Hand Protection - Gosafe.com

Hand 

Protection 

LOCATION 

La Porte, TX 

Marshall, TX 

Gonzales, LA 

Little Rock, AR 

Tulsa, OK 

TOLL FREE 

(800) 330-9240 

(800) 442-8839 

(877) 854-2178 

(800) 394-9026 

(888) 622-8758 

LOCAL 

(281) 476-5392 

(903) 935-1811 

(225) 647-4509 

(501) 227-5513 

(918) 622-8128

Information 

Hand Protection 

Hand Protection & General Glove Information 

Applicable OSHA Regulation 

OSHA 29 CFR 1910.138 

a) General Requirements. Employers shall 

select and require employees to use appropriate 

hand protection when employees’ 

hands are exposed to hazards such 

as those from: 

Skin absorption of harmful substances; 

• Severe cuts or lacerations; 

• Severe abrasions 

• Punctures; 

• Chemical burns; 

• Thermal burns; and 

• Harmful temperature extremes 

b) Selection. Employers shall base selection 

of the appropriate hand protection on 

an evaluation of the performance characteristics 

of the hand protection relative to: 

• The task(s) to be performed; 

• Conditions present; and 

• The hazards and potential hazards 

identified 

Glove Selection 

There are a variety of factors that influence 

proper glove selection. Follow 

this general guideline to assist in the 

process. 

1) Analyze and evaluate the conditions 

to which you will subject the glove and 

thoroughly analyze any chemicals handled 

2) Determine the types of physical contact, 

such as: 

• harp objects, 

• brasion, 

• Temperature, and 

• Contact duration 

3) Choose the glove with the highest 

rating for chemical and physical conditions. 

4) Determine application needs and 

glove requirements: 

• Breakthrough Detection Time–BDT: 

The time it takes for a chemical to 

pass through the glove material 

measured in minutes. 

• Dexterity: Select unsuppor ted 

(unlined) gloves for extra dexterity 

and sense of touch. If cut, snag, 

puncture, or abrasion-resistance 

is impor tant, match the application’s 

critical factors to the glove’s 

physical characteristics — whether 

suppor ted or unsuppor ted. 

• Grip: Select a grip pattern that 

provides grip needed for the job. 

Common patterns are diamond, 

embossed, pebble, patterned, 

dipped, or smooth. 

• Length: Choose glove length by 

the depth to which the arm will be 

immersed or exposed to chemical 

splash. 

• Size: Correct size will ensure optimum 

wear comfor t, dexterity, and 

employee satisfaction. 

5) Glove colors could be a factor in work 

areas or identifying product exposure. 


Types of Leather 

COWHIDE 

Cowhide is comfor table, durable and 

abrasion resistant. It is the most commonly 

used leather in the glove market. 

Cow leather gloves are typically chrome 

tanned to promote longevity. 

PIGSKIN 

Pigskin offers the greatest breathability 

due to large pores in the hide. Pigskin is 

ideal for wet applications given its tendency 

to remain soft after exposure to 

moisture. 

GOATSKIN 

Goatskin is preferred where tactile sensitivity 

is required. Goat provides excellent 

tensile strength and abrasion resistance. 

The high lanolin content makes it 

one of the softest leathers available. 

DEERSKIN 

Deerskin is a soft, supple and luxurious 

hide. It offers excellent dexterity, durability, 

comfor t and high tensile strength. 

GRAIN LEATHER VS. SPLIT LEATHER 

Grain leather is the smooth, attractive 

exterior side of the animal hide. Grain 

leather is comfor table, durable and offers 

better dexterity and sense of touch. 

Split leather is the internal por tion of 

the animal hide. The rougher texture of 

split leather makes it easy to differentiate 

from grain leather. Split is the most 

popular hide used in manufacturing 

leather palm gloves. It offers abrasion 

resistance for more heavy duty applications. 

Grain 

Split 

Mailing Address: P.O. Box 1025 • Deer Park, TX 77536 105



KEYSTONE THUMB 

Keystone thumbs offer the highest 

range of motion and are the most comfor 

table. This style offers a wide range 

of applications and is the most ergonomically 

correct work glove. 

WING THUMB 

Wing thumbs are designed for open 

handed work [pushing, pulling, lifting, 

etc.] The seams are not exposed to 

wear when the palm is open, thus extending 

the life of the work glove. 

STRAIGHT THUMB 

Straight thumbs are designed for close 

fisted work [shoveling, prying, sweeping, 

etc.] When the fist is closed, the 

seams are out of the wear area. 

Information 


Types of Thumbs 

KEYSTONE 

STRAIGHT 

WING 

Cuff Materials 

RUBBERIZED 

Rubberized cuffs are made from two fabric 

layers with a rubber material laminated in 

between them. This cuff provides moderate 

impact abrasion resistance. 

