Cincinnati Final Program - Sampe
Cincinnati Final Program - Sampe
Cincinnati Final Program - Sampe
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
From Art to Science: Advancing Materials<br />
& Process Engineering<br />
SAMPE Fall Technical Conference and Exhibition<br />
October 29-November 1, 2007<br />
<strong>Cincinnati</strong> Hilton Netherland Plaza, <strong>Cincinnati</strong>, Ohio<br />
<strong>Final</strong> <strong>Program</strong> and Exhibitors Guide<br />
Sponsored by SAMPE’s Midwest Chapter<br />
Society for the Advancement of Material and Process Engineering<br />
1—
—2
Welcome to <strong>Cincinnati</strong> and the 2007 SAMPE Fall<br />
Technical Conference and Exhibition!<br />
SAMPE Thanks Our<br />
Conference Sponsors<br />
The Midwest Chapter of SAMPE is delighted that you are with us in <strong>Cincinnati</strong> to<br />
gain new perspectives on the many faces of advanced materials technology!<br />
Our theme is “From Art to Science: Advancing Materials & Process Engineering.”<br />
It is a theme that reminds us of the incredible journey that our community has<br />
taken — from creating materials by trial and error to creation through modeling,<br />
simulation and scientific principles. The early foundations of our technology often<br />
rest on the “art” that people practiced, and the many artistic facets of <strong>Cincinnati</strong><br />
and the Hilton Netherland Plaza Hotel serve as constant reminders of the<br />
importance of the “art” and the part it has played in our growth.<br />
Our conference bursts into action on Monday with 11 tutorials, including several<br />
first-time offerings that represent exciting and emerging trends facing the materials<br />
and process community. Tuesday kicks off with Barbara Sanders, Director of<br />
Core Product Engineering and Engineering Operations at Delphi Thermal Systems<br />
and a great innovator in composites technology, as our Keynote Speaker. From<br />
there we begin exciting and informative technical sessions in several relevant<br />
areas of M&P. The sessions also include four Key Technology Tracks focus areas<br />
- Nanotechnology, Propulsion, Computational Materials, and Morphing Materials;<br />
these Technology Tracks combine several forums for educating and informing<br />
that include tutorials, panels, and technical papers.<br />
The Exhibit Halls will be open for two full days, and are overflowing with impressive<br />
technologies from local and non-local exhibitors.<br />
Social and networking opportunities will also be abundant with a Tuesday evening<br />
Welcome Reception, our Wednesday evening Riverboat Cruise & Dinner, and the<br />
Thursday Luncheon talk on “The Science of Art Conservation” by Stephen D.<br />
Bonadies.<br />
In addition, full package conference attendees will receive a SAMPE calendar<br />
that incorporates science-based art to highlight each month of the year. In keeping<br />
with our theme, a science-based art contest was held over the summer and the<br />
top images selected for inclusion in this SAMPE calendar. The winner of that<br />
contest has won a free trip to New York! Their entry as well as many others will<br />
not only be included in the calendar, but also displayed at the conference.<br />
We hope you enjoy your time in <strong>Cincinnati</strong> and leave with new knowledge, new<br />
friends and renewed energy for our industry!<br />
Tia Benson Tolle and Mickey McCabe<br />
General Co-Chairs<br />
2007 SAMPE Fall Technical Conference (39 th ISTC)<br />
SAMPE welcomes ASTM D-30 to <strong>Cincinnati</strong>!<br />
(See page 12)<br />
Table of Contents<br />
Conference At-a-Glance . . . . . . . . . . . . . . .4<br />
Conference Tracks. . . . . . . . . . . . . . . .6 & 7<br />
Exhibitor Listings. . . . . . . . . . . . . . . . . . .20<br />
General Information . . . . . . . . . . . . . . . . . .8<br />
Hotel Layout. . . . . . . . . . . . . . . . . . . . . . .5<br />
ITAR Restrictions. . . . . . . . . . . . . . . . . . . . .9<br />
Keynote Address . . . . . . . . . . . . . . . . . . . .10<br />
Luncheon . . . . . . . . . . . . . . . . . . . . . . . . .17<br />
Memphis ’08 Call for Papers. . . . . . . . . . . .19<br />
Outstanding Paper Award Winners. . . . . . .17<br />
Riverboat Cruise . . . . . . . . . . . . . . . . . . . .15<br />
Sponsors . . . . . . . . . . . . . . . . . . . . . . . . .3<br />
Technical <strong>Program</strong> . . . . . . . . . . . . . . . . . . .10<br />
Tutorials. . . . . . . . . . . . . . . . . . . . . . . . . .9<br />
Upcoming SAMPE Conferences . . . . . .6 & 26<br />
Virtual Career Fair . . . . . . . . . . . . . . . . . . .14<br />
3—
SAMPE’s enhanced this conference with four new special tracks:<br />
•Nano Track<br />
•Propulsion Track<br />
•Computational Material Science Track<br />
•Morphing Track<br />
Conference At-a-Glance<br />
Monday, October 29<br />
Registration 7:30 AM – 5:00 PM<br />
Tuesday, October 30<br />
Registration 7:30 AM – 5:00 PM<br />
Wednesday, October 31<br />
Registration 7:30 AM – 5:00 PM<br />
Thursday, November 1<br />
Registration 7:30 AM – 1:30 PM<br />
Tutorials**<br />
9:00 AM – Noon<br />
•Carbon Nanotube Enabled<br />
Materials: Potential Challenges and<br />
Applications<br />
•Design and Analysis of Composites<br />
•Export Control: Basics and Impact<br />
on Materials<br />
•Introduction to Advanced<br />
Composites Materials and Processes<br />
•Molecular Modeling Introduction:<br />
Tool for Material Scientists and<br />
Engineers<br />
Keynote Address<br />
8:30 AM – 9:45 AM<br />
The Evolution of Automotive Composites-From<br />
Art to Science<br />
Barbara A. Sanders, Director of<br />
Advanced Development and Engineering<br />
Processes, Delphi Thermal<br />
Systems<br />
Sessions<br />
10:00 AM<br />
•Aerospace Coatings<br />
•New Metallic Materials<br />
•Nanomaterials I: Characterization<br />
•Resin and Process Development I<br />
•Propulsion I: High Temperature<br />
Technologies*<br />
Sessions<br />
8:00 AM<br />
•Liquid Molding<br />
•Spacecraft Materials*<br />
•Computational Materials Science II<br />
•University Research in<br />
Nanocomposites I<br />
•Propulsion II: High Temperature<br />
Resins*<br />
Sessions<br />
8:00 AM<br />
•Propulsion III: Textile Preforming*<br />
•Electrical Properties and<br />
Nanocomposites I*<br />
•Morphing I: Morphing & Adaptive<br />
Materials Applications & Challenges<br />
•Composite Repair<br />
•Nanomaterials IV: Synthesis and<br />
Processing<br />
Luncheon<br />
11:30 AM – 1:00 PM<br />
The Science of Art Conservation<br />
Stephen Bonadies, Chief Conservator,<br />
<strong>Cincinnati</strong>, Art Museum<br />
Hall of Mirrors, <strong>Cincinnati</strong> Hilton<br />
Netherland Plaza<br />
Exhibits Closed<br />
Exhibits 10:00 AM - 4:00 PM<br />
Exhibits 10:00 AM - 4:00 PM<br />
Exhibits Closed<br />
Tutorials**<br />
1:00 PM – 5:00 PM<br />
•Jet Engines 101: M&P Technology<br />
(and tour of GE Learning Centre)<br />
2:00 PM – 5:00 PM<br />
•Carbon Science & Technology:<br />
Carbons, Carbon Fibers, C-C<br />
Composites and Nanotubes<br />
•Infusion Processing: Today’s Closed<br />
Mold Methodologies<br />
•Morphing Technology: Advancing<br />
Systems Performance Beyond Stateof-the-Art<br />
•Nanotechnology: Health and Safety<br />
Overview<br />
•Test Methods for Composites<br />
**Tutorials require an additional fee.<br />
Sessions<br />
1:30 PM<br />
•Fire Protection<br />
•Nanomaterials II: Characterization<br />
•Computational Materials Science I<br />
•Nanomaterials III: Devices &<br />
Applications<br />
•Resin and Process Development II<br />
Panel<br />
1:30 PM<br />
•Composite Materials for Propulsion:<br />
Challenges for the Next Generation<br />
Low Cost and High Performance<br />
Applications Panel<br />
Welcome Reception<br />
5:00 PM – 6:30 PM<br />
Hall of Mirrors, <strong>Cincinnati</strong> Hilton<br />
Netherland Plaza<br />
Sessions<br />
1:00 PM<br />
•Testing Methods*<br />
•Adhesive Bonding<br />
•Computational Materials Science III<br />
•University Research in<br />
Nanocomposites II*<br />
•Tooling and Non-Destructive<br />
Evaluation<br />
Panels<br />
1:00 PM<br />
•Morphing and Adaptive Structures -<br />
Challenges and Opportunities<br />
2:30 PM<br />
•Challenges and Barriers for<br />
Technology Insertion of Nanomaterials<br />
in Aerospace Applications<br />
Riverboat Cruise<br />
6:00 PM – 9:30 PM<br />
Sessions<br />
1:00 PM<br />
•Electrical Properties and<br />
Nanocomposites II*<br />
•Morphing II: Novel Morphing<br />
Composite Resin and Reinforcement<br />
•High Performance Fibers*<br />
•Propulsion IV: Impact and Dynamic<br />
Behavior in Propulsion<br />
Panel<br />
1:00 PM<br />
•Design as a Fundamental Process for<br />
Transdisciplinarity “Art to Science”:<br />
Educating Engineers<br />
ITAR<br />
* Session includes ITAR Restricted Papers<br />
General Co-Chairs<br />
Dr. Tia Benson Tolle, Air Force Research Lab<br />
Dr. Michael V. McCabe, University of Dayton<br />
Technical <strong>Program</strong> Co-Chairs<br />
Dr. Karla L. Strong, Air Force Research Lab<br />
Dr. Donald A. Klosterman, University of Dayton Research Institute<br />
Technical <strong>Program</strong> Assistant<br />
Warren Ronk<br />
Administrative Assistant for the Organizing<br />
Committee<br />
Danita Nelson, University of Dayton<br />
Sponsorship Chair<br />
Dr. Charles Browning, University of Dayton<br />
Venue and Arrangements Chair<br />
Dr. Jennifer C. Fielding, Air Force Research Lab<br />
—4<br />
Our Organizing Committee–Thank You!<br />
Banquet Chair<br />
Ben A. Dietsch, Cornerstone Research Group<br />
Food and Refreshments Chair<br />
Dr. Katie Thorp, Air Force Research Lab<br />
Audio-Visuals Co-Chairs<br />
Patrick Lake, Applied Sciences Inc.<br />
Matt Pierson, University of Dayton Research Institute<br />
Volunteers Co-Chairs<br />
Doug Ward, GE Aviation<br />
Todd Bullions, GE Aviation<br />
Publicity Co-Chairs<br />
Pamela Gregg, University of Dayton Research Institute<br />
George F. Schmitt, Air Force Research Lab<br />
Finance Chair<br />
Prof. James Johnson, Sinclair Community College<br />
Art Contest and Calendar Co-Chairs<br />
Dr. Jennifer C. Fielding, Air Force Research Lab<br />
Dr. Katie Thorp, Air Force Research Lab<br />
Europe Communications Liaison<br />
Prof. Adrie Kwakernaak, Delft University of Technology<br />
Asia Communications Liaison<br />
Dr. Nobuhide Teranishi, SAMPE Japan<br />
Transportation Chair<br />
Greg A. Karst, Cornerstone Research Group<br />
Special Arrangements Chair<br />
Kristin Muckley-Cable, Cornerstone Research Group
Hotel Layout<br />
Volunteer<br />
Room<br />
Note: The Rue Reolan room is located on the street level of the <strong>Cincinnati</strong> Hilton Netherland Plaza.<br />
What’s Special in the Exhibit Hall?<br />
Art Gallery in the Pavilion Room<br />
Featuring our Art Contest winners and entries. Come see the beautiful and creative art<br />
presentations from SAMPE members.<br />
Rosewood (internet) Lounge<br />
Internet access in a comfortable setting in the Rosewood exhibit area. Stop by and check<br />
your email with or without your laptop. Open on Tuesday and Wednesday only (10:00 AM<br />
- 4:00 PM).<br />
Mid Morning Coffee and Afternoon Water Services<br />
Coffee Service<br />
Available in the Hall of Nations Tuesday at 9:30 AM, and Wednesday and Thursday at 7:30<br />
AM.<br />
Available in the Rookwood and Rosewood Rooms on Tuesday and Wednesday morning at<br />
10:00 AM.<br />
Water Service<br />
Available in the Rookwood and Rosewood Rooms on Tuesday and Wednesday afternoon at<br />
2:00 PM.<br />
EXHIBITORS, EXHIBITORS, EXHIBITORS<br />
Be sure to tour all three exhibit areas to discover innovative and important products and<br />
services. Walk through the exhibit areas and talk to the exhibitors in the Rosewood, Rookwood<br />
and Pavilion Rooms.<br />
5—
Specialized Conference Tracks<br />
Addressing the constant advancements being made in the materials and processes industry, four specialized tracks<br />
have been added to the SAMPE Fall Technical Conference. These extremely focused tracks, Nanomaterials, Morphing<br />
Materials & Structures, Propulsion Materials and Computational Material Science, feature comprehensive tutorials,<br />
panels and high quality technical sessions. Design your curriculum from this unparalleled conference programming.<br />
Nanotechnology<br />
Monday, October 29<br />
Tutorial<br />
9:00 AM - Noon Room: Salon H&I<br />
Carbon Nanotube Enabled Materials: Potential Challenges<br />
and Applications*<br />
Satish Kumar, Georgia Institute of Technology, Atlanta, GA<br />
Tutorial<br />
2:00 PM - 5:00 PM Room: Salon H&I<br />
Nanotechnology: Health and Safety Overview*<br />
Lynn Bowman, University of Dayton Research Institute, Dayton, OH<br />
Tuesday, October 30<br />
10:00 AM Room: Salon H&I<br />
Nanomaterials I: Characterization–Session<br />
Session Chair: Peter Lillehei, NASA Langley Research Center, Hampton,<br />
VA<br />
1:30 PM Room: Salon H&I<br />
Nanomaterials II: Characterization–Session<br />
Session Chair: Peter Lillehei, NASA Langley Research Center, Hampton,<br />
VA<br />
1:30 PM Room: Salon D&E<br />
Nanomaterials III: Devices & Applications–Session<br />
Session Chair: Liming Dai, University of Dayton, Dayton, OH<br />
Wednesday, October 31<br />
8:00 AM Room: Salon H&I<br />
University Research in Nanocomposites I–Session<br />
Session Chair: Gail Hahn, Boeing, Berkeley, MO<br />
1:00 PM Room: Salon H&I<br />
University Research in Nanocomposites II–Session<br />
Session Chair: Gail Hahn, Boeing, Berkeley, MO<br />
2:30 PM Room: Salon H&I<br />
Challenges and Barriers for Technology Insertion of Nanomaterials<br />
in Aerospace Applications–Panel<br />
Moderator: Dr. Peter Lillehei, NASA Langley Research Center, Hampton,<br />
VA<br />
Thursday, November 1<br />
8:00 AM Room: Salon B&C<br />
Electrical Properties and Nanocomposites I**–Session<br />
Session Chair: Max Alexander, AFRL, WPAFB, OH<br />
8:00 AM Room: Salon H&I<br />
Nanomaterials IV: Synthesis and Processing–Session<br />
Session Chairs: Enrique Barrera, Rice University, Houston, TX and<br />
Don Klosterman, University of Dayton, Dayton, OH<br />
1:00 PM Room: Salon B&C<br />
Electrical Properties and Nanocomposites II**–Session<br />
Session Chair: Jennifer Fielding, AFRL/MLBCO, Wright Patterson<br />
AFB, OH<br />
Save the Dates:<br />
2007<br />
27-30 November<br />
10 th Japan International SAMPE Symposium & Exhibition<br />
(JISSE-10), Big Sight Convention Center, Tokyo, Japan<br />
9-12 December<br />
4 th International Conference on Science & Technology of<br />
Composite Material - COMAT 2007, Rio de Janeiro, Brazil<br />
2008<br />
11-13 February<br />
SAMPE Asia 2008, Shangri-La Hotel, Bangkok, Thailand<br />
31 March - 2 April<br />
