Sanyo Denki General Motion Products Catalog - Bay Advanced ...

CLOSED LOOP STEPPING SYSTEMS
High Speed Positioning
High torque performance in the low speed range delivers
a shorter positioning time for a short stroke/high hit rate
application.
Zero Motor Hunting
PB system eliminates the usual motor hunting seen in servo
systems; this is done by applying constant torque delivered to
the motor which is a typical characteristic of stepping motor
systems.
Improved Efficiency
Low motor heat generation is achieved by controlling the
current to the motor which gives you optimum motor performance
through all of the motors speed/torque range.
High Resolution
The position resolution can be subdivided for higher
positioning precision.
Power Source
24 VDC
24 / 48 VDC
110 - 230 VAC
110 - 230 VAC
Motor Size
Holding Torque
28 mm (1.10 in)
42 mm (1.65 in)
0.05 to 0.155 N-m
0.35, 0.39 N-m
60 mm (2.36 in) 1.3 to 1.9 N-m
86 mm (3.39 in) 3.1 to 6.1 N-m
Indexer: Startup preset points or programs in the amplifier memory
using the I/O.
Serial: Control by transmitting speed, acceleration/deceleration and
distance data via serial communication.
Pulse: Motion is generated by responding to pulse input commands
from a host device.