LEATHER CUFFS 

Leather cuffs are primarily constructed 

from split leather. These cuffs are launderable, 

durable and built for longer wear. 

DUCK CUFFS 

Duck cuffs are made primarily for laundering 

purposes. The material is made from a 

single layer of heavy cotton. 

STARCHED CUFFS 

Starched cuffs are made from two layers 

of fabric laminated and starched together. 

These cuffs provide mild impact and abrasion 

protection. 

DENIM CUFFS 

Denim cuffs are made from a single-ply 

denim fabric. These cuffs are typically used 

in economical products. 

Cuff Styles 

KNIT WRIST 

Promotes warmth, fit and 

helps prevent common particles 

from entering the glove. 

SAFETY CUFF 

2-1/2” in length, this is the 

most common cuff style 

available. Safety cuffs help 

protect the wrist area and 

slide on and off easily. 

GAUNTLET CUFF 

4” in length, the gauntlet 

cuff provides better forearm 

protection. 

BAND TOP 

The band top slides easily on 

and off the hand. It provides 

comfort and moderate wrist 

protection. 

SLIP-ON 

Easy to slide on and off 

the hand. It provides no 

substantial wrist protection. 

Leather Palm Features 

1) Leather Fingertips 

2) Full Leather Forefinger 

3) Welted Seams 

4) Wing Thumb 

5) Continuous Pull 

6) Safety Cuff 

7) Shirred Elastic Back 

8) Knuckle Strap 

Cut & Sewn vs. Dipped 

Cut & Sewn gloves are made from a 

fabric sheet of material which is cut and 

then sewn into a finished product. Cut 

and Sewn gloves can be made into a 

Clute Cut or Gunn Pattern from leather, 

jersey, canvas or terrycloth. As illustrated 

here, they can also be manufactured 

from synthetic materials such as nitrile 

or vinyl that have been laminated or impregnated 

into sheets of fabric. 

CLUTE CUT 

(Example) 

GUNN CUT 

(Example) 

Dipped gloves are manufactured from 

dipping a formed mold covered with a 

prefabricated knit, cotton canvas, string 

knit, etc. shell into a predetermined 

polymer such as Nitrile, PVC, Latex, 

Neoprene and/or Polyurethane. 

CUT & SEWN 

DIPPED 

106 

Web: www.gosafe.com • Phone: (800)330-9240 • Fax: (281)476-5394


PVC Dipped Gloves 

SINGLE DIPPED OR DOUBLE 

DIPPED 

Double dipped PVC gloves provide better 

abrasion and chemical resistance 

while single dipped products offer an 

economical alternative. 

SMOOTH & TEXTURED FINISHES 

Smooth 

No additional gripping capabilities, but 

economical. 

Rough 

Better gripping capabilities than smooth- 

-remains economical in price. 

Sandpaper Finish 

Enhances gripping capabilities compared 

to rough finish. 

Etched Finish 

This texture is associated with our premium 

PVC line and offers enhanced 

gripping capabilities. 

Jersey vs. Interlock 

Jersey 

Napped jersey lining enhances comfor t 

and sweat absorption 

Interlock 

Lightweight liner that provides a “cool” 

wear. Less comfor table than the jersey 

lining, but more economical. 

Cut Protection Resources 

www.ansi.org - ANSI 

American National Standards Institute 

www.astm.org - ASTM 

American Society for Testing & 

Materials 

www.safetyequipment.org - ISEA 

International Safety Equipment Ass. 

Information 

Cut Protection and Cut Resistance 

Cut protection is the combination of 

influences that tend to prevent a worker 

from being cut. Material proper ties 

such as cut resistance tear strength, and 

abrasion resistance as well as proper ties 

such as grip and dexterity are all important 

aspects of cut protection. However, 

cut protection also includes other factors 

not related to protective apparel such as 

machine guarding, workplace set-up, 

working conditions and worker training. 

Cut resistance, defined as the ability of 

a material to resist damage when challenged 

with a moving sharp edged object, 

is only one component of cut protection. 

Because cut resistance can be 

measured using standard testing equipment, 

it’s often used when comparing 

the safety of various products. 

Lacerations are the #1 Safety Issue in 

Most Plants and Construction Sites. The 

most common causes of Hand Injury are: 

• No hand protection being worn at 

time of injury 

Cut Protection and Cut Resistance 

EN APPROVED METHOD: 

The blade moves and the weight is 

constant. The number of cycles is measured. 

In the European market gloves are 

evaluated according to method EN 388, 

the mandatory performance standard for 

all gloves as standardized and regulated 

by CEN (Committee for European Normalization). 