SAMPE Europe - SEICO 08 - Hotel Mercure Paris and Porte de<br />
Versaille Expo, Paris<br />
18-22 May<br />
SAMPE ’08, Long Beach Convention Center, Long Beach, California<br />
8-11 September<br />
SAMPE Fall Technical Conference 2008, Memphis, Tennessee<br />
18-19 September<br />
SAMPE Europe Technical Conference SETEC ’08,<br />
Augsburg, Germany<br />
For more information on SAMPE’s upcoming events, visit www.sampe.org<br />
SAMPE–Taking M&P Around the World<br />
—6
Propulsion<br />
Monday, October 29<br />
Tutorial<br />
1:00 PM - 5:00 PM<br />
Jet Engines 101: M&P Technology (and tour of GE Learning<br />
Centre*), Brant Simmons, GE Aviation, <strong>Cincinnati</strong>, OH<br />
The bus will load at 1:00 sharp at the <strong>Cincinnati</strong> Hilton Netherland<br />
Plaza's 5th Street entrance.<br />
Tuesday, October 30<br />
10:00 AM Room: Rue Reolan<br />
Propulsion I: High Temperature Technologies-Session<br />
Session Chairs: Joe Dwyer, Rolls Royce and Fred Arnold, AFRL,<br />
WPAFB, OH<br />
1:30 PM Room: Rue Reolan<br />
Composite Materials for Propulsion: Challenges for the Next<br />
Generation Low Cost and High Performance Applications-<br />
Panel<br />
Moderator: Doug Ward, Consulting Engineer, Composites GE Aviation,<br />
<strong>Cincinnati</strong>, OH<br />
Wednesday, October 31<br />
Room: Rue Reolan<br />
8:00 AM Propulsion II: High Temperature Resins-Session<br />
Session Chairs: Bob Gray, Maverick Corp., Blue Ash, OH and Warren<br />
Ronk, SAMPE Technical <strong>Program</strong> Assistant, <strong>Cincinnati</strong>, OH<br />
Thursday, November 1<br />
8:00 AM Room: Capris 1&4<br />
Propulsion III: Textile Preforming-Session**<br />
Session Chairs: Kory Abbitt, Hexcel, Yellow Springs, OH and<br />
Mike Braley, AFRL/MLMP, WPAFB, OH<br />
1:00 PM Room: Capris 1&4<br />
Propulsion IV: Impact and Dynamic Behavior in Propulsion-<br />
Session<br />
Session Chairs: Ming Xie, GE Aviation, <strong>Cincinnati</strong>, OH and<br />
Dale Hopkins, NASA Glenn Research Center, Cleveland, OH<br />
Mid Morning Coffee and Afternoon Water Services<br />
Coffee Service<br />
Available in the Hall of Nations Tuesday at 9:30 AM, and<br />
Wednesday and Thursday at 7:30 AM.<br />
Available in the Rookwood and Rosewood Rooms on Tuesday and<br />
Wednesday morning at 10:00 AM.<br />
Water Service<br />
Available in the Rookwood and Rosewood Rooms on Tuesday and<br />
Wednesday afternoon at 2:00 PM.<br />
Computational Materials Science<br />
Monday, October 29<br />
Tutorial<br />
9:00 AM - Noon Room: Salon M<br />
Design and Analysis of Composites*<br />
Steve Donaldson, University of Dayton, Dayton, OH<br />
Tutorial<br />
9:00 AM - Noon Room: Salon D&E<br />
Molecular Modeling Introduction: Tools for Material<br />
Scientists and Engineers*<br />
Soumya Patnaik, Air Force Research Laboratory, WPAFB, OH<br />
Tuesday, October 30<br />
Room: Salon F&G<br />
1:30 PM Computational Materials Science I-Session<br />
Session Chairs: Soumya Patnaik and Barry Farmer, AFRL, WPAFB, OH<br />
Wednesday, October 31<br />
8:00 AM Room: Salon F&G<br />
Computational Materials Science II-Session<br />
Session Chairs: Soumya Patnaik and Barry Farmer, AFRL, WPAFB, OH<br />
1:00 PM Room: Salon F&G<br />
Computational Materials Science III-Session<br />
Session Chairs: Soumya Patnaik and Barry Farmer, AFRL, WPAFB, OH<br />
Morphing<br />
Monday, October 29<br />
Tutorial<br />
2:00 PM - 5:00 PM Room: Salon B&C<br />
Morphing Technology: Advancing Systems Performance Beyond<br />
State-of-the-Art, Ernie Havens and Tat H. Tong, Ph.D, Cornerstone<br />
Research Group, Inc., Dayton, OH<br />
Wednesday, October 31<br />
1:00 PM Room: Rue Reolan<br />
Morphing and Adaptive Structures - Challenges and<br />
Opportunities-Panel<br />
Moderator: Jeff Baur, AFRL/MLBC, Wright Patterson AFB, OH<br />
Thursday, November 1<br />
8:00 AM Room: Salon D&E<br />
Morphing & Adaptive Materials I: Applications and<br />
Challenges-Session<br />
Session Chair: Pat Mather, Syracuse University, Syracuse, NY<br />
1:00 PM Room: Salon D&E<br />
Morphing & Adaptive Materials II: Novel Resins and<br />
Reinforcements-Session<br />
Session Chair: Doug Campbell, Composite Technology Development,<br />
Inc., Lafayette, CO<br />
*All Tutorials require an additional fee<br />
** Session includes ITAR papers<br />
7—
General Information<br />
Registration Hours<br />
Monday, October 29 7:30 AM – 5:00 PM<br />
Tuesday, October 30 7:30 AM – 5:00 PM<br />
Wednesday, October 31 7:30 AM – 5:00 PM<br />
Thursday, November 1 7:30 AM – 1:30 PM<br />
The SAMPE Registration area is located on the fourth floor of the<br />
<strong>Cincinnati</strong> Hilton Netherland Plaza Hotel.<br />
Exhibit Hours<br />
Tuesday, October 30 10:00 AM – 4:00 PM<br />
Wednesday, October 31 10:00 AM – 4:00 PM<br />
Exhibits are located in the Rookwood Room, Pavilion Room and the<br />
Rosewood Room on the fourth floor of the <strong>Cincinnati</strong> Hilton Netherland<br />
Plaza Hotel. Exhibits are closed Monday and Thursday.<br />
On-site Registration<br />
Do not fill out the pre-registration form that is in the Preliminary <strong>Program</strong>.<br />
You must fill out an on-site registration form when you are ready to<br />
register. Payment in full must be made at the time of registration.<br />
Acceptable forms of payment are cash, check, VISA, MasterCard or<br />
American Express.<br />
Exhibits Hall Admission<br />
ALL MUST BE REGISTERED AND BADGED TO ENTER THE EXHIBIT<br />
HALL. Conference registrants are automatically admitted to the exhibits<br />
with their badges. Exhibit hall admission is free, and those not attending<br />
the conference, but who desire admission, must register at the SAMPE<br />
registration area on the fourth floor of the <strong>Cincinnati</strong> Hilton Netherland<br />
Plaza Hotel.<br />
Exhibit Hall Rules<br />
People under 13 years of age are not permitted on the exhibit floor at<br />
any time regardless of affiliation or circumstances. This rule applies to<br />
exhibitors as well as attendees.<br />
Photos may only be taken with the permission of the booth personnel.<br />
There is no smoking in the Convention Center.<br />
ITAR Clearance<br />
Bring the required identification, proof of employment and<br />
ITAR<br />
certification credentials as listed on page 9, to the SAMPE<br />
Clearance counter at the SAMPE Registration area. Your documents<br />
will be verified and you will be provided with a stamp indicating your<br />
ITAR clearance. Photo ID will be checked against your ITAR badge<br />
before admittance is granted to any ITAR presentation.<br />
Cancellation/Refund/Substitution Policy<br />
No refund will be given for failure to attend, late arrival, unattended<br />
events or early departure from the meeting. Refund requests must be in<br />
writing in advance of the show according to the refund guidelines.<br />
Refunds are processed after the conference. There is no charge for<br />
making a substitution. The appropriate member/non-member rate will<br />
apply to the attending substitute.<br />
Session Chairs, Panel Moderators, and Speakers Meeting,<br />
Salon A.<br />
It is very important that all paper presenters, session chairs, panel<br />
moderators and panelists attend the speakers meeting at 7:00 A.M.<br />
on the day of your session, presentation or panel. This will provide you<br />
with the opportunity to meet the other session/panel participants,<br />
coordinate with your session chair or panel discussion moderator,<br />
arrange for pre-loading of presentations, and also hear announcements<br />
from the technical program chairs.<br />
Notes<br />
Attire at all events is business casual.<br />
All presentations are in English.<br />
If you have a disability and require special needs, please note them on<br />
our registration form.<br />
Volunteer Center-Director’s Room, in the Registration Room<br />
on the 4 th floor foyer behind the SAMPE registration counter.<br />
Check in here for your assignment and instructions.<br />
For Further Information Contact:<br />
SAMPE<br />
1161 Park View Drive, Suite 200, Covina, CA 91724-3751<br />
Phone: +1 626.331.0616 • Fax: +1 626.332.8929 • Website:<br />
www.sampe.org<br />
Registration: Priscilla Heredia, ext. 610 • E-Mail: priscilla@sampe.org<br />
Exhibits: Karen Chapman, ext. 616 • E-Mail: karen@sampe.org<br />
Membership: Patricia Padelford, ext. 632 • E-Mail: patricia@sampe.org<br />
No Phones, Cameras or Recording<br />
For the courtesy of our speakers, no phones, cameras or recording<br />
devices are permitted during any conference program.<br />
—8
Monday, October 29<br />
Tutorials*<br />
9:00 AM-Noon<br />
Room: Salon B&C<br />
Export Control: Basics and Impact on Materials, James Hunter, Air Force<br />
Office of Scientific Research, AFOSR, Arlington, VA<br />
Room: Salon D&E<br />
Molecular Modeling Introduction: Tools for Material Scientists and Engineers,<br />
Soumya Patnaik, Air Force Research Laboratory, WPAFB, OH<br />
Room: Salon F&G<br />
Introduction to Advanced Composites Materials and Processes, Charles<br />
Browning, University of Dayton, Dayton, OH<br />
Room: Salon H&I<br />
Carbon Nanotube Enabled Materials: Potential Challenges and Applications,<br />
Satish Kumar, Georgia Institute of Technology, Atlanta, GA<br />
Room: Salon M<br />
Design and Analysis of Composites, Steve Donaldson, University of Dayton,<br />
Dayton, OH and Thomas J. Whitney, University of Dayton Research Institute,<br />
Dayton, OH<br />
1:00 PM - 5:00 PM<br />
Jet Engines 101: M&P Technology (and tour of GE Learning Centre), Brant<br />
Simmons, GE Aviation, <strong>Cincinnati</strong>, OH<br />
The bus will load at 1:00 sharp at the <strong>Cincinnati</strong> Hilton Netherland Plaza’s 5 th Street<br />
entrance.<br />
2:00 PM - 5:00 PM<br />
Room: Salon H&I<br />
Nanotechnology: Health and Safety Overview, Lynn Bowman, University of<br />
Dayton Research Institute, Dayton, OH<br />
Room: Salon B&C<br />
Morphing Technology: Advancing Systems Performance Beyond Stateof-the-Art,<br />
Ernie Havens and Tat H. Tong, Ph.D, Cornerstone Research Group,<br />
Inc., Dayton, OH<br />
Room: Salon D&E<br />
Infusion Processing: Today's Closed Mold Methodologies,<br />
Scott Beckwith, BTG Composites, Inc., Taylorsville, UT<br />
Room: Salon F&G<br />
Carbon Science & Technology: Carbons, Carbon Fibers, C-C<br />
Composites and Nanotubes, Khalid Lafdi, University of Dayton, Dayton, OH<br />
Room: Salon M<br />
Test Methods for Composites, Donald Adams, Wyoming Test Fixtures, Inc.,<br />
Salt Lake City, UT<br />
*All Tutorials require additional fee.<br />
Important session information for all attendees.<br />
SAMPE Restricted Papers —ITAR Regulations Session Admittance<br />
(REVISED PROCEDURES 6/05)<br />
Several papers to be presented at this conference will be restricted papers governed by ITAR (International Traffic in Arms Regulations). The U.S. citizens SAMPE<br />
list used at previous conferences will not be available. If you plan to attend any presentations restricted by ITAR, you must bring proof of citizenship plus the other<br />
verification documents as shown below. Please note that only U.S. citizens and U.S. Resident Aliens can be considered for attendance at these restricted presentations.<br />
Admittance to restricted sessions and access to restricted technical papers is implemented and controlled by U.S. International Traffic in Arms Regulations (ITAR). All<br />
restricted session attendees MUST abide by the procedures and submittal of verification documents as noted below – no exceptions:<br />
ITAR<br />
ATTENDEE CLASSIFICATION<br />
IDENTIFICATION & PROOF OF EMPLOYMENT REQUIREMENTS<br />
U.S. Government Employees<br />
U.S. Citizens<br />
Resident Aliens (U.S.)<br />
1. Proof of Citizenship (for example, passport, birth certificate, voters registration card, naturalization papers), and,<br />
2. Personal photographic identification (passport, driver’s license, corporate ID, etc.)<br />
1. Proof of Citizenship (for example, passport, birth certificate, voters registration card, naturalization papers), and,<br />
2. Personal photographic identification (passport, driver’s license, corporate ID, etc.), and,<br />
3. Certification credentials based on DD Form 2345 (see below for details)<br />
1. Resident Alien Card, and,<br />
2. Personal photographic identification (passport, driver’s license, corporate ID, etc.), and,<br />
3. Certification credentials based on DD Form 2345 (see below for details)<br />
DD Form 2345 individual certification credentials (required for U.S. & Resident Aliens) must be from one of the following:<br />
1. Copy of an approved and active DD Form 2345 for the individual, or,<br />
2. Copy of an approved and active DD Form 2345 for the individual’s employer PLUS evidence of current employment status with that employer (corporate ID, business card, etc.), or,<br />
3. A listing of the individual’s employer in the most recent DoD quarterly Qualified U.S. Contractor Access List PLUS evidence of current employment status with that employer (corporate<br />
ID, business card, etc.).<br />
DD Form 2345 may be downloaded and completed online in order to apply for approval to be listed on the Qualified U.S. Contractor List, www.dlis.dla.mil/jcp/. Allow at least 4 weeks<br />
prior to the SAMPE symposia or technical conference dates for this process.<br />
How to get your ITAR Clearance:<br />
Bring all of the above listed identification, proof of employment and certification credentials to the to the SAMPE Clearance counter at the SAMPE Registration area. Your<br />
documents will be verified and you will be provided with a stamp indicating your ITAR clearance. Photo ID will be checked against your ITAR badge before admittance<br />
is granted to any ITAR presentation.<br />
9—
Tuesday, October 30<br />
Keynote<br />
8:30 AM - 9:45 AM<br />
Hall of Mirrors, <strong>Cincinnati</strong> Hilton Netherland Plaza, 3 rd floor<br />
The Evolution of Automotive Composites-From Art to<br />
Science<br />
Barbara A. Sanders<br />
Director of Advanced Development and Engineering Processes<br />
Delphi Thermal Systems, Troy, MI<br />
A view of the evolution of automotive composites gives a good perspective on how<br />
composite materials, in general, have evolved from an art to a science over the last<br />
thirty years. Automotive composite materials/technology started as an art form with<br />
formulations that were virtually "a pinch of this and a dash of that" and usually based<br />
upon a chemist or formulator's feel for what was right. Today science and analysis<br />
actually play a major role in how composites are developed and applied. For those<br />
of us who have watched the technology grow and change through the years, it is clear<br />
