, flattened
mesh to materials in widths up to 60" wide.
DIAB 139
315 Seahawk Drive, DeSoto, TX 75115
www.diabgroup.com
DIAB is the world leader in structural core materials and sandwich
composite technology; DIAB supplies materials and solutions that make
products light, strong, and competitive. DIAB's advanced polymer foam
Divinycell, end-grain ProBalsa, core bedding adhesive, and panels
are designed for demanding applications and provide design freedom,
optimized weight, superior strength, excellent fatigue life, stiffness,
and toughness. DIAB also provides advanced testing, design,
and engineering services.
EDO Corp. 132
New York, NY
www.edocorp.com
EDO provides a full design, analysis, prototyping, and production
fabrication of advanced composite structural
systems. EDO products include primary
aerospace structures, missile fuselages,
holding tanks, pressure vessels,
and launch tubes. Composite capabilities
include braiding, filament winding, hand layup pre-preg, resin
transfer molding (RTM), vacuum assisted RTM (VaRTM).
Euro-Composites Corp.
T17
13213 Airpark Drive, Elkwood, VA 22718
www.euro-composites.com
Euro-Composites Corporation is a leading global manufacturer of lightweight
products for aerospace, transportation, marine and industrial
applications. Products utilize the extraordinary strength to weight ratio
of Nomex, Kevlar and aluminum honeycomb core. Capabilities include
core manufacture, sandwich panel production, thermal forming,
splicing, bonding and 5 axis CNC machining.
Fabric Development
T19
1217 Mill Street, Quakertown, PA 18951
www.fabricdevelopment.com
Fabric Development, Inc. offers the unique combination of design and
development combined with production capabilities. We can supply
all forms of textile structures including woven, knitted and braided
fabrics. Reinforcements can be produced from all fiber types including
—22
carbons: standard and ultrahigh modulus, Kevlar, Fiberglass, Spectra,
Nicalon, Tyranno, Quartz, and Ceramics. In addition, textile preforms
are also produced to near net shapes for RTM and VARTM applications.
Fabric Development's Quality System is registered to AS9100B
and ISO9001:2000.
Flow International Corporation 133
23500 64th Avenue South, Kent, WA 98032
www.flowcorp.com
Combining Flow's invention and world leading ultra-high pressure
abrasive waterjet (AWJ) technology with high-speed routing and drilling
capabilities, Flow is the only company in the world offering a total
composite machining center solution from a single source. And now,
with the industry's only 87,000psi pumps, Flow Waterjets operate even
faster and less expensively than other systems. Realize the many cost
and quality benefits of AWJ: No mechanical stresses, delaminations,
heat, fiber pull-out, airborne dust, secondary finishing, etc.
General Plastics Mfg. Co. 143
9910 Burlington Way, Tacoma, WA 98409
www.generalplastics.com
AS9100/ISO9000 certified manufacturer and molder of LAST-A-FOAM®
rigid and flexible high-density polyurethane foams and tooling materials.
We serve applications in composite core, nuclear transportation,
composite tooling, thermoforming, marine applications, and models
and prototype industries. We are specialists in fulfilling high-performance
requirements. We have broad manufacturing capability, and
have products qualified to most major airframe and defense requirements.
Put us to work for you--we thrive on challenges.
GrafTech International Ltd.
T8
12900 Snow Road, Parma, OH 44130
www.graftech.com
GrafTech International Ltd. is one of the world's largest manufacturers
of high quality graphite and carbon based products. GrafTech manufactures
graphite electrodes, carbon refractory systems, thermal management
products, fuel cell and other specialty graphite and carbon
products for the steel, electronics, power generation, semiconductor,
transportation, petrochemical, and other metals markets.
Greater Wichita Economic Development Coalition 115
350 W. Douglas, Wichita, KS 67202
www.gwedc.org
The GWEDC is the lead economic development organization for
Wichita and South Central Kansas. The Wichita area is home to Airbus,
Boeing, Bombardier Learjet, Cessna, Raytheon and Spirit
Aerosystems. With 250 suppliers in the area, Wichita is the premier
aviation manufacturing cluster in the world. It is also home to the
National Institute for Aviation Research, one of the country's leading
institutions for composite and advanced material research.
GSG, Inc.
T33
8443 Strato Drive, Sandy, UT 84093
www.theGREENsalesguy.com
GSG is a manufacturer's representative company with over 20 years
selling experience in composites, specializing in sales and support of
filament winding machines and other composite process equipment.
GSG represents the following companies: Bolenz & Schaefer (BSD),
Brenner International, Eastman Machine Company, Lynco Grinding,
Material S.A, and MJC Engineering & Technology.