Using the Couptest apparatus, 

a circular cutting blade of specified 

sharpness under constant weight load 

rotates back and for th over a rectangular 

test specimen for a series of five cut failures. 

A standard calibration reference 

material is cut in like fashion before and 

after each cut of the test specimen itself. 

These reference values are added to the 

test specimen value and divided by the 

average reference value, resulting in a 

cut index. Results are classified by CEN 

into six performance levels. 

ASTM APPROVED METHOD: 

The distance is fixed (2”) and the weight 


• Poor compliance to PPE programs 

• Lack of proper cut protection in 

• PPE program 

U.S. Bureau of Labor statistics estimates 

annual expenses of $382,000,000 

result from hand injury in the construction 

industry alone. 

Factors to Determine “Right” Cut Resistant 

Glove: 

• Risk of a cut 

• Potential severity 

• Grip issues 

• Abrasion 

• Puncture 

• Ergonomics 

Technologies Affecting Cut Resistance: 

• High Performance Fibers (Kevlar, 

• Dyneema, Spectra-HP-PE, 

• Intcept, Dual TEC) 

• Coatings-Resistance & Protection 

• Combinations of Fibers 

• (Steel-Polyester-Nylon) 

varies. The maximum weight is measured. 

Approved test procedure/machine 

approved by the ASTM committee to 

test cut resistance uses a load-versusdistance 

evaluation to determine the cutthrough 

point of a material. 

Testing Process: 

A cutting blade (surgical-grade razor) 

with a specified load (weight) is moved 

across a material. 

The distance at which the blade traveled 

from the original contact point to the cutthrough 

point is measured for several 

loads (weights in grams). 

After several tests, a load-versus-distance 

curve is plotted and used to determine 

the load (weight) required to cut 

through the material at 25MM (reference 

load). 

Mailing Address: P.O. Box 1025 • Deer Park, TX 77536 107 

Hand Protection



Introduction to the 

8th Edition 

When reviewing the following recommendations, 

remember that tests are conducted under 

laboratory conditions, and that actual workplace 

conditions usually dictate a combination of performance 

capabilities. A product’s resistance to 

cuts, punctures, and abrasion must also be taken 

into account as a critical usage factor. A glove 

with excellent permeation resistance may not be 

adequate if it tears or punctures easily. Always 

factor in the physical performance requirements 

of the job or application when selecting a chemical 

resistant glove. 

Ansell’s ASTM standard permeation and degradation 

tests are presented on the following pages 

as an aid in determining the general suitability of 

various products for use with specific chemicals. 

Because the conditions of ultimate use are beyond 

our control, and because we cannot run permeation 

tests in all possible work environments and 

across all combinations of chemicals and solutions, 

these recommendations are advisory only. 

THE SUITABILITY OF THE PRODUCT FOR A SPE- 

CIFIC JOB MUST BE DETERMINED BY TESTING 

BY THE PURCHASER. 

How to Read the Charts 

Information 

Chemical Resistance Guide 

Definition of Key Terms 

Permeation is a process by which a chemical 

can pass through a protective film without going 

through pinholes, pores, or other visible openings. 

Individual molecules of the chemical enter the 

film, and “squirm” through by passing between 

the molecules of the glove compound or film. In 

many cases the permeated material may appear 

unchanged to the human eye. 

Chemical permeation can be described in 

simple terms by comparing it to what happens to 

the air in a balloon after several hours. Although 

there are no holes or defects, and the balloon is 

tightly sealed, the air gradually passes through 

(permeates) its walls and escapes. This simple 

example uses gas permeation, but the principle is 

the same with liquids or chemicals. 

Permeation data are presented in two values: 

Breakthrough Time and Rate. Breakthrough times 

(min.) are the times observed from the start of 

the test to first detection of the chemical on the 

other side of the sample (for test methodology, 

see page 97). These times represent how long a 

glove can be expected to provide effective permeation 

resistance when totally immersed in the test 

chemical. 

Permeation rates are the highest flow rates 

Three categories of data are represented for each Ansell product and corresponding chemical: 

1) overall degradation resistance rating; 2) permeation breakthrough time, and 3) permeation rate. 

Standards for Color-Coding 

A glove-chemical combination receives GREEN if either set of the following conditions is met: 

The Degradation Rating is Excellent or Good 

The Permeation Breakthrough Time is 30 minutes or greater 

The Permeation Rate is Excellent, Very Good, or Good 

OR 

The Permeation Rating is not specified 

The Permeation Breakthrough Time is 240 minutes or greater 

The Degradation Rating is Excellent, or Good 

A glove-chemical combination receives RED if either set of the following conditions is met: 

The Degradation Rating is Poor or Not Recommended 

OR‘ 

The Degradation Rating is Degrades with Delamination (DD) 

The Permeation Breakthrough Time is less than 20 minutes 

All other glove-chemical combinations receive YELLOW . In other words, any glove chemical 

combination not meeting either set of conditions required for Green, and not having a 

Red degradation rating of either Poor or Not Recommended, receives a YELLOW rating. 

recorded for the permeating chemicals through 

the glove samples during a six-hour or eight-hour 

test. These qualitative ratings are comparisons of 

permeation rates to each other. 