that there is much more sophistication and less of the "Let's try this and see" approach.<br />
This tremendous change in automotive composites reflects the focus for the<br />
discussion, while concurrently representing the trends in progress across the many<br />
other major industries with significant composite materials usage.<br />
Ms. Sanders has developed an extensive knowledge of polymers and composite<br />
materials during her 35 year career at General Motors and Delphi. She recently<br />
received the Lifetime Achievement Award from the SPE Automotive Division, an<br />
award only given five times before, and has also received the U.S. Black Engineer<br />
Award. She holds a masters degree in Physics from Rutgers University.<br />
Room: Salon B&C<br />
Aerospace Coatings–Session<br />
Session Chair: Steve Szaruga, AFRL/MLBT, WPAFB, OH<br />
10:00 AM A Silicone-Based Ice-Phobic Coating for Aircrafts, S.L. Sivas, B.<br />
Riegler, R. Thomaier, NuSil Technology LLC, Carpinteria, CA; K. Hoover, Pratt &<br />
Whitney, East Hartford, CT<br />
10:30 AM Development of Improved and Novel Thermal Control Coatings,<br />
A.I. Davis, C.A. Cerbus, University of Dayton Research Institute, Dayton,<br />
OH; J.A. Johnson, Air Force Research Laboratory - Materials & Manufacturing<br />
Directorate, Wright Patterson AFB, OH<br />
11:00 AM Electrochemical Properties of Multi-Functional Carbon<br />
Nanofiber/Polyimide Nanocomposite Coatings, J. Iroh, University of <strong>Cincinnati</strong>,<br />
<strong>Cincinnati</strong>, OH; L.-S. Tan, MLBP/AFRL, WPAFB, OH; H. Wang, University<br />
of Dayton Research Institute, Dayton, OH<br />
11:30 AM Characterization of Vapor Grown Carbon Nanofiber/<br />
Polyimide Nanocomposite Films, J. Iroh, University of <strong>Cincinnati</strong>, <strong>Cincinnati</strong>,<br />
OH; L.-S. Tan, MLBP/AFRL, WPAFB, OH; H. Wang, M. Hourz, G. Price, University<br />
of Dayton Research Institute, Dayton, OH<br />
Room: Salon D&E<br />
New Metallic Materials–Session<br />
Session Chair: Brad Lucht, Independent Consultant, Kansas City, MO<br />
10:00 AM Dehydrogenation Assisted Diffusion Bonding of Titanium<br />
Base Alloys, E.G. Baburaj, Clarkson Aerospace, La Branch, Houston, TX; V.<br />
Bhosle, North Carolina State University, Raleigh, NC; K. Salama, University of<br />
Houston, Houston, TX<br />
10:30 AM Characterization and Identification of Friction Stir Welded<br />
Aluminum 7136-T76511 Extrusions from Static and Dynamic Testing, K.V.<br />
Singh, B.C. Hamilton, T. Robbins, Miami University, Oxford, OH<br />
11:00 AM Synthesis and Consolidation of Nano-Sized NiCo Powder by<br />
Powder Technology Rout, W.M. Daoush, Central Metallurgical Research and<br />
Development Institute, Cairo, Helwan, Egypt<br />
Room: Salon H&I<br />
Nanomaterials I: Characterization–Session<br />
Session Chair: Peter Lillehei, NASA Langley Research Center, Hampton, VA<br />
10:00 AM Property Enhancement of Epoxy Matrix by Adding Graphitic<br />
Nanofibers, S. Jana, W.H. Zhong, North Dakota State University, Fargo, ND<br />
10:30 AM Characterization of Amine Functionalized Multi-Walled Carbon<br />
Nanotubes Epoxy-Based Nanocomposites, S.B. Young, M. Theodore,<br />
M.V. Hosur, S. Jeelani, Tuskegee University, Tuskegee, AL<br />
11:00 AM Nanoscale Subsurface Imaging of Nanocomposites via Resonant<br />
Difference-Frequency Atomic Force Ultrasonic Microscopy, S.A.<br />
Cantrell, J.H. Cantrell, P.T. Lillehei, NASA Langley Research Center, Research and<br />
Technology Directorate, Hampton, VA<br />
11:30 AM UV and Rheopectic Behavior of Polysiloxane-clay Hybrid<br />
Nanocomposites for Uses in Sunscreen Products, J. Iroh, T. Nelson, University<br />
of <strong>Cincinnati</strong>, <strong>Cincinnati</strong>, OH<br />
Room: Salon M<br />
Resin and Process Development I–Session<br />
Session Chairs: Susan Robitaille, NanoSperse, Benicia, CA and Stephen Darfler,<br />
Hexcel, Dublin, CA<br />
10:00 AM Photodegradation Behavior of Long Fiber Thermoplastic (LFT)<br />
Composites, A. Goel, K.K. Chawla, U.K. Vaidya, D.R. Dean, University of Alabama<br />
at Birmingham, Birmingham, AL<br />
10:30 AM Mechanical Characterization of Bio-Based Polyurethane/E-<br />
Glass Composites, J.S. Tate, J. Massingill, P. Patel, P. Rikka, S. Arabie, Texas State<br />
University-San Marcos, San Marcos, TX<br />
11:00 AM Porosity Effects in Low Profile Additives (LPA) Based Polyesters,<br />
M.K. Saraswat, K.M.B. Jansen, L.J. Ernst, Technical University of Delft, Delft,<br />
Zuid Holland, Netherlands; R. Grimbergen, DSM Composites Resin, Zwolle, The<br />
Netherlands; F. Lauterwasser, DSM Composites Resin Deuschland GmbH,<br />
Ludwigshafen, Germany<br />
11:30 AM Functionally Graded Foam Material System for Energy Absorption,<br />
M.K. Hossain, Q. Liu, B.J. O'Toole, University of Nevada Las Vegas, Las<br />
Vegas, NV<br />
Room: Rue Reolan<br />
Propulsion I: High Temperature Technologies–Session<br />
Session Chairs: Joe Dwyer, Rolls Royce and Fred Arnold, AFRL, WPAFB, OH<br />
10:00 AM Environmental Durability of Polyimide Matrix<br />
Composites with High-Temperature Finishes, R.E. Allred, A.E.<br />
Hoyt Haight, J.-M. Gosau, J.P. Barlow, Adherent Technologies, Inc.,<br />
Albuquerque, NM<br />
10:30 AM Improving the Hygrothermal Durability of Addition<br />
Cure Polyimide Matrix Composites, J.E. Lincoln, D.B. Curliss,<br />
S. Hout, T.J. Brown, Performance Polymer Solutions Inc., Centerville,<br />
OH<br />
11:00 AM High Temperature Sizing for Carbon Fiber Reinforced<br />
Fluorinated Addition Polyimide Composites, A.E. Brink,<br />
M.H. Brink, Hydrosize Technologies, Inc., Raleigh, NC; M.J. Rich, L.<br />
Drzal, Michigan State University, East Lansing, MI<br />
11:30 AM Low Volatile, Addition Cure Polyimide Adhesives<br />
Based Technology, A.K. Javorina, J.E. Lincoln, D.B. Curliss, S.L.<br />
Hout, J.M. Williamson, Performance Polymer Solutions Inc.,<br />
Centerville, OH<br />
ITAR<br />
ITAR<br />
ITAR<br />
ITAR<br />
—10
Tuesday, October 30<br />
Room: Salon B&C<br />
Fire Protection–Session<br />
Session Chairs: Alex Morgan, University of Dayton Research Institute, Dayton, OH<br />
and Anteneh Worku, The Dow Chemical Company, Freeport, TX<br />
1:30 PM Micro Combustion Calorimeter Measurements on Flame Retardant<br />
Polymeric Materials, A.B. Morgan, University of Dayton Research Institute,<br />
Dayton, OH<br />
2:00 PM Flammability, Smoke and Toxic Gas Response of Novel Treated<br />
End-Grain Balsa Core Materials, K. Feichtinger, Alcan Baltek, Corporation,<br />
Northvale, NJ; R. Gätzi, Alcan Airex AG, Sins, Switzerland; W. Ma, Owens-Corning,<br />
Elkart, IN<br />
2:30 PM Thermal Decomposition of Polymers in Nitrogen and in Air, K.L.<br />
Erickson, Sandia National Laboratories, Albuquerque, NM<br />
3:00 PM Study of Flame Retardancy of Carbon Nanofiber Paper Sheets<br />
in Glass Fiber-Reinforced Polyester Composites, J. Gou, Z. Zhao, University<br />
of Central Florida, Orlando FL<br />
3:30 PM Fire Retardant Intumescent Polyamide 11 Nanocomposites, J.H.<br />
Koo, S. Lao, H. Jor, K. Nguyen, University of Texas at Austin; A. Morgan, University<br />
of Dayton Research Institute, Dayton, OH; G. Wissler, L. Pilato, KAI, Inc., Austin,<br />
TX; Z.P. Luo, Texas A&M University, College Station, TX<br />
Room: Salon H&I<br />
Nanomaterials II: Characterization–Session<br />
Session Chair: Peter Lillehei, NASA Langley Research Center, Hampton, VA<br />
1:30 PM Mechanical and Thermal Properties of Epoxy Based Composites<br />
with POSS Modified Carbon Nanotubes, V.K. Rangari, W.D. Jones, S.<br />
Jeelani, Tuskegee University, Tuskegee, AL<br />
2:00 PM Characterization of Mechanical Properties of Thermoplastic<br />
Nanocomposites Manufactured Using Pultrusion and VARTM, S. Roy, K.<br />
Narasimhan, University of Alabama, Tuscaloosa, AL; F. Hussain, University of<br />
British Columbia, Vancouver, BC, Canada<br />
2:30 PM Effect of Carbon Nanotubes on the Interfacial Shear Strength<br />
of T650/35 Carbon Fiber in an Epoxy Matrix Using the Single Fiber<br />
Fragmentation Test, R.J. Sager, P.J. Klein, L. Dai, D.C. Lagoudas, Texas A&M<br />
University, College Station, TX; Q. Zhang, J. Liu, L. Dai, University of Dayton,<br />
Dayton, OH; J. Baur, AFRL, Dayton, OH<br />
3:00 PM Dynamic Mechanical Properties of Carbon Nanofiber/Polyimide<br />
and Carbon Nanotube/Polyimide Nanocomposites, J.O. Iroh, J.L. Abot,<br />
H. Boddu, University of <strong>Cincinnati</strong>, <strong>Cincinnati</strong>, OH; L.-S. Tan, MLBP/AFRL, WPAFB,<br />
OH; H. Wang, M. Hourz, G. Price, University of Dayton Research Institute, Dayton,<br />
OH<br />
3:30 PM Carbon Nanotubes on Carbon Fibers: Influence of Growth<br />
Conditions on Fiber Tensile Properties, Q. Zhang, J. Liu, L. Dai, University of<br />
Dayton, Dayton, OH; R. Sager, Texas A&M University, College Station, TX; J. Baur,<br />
AFRL/MLBCO, Wright Patterson AFB, Dayton, OH<br />
4:00 PM Novel Carbon Nanotube Array-Reinforced Laminated Composite<br />
Material, J.L. Abot, Y. Song, M.J. Schulz, V.N. Shanov, University of <strong>Cincinnati</strong>,<br />
<strong>Cincinnati</strong>, OH<br />
4:30 PM Electrical and Barrier Properties of Exfoliated Graphite<br />
Nanoplatelet (xGnP) Reinforced Nanocomposites, H. Fukushima, K.<br />
Kalaitzidou, L.T. Drzal, Michigan State University, East Lansing, MI<br />
Room: Salon F&G<br />
Computational Materials Science I–Session<br />
Session Chairs: Soumya Patnaik and Barry Farmer, AFRL, WPAFB, OH<br />
1:30 PM Multiscale Analysis as Applied to Multi-Wall Carbon Nanotube<br />
Twisted Yarns, T.S. Gates, NASA Langley Research Center, Hampton, VA; G.D.<br />
Jefferson, S.-J.V. Frankland, National Institute of Aerospace, Hampton, VA<br />
2:00 PM Multiscale Constitutive Modeling of Polymer Materials, P. K .<br />
Valavala, G.M. Odegard, Michigan Technological University, Houghton, MI<br />
2:30 PM Finite Element Approaches to Mesoscopic Materials Modeling,<br />
A.A. Gusev, ETH Zurich, Zurich, Switzerland<br />
3:00 PM Morphing Structures and Dynamics with Particles, Chains, and<br />
Sheets, R.B. Pandey, University of Southern Mississippi, Hattiesburg, MS; K.L.<br />
Anderson, The Proctor & Gamble Company, <strong>Cincinnati</strong>, OH; B.L. Farmer, Air<br />
Force Research Laboratory, WPAFB, OH<br />
3:30 PM Molecular Dynamics Study of Thermal Conductivity of Curing<br />
Agent-W (DETDA), V. Varshney, Universal Technology Corporation, Dayton, OH;<br />
S. Patnaik, B. Farmer, A. Roy, Materials and Manufacturing Directorate, AFRL,<br />
Dayton, OH<br />
4:00 PM Peptide Binding to Sheet Silicates and Metal Nanonoparticles -<br />
Insight from Atomistic Simulation, H. Heinz, K.C. Jha, University of Akron,<br />
Akron, OH; B.L. Farmer, R.R. Naik, Materials and Manufacturing Directorate,<br />
Wright Patterson AFB, OH<br />
4:30 PM Dynamics of Hydrated Polymers, Effects of Hydration Level and<br />
Temperature, R. Berry, Air Force Research Laboratory, Wright Patterson AFB, OH;<br />
J. Moller, Miami University, Oxford, OH; M. Schwartz, University of North Texas,<br />
Denton, TX<br />
Room: Salon D&E<br />
Nanomaterials III: Devices & Applications–Session<br />
Session Chair: Liming Dai, University of Dayton, Dayton, OH<br />
1:30 PM Nanoneedles for Biomaterial Synthesis and Materials Characterization<br />
of Live Cells, M.M. Yazdanapanah, M. Hosseini, S. Pabba, B.H.<br />
Fasciotto, S.M. Berry, V.V. Dobrokhotov, A. Safir, R.S. Keynton, R.W. Cohn, University<br />
of Louisville, Louisville, KY<br />
2:00 PM Nanomaterials for Fuels Applications, C.E. Bunker, AFRL/PRTG,<br />
Wright Patterson AFB, OH; M.M. Stachler, B.A. Harruff, E.A. Guliants, University<br />
of Dayton Research Institute, Dayton, OH<br />
2:30 PM Modeling and Simulations of Carbon Nanotubes for Device<br />
Applications, A. Buldum, N.R. Paudel, University of Akron, Akron, OH; T. Ohashi,<br />
Honda Research Institute USA, Inc., Columbus, OH; L. Dai, University of Dayton,<br />
Dayton, OH<br />
3:00 PM Polymer and Aligned Carbon Nanotube Nanocomposites and<br />
Nanodevices, L. Qu, W. Chen, L. Dai, University of Dayton Research Institute,<br />
Dayton, OH; A. Roy, T. Benson Tolle, Air Force Research Laboratory, Materials and<br />
Manufacturing Directorate, MLBC, WPAFB, OH<br />
3:30 PM Processing of Carbon Nanotube/Al2O3 Composites by<br />
Nanoparticle Surface Plasma Polymerization, H. Cho, Y. Guo, D. Shi, Y.<br />
Song, J. Abot, University of <strong>Cincinnati</strong>, <strong>Cincinnati</strong>, OH; J. Lian, L. Wang, R.C.<br />
Ewing, University of Michigan, Ann Arbor, MI<br />
4:00 PM Manufacturing and Characterization of Powder-Coated Textile<br />
Fiber Fabric Preforms, K. Han, B. Rice, T. Glenchur, D. Johnson, University of<br />
Dayton Research Institute, Dayton, OH<br />
4:30 PM Nanomaterials for Space Power, R.P. Raffaelle, B.J. Landi, C. Cress,<br />
R. DiLeo, C. Schauerman, M. Giarra, J. Andersen, C. Bailey, S. Hubbard, Rochester<br />
Institute of Technology, Rochester, NY<br />
11—
Tuesday, October 30<br />
Room: Salon M<br />
Resin and Process Development II–Session<br />
Session Chairs: Stephen Darfler, Hexcel, Dublin, CA and Susan Robitaille, NanoSperse,<br />
Benicia, CA<br />
1:30 PM Process and Design Considerations for the Automated Fiber<br />
Placement Process, M. Favaloro, D. Hauber, Automated Dynamics, Schenectady, NY<br />
2:00 PM Robust Measurements and Modeling of Viscoelastic Properties<br />
of Carbon Fiber/Epoxy Prepreg During the Curing Process, P. Kashani, B.<br />
Minaie, Wichita State University, Wichita, KS; T. Rose, AvPro Inc., Norman, OK<br />
2:30 PM Formulating Challenges in Epoxy Based Infusion Systems for<br />
Aerospace Applications, J. Hoge, Huntsman Advanced Materials, The Woodlands,<br />
TX<br />
3:00 PM Elastomer Toughend Vinyl Esters, O. Plageman, D. Egan, Emerald<br />
Performance Materials, Brecksville, OH; A. Abu Obaid, University of Delaware,<br />
Newark, DE<br />
3:30 PM Updates for Transition Potential of Light Weight Composite<br />
Aircraft and Spacecraft Thermal Management Components, R. Watts, G.<br />
Maxwell, AFRL/MLBC, Centerville, HO; M. Steenwyk, J. Biels, GE Aviation, Grand<br />
Rapids, MI; W. Shih, Allcomp, Industry City, CA; S. Chang, Touchstone, Triadelphia,<br />
WV; T. Carroll, Triton Systems, Inc., Chelmsford, MA<br />
4:00 PM Esterification Effect on Mechanical and Swelling Properties of<br />
Natural Fiber/Polystyrene Composites, J.B. Naik, Dr. Babasaheb Ambedkar<br />
Marathwada University, Aurangabad, Maharashtra, India<br />
Room: Rue Reolan<br />
1:30 PM Composite Materials for Propulsion: Challenges for the Next<br />
Generation Low Cost and High Performance Applications–Panel<br />
Moderator: Doug Ward, Consulting Engineer, Composites GE Aviation, <strong>Cincinnati</strong>,<br />
OH<br />