Degradation is a reduction in one or more 

physical properties of a glove material due to 

contact with a chemical. Certain glove materials 

may become hard, stiff, or brittle, or they may 

grow softer, weaker, and swell to several times 

their original size. If a chemical has a significant 

impact on the physical properties of a glove material, 

its permeation resistance is quickly impaired. 

For this reason, glove/chemical combinations 

rated “Poor” are usually not tested for permeation 

resistance, and combinations rated “Not Recommended” 

are never tested for permeation resistance. 

Please note, however, that permeation and 

degradation do not always correlate. 

The overall Degradation Rating for each chemical 

is explained in “How To Read The Charts.” 

Key to Permeation Breakthrough 

>Greater than (time)

Information 





Information 


110 


Information 


Methodology 


Permeation Testing 

Ansell conducts permeation testing 

in accordance with ASTM Method F 739 

standards. A specimen is cut from the 

glove and clamped into a test cell as a 

barrier membrane (see illustration). The 

“exterior” side of the specimen is exposed 

to a hazardous chemical. At timed 

intervals, the unexposed Methodology 

“interior” side of the test cell is checked 

for the presence of the permeated chemical 

and the extent to which it may have 

permeated the glove material. 

This standard allows a variety of 

options in analytical technique and collection 

media. At Ansell, dry nitrogen 

is the most common medium and gas 

chromatography with FID detection is the 

most common analytical technique. Our 

Research Department also uses liquids 

such as distilled water and hexane as 

collecting media, and techniques such 

as conductivity, colorimetry, and liquid 

chromatography for analysis of the collecting 

liquid. 8th Edition Form No. CRG- 

GC. 9/08 ©2008 Ansell Healthcare. All 

Rights Reserved. 

Degradation Testing 

Patches of the test material are cut 

from the product. These patches are 

weighed and measured, and then completely 

immersed in the test chemical for 

30 minutes. The percentage of change 

in size is determined, and the patches 

are then dried to calculate the percentage 

of weight change. Observed physical 

changes are also reported. Ratings are 

based on the combined data. 



Leather Drivers 

A 

A. Standard Grain Cowhide Driver/Straight Thumb 

Grain cow leather gloves are smooth, attractive, comfortable and durable. Offer better dexterity 

and sense of touch. Gloves are unlined and feature straight thumb and shirred elastic back. 

SKU Description Size UOM Price 

MSG8201 

Standard grain cowhide driver, unlined, straight thumb S-L DZ $49.15 

MSG8201XL 

Standard grain cowhide driver, unlined, straight thumb XL DZ $50.85 

MSG8201XXL 

Standard grain cowhide driver, unlined, straight thumb 2XL DZ $53.20 


B. Standard Grain Cowhide Driver/Keystone Thumb 


and sense of touch. Gloves are unlined and feature keystone thumb and shirred elastic back. 


MSG8210 

Standard grain cowhide driver, keystone thumb XS - L DZ $57.76 

MSG8210XL Standard grain cowhide driver, keystone thumb XL DZ $59.92 

MSG82102X Standard grain cowhide driver, keystone thumb 2X DZ $67.50 

MSG82103X Standard grain cowhide driver, keystone thumb 3X DZ $70.00 

C 

C. Select Grain Cowhide Driver/Wing Thumb 

B 

Made of select grain cow these gloves are unlined and have a seamless forefinger. They feature 

a wing thumb. 


MSG1200 

Select grain cowhide driver, unlined, wing thumb XS - L DZ $70.05 

MSG1200XL Select grain cowhide driver, unlined, wing thumb XL DZ $73.60 

D. Premium Grain Cowhide Driver/Keystone Thumb 

This driver’s glove is made with premium grade leather on palm and back to provide excellent 

dexterity and abrasion resistance. Used in construction, machine operation, utility work, farming, 

roping and many other general applications. Other features include shirred elastic back 

and keystone thumb. Unlined. 


MSG8235 

Premium grain cowhide driver, unlined, keystone thumb S-L DZ $75.40 

MSG8235XL Premium grain cowhide driver, unlined, keystone thumb XL DZ $79.95 

D 

112 

MSG8225 

E 

E. Select Grain Cowhide Driver/Ball & Tape