Composite materials have been used in propulsion applications for over 25 years,<br />
but have been limited to primarily low temperature static structures. Weight savings,<br />
efficiency, and "green"considerations are driving material selection for the next generation<br />
of propulsion applications. This panel will discuss the challenges a moving<br />
to higher pay-off applications and specific barriers the composite materials and<br />
design community will have to overcome.<br />
Panelists:<br />
Paul Kukuchek, Director Research & Development, Goodrich<br />
Mike Schneider, Chief Consulting Engineer, Composites, GE Aviation<br />
Charlie Watson, Fellow, Composites, Pratt & Whitney<br />
John Welch, Associate Technical Fellow - Composite Structures, Spirit Aerospace<br />
5:00 PM - 6:30 PM<br />
Welcome Reception<br />
Hall of Mirrors, <strong>Cincinnati</strong> Hilton Netherland Plaza, 3 rd floor<br />
Our Welcome Reception is an industry hotspot. All badged attendees are welcome.<br />
—12
Wednesday, October 31<br />
Room: Salon B&C<br />
Liquid Molding–Session<br />
Session Chairs: Scott Reeve, National Composite Center, Cleveland OH and Jennifer<br />
Fielding, AFRL/MLBCO, WPAFB, OH<br />
8:00 AM Flow Simulations and Process Monitoring to Guide Advanced<br />
VARTM Manufacturing Techniques of Large Complex Composite Structures,<br />
J.M. Lawrence, S.T. Holmes, M. Louderback, A. Williams, V System<br />
Composities, Anaheim, CA; P. Simacek, S.G. Advani, University of Delaware,<br />
Newark, DE<br />
8:30 AM Monitoring Variations in Laminate Properties Through the Complete<br />
Resin Infusion Process, Q. Govignon, T. Allen, S. Bickerton, J. Morris, The<br />
University of Auckland, Auckland, New Zealand<br />
9:00 AM RTM of High Temperature Polymers for Engine Valves, R.T.<br />
Buckley, D.W. Radford, A. Grabher, Colorado State University, Fort Collins, CO<br />
9:30 AM Effects of Process Parameters in VARTM of High Temperature<br />
Polymer Composites Under High Humidity-High Temperature Working<br />
Condition, A. Khattab, University of Louisiana-Lafayette, Lafayette, LA; A.S. El-<br />
Gizawy, University of Missouri-Columbia, Columbia, MO<br />
10:00 AM Predicting Stress Distributions Exerted on LCM Tools Using<br />
Visco-Elastic Compaction Models, W.A. Walbran, S. Bickerton, P.A. Kelly, The<br />
University of Auckland, Auckland, New Zealand<br />
Room: Salon D&E<br />
Spacecraft Materials–Session<br />
Session Chair: Scott Peck, The Aerospace Corporation, El Segundo, CA<br />
8:00 AM Composite Materials for Radiation Shielding in the<br />
Materials on International Space Station Experiment (MISSE), ITAR<br />
F. Wong, J. Kesapradist, Space Systems/LoralSan Jose, CA; E. Benton,<br />
Eril Research, Inc., San Rafael, CA<br />
8:30 AM Nanomodified Carbon/Carbon Composites: Further Thermo-<br />
Oxidative Studies, J.H. Koo, S. Lao, H. Jor, University of Texas at Austin, Austin,<br />
TX; J. Lee, Agency for Defense Development, Daejeon City, Korea; L. Pilato, G.<br />
Wissler, KAI, LLC, Austin TX; Z.P. Luo, Texas A&M University, College Station, TX<br />
9:00 AM Enhancing Through-Thickness Thermal Conductivity in Sandwich<br />
Configuration with Carbon Foam Core, S. Sihn, D.P. Anderson, University<br />
of Dayton Research Institute, Dayton, OH; S. Ganguli, National Research<br />
Council, Washington D.C; A.K. Roy, Air Force Research Laboratory, WPAFB, OH<br />
9:30 AM Multifunctional Composite Structures for Space Satellites, T. Ozaki,<br />
H. Takeya, M. Kume, K. Sekine, Mitsubishi Electric Co., Sagamihara, Kanagawa, Japan<br />
Room: Salon F&G<br />
Computational Materials Science II–Session<br />
Session Chairs: Soumya Patnaik and Barry Farmer, AFRL, WPAFB, OH<br />
8:00 AM Advances in the Atomistic Modeling of Nanomaterials, S.B.<br />
Sinnott, University of Florida, Gainesville, FL<br />
8:30 AM Multiscale Modeling of Polymer Nanocomposites, A. Maiti,<br />
Lawrence Livermore National Laboratory, Livermore, CA<br />
9:00 AM Molecular Dynamics Simulations of Functionalized Carbon<br />
Nanofiber-Based Epoxy Nanocomposites, J. Gou, University of Central<br />
Florida, Orlando, FL; K. Anumakonda, University of South Alabama, Mobile, AL<br />
9:30 AM Atomistically Explicit Molecular Dynamics Simulation of Thermosetting<br />
Polymers, S. Christensen, Boeing - Phantom Works, Seattle, WA<br />
10:00 AM Crack Propagation in Highly Cross-Linked Polymers Under<br />
Uniaxial Deformation, M. Tsige, Southern Illinois University at Carbondale,<br />
Carbondale, IL; M.J. Stevens, Sandia National Laboratories, Albuquerque, NM<br />
10:30 AM Adding Self Healing Character to Polymeric Networks via Ionic<br />
Bonds: A Coarse-Grained Molecular Dynamics Simulation Study, T.E. Dirama,<br />
Universal Technology Corp., Dayton, OH; J.A. Johnson, Air Force Research Laboratory,<br />
Dayton, OH<br />
Room: Salon H&I<br />
University Research in Nanocomposites I–Session<br />
Session Chair: Gail Hahn, Boeing, Berkeley, MO<br />
8:00 AM Spectroscopic Imaging of Polymer Nanocomposites Containing<br />
Carbon Fillers, V.G. Hadjiev, University of Houston, Houston, TX; D.C.<br />
Davis, D.C. Lagoudas, Texas A&M University, College Station, TX; K.L. Strong,<br />
USAF AFRL/MLBCO, Wright Patterson AFB, OH<br />
8:30 AM Fabrication and Characterization of Epoxy Resin Containing<br />
Carbon Nanotubes, R. Donaldson, D. Klosterman, G. Ware, University of Dayton,<br />
Dayton, OH; M. Anderson, Central State University, Wilberforce, OH<br />
9:00 AM B-Staged Carbon Nanotube/Epoxy Films for the Improvement<br />
of Interlaminar Fracture Toughness, P.J. Klein, G.L. Warren, D.C. Lagoudas,<br />
R. Sager, H.-J. Sue, D.C. Lagoudas, Texas A&M University, College Station, TX<br />
9:30 AM Processing and Characterization of Epoxy/Carbon Fiber/Carbon<br />
Nanotube Multiscale Composites Fabricated Using VARTM, G. Ware,<br />
Y.-B. Park, C. Zhang, Z. Liang, B. Wang, Florida A&M University-Florida State<br />
University College of Engineering, Tallahassee, FL<br />
10:00 AM Improvement in Thermal, Mechanical and Electric Properties<br />
of Multi-Wall Carbon Nanotube Reinforced Epoxy and Carbon/Epoxy<br />
Composite, Y. Zhou, S. Jeelani, Tuskegee University, Tuskegee, AL; B. Eranezhuth,<br />
Clarkson Aerospace Corp. Houston, TX<br />
10:30 AM Characterization of the Dispersion of CNT in Epoxy by Using<br />
SEM Images of Fracture Surface, G. Strawder, Y. Zhou, M.I. Jeelani, S. Jeelani,<br />
Tuskegee University, Tuskegee, AL<br />
11:00 AM Mechanical Properties of Surface-Functionalized Epoxy/SWNT<br />
Nanocomposites, G.L. Warren, L. Sun, J.Y. O'Reilly, S.M. Lee, D. Davis, D.<br />
Lagoudas, H.J. Sue, Texas A&M University, College Station, TX<br />
11:30 AM Functionalization of SWNT Buckypapers Through Electron-<br />
Beam Irradiation, S. Wang, Texas Tech University, Lubbock, TX; R. Liang, Y. Xue,<br />
B. Wang, C. Zhang, FAMU-FSU College of Engineering, Tallahassee, FL<br />
Room: Rue Reolan<br />
Propulsion II: High Temperature Resins–Session<br />
Session Chairs: Bob Gray, Maverick Corp., Blue Ash, OH and Warren Ronk, SAMPE<br />
Technical <strong>Program</strong> Assistant, <strong>Cincinnati</strong>, OH<br />
8:00 AM Comparison of Thermo-Oxidative Behavior of<br />
High-Temperature Neat Resin Polyimides, G.P. Tandon, S. ITAR<br />
Putthanarat, University of Dayton Research Institute, Dayton, OH;<br />
K.V. Pochiraju, Stevens Institute of Technology, Hoboken, NJ; G. Schoeppner, AFRL/<br />
MLBC, Wright Patterson AFB, OH<br />
8:30 AM Alternate Monomer Suppliers for AFR-PE-4, R.A.<br />
ITAR<br />
Gray, J.R. Magato, R. Vannucci, Maverick Corporation, <strong>Cincinnati</strong>,<br />
OH<br />
9:00 AM Comparison of Low Cost Variant AFR-PE-4/AQ-III<br />
Composites for Hot Airframe Application, T. Gibson, R. Trejo, ITAR<br />
University of Dayton Research Institute, Dayton, OH; T. Storage, F.<br />
Arnold, A. Drain, AFRL/MLBC, Wright Patterson AFB, OH; M. Stoffel, Southwestern<br />
Ohio Council for Highter Education (SOCHE), Dayton, OH<br />
9:30 AM Evaluation of Tailorable Polyimide Composite in<br />
Aircraft Engine Environment, L. Shafer, D. Ward, GE Aviation, ITAR<br />
Evendale, OH; W. Ronk, Belcan Corporation, <strong>Cincinnati</strong>, OH<br />
10:00 AM Aging Durability and High Temperature Mechanical<br />
Performance of P2SI 900HT Composite Materials, S.L. Hout, J.E. Lincoln,<br />
D.B. Curliss, T.J. Brown, Performance Polymer Solutions Inc., Centerville, OH<br />
10:30 AM Alternative Alkyne-Based Materials for High Temperature<br />
Materials Applications, A.B. Morgan, University of Dayton Research Institute,<br />
Dayton, OH<br />
13—
Wednesday, October 31<br />
Room: Salon B&C<br />
Testing Methods–Session<br />
Session Chairs: Tom Whitney, University of Dayton Research Institute, Dayton, OH<br />
and Don Adams, Wyoming Test Fixtures, Salt Lake City, UT<br />
1:00 PM Consideration of Off Axis Ply Failure Strains in Determining<br />
Tensile Modulus of Angle Ply Laminates, T.A. Chenock, Jr., AGY, Science and<br />
Technology Group, Aiken, SC<br />
1:30 PM Effect of Boundary and Impact Mode on LOX Compatibility of<br />
Graphite Composites, R.Y. Kim, T.J. Whitney, J.C. Camping, Univeristy of Dayton<br />
Research Institute, Dayton, OH<br />
2:00 PM Effect of Specimen Thickness on Impact-Induced Delamination<br />
and CAI Behavior, Y. Aoki, H. Hatta, Japan Aerospace Exploration Agency,<br />
Mitaka, Tokyo, Japan; H. Kondo, Tokai University, Hiratsuka, Japan<br />
2:30 PM Factors Influencing Fatigue Delamination Initiation and Growth<br />
in Composites, L. Zheng, G. Rengarajan, W.C. Bushko, Y. Bao, GE Global<br />
Research Center, Niskayuna, NY<br />
3:00 PM Refined Model for Effective In-Plane Elastic Moduli and Poisson's<br />
Ratios of General Hexagonal Honeycombs, S. Balawi, J.L. Abot, University<br />
of <strong>Cincinnati</strong>, <strong>Cincinnati</strong>, OH<br />
Room: Salon D&E<br />
Adhesive Bonding–Session<br />
Session Chairs: Jim Mazza, AFRL/MLSA, WPAFB, OH and Dan McCray, University of<br />
Dayton Research Institute, Dayton, OH<br />
1:00 PM Improvements in Sol-Gel Surface Preparation Methods for Metal<br />
Bonding Applications, K. Blohowiak, J. Grob, W.B. Grace, N. Cejka, D. Berg,<br />
The Boeing Company, Seattle, WA<br />
1:30 PM Laser Pretreatment of Surfaces for Adhesive Bonding, C.T. Walters,<br />
Craig Walters Associates, Dublin, OH; J.A. Smith, University of Dayton Research<br />
Institute, Dayton, OH<br />
2:00 PM Improvement of Adhesive Bonding Between Similar and Dissimilar<br />
Materials with Micro-Column Arrays Formed by a Laser Assisted<br />
Surface Modification, E.G. Baburaj, Clarkson Aerospace Corporation, Houston,<br />
TX; D. Starikov, S. Paranjape, A. Bensaoula, Univeristy of Houston, Houston, TX<br />
2:30 PM Effect of Surface Engineering Processes on the Surface Properties<br />
and Adhesive Bonding of Graphite/Epoxy Composites, F.J. Boerio, B.<br />
Roby University of <strong>Cincinnati</strong>, <strong>Cincinnati</strong>, OH; R.G. Dillingham, Brighton Technologies<br />
Group, Inc., <strong>Cincinnati</strong>, OH; R.H. Bossi, The Boeing Company, Seattle,<br />
WA<br />
3:00 PM Effect of Atmospheric Plasma Treatment on the Surface Properties<br />
and Adhesive Bonding of Graphite/Epoxy Composites, R.G.<br />
Dillingham, B.R. Oakley, Brighton Technologies Group, Inc., <strong>Cincinnati</strong>, OH<br />
3:30 PM Formulation and Evaluation of Carbon Nanofiber-Based Conductive<br />
Adhesives-II, N. Gagliardi, B. Rice, K. Lindsay, University of Dayton<br />
Research Institute, Dayton, OH; E.M. Silverman, Northrop Grumman Space Technology,<br />
Redondo Beach, CA<br />
—14
Wednesday, October 31<br />
4:00 PM Silylated Polyurethane Adhesives: Next Generation Jet Fuel<br />
and Hydraulic Fluid Resistant PSA's, R. Griswold, R.L. Frye, Momentive Performance<br />
Materials, Wilton, CT<br />
4:30 PM Investigation on Delamination Strength of Double Lap Joint<br />
Between Steel Plate and CFRP, N. Yamamoto, M. Inomata, K. Yamagishi,<br />
Ishikawajima-Harima Heavy Industries Co., Ltd; K. Akinaga, K. Fujita, IHI Marine<br />
United Inc., Yokohama, Kanagawa, Japan<br />
Room: Salon F&G<br />
Computational Materials Science III–Session<br />
Session Chairs: Soumya Patnaik and Barry Farmer, AFRL, WPAFB, OH<br />
1:00 PM About the Composite Sandwich-Beams Calculus, M. Suciu, Mechanical<br />
Faculty, Technical University of Cluj-Napoca, Romania<br />
1:30 PM Physical Bounds on Material Properties of Laminated Composite<br />
Materials, S.O. Peck, The Aerospace Corporation, El Segundo, CA<br />
2:00 PM Numerical Investigation on Matrix Residual Stress Development<br />
of Polymeric Composites Manufactured with Resin Transfer Molding<br />
Process, K.-T. Hsiao, University of South Alabama, Mobile, AL<br />
2:30 PM Modeling the Thermal Performance of a Fiberglass Reinforced<br />
Plastic - Carbon Foam Sandwich Panel, G.J. Sowa, D.J. Miller, M. Segger, R.L.<br />
Shao, GrafTech International Ltd., Parma, OH; P. Hoekje, Consultant; H.<br />
GangaRao, West Virginia University, Morgantown, WV<br />
3:00 PM The Influence of Fiber Waviness on the Reduction of Critical<br />
Buckling Load of Composites Containing Fiber Waviness, H.G. Rai, E.V.<br />
Honein, M.I. Najjar, University of Balamand, Koura, North Lebanon<br />
3:30 PM Simulation Analysis of Parametric Effects on Consolidation of<br />
Angle Bended Composites, Y. Li, Z. Zhang, M. Li, Y. Gu, Beijing University of<br />
Aeronautics & Astronautics, Beijing, PR China<br />
Room: Salon H&I<br />
University Research in Nanocomposites II–Session<br />
Session Chair: Gail Hahn, Boeing, Berkeley, MO<br />
1:00 PM Instantaneous Electrodeposition of Metal Nanostructures on<br />
Mass Carbon Nanotubes, X. Wei, B. Dang, Y. Deng, R.L. Thomas, T.D. Phan,<br />
B.L. Wilson, Texas Southern University, Houston, TX; E.V. Barrera, Rice University,<br />
Houston, TX; J.C. Grunlan, Y.-S. Kim, Texas A&M University, College Station, TX; Y.<br />
Ying, Baylor College of Medicine, Houston, TX<br />
1:30 PM Dispersion of 3-(Diethoxymethylsilyl)Propylamine Side Wall<br />
Functionalized Carbon Nanotubes in Silica Using Sol-Gel Processing, Y.<br />
Edigin, L. Adams, A. Oki, P. Biney, Prairie View A&M University, Prairie View, TX; V.<br />
Khabashesku, Rice University, Houston, TX<br />
Room: Salon H&I<br />
2:30 PM - 5:00 PM<br />
Challenges and Barriers for Technology Insertion of Nanomaterials in<br />
Aerospace Applications-Panel<br />
Moderator: Peter Lillehei, NASA Langley Research Center, Hampton, VA<br />
This panel will focus around the factors that go into the decisions to accept<br />
nanomaterials in systems designs. Although nanomaterials hold great promise in<br />
solving difficult problems, there is a huge leap from fundamental research on a<br />
small scale to insertion into industrial, commercial systems. Both ends of the spectrum<br />
- materials developers and users, will benefit from an understanding of the<br />
challenges of technology maturation and insertion.<br />
Room: Salon M<br />
Tooling and Non-Destructive Evaluation–Session<br />
Session Chair: Brad Lucht, Independent Consultant, Kansas City, MO<br />
1:00 PM Carbon Fiber Polymer-Matrix Structural Composites for Sensing,<br />
S. Wang, D.D.L. Chung, University at Buffalo, State University of New York,<br />
Buffalo, NY<br />
1:30 PM Application of Reconfigurable Tooling to Complex Trapped<br />
Shapes and High-Temperature Cure, G. Calvert, K. Cao, T. Jacobson, T.<br />
Avery, 2Phase Technologies Inc., Santa Clara, CA; L.L. Clements, 2Phase Technologies<br />
Inc., Dayton, NV<br />
2:00 PM Carbon Foam Tooling for Aerospace Composites, M.S. Anghelescu,<br />
M.K. Alam, Ohio University, Athens, OH<br />
2:30 PM Nano-Composite Mold Design and Manufacturing; Part I:<br />
Design and Analysis, K. Han, B. Rice, University of Dayton Research Institute,<br />
Dayton, OH<br />
3:00 PM Nanotechnology Enabled Low Expansion Metal Coatings to<br />
Enhance the Durability of Composite Tooling, J.L. McCrea, R. Emrich, F.<br />
Gonzalez, G. Palumbo, Integran Technologies Inc., Toronto, ON, Canada<br />
1:00 PM<br />
Room: Rue Reolan<br />
Morphing and Adaptive Structures - Challenges and Opportunities-Panel<br />
Moderator: Jeff Baur, AFRL/MLBC, Wright Patterson AFB, OH<br />
This panel of government, academic and industrial leaders will review and discuss<br />
current activities and challenges in the growing area of adaptive structures including<br />
morphing structures. Adaptive structures can be defined as load bearing systems that<br />
reconfigure in response to the environment or mission need for enhanced performance.<br />
These structures are enabled by materials capable of changing their intrinsic<br />
mechanical, electrical, optical, and/or thermal properties upon triggering. Shapechanging<br />
vehicles such as those envisioned for morphing Unmanned Air Vehicles<br />
(UAV'S) and responsive automotive systems will be discussed with particular attention<br />
given to current progress in Shape Memory Polymers (SMP).<br />
Panelists:<br />
Brian Sanders, Adaptive Structures Team Leader, AFRL/VA<br />
Pat Mather, Professor of Chemical Engineering, Syracuse University<br />
Tao Xie, Staff Researcher, General Motors<br />
6:00 PM - 9:30 PM<br />
Riverboat Cruise<br />
Escape from the ordinary! Join SAMPE and cruise the Ohio River on the Belle of<br />
<strong>Cincinnati</strong>, while enjoying an evening of food, fun and Monte Carlo style<br />
gaming.<br />
• Buses will transport attendees to the Riverboat from 6:00 PM 6:40 PM.<br />
• The buses will load at the <strong>Cincinnati</strong> Hilton Netherland Plaza's 5 th Street<br />
entrance.<br />
• The boat will set sail at 7:00 PM and dock at 9:30 PM. Buses will return<br />
attendees to the hotel.<br />
• Tickets are included with a four day conference registration. Additional tickets<br />
may be purchased at the SAMPE registration area for $50.<br />
Panelists:<br />
Dr. James Murday, University of Southern California, Director of Development Washington<br />
DC Research Advancement Office<br />
Dr. Russell Maguire, The Boeing Co., Boeing Technical Fellow, Composites & Nanocomposites<br />
Dr. John Lettow, Vorbeck Materials Corp., President & Co-Founder<br />
Dr. Max Lake, Applied Sciences, Inc., President<br />
Dr. Tia Benson Tolle, AFRL, Chief Structural Materials Branch<br />
15—
Thursday, November 1<br />
Room: Capris 1&4<br />
Propulsion III: Textile Preforming–Session<br />
Session Chairs: Kory Abbitt, Hexcel, Yellow Springs, OH and Mike Braley, AFRL/<br />
MLMP, WPAFB, OH<br />
8:00 AM Automated Fiber Placement of Advanced Materials,<br />
B. Milenski, V.M. Benson, M.A. White, ATK Aerospace Structures, ITAR<br />
Clearfield, UT; F.E. Arnold, K. Thorpe, AFRL/MLBCO, Dayton, OH<br />
8:30 AM Fiber Preform Effect on Composite Microcrack, X. Fang, X. Chen,<br />
Z. Wang, S.K. Gifford, W.W. Lin, GE Global Research, Niskayuna, NY; D. Hanks,<br />
J.A. Woods, The Boeing Company, Seattle, WA<br />
9:00 AM Low Pressure Resin Transfer Molding for Cost Effective Aircraft<br />
Quality Structures, D.E. Davenport, R. Petrovich, G. Sutton, North Coast Composites,<br />
Cleveland, OH<br />
9:30 AM Real-Time Monitoring of Microcrack Growth in Polymer-Matrix<br />
Composites During Temperature-Humidity Cycling, J. Li, Y. Plotnikov, W.W.<br />
Lin, X. Fang, GE Global Research, Niksayuna, NY<br />
10:00 AM A New Empirical Method to Predict Microcracking in Composites<br />
Using a Dimensionless Number (MC), Y. Yoon, W.W. Lin, X. Fang, GE<br />
Global Research, Niskayuna, NY; J.A. Woods, The Boeing Company, Seattle, WA<br />
Room: Capris 2&3<br />
Electrical Properties and Nanocomposites I–Session<br />
Session Chair: Max Alexander, AFRL, WPAFB, OH<br />
8:00 AM Spray Methods for Improved Shielding Effectiveness<br />
of Conductive Nanofiber Composites, B.M. Black, M.D.<br />
ITAR<br />
Alexander, H.J. Dowty, AFRL/MLBP, Wright Patterson AFB, OH<br />
8:30 AM Varieties of Carbon Nanofiber Paper, D.W. Firsich, Inorganic<br />
Specialists Inc., Miamisburg, OH<br />
9:00 AM Conductive Nanocomposites: Focus on Lightening Strike Protection,<br />
T. Gibson, S. Putthanarat, University of Dayton Research Institute, Dayton,<br />
OH; J. Chase Fielding, A. Drain, K. Will, Air Force Research Laboratory,<br />
Wright Patterson AFB, OH; M. Stoffel, Southwestern Ohio Council for Higher<br />
Education, Dayton, OH<br />
9:30 AM Structural Materials for Resistance Heating, D.D.L. Chung, University<br />
at Buffalo, State University of New York, Buffalo, NY<br />
10:00 AM Materials Based on Cement, Polymer and Carbon for Electromagnetic<br />
Functions, D.D.L. Chung, University at Buffalo, State University of<br />
New York, Buffalo, NY<br />
10:30 AM Surface Resistance of Carbon Nanotube/Inorganic Binder/<br />
Silver, I.-S. Tsai, H.-K. Huang, Feng Chia University, Taichung, Taiwan<br />
11:00 AM Electric Breakdown of Carbon Black Reinforced Epoxy Nanocomposites,<br />
J. Gou, University of South Alabama, Mobile, AL; X. Ji, H. Li, Harbin<br />
Institute of Technology, Harbin, China<br />
Room: Salon D&E<br />
Morphing & Adaptive Materials I: Applications and Challenges–Session<br />
Session Chair: Pat Mather, Syracuse University, Syracuse, NY<br />
8:00 AM Thermal Properties of an Open Cell Shape Memory Polymer<br />
Foam, T. Sanderson, Raytheon Missile Systems, Tuscon, AZ and University of<br />
Arizona, AZ; J. Lamb, Raytheon Missile Systems, Tuscon, AZ; M.A. Di Prima, K.<br />
Gall, Georgia Institute of Technology, Atlanta, GA; S. Arzberger, Composite Technology<br />
Development, Lafayette, CO<br />
8:30 AM Characterization of Shear Deformation and Strain Recovery<br />
Behavior in Shape Memory Polymers, F. Khan, J.-H. Koo, D. Monk, E.<br />
Eisbrenner, Miami University, Oxford, OH<br />
9:00 AM Using Smart Materials to Actuate a Dynamic Orthotic Boot for<br />
Patients with Muscular Spasticity, C. Hamilton, M. Bailey-Van Kuren, E. Rivera,<br />
Miami University, Oxford, OH<br />
9:30 AM On the Development of Constitutive Models of Finite Deformation<br />
Behavior of Shape Memory Polymers, H.J. Qi, F. Castro, University of<br />
Colorado, Boulder, CO; J.M. Hermiller, D.E. Havens, Cornerstone Research Group<br />
Inc., Dayton, OH<br />
10:00 AM Active Multistable Structures for Morphing Applications, M.<br />
Schultz, Composite Technology Development, Inc., Lafayette, CO<br />
Room: Salon F&G<br />
Composite Repair–Session<br />
Session Chairs: Dan McCray, University of Dayton Research Institute, Dayton, OH<br />
and Jim Mazza, AFRL/MLSA, WPAFB, OH<br />
8:00 AM Tensile Strength of Scarf Jointed CFRP Laminates with Impact<br />
Damage, H. Hoshi, Y. Iwahori, K. Nakano, Japan Aerospace Exploration Agency,<br />
Mitaka, Tokyo, Japan<br />
8:30 AM Structural Repair Techniques for Highly-Loaded Carbon/BMI<br />
Composites, C.H. Wang, A.N. Rider, P. Chang, A. Charon, A. Baker, Defence<br />
Science and Technology Organisation, Melbourne, Australia<br />
9:00 AM Surface Treatment and Application Processes for Epoxy Bonding<br />
to Bismaleimide Composites, A.N. Rider, C.H. Wang, P. Chang, Defence<br />
Science and Technology Organisation, Melbourne, Victoria, Australia; N. Brack,<br />
La Trobe University, Melbourne, Australia<br />
9:30 AM Bonded Boron Patch Repair Evaluation, N.J. Jacobs, University of<br />
Dayton Research Institute, Dayton, OH<br />
10:00 AM Light-Curing Structural Tape for In-Space Repair, R.E. Allred,<br />
A.E. Hoyt Haight, T.F. Wesley, Adherent Technologies, Inc., Albuquerque, NM<br />
10:30 AM F-16 Aircraft 341 Bulkhead Repair, K. Storage, B. Bolan, J. Mazza,<br />
AFRL, Wright Patterson AFB, OH; P. Childers, University of Dayton Research Institute,<br />
Wright Patterson AFB, OH<br />
Room: Salon H&I<br />
Nanomaterials IV: Synthesis and Processing–Session<br />
Session Chairs: Enrique Barrera, Rice University, Houston, TX and Don Klosterman,<br />
University of Dayton, Dayton, OH<br />
8:00 AM Dispersion Behavior of the Layered-Silicate in Aerospace Epoxy<br />
and its Durability in Aerospace, C. Chen, University of Dayton Research<br />
Institute, Dayton, OH; T. Benson Tolle, J. Baur, AFRL/MLBC, Wright Patterson AFB,<br />
OH<br />
8:30 AM Shear Processing of Carbon Nanofibre Epoxide Composites:<br />
Modelling and Characterisation, F.W.J. van Hattum, C. Leer, O.S. Carneiro,<br />
Institute for Polymers and Composites, University of Minho, Guimaraes, Portugal<br />
9:00 AM Modifying Mechanical, Thermal, Electrical and Barrier Properties<br />
of Polymers and Composites with Nanoparticles, L.T. Drzal, H.<br />
Fukushima, Michigan State University, East Lansing, MI<br />
9:30 AM Effect of Dispersants and Size of Graphite Nanoplatelets on<br />
Their Composite Properties, I.-H. Do, T. Kamae, H. Fukushima, L.T. Drzal,<br />
Michigan State University, East Lansing, MI<br />
10:00 AM Synthesis and Characterization of Functional Flexible Carbon<br />
Nanofiber Nanosheets, J.A. Mapkar, M.R. Coleman, L.M. Berhan, U. Karakula,<br />
The University of Toledo, Toledo, OH<br />
10:30 AM Multifunctional Composites for Improved Polyimide Thermal<br />
Stability, S.G. Miller, NASA Glenn Research Center, Cleveland, OH<br />
11:00 AM Use of Electron Beam Irradation for Surface Functionalization<br />
of Carbon Nanofibers, M.C. Evora, Instituto for Advanced Studies, Sao Jose<br />
dos Campos-SP, Brazil and University of Dayton, Dayton, OH; D. Klosterman,<br />
University of Dayton, Dayton, OH<br />
—16
Thursday, November 1<br />
Luncheon<br />
11:30 AM - 1:00 PM<br />
Hall of Mirrors, <strong>Cincinnati</strong> Hilton Netherland Plaza, 3 rd floor<br />
The Science of Art Conservation<br />
Stephen Bonadies<br />
Chief Conservator, <strong>Cincinnati</strong> Art Museum<br />
<strong>Cincinnati</strong>, OH<br />
For generations, art conservation has largely been practiced as a craft. New technologies<br />
now available to study a work of art not only have increased our understanding<br />
of the materials that make up a work of art, but also of how these materials<br />
have aged over time and how a conservation treatment may potentially alter an<br />
object. A brief overview of the impact of technology on art conservation will be<br />
presented with an emphasis on scientific knowledge and tools utilized today.<br />
Stephen D. Bonadies, chief conservator at the <strong>Cincinnati</strong> Art Museum, received his<br />
initial conservation training at the Cooperstown Graduate <strong>Program</strong>. After receiving<br />
his M.A., he became a Mellon Fellow at the Philadelphia Museum of Art. In 1980<br />
Bonadies returned to the Art Conservation <strong>Program</strong> at Cooperstown to teach conservation<br />
science. In 1981 he was appointed to the staff of the <strong>Cincinnati</strong> Art Museum.<br />
Luncheon vouchers are included with a four day conference registrations. Additional<br />
vouchers may be purchased for $28 at the SAMPE registration counter. To receive<br />
admission to the luncheon, vouchers must be redeemed for tickets at the SAMPE<br />
registration counter by 5:00 PM Wednesday, October 31.<br />
Room: Capris 2&3<br />
Electrical Properties and Nanocomposites II–Session<br />
Session Chair: Jennifer Fielding, AFRL/MLBCO, WPAFB, OH<br />
1:00 PM Nano-Composite Materials for Lightning Strike Mitigation<br />
and EMI Shielding, R. Vaidyanathan, J. Blaine, M. Patterson,<br />
ITAR<br />
Advanced Ceramics Research, Inc., Tuscon, AZ; J. Campbell, Advanced Ceramics<br />
Manufacturing LLC, Tucson, AZ; E.V. Barrera, D. Chakravarthi, Q. Zeng, Rice<br />
University, Houston, TX; M.L. Shofner, S. Kumar, Georgia Institue of Technology,<br />
Atlanta, GA<br />
1:30 PM Electrical and Mechanical Properties of Space Durable<br />
Polyisocyanate Resin/M55 Carbon Fiber/Nickel Nanostrand Composite,<br />
G. Hansen, N. Hansen, Metal Matrix, Midway, UT; D.O. Adams, University of<br />
Utah, Salt Lake City, UT<br />
2:00 PM Characterization of Polymer Nanocomposites from MISSE-5, H.J.<br />
Dowty, M.D. Alexander, B.M. Black, AFRL/MLBP, Wright Patterson, OH<br />
2:30 PM Enhancement of Electrical Conductivity of Continuous Fiber<br />
Composite Tapes Using Vapor Grown Nanofiber, M.K. Alam, J. Morosko,<br />
D. Shin, Ohio University, Athens, OH<br />
3:00 PM Effect of Nanotube Functionalization on Electrical Properties of<br />
SWNT Buckypaper Materials, Y. Xue, J. Bao, Q. Wu, B. Wang, Z. Liang, Y.-B.<br />
Park, B. Wang, C. Zhang, Florida State University, Tallahassee, FL<br />
Congratulations to the Outstanding Papers Award Winners<br />
1 st Place Outstanding Paper<br />
Polymer and Aligned Carbon Nanotube Nanocomposites<br />
and Nanodevices<br />
Liangti Qu, Wei Chen and Liming Dai, Department of Chemical<br />
and Materials Engineering, School of Engineering and UDRI,<br />
University of Dayton, Dayton, OH; Ajit Roy and Tia Benson Tolle,<br />
Air Force Research Laboratory, Materials and Manufacturing Directorate,<br />
MLBC, Wright Patterson AFB, OH<br />
2 nd Place Outstanding Paper<br />
PAN/CNT: A Precursor for Next Generation Carbon Fiber<br />
Han Gi Chae, Satish Kumar, Georgia Institute of Technology,<br />
Atlanta, GA<br />
3 rd Place Outstanding Paper<br />
RTM of High Temperature Polymers for Engine Valves<br />
Richard T. Buckley, Donald W. Radford, Motorsport Engineering<br />
Research Center, Colorado State University, Fort Collins, CO<br />
17—
Thursday, November 1<br />
Room: Salon D&E<br />
Morphing & Adaptive Materials II: Novel Resins and Reinforcements–<br />
Session<br />
Session Chair: Doug Campbell, Composite Technology Development, Inc., Lafayette,<br />
CO<br />
1:00 PM Thermo-Mechanical Behavior of Adaptive Polymer Foam, M.<br />
Di Prima, M. Lesniewski, K. Gall, D.L. McDowell, Georgia Institute of Technology,<br />
Atlanta, GA; T. Sanderson, Raytheon Missile Systems, Tucson, AZ; D. Campbell,<br />
Composite Technology Development, Lafayette, CO<br />
1:30 PM Granular Reinforced Materials for Morphing Structures, D.M.<br />
Phillips, G.S. Jacobson, J. Baur, Materials Manufacturing Directorate, Wright<br />
Patterson ABF, OH; F.J. Khan, Miami University, Oxford, OH<br />
2:00 PM Light Activated Shape Memory Polymer Characterization Challenges<br />
and Strategies, R. Beblo, L. Mauck Weiland, University of Pittsburgh,<br />
Pittsburgh, PA; E. Snyder, T. Tong, R. Schueler, E. Havens, Cornerstone Research<br />
Group, Inc., Dayton, OH<br />
2:30 PM Shape Memory Polymer Nanocomposites, G. Karst, T. Tong, J.<br />
Jones, T. Havens, Cornerstone Research Group, Inc., Dayton, OH<br />
Room: Salon F&G<br />
High Performance Fibers–Session<br />
Session Chair: Karla Strong, AFRL/MLBCO, WPAFB, OH<br />
1:00 PM Developments in Nanotube-Reinforced Carbon Fiber,<br />
M.C. Weisenberger, M.S. Meier, R.J. Andrews, University of Kentucky, ITAR<br />
Lexington, KY<br />
1:30 PM Morphological Characterization of Some Commercial Carbon<br />
Fibers, D.P. Anderson, S. Putthanarat, University of Dayton Research Institute,<br />
Dayton, OH<br />
2:00 PM Pitch Based Carbon Fiber Processing and Composites, A. Vakili,<br />
Z. Yue, Y. Fei, H. Cochran, L. Allen and M. Duran, University of Tennessee Space<br />
Institute, Tullahoma, TN<br />
2:30 PM Mechanical Performance of Multi-Wall Carbon Nanotube Twisted<br />
Yarns, G.D. Jefferson, T.S. Gates, S.K. Kahng, NASA Langley Research Center,<br />
Hampton, VA<br />
3:00 PM PAN/CNT: A Precursor for Next Generation Carbon Fiber, S.<br />
Kumar, H.G. Chae, Georgia Institute of Technology, Atlanta, GA<br />
3:30 PM Cryogenic Temperature Effects on the Mechanical Properties of<br />
Carbon and Synthetic Fibers, C. Hastings, J. Schneider, M. Dyess, Mississippi<br />
State University, Mississippi State, MS<br />
4:00 PM Strength and Corrosion Resistance Properties of a New Generation<br />
of High Performance R-Glass Reinforcements © , K. Spoo, Y. Peng,<br />
D. Hartman, Owens Corning S&T, Granville, OH<br />
1:00 PM<br />
Room: Salon H&I Oral Presentations Only<br />
Design as a Fundamental Process for Transdisciplinarity "Art to Science":<br />
Educating Engineers-Panel<br />
Moderators: Dr. James Seferis, GloCal Network Corporation, Seattle, WA and Dr.<br />
Carol Handwerker, Purdue University, West Lafayette, IN<br />
This panel will explore the innovation of design and art in multiple disciplines and<br />
how cutting across disciplines, or Transdisciplinarity, is so crucial to the innovation<br />
and success of tomorrow's engineers. International and renowned leaders in various<br />
fields will be brought together to present design and art and how it has been utilized<br />
in various engineering and industrial fields. Speakers will range from experts in<br />
architecture to restoration to aircraft design.<br />
Panelists:<br />
Robert Swain, "Materials and Sustainable Design"<br />
Dr. M. Fytos, "Restoration of the Acropolis "<br />
Ari Vihersaari, "Design Development and in Service Performance of a Composite<br />
Aircraft Fin"<br />
Scott Vander Zande, "Design of a Traveling Exhibit on Aviation Through a Team<br />
Learning Process"<br />
Lloyed MacPherson, "Thermal Analysis from Art to Science and Engineering"<br />
Dr. Jim Seferis, "Interior and Exterior of Commercial Aircraft "<br />
Room: Capris 1&4<br />
Propulsion IV: Impact and Dynamic Behavior in Propulsion–Session<br />
Session Chairs: Ming Xie, GE Aviation, <strong>Cincinnati</strong>, OH and Dale Hopkins, NASA<br />
Glenn Research Center, Cleveland, OH<br />
1:00 PM Analytical Predictions of Failure of a Bolted Joint in Composite<br />
Panel Due to Direct Impact, J. Gagel, M. Xie, GE Aviation, <strong>Cincinnati</strong>, OH; A.<br />
Vijayvargiya, V. Reddy, GE Infrastructure-Aviation, Bangalore, IN<br />
1:30 PM A Heterogeneous Constitutive Model for Reinforced Carbon-<br />
Carbon, K.S. Carney, R.K. Goldberg, NASA Glenn Research Center, Cleveland,<br />
OH; R.S. Lee, S. Santhanam, Villanova University, Villanova, PA<br />
2:00 PM Soft-Body Impact on Jet Engine Components made up of Composites,<br />
S.K. Sinha, GE Aviation, <strong>Cincinnati</strong>, OH; N. Jain, GE India Technology<br />
Center, Bangalore, India<br />
2:30 PM Full Field Strain Measurement in Tensile and Compressive Split<br />
Hopkinson Bar Experiments, A. Gilat, A. Walker, Ohio State University, Columbus,<br />
OH; T. Schmidt, J. Tyson, Trilion Quality Systems, West Conshohocken, PA<br />
3:00 PM Damage Prediction of Carbon/Epoxy Composite Panels Subjected<br />
to Ballistic Impact, Z. Wang, G. Qian, GE Global Research, Niskayuna,<br />
NY; M. Xie, GE Infrastructure-Aviation, <strong>Cincinnati</strong>, OH<br />
3:30 PM Enabling Technologies for the Health Management of Composite<br />
Structures, G.P. Tandon, J.H. Kang, R.Y. Kim, University of Dayton Research<br />
Institute, Dayton, OH; B.P. Rice, N.A. Gagliardi, University of Dayton,<br />
Dayton, OH; D. Muench, A. Liberson, B. Walsh, M. Roemer, Impact Technologies,<br />
LLC, Rochester, NY<br />
4:00 PM The Determination and Comparison of Energy Propagating<br />
Behaviour of Woven and Uni-Directional Para-Aramid Fabrics by 2-D<br />
Thin Plate Spline Method, M. Karahan, F. Gulsoy, N. Karahan, University of<br />
Uludag, Bursa, Turkey<br />
—18
Call for Papers<br />
Memphis ’08<br />
SAMPE Fall Technical Conference • September 8-11, 2008<br />
Memphis Marriott Downtown and Cook Convention Center,<br />
Memphis, TN<br />
Co-located with the American Society for Composites Annual Technical Conference<br />
Sponsored by SAMPE’s Michigan Chapter<br />
“Multifunctional Materials: Working Smarter Together”<br />
We are seeking high quality technical papers that focus on advanced materials and processes, research,<br />
development, applications and engineering. Paper topics will include, but not be limited to:<br />
Adhesives and Adhesive Bonding<br />
Aerospace Structures and Applications*<br />
Biomedical Applications<br />
Carbon-Carbon Composites and Foams*<br />
Ceramics and Ceramic Composites<br />
Commercial/Military Aircraft*<br />
Composites Affordability<br />
Composite Design and Analysis<br />
Composite Fatigue and Fracture<br />
Composites Repair Technology<br />
Electronic Materials<br />
Environmental Considerations<br />
Fiber Developments<br />
Fire Safety/Materials Technology<br />
Ground Vehicle Applications<br />
High Temperature Resins/Composites*<br />
Infrastructure Applications<br />
Joints in Composite Structures<br />
Lightweight Metals Technology<br />
Manufacturing and Processing Advances<br />
Marine Applications<br />
Metal Matrix Composites<br />
Multifunctional Materials**<br />
Nanostructures and Nanocomposites<br />
Natural Fibers, Resins and Composites<br />
New Global Markets<br />
Nondestructive Evaluation/Inspection<br />
Offshore Applications<br />
RTM/VARTM/SCRIMP<br />
Sandwich Structures<br />
Space Structures<br />
Sports and Recreation Applications<br />
Standardization of Materials and Testing<br />
Structural Health Monitoring<br />
Thermoplastics and Thermoplastic<br />
Composites<br />
* Possible Restricted Sessions<br />
** Conference Theme<br />
A 100-200 word abstract should give the objective, results and significance<br />
of the study to allow assessment of the proposed technical paper.<br />
Abstracts are due January 7, 2008.<br />
Visit www.sampe.org to submit an abstract today.<br />
Abstract Submission Questions:<br />
Michelle Loggia, SAMPE<br />
+ 1 626.331.0616 ext. 603<br />
michelle @sampe.org<br />
Technical <strong>Program</strong> Questions:<br />
Dr. Nicholas Gianaris, General Dynamics Land Systems,<br />
e-mail: gianaris@gdls.com<br />
Dr. Ronald Gibson, Wayne State University,<br />
e-mail: gibson@eng.wayne.edu<br />
Michael T. Wilson, College Park Industries,<br />
e-mail: MWilson@college-park.com<br />
Exhibitors: Book your space today!<br />
See Karen Chapman in the SAMPE Sales Office–Rosewood Room Booth #111<br />
19—
SAMPE ’07 Exhibitors Products and Services<br />
3M Aerospace 144<br />
3M Center; Bldg 223-IN-14, St. Paul, MN 55144-1000<br />
www.3M.com/aerospace<br />
3M is a leading supplier to the global aerospace industry, providing<br />
innovative products and solutions to OEMs and MROs in the commercial,<br />
business, general, and military aviation industries. 3M has<br />
more than 30 major technology and product platforms, as well as<br />
technical support, sales and distribution networks that can help industry<br />
leaders stay competitive. 3M products include adhesives and tapes;<br />
abrasives; electronic materials and equipment; supply-chain software<br />
and services; primers and coatings; protective, decorative and reflective<br />
films and thousands of other ways to make aerospace operations<br />
more effective, profitable, safe and efficient.<br />
A&P Technology 128<br />
4595 East Tech Drive, <strong>Cincinnati</strong>, OH 45245<br />
www.braider.com<br />
A&P Technology is the world's leading manufacturer of braided reinforcements.<br />
The ability to design<br />
its braiding machinery in-house<br />
allows A&P to remain at the forefront<br />
of braiding technology.<br />
A&P offers the distinct advantage<br />
of customized products with a quick turnaround at the lowest<br />
possible costs. A&P's production braids are used in a variety of applications<br />
ranging from automobile side impact airbags to jet engine<br />
stator vanes to hockey sticks to prosthetics. Current programs involve<br />
the use of braid in structures of unprecedented scale, such as jet engine<br />
fan cases, rocket nozzles and commercial transport airframes.<br />
A. P. C. M. Manufacturing LLC 119<br />
1366 Norwich Road, Plainfield, NJ 06374<br />
www.prepregs.com<br />
A.P.C.M. is a manufacturer of structural toughened thermo-set Epoxy<br />
Prepregs with cure temperatures ranging from 190°F to 400°F. These<br />
systems are available on most commercially available reinforcement<br />
fabrics and fibers. Custom prepregging and Toll coating services as<br />
well as "Towpregs" are available for filament winding, braiding and<br />
weaving. Lightning Strike prepreg are available for composite aircraft.<br />
Advanced Composites Group, The 148<br />
5350 S. 129th E. Avenue, Tulsa, OK 74134<br />
www.advanced-composites.com<br />
The Advanced Composites Group (ACG) provides a unique combination<br />
of products and services globally. ACG specializes in the manufacture<br />
of high-performance composite prepregs and materials, into a<br />
diverse range of applications and markets.<br />
AFRL/ML 120<br />
2079 Tenth Street, Bldg 255, Area A, Wright Patterson AFB,<br />
OH 45433<br />
www.ml.afrl.af.mil<br />
Materials and Manufacturing Directorate, headquartered at Wright<br />
Patterson Air Force Base, with an additional research facility at Tyndall<br />
AFB, Fla., develops materials, processes and advanced manufacturing<br />
technologies for aircraft, spacecraft, missiles, rockets and groundbased<br />
systems and their structural, electronic and optical components.<br />
Their research includes revolutionary nano-scale and biotechnologies,<br />
as well as non-structural materials such as coatings, fluids and greases.<br />
Air Force product centers, logistics centers and operating commands<br />
rely on the directorate's expertise in metallic and nonmetallic structural<br />
materials, nondestructive inspection; materials used in aerospace propulsion<br />
systems, sensor materials, laser-hardened materials, systems<br />
support and advanced manufacturing methods to solve system, expeditionary<br />
deployment, and operational challenges.<br />
—20<br />
Airtech International 127/T27<br />
5700 Skylab Road, Huntington Beach, CA 92647<br />
www.airtechonline.com<br />
Airtech Advanced Materials Group manufactures vacuum bagging<br />
and composite tooling materials for resin infusion, hand lay-up, and<br />
oven/autoclave cures up to 750°F. Our product line includes vacuum<br />
bags made any size and shape, release films, peel plies, breathers,<br />
sealant tapes and much more. Our resin infusion tooling systems produce<br />
autoclaves quality at room temperature cures. Technical service<br />
worldwide.<br />
Alcan Baltek Corporation<br />
T24<br />
108 Fairway Court, Northvale, NJ 07647<br />
www.alcanbaltek.com<br />
Alcan Baltek a division of Alcan Products Corporation and a member<br />
of the Alcan Composites Group, is a worldwide supplier of structural<br />
core materials for today's most advanced composites. We offer an<br />
extensive array of products including BALTEK® balsa core, AIREX®<br />
PVC, PET and now, new fiber reinforced PU foam cores and LANTOR®<br />
non-woven mats.<br />
American Autoclave Company<br />
T31<br />
Jasper, GA<br />
www.americanautoclave.com<br />
American Autoclave Company manufactures new and remanufactures<br />
used autoclaves to customer process requirements ranging from R&D<br />
to full scale production units 12 inches to 20+ feet in diameter. Our<br />
services include: inspection, relocation and renovation of existing autoclaves,<br />
on site service, replacement parts, repair, maintenance, and<br />
upgrades, including control system updates, and conversions, in addition,<br />
new and used ovens, presses, cooling systems, similar and<br />
custom requirements.<br />
Applied Aerospace Structures Corp.<br />
T21<br />
3437 S. Airport Way, P.O. Box 6189, Stockton, CA 95206<br />
www.aascworld.com<br />
AASC fabricates on a build-to-print or design to specification complex<br />
composite and metal bonded structures and assemblies for both military<br />
and commercial applications. AASC is classified as a small business.<br />
The company is ISO 9001:2000 and AS9100, third party certified<br />
and has been in business since 1956.<br />
Applied Sciences, Inc. (ASI) 118<br />
141 West Xenia Avenue, Cedarville, OH 45314<br />
www.apsci.com<br />
Applied Sciences, Inc. (ASI) develops innovative carbon materials and<br />
their applications for various commercial and military customers. ASI's<br />
manufacturing affiliate, Pyrograf Products, Inc. (PPI), is one of the<br />
world's leading producers of highquality,<br />
affordable, multi-functional<br />
carbon nanofibers. Products include<br />
Pyrograf-III-a vapor-grown<br />
carbon nanofiber which can be added to composite materials to enhance<br />
the host materials' strength, stiffness, and electrical conductivity.<br />
Current production capacity is 70,000 lbs/year; and expansion plans<br />
are under development.
SAMPE ’07 Exhibitors Products and Services<br />
Assembly Guidance 136/137<br />
27 Industrial Avenue, Chelmsford, MA 01824<br />
www.assemblyguide.com<br />
Multitasking 3D laser projectors accurately display CAD data for manual<br />
tasks directly onto 3D surface. Options:<br />
compact size, wireless, targetless, PDA<br />
remotes. LASERGUIDE eliminates templates<br />
and provides non-contaminating<br />
dimensional information for faster and better assemblies. Automatic<br />
Ply Verification (APV) verifies and documents that every ply is build<br />
correctly every time.<br />
Automated Dynamics<br />
T15<br />
407 Front Street, Schenectady, NY 12305<br />
www.automateddynamics.com<br />
Automated Dynamics is a fabricator of engineered composite structures<br />
and manufacturer of automated fiber placement and tape laying<br />
equipment. Our design and engineering staff is ready to assist you with<br />
proven prototyping, qualification, initial and full production capabilities.<br />
We specialize in thermoplastic composite parts for aerospace/<br />
defense and commercial markets. We design and build fiber placement<br />
and tape laying equipment for both thermoset and thermoplastic<br />
composites and have a full service, installation/integration and training<br />
resources.<br />
AvPro, Inc.<br />
T1<br />
P.O. Box 1696, Norman, OK 73070<br />
www.avproinc.com<br />
AvPro provides software tools control systems and testing services for<br />
characterizing and managing the processing of composites and other<br />
materials. Products include the PACE2000 testing systems to monitor<br />
and manage viscoelastic changes during cure and the CSS300 suite<br />
for legacy control. Software tools are available to simulate and evaluate<br />
new processing methods. The mission of the company is to enable<br />
the use of processing science in the production of composite structures.<br />
Bondtech Corporation 129<br />
2400 Hwy 27, Somerset, KY 42503<br />
www.bondtech.net<br />
We are an approved source for Boeing, Raytheon, Hitco, etc. and<br />
have been an established business for 30 years. Marketing reusable<br />
Vacuum Bagging Systems (RVBS*) for autoclave/oven cures up to 400°<br />
F. We have working models of different types of our inflatables, RVB<br />
System and Tube Claves, please contact us or send us a tooling sketch<br />
with conditions of your cure cycle and we will propose the best cost<br />
saving RVB System for your project.<br />
Camie-Campbell Inc.<br />
T23<br />
9225 Watson Industrial Park, St. Louis, MO 63126<br />
www.camie.com<br />
Camie-Campbell Inc. is a manufacturer of quality aerosol and bulk<br />
adhesives used in the infusion and vacuum bagging process We also<br />
have a full line of aerosol and bulk mold releases, cleaner degreasers,<br />
and lubricants.<br />
<strong>Cincinnati</strong> Testing Laboratories<br />
1775 Carillon Blvd., <strong>Cincinnati</strong>, OH 45240<br />
www.cintestlabs.com<br />
Specializing in machining, conditioning and mechanical<br />
testing of advanced composite, polymeric, matrix<br />
composites, metals, metal matrix composites, ceramic<br />
matrix composites, plastics and other advanced composite<br />
materials. We maintain high standards which<br />
have earned us the reputation of being a state of the art<br />
T26<br />
facility to both industry and governmental agencies. We are currently<br />
in the process of constructing a new building and we are very excited<br />
anticipating our move to a bigger and better facility in which we will<br />
have more capabilities and efficiencies to service our customers needs<br />
even better.<br />
Coast-Line International<br />
T9<br />
274 Bangor Street, Lindenhurst, NY 11570<br />
www.coast-lineintl.com<br />
Coast-Line International has supplied the aerospace and composite<br />
industries since 1960. Coast-Line works very closely with our manufacturers<br />
to provide technical help and the best service possible. Coast-<br />
Line stocks Airtech vacuum bagging products, Airtech tooling materials,<br />
Hexcel technical fabrics, 3M products, AC Tech aerospace sealants,<br />
Mask-Off protective products, Zip-Chem corrosion inhibitors,<br />
lubricants adhesives, and cleaners, WichiTech hot bonders, pressure<br />
sensitive tapes from Intertape, Permacel, Tesa, 3M, and Norton abrasives.<br />
With stocking locations in New York, Atlanta GA, and Berlin<br />
MA. Coast-Line can quickly ship product for just in time applications.<br />
Composites One<br />
T20<br />
85 W. Algonquin Road, Suite 600, Arlington Heights, IL 60005<br />
www.compositesone.com<br />
Today's emerging markets are opening the door to new opportunities<br />
for composite manufacturers. Composites One can offer you the products<br />
and services needed to take advantage of these new opportunities.<br />
We're the one place for all your composite needs for markets such<br />
as wind energy, ballistics, marine, closed mold, infrastructure, aerospace,<br />
and cured-in-place-pipe.<br />
Composites World<br />
T5<br />
4891 Independence Street, Ste 270, Wheat Ridge, CO 80033<br />
www.compositesworld.com<br />
Cornerstone Research Group 138<br />
2750 Indian Ripple Road, Dayton, OH 45440<br />
www.crgrp.net<br />
Founded in April 1997, cornerstone Research Group, Inc. (CRG) is<br />
dedicated to providing high-quality research and development services<br />
that lead to breakthrough technologies. The company combines<br />
creative science and engineering to discover, develop, and deliver<br />
revolutionary materials-based solutions. Focusing on the design and<br />
application of state-of-the-art materials for commercial and military<br />
markets, CRG's mission is to understand customer's challenges and<br />
dreams and match them with emerging technologies.<br />
Cytec Engineered Materials 147<br />
2085 E. Technology Circle, Tempe, AZ 85284<br />
www.cytecengineeredmaterials.com<br />
Cytec Engineered Materials manufactures technologically-advanced<br />
materials and material solutions for aerospace, HP-automotive, launch<br />
and other extreme-demand applications.<br />
The company employs nearly<br />
1,600 at 10 plants, four technology<br />
centers and sales offices throughout<br />
N. America, Europe and Asia. 2006<br />
sales were $602 million. Global headquarters: Tempe, Ariz. European<br />
headquarters: Wrexham, UK.<br />
21—
SAMPE ’07 Exhibitors Products and Services<br />
Delsen Testing Laboratories<br />
T10<br />
1024 Grand Central Avenue, Glendale, CA 91201<br />
www.delsen.com<br />
An independent testing laboratory with services including mechanical,<br />
electrical, and flammability properties testing, polymer analyses, metallography,<br />
and environmental exposures. Specialties include testing<br />
advanced composites, fatigue, fracture toughness, impact, OSU heat<br />
release rate, smoke density and toxicity testing and evaluation of printed<br />
wiring products.<br />
Dexmet<br />
T28<br />
7 Great Hill Road, Naugatuck, CT 06770<br />
www.dexmet.com<br />
DEXMET provides expanded material for Lightning Strike, and RFI,<br />
EMI protection as well as other aircraft, and composite applications.<br />
Our experienced engineering team, and our ISO certified facilities design<br />
and manufacture material to meet your specification, and deliver<br />
it rapidly, on time. Using both in house as well as partnership resources,<br />
DEXMET has developed, and continues to develop new coatings<br />
to meet the industry's requirements. We are your engineering resource<br />
for Lightning Strike and RFI, EMI materials, from our thin, flattened<br />
mesh to materials in widths up to 60" wide.<br />
DIAB 139<br />
315 Seahawk Drive, DeSoto, TX 75115<br />
www.diabgroup.com<br />
DIAB is the world leader in structural core materials and sandwich<br />
composite technology; DIAB supplies materials and solutions that make<br />
products light, strong, and competitive. DIAB's advanced polymer foam<br />
Divinycell, end-grain ProBalsa, core bedding adhesive, and panels<br />
are designed for demanding applications and provide design freedom,<br />
optimized weight, superior strength, excellent fatigue life, stiffness,<br />
and toughness. DIAB also provides advanced testing, design,<br />
and engineering services.<br />
EDO Corp. 132<br />
New York, NY<br />
www.edocorp.com<br />
EDO provides a full design, analysis, prototyping, and production<br />
fabrication of advanced composite structural<br />
systems. EDO products include primary<br />
aerospace structures, missile fuselages,<br />
holding tanks, pressure vessels,<br />
and launch tubes. Composite capabilities<br />
include braiding, filament winding, hand layup pre-preg, resin<br />
transfer molding (RTM), vacuum assisted RTM (VaRTM).<br />
Euro-Composites Corp.<br />
T17<br />
13213 Airpark Drive, Elkwood, VA 22718<br />
www.euro-composites.com<br />
Euro-Composites Corporation is a leading global manufacturer of lightweight<br />
products for aerospace, transportation, marine and industrial<br />
applications. Products utilize the extraordinary strength to weight ratio<br />
of Nomex, Kevlar and aluminum honeycomb core. Capabilities include<br />
core manufacture, sandwich panel production, thermal forming,<br />
splicing, bonding and 5 axis CNC machining.<br />
Fabric Development<br />
T19<br />
1217 Mill Street, Quakertown, PA 18951<br />
www.fabricdevelopment.com<br />
Fabric Development, Inc. offers the unique combination of design and<br />
development combined with production capabilities. We can supply<br />
all forms of textile structures including woven, knitted and braided<br />
fabrics. Reinforcements can be produced from all fiber types including<br />
—22<br />
carbons: standard and ultrahigh modulus, Kevlar, Fiberglass, Spectra,<br />
Nicalon, Tyranno, Quartz, and Ceramics. In addition, textile preforms<br />
are also produced to near net shapes for RTM and VARTM applications.<br />
Fabric Development's Quality System is registered to AS9100B<br />
and ISO9001:2000.<br />
Flow International Corporation 133<br />
23500 64th Avenue South, Kent, WA 98032<br />
www.flowcorp.com<br />
Combining Flow's invention and world leading ultra-high pressure<br />
abrasive waterjet (AWJ) technology with high-speed routing and drilling<br />
capabilities, Flow is the only company in the world offering a total<br />
composite machining center solution from a single source. And now,<br />
with the industry's only 87,000psi pumps, Flow Waterjets operate even<br />
faster and less expensively than other systems. Realize the many cost<br />
and quality benefits of AWJ: No mechanical stresses, delaminations,<br />
heat, fiber pull-out, airborne dust, secondary finishing, etc.<br />
General Plastics Mfg. Co. 143<br />
9910 Burlington Way, Tacoma, WA 98409<br />
www.generalplastics.com<br />
AS9100/ISO9000 certified manufacturer and molder of LAST-A-FOAM®<br />
rigid and flexible high-density polyurethane foams and tooling materials.<br />
We serve applications in composite core, nuclear transportation,<br />
composite tooling, thermoforming, marine applications, and models<br />
and prototype industries. We are specialists in fulfilling high-performance<br />
requirements. We have broad manufacturing capability, and<br />
have products qualified to most major airframe and defense requirements.<br />
Put us to work for you--we thrive on challenges.<br />
GrafTech International Ltd.<br />
T8<br />
12900 Snow Road, Parma, OH 44130<br />
www.graftech.com<br />
GrafTech International Ltd. is one of the world's largest manufacturers<br />
of high quality graphite and carbon based products. GrafTech manufactures<br />
graphite electrodes, carbon refractory systems, thermal management<br />
products, fuel cell and other specialty graphite and carbon<br />
products for the steel, electronics, power generation, semiconductor,<br />
transportation, petrochemical, and other metals markets.<br />
Greater Wichita Economic Development Coalition 115<br />
350 W. Douglas, Wichita, KS 67202<br />
www.gwedc.org<br />
The GWEDC is the lead economic development organization for<br />
Wichita and South Central Kansas. The Wichita area is home to Airbus,<br />
Boeing, Bombardier Learjet, Cessna, Raytheon and Spirit<br />
Aerosystems. With 250 suppliers in the area, Wichita is the premier<br />
aviation manufacturing cluster in the world. It is also home to the<br />
National Institute for Aviation Research, one of the country's leading<br />
institutions for composite and advanced material research.<br />
GSG, Inc.<br />
T33<br />
8443 Strato Drive, Sandy, UT 84093<br />
www.theGREENsalesguy.com<br />
GSG is a manufacturer's representative company with over 20 years<br />
selling experience in composites, specializing in sales and support of<br />
filament winding machines and other composite process equipment.<br />
GSG represents the following companies: Bolenz & Schaefer (BSD),<br />
Brenner International, Eastman Machine Company, Lynco Grinding,<br />
Material S.A, and MJC Engineering & Technology.
SAMPE ’07 Exhibitors Products and Services<br />
Heatcon Composite Systems<br />
T36<br />
600 Andover Park East, Seattle, WA 98188<br />
www.heatcon.com<br />
HEATCON® Composite Systems is the world leading manufacturer<br />
and supplier of aerospace composite repair training, equipment, accessories,<br />
and materials. We supply heat blankets, composite repair<br />
equipment, and materials, in large and small quantities for immediate<br />
delivery.<br />
Helicomb International 134<br />
1402 E. 69th East Avenue, Tulsa, OK 74112<br />
www.helicomb.com<br />
Helicomb International is a manufacturer of composite & metal bonded<br />
assemblies to the aerospace industry. Our core competencies include<br />
rapid prototype development, fabrication and assembly of composite<br />
bonded structures, metal bonded structures, and metal processing for<br />
aluminum, stainless steel, and titanium components. We hold special<br />
process certifications for Boeing (C-17), Northrop Grumman (F-5 and<br />
F-14) and Lockheed Martin (JSF and F-22). Helicomb International<br />
Inc. has a Boeing Silver Supplier Performance rating with 99.8% quality<br />
and 100% on time delivery and was awarded the Boeing 2004<br />
Small Business Supplier of the year. Recently, our manufacturing division<br />
was one of the first Boeing suppliers to be approved for Digital<br />
Product Definition (DPD) and currently manufacture several assemblies<br />
to Boeing's Model Based Definition (MBD) process.<br />
Henkel Corporation Aerospace 146<br />
2850 Willow Pass Road, Bay Point, CA 94565<br />
www.henkelna.com/aerospace<br />
Henkel provides structural adhesives and metal surfacing treatments<br />
for aerospace assembly and MRO. Key brands include Hysol® structural<br />
adhesives, Turco® metal surface treatments, Frekote® mold releases<br />
and Alodine® conversion coatings. Henkel provides a full line<br />
of material solutions for composite assembly, metal/honeycomb assembly,<br />
high temperature assembly and metal surface treatments.<br />
Hitco Carbon Composites, Inc. 135<br />
1600 W. 135th Street, Gardena, CA 90249<br />
www.hitco.com<br />
HITCO Carbon Composites, Inc. manufactures advanced composite<br />
materials for aerospace and industrial applications. Its products range<br />
from solid rocket motor nozzle assemblies, aircraft assemblies, naval<br />
composite structures, wet and dry friction applications such as aircraft<br />
and automotive torque control assemblies and transmissions and materials<br />
for industrial insulation for the aluminum and steel industries,<br />
among others. HITCO also manufactures and markets REFRASIL<br />
silica materials for thermal protection. Founded in 1922, HITCO continues<br />
to be an innovative leader in the advancement of carbon composite<br />
technologies.<br />
Huntsman Advanced Materials 123<br />
10003 Woodloch Forest Drive, The Woodlands, TX 77381<br />
www.huntsman.com/advanced_materials<br />
Huntsman Advanced Materials is a global leader and innovator in the<br />
development of high-performance composite resins, stereolithography<br />
and tooling materials, syntactics, adhesives,<br />
encapsulants and laminating<br />
systems used for design, prototyping,<br />
part fabrication, modification and repair.<br />
Our materials are backed by technical support, provided by experienced<br />
specialists located throughout the world.<br />
Inspec Foams, Inc. - ROHACELL 122<br />
1486 E. Calla Lily Way, Sandy, UT 84092<br />
www.rohacell.com<br />
Degussa AG, Röhm GmbH, Inspec Foams, Inc. maintains the world<br />
leadership position as manufacturer/seller of the widest range of structural<br />
sandwich panel foam core, marketed under the trade name<br />
ROHACELL®. Ten different Grades in various densities are available<br />
to suit commonly used composite manufacturing processes, i.e. VARTM,<br />
VARI, SLI, RFI, RTM and hand lay-up/autoclaving. Our ROHACELL®<br />
foam cores meet the demanding sandwich structural requirements in<br />
markets such as: aerospace, medical, automotive, wind energy, mass<br />
transportation, marine and others. Applications ranging from wind<br />
turbine blades to large satellite launch vehicle fairing/components.<br />
Integran Technologies Inc. 126<br />
1 Meridian Road, Toronto, ONT M9W4Z6<br />
www.integran.com<br />
Integran Technologies is a world leader in advanced metallurgical nanotechnology,<br />
providing its customers with an edge on their competition<br />
through proprietary advanced materials and coatings. Recent innovations<br />
include NanoPlate, a hard chrome plating alternative and<br />
Nanovar, a low thermal expansion coating which renders prototype<br />
CFRP aerospace tools suitable for high volume production. Integran's<br />
revolutionary nanometal-composite hybrids are making composite parts<br />
more durable and wear resistant allowing for new product developments<br />
in aerospace, sporting goods and motorsports applications.<br />
JPS Composite Materials<br />
T29<br />
101 Slater Road, Slater, SC 29683<br />
www.jpscompositematerials.com<br />
Manufacturer/weaver of fiberglass (E-glass, S-2® glass and<br />
Astroquartz®) composite reinforcement fabrics for commercial and military<br />
applications (i.e., radome antennas, printed circuit boards, laminate<br />
panels). Primary markets include electronics, aerospace, filtration,<br />
insulation, and construction.<br />
LAP Laser, LLC 110<br />
7669 Wooster Pike, <strong>Cincinnati</strong>, OH 45227<br />
www.lap-laser.com<br />
The CAD-Pro 3D provides immediate projection of composite ply outlines<br />
and/or parts positioning from any CAD drawing. Our new UF<br />
controller provides the highest projection speed and accuracy available.<br />
The CAD-Pro can be used to structure workflow with our simple,<br />
easy-to-use Pro-Soft 3D software. Get the highest performance in the<br />
smallest package.<br />
Lucas Industries<br />
T30<br />
10 Precision Drive, North Springfield, VT 05150<br />
www.lucasindustries.com<br />
Lucas Industries is an ISO 9001/2000 certified company, specializing<br />
in the design and fabrication of composite and metal tools, models,<br />
patterns, molds and prototype parts. We work with our customers from<br />
concept to finish product. Our engineers have unsurpassed expertise<br />
in the most advanced levels of Catia and Surf Cam. We service the<br />
aerospace, aircraft and commercial industries.<br />
Magnolia Plastics, Inc.<br />
T13<br />
5547 Peachtree Industrial Blvd., Chamblee, GA 30341<br />
www.magnoliaplastics.com<br />
Established in 1957, Magnolia Plastics, Inc., provides high-performance,<br />
custom-formulated epoxy systems to the aerospace, defense,<br />
transportation, electronics, general and commercial aircraft, construction,<br />
recreation, and sports industries worldwide. Magnolia produces<br />
a variety of innovative epoxy compounds including adhesives, syntactics,<br />
electrically and thermally conductive epoxies, potting and encapsulating<br />
epoxies, and tooling resins.<br />
23—
SAMPE ’07 Exhibitors Products and Services<br />
Maverick Corporation 117<br />
11379 Grooms Road, Blue Ash, OH 45242<br />
www.maverickcorp.com<br />
Maverick Corporation is a leader in research, development and production<br />
of high-performance, high-temperature,<br />
advanced composite materials for propulsion,<br />
aircraft structures, missile structures,<br />
and medical applications. Maverick manufactures<br />
high-rate production of flight-qualified<br />
materials, including MVK-19, AFR-PE-4 and MVK-16 Non-MDA<br />
Polyimide composites capable of withstanding environments at 500-<br />
700°F for Autoclave, RTM, Compression-molding processes. Maverick<br />
is also an aerospace qualified source for small, compression-molded<br />
engine bushings and wear components for military and commercial<br />
aircraft jet engines.<br />
Northern Fiber Glass Sales 145<br />
102 Tide Mill Road, Hampton, NH 03842<br />
www.nfgsales.com<br />
Northern Fiber Glass Sales is a manufacturer's representative and distributor<br />
of premium quality process and structural composite materials<br />
to the aerospace, medical, marine, automotive, motorsports, leisure<br />
sports and tooling industries in the eastern USA. Northern offers technical<br />
sales and service and is ISO 9001:2000 and AS 9120:2002-10<br />
certified.<br />
NuSil Technology 130<br />
1050 Cindy Lane, Carpinteria, CA 93013<br />
www.NuSil.com<br />
NuSil Technology is the cutting edge manufacturer of silicone materials<br />
for aerospace products requiring precise, predictable, cost-effective<br />
materials performance. NuSil's silicone materials deliver thermally and<br />
electrically conductive adhesives, potting compounds, encapsulants,<br />
fast-curing silicones, as well as, the most extensive line of low outgassing<br />
silicone materials in the industry. Our line of aerospace-applicable<br />
silicone is highly resilient in the extreme temperatures of space.<br />
ISO-9001 certified since 1994, NuSil operates state-of-the-art laboratories<br />
and processing facilities in North America and Europe and provides<br />
on-site, in-person application engineering support worldwide.<br />
Physical Acoustics<br />
T32<br />
195 Clarksville Road, Princeton Junction, NJ 08550<br />
www.pacndt.com<br />
Physical Acoustics, a subsidiary of MISTRAS Group Inc., designs, develops<br />
and manufactures Acoustic Emission (AE) and Automated Ultrasonics<br />
instruments and software and Acoustic Emission Sensors (ISO-<br />
9001). Products include remote acoustic emission online monitoring<br />
systems that can combine an array of sensor inputs and handheld<br />
instrumentation for acoustic emission and ultrasonics.<br />
Quantum Composites, Inc.<br />
T38<br />
1310 South Valley Center Drive, Bay City, MI 48706<br />
www.quantumcomposites.com<br />
QCI is a leading developer and supplier of structural and semi structural<br />
thermoset material and parts solutions. QCI's Engineered Structural<br />
Composite (ESC) materials include carbon or glass reinforcement<br />
in epoxy, phenolic, vinyl ester and polyimide resin matrices, supplied<br />
under Lytex® AMC® QC trade names. These materials provide exceptional<br />
properties in three dimensional compression molded structures.<br />
QCI is a subsidiary of Premix, Inc. a leading supplier of thermoset<br />
composite solutions based in North Kingsville, OH.<br />
—24<br />
Quartus Engineering, Inc.<br />
T16<br />
10251 Vista Sorrento Pkwy, San Diego, CA 92121<br />
www.quartus.com<br />
Quartus Engineering provides mechanical engineering design, analysis,<br />
testing, and prototyping services to the aerospace, defense, electronics,<br />
consumer products, and entertainment industries in the US<br />
and Canada. Our staff of 55 mechanical and aerospace engineers<br />
are located in San Diego and Los Angeles.<br />
Reno Machine Company, Inc. 131<br />
170 Pane Road, Newington, CT 06111<br />
www.reno-machine.com<br />
Reno Machine will be presenting their design<br />
and manufacturing process of precision metallic<br />
molds used in the molding of complex composite<br />
parts. This cost effective process begins<br />
with the utilization of the parts solid model that<br />
in turn drives five axis CNC gantry mills. Costly<br />
man hours associated with hand polishing is minimized, producing<br />
net configuration parts.<br />
Richmond Aircraft Products 145<br />
13503 Pumice Court, Norwalk, CA 90650<br />
www.richmondaircraft.com<br />
Multi-layered Vac-Pak bagging films, release films,<br />
peel plies, release fabrics, breathers, bleeders,<br />
sealant tapes, pressure sensitive tapes, vacuum<br />
valves and hoses for all temperatures and resin<br />
systems. Custom shaped heat-sealed vacuum<br />
bags for any size application. Low cost materials<br />
for use in wind energy, marine and resin infusion<br />
industries.<br />
SAMPE 111<br />
1161 Park View Drive, Suite 200, Covina, CA 91724<br />
www.sampe.org<br />
SAMPE, The Society for the Advancement of Material and Process<br />
Engineering, an international professional member-owned<br />
society, provides information via technical forums, journals,<br />
and reference materials. As the only technical society<br />
encompassing all fields of endeavor in advanced<br />
materials and processes, SAMPE provides a unique and<br />
valuable forum for scientists, engineers and academicians.<br />
SciArt, Inc. 121<br />
CP 100, Drummondville, Quebec J2B 6V6<br />
www.sciart.ca<br />
SciArt, Inc. combines Science and Art in Weaving. SciArt provides<br />
reinforcing fabrics of carbon, aramid, and S2 glass utilizing traditional<br />
bi-directional weaving, unidirectional hot-melt fill-yarns, and no-crimp<br />
unidirectional surface-bonded technology. SciArt's products find wide<br />
use in automotive, aircraft, infrastructure, marine, medical, recreational<br />
and sporting goods applications.<br />
SouthWest NanoTechnologies 114<br />
2360 Industrial Blvd., Norman, OK 73069<br />
www.swentnano.com<br />
SouthWest NanoTechnologies (SWeNTR) was founded in April 2001 to<br />
commercialize nanotube technology developed by Professor Daniel<br />
Resasco at the University of Oklahoma. The CoMoCATR brand is widely<br />
recognized for quality and scalability. Our mission is to be the leading<br />
producer of high quality single wall carbon nanotubes and to be an<br />
innovative partner in the continued development and application of<br />
carbon nanotubes.
SAMPE ’07 Exhibitors Products and Services<br />
TA Instruments<br />
109 Lukens Drive, New Castle, PA 19720<br />
www.tainstruments.com<br />
T37<br />
Technical Fibre Products Inc. 124<br />
259 Route 17K, Newburgh, NY 12550<br />
www.techfibres.com<br />
TFP provides surfacing, fire protection and physical property modification<br />
solutions to the aerospace, automotive, construction, transportation,<br />
medical device and recreation/consumer product markets. Products<br />
include non-woven mats and veils made from aramids, carbon<br />
(pan, pitch, and nickel coated), intumescents, polyester, glass, ceramic<br />
and quartz. Solutions can be custom tailored to specific requirements<br />
such as conductivity/resistivity, EMI/RFI shielding, passive fire protection,<br />
corrosion protection, friction, and surfacing/adhesive systems.<br />
Ten Cate Advanced Components 142<br />
18410 Butterfield Blvd., Morgan Hill, CA 95037<br />
www.tencate.com<br />
A worldwide supplier of thermosetting and thermoplastic advanced composite<br />
materials for aerospace and commercial markets, and armoring<br />
solutions based on composite and composite/ceramic technologies.<br />
Products offered; fabric and unidirectional prepregs, syntactic foams,<br />
film and paste adhesives, RTM and VARTM resin systems, and thermal<br />
management materials. TenCate also offers a complete line of antiballistic<br />
solutions for personal, vehicle and aircraft protection for military<br />
and civilian applications. "Materials that make a difference".<br />
Thermal Wave Imaging 109<br />
845 Livernois, Ferndale, MI 48220<br />
www.thermalwave.com<br />
Dedicated exclusively to the advancement of Infrared Nondestructive<br />
Testing (NDT). Founded in 1993, we have established ourselves as the<br />
world leader in the development and commercialization of thermographic<br />
NDT, serving the aerospace, automotive, and power generation<br />
industries. Our primary mission is to provide our customers with<br />
complete, "real world" solutions that address the entire spectrum of<br />
technical, economic, and human factors requirements that are essential<br />
to today's global industrial environment.<br />
Thinky Corporation<br />
T18<br />
3-7-16 twamoto-cho Chiyoda-ku, Tokyo<br />
www.thinky.co.jp<br />
The THINKY mixer, with or without the use of vacuum, mixes, disperses,<br />
mills and degases materials in seconds to minutes in your pot<br />
such as jar, beaker, bottle, syringe or cartridge. THINKY technology<br />
that started with a one patent of Hiroshige Ishii, THINKY CTO, is now<br />
applied to wide ranges of application, by 18,000 customers in the<br />
world. THINKY mixer accepts 0.5g to 5kg material per material containers<br />
or models.<br />
Ticona Engineering Polymers, Inc. 116<br />
8040 Dixie Highway, Florence, KY 41042<br />
www.ticona.com<br />
Fortron® Polyphenylene Sulfide (PPS) engineering polymers for composite<br />
applications involving pre-pregs, non-wovens, fibers, filaments,<br />
films and papers. PPS is inherently<br />
flame retardant, has low smoke characteristics<br />
and excellent chemical, hydrolysis<br />
and temperature performance<br />
to 240°C. Celstran® long-fiber (LFRT) and continuous fiber (CFRTP)<br />
reinforced thermoplastics can be adapted using a wide range of resins,<br />
fibers and additives to meet precise mechanical, thermal and chemical<br />
performance requirements. Ticona will also feature Vectra® liquid<br />
crystal polymers (LCP).<br />
Tinius Olsen Testing Machine Co., Inc.<br />
T22<br />
1065 Easton Road, Horsham, PA 19044<br />
www.tiniusolsen.com<br />
Tinius Olsen is the leading manufacturer and supplier of testing systems<br />
which are designed for R&D and QC departments to measure the<br />
strength and performance of both materials and finished components.<br />
Whole series of physical tests are available including tension, shear,<br />
compression, flex/bend, puncture/burst, tear, peel, melt flow, impact,<br />
friction, stiffness, heat distortion/Vicat, and torsion, in accordance with<br />
key ISO, EN, ASTM, DIN, BS, JIS etc. and industrial testing standards.<br />
Toho Tenax America, Inc.<br />
T35<br />
131 Cardiff Valley Road, Rockwood, TN 37854<br />
www.tohotenaxamerica.com<br />
Toho Tenax America is part of Teijin, Ltd., the world's largest manufacturer<br />
of advanced industrial fibers. Toho Tenax Group is a leading<br />
producer of carbon fiber, with manufacturing sites in Japan, Germany<br />
and the United States. Stop by our booth and learn more about our<br />
new industrial-grade 24k, HTR40.<br />
Trelleborg Emerson & Cuming<br />
T25<br />
290 Forbes Blvd., Mansfield, MA 02048<br />
www.trelleborg.com/eandc<br />
Trelleborg Emerson & Cuming, Inc. a Delaware Corporation, announces<br />
the opening of its new corporate headquarters, manufacturing and<br />
research facility in Mansfield. The state-of-the-art, 81,000 square-foot<br />
plant with a 5,000 square-foot R&D Center produces syntactic foams,<br />
extrusions, Eccospheres®, coated glass and ceramic Microspheres,<br />
Macrosphere and Syntac® machinable materials. The products are<br />
widely used in the fabrication of advanced composite parts, adhesives,<br />
signature management systems and tooling for aerospace, defense,<br />
marine and industrial applications.<br />
Ultracor Inc.<br />
T14<br />
136 Wright Brothers Avenue, Livermore, CA 94551<br />
www.ultracorinc.com<br />
Ultracor Inc. manufactures specialty honeycomb from many different<br />
types of reinforcements and resin including carbon/cyanate, carbon/<br />
polyimide, quartz/cyanate, PBO/epoxy, etc., under the trade name of<br />
Ultracor®. Our newest product is a flexible honeycomb, "UltraFlex",<br />
which can be produced from any type of reinforcement/resin combination.<br />
University of Dayton Research Institute 125<br />
300 College Park, Dayton, OH 45469-0101<br />
www.udri.udayton.edu<br />
The University of Dayton Research Institute (UDRI), recognized by NSF<br />
as the #2 University for funded materials research in the<br />
nation, has significant expertise and experience in many<br />
multidisciplinary areas like traditional composite materials,<br />
nanocomposites, nanocharacterization, e-beam curing,<br />
coatings/corrosion control, aging systems, ballistic<br />
testing, sensors development, NDE, power and propulsion,<br />
mechanical and structural property characterization.<br />
Webcore Technologies, Inc.<br />
T34<br />
8821 Washington Church Road, Dayton, OH 45442<br />
www.webcoreonline.com<br />
A designer and manufacturer of TYCOR - a family of composite sandwich<br />
core products designed for use in vacuum infusion<br />
processes, RTM lite, closed molding and<br />
other resin transfer systems. TYCOR cores provides<br />
superior strength and stiffness, impact<br />
resistance, and durability, while affording<br />
weight and cost savings, for structural applications in transportation,<br />
wind energy, marine, industrial, and infrastructure markets; excellent<br />
technical product and process support available.<br />
25—
SAMPE Upcoming Events<br />
Japan International SAMPE<br />
Symposium & Exhibition (JISSE)<br />
Tokyo Big Sight, Tokyo, Japan<br />
SAVE THE DATES<br />
Technical Tour: November 27, 2007<br />
Conference & Exhibition: November 28-30, 2007<br />
Through the sponsorship of nine JISSE annual<br />
conferences, SAMPE Japan has contributed greatly to<br />
the global advancement of materials and processes.<br />
Focusing on efficiency and environment, SAMPE Japan<br />
offers three full days of sessions, panels and tutorials.<br />
To enhance the conference, a technical tour to JAXA<br />
Advanced Composites Center is being offered.<br />
Unique to the SAMPE Japan conference is the SIT<br />
Academic Summit Meeting. Six partner universities<br />
gather to exchange information on the materials science<br />
related issues, and thus to explore the possibility of<br />
collaboration on the common research interests among<br />
the six partner universities. Conference attendees are<br />
encouraged to attend!<br />
For more information, contact Prof. Nobuo Takeda at<br />
jisse10@smart.k.u-tokyo.ac.jp.<br />
Visit www.sampe.org<br />
SAMPE Asia 2008<br />
Conference & Exhibition<br />
Shangri-La Hotel, Bangkok, Thailand<br />
SAVE THE DATES<br />
Conference and Exhibition: February 11-13, 2008<br />
Endorsed by the Thai Composites Associations, SAMPE<br />
Asia will be the first event organized by SAMPE to be<br />
held in Thailand. Offering a comprehensive technical<br />
program featuring sessions and tutorials on topics<br />
concerning the industry, an additional day has been<br />
added to this conference in response to the increasing<br />
interest in this conference.<br />
To compliment the technical program, SAMPE Asia will<br />
also feature an exhibition featuring tabletop and exhibit<br />
stands. Any interested in exhibiting should act quickly,<br />
as space is being provided on a first come, first served<br />
basis.<br />
Additional information and exhibit space bookings will<br />
be available shortly from SAMPE. To request program<br />
documentation, email SAMPE at SAMPEAsia@sampe.org<br />
Visit www.sampe.org<br />
—26
To discuss available machine and CATIA design time for your upcoming tooling requirements<br />
please contact Jay A. Mulligan at the Reno Machine Company.<br />
27—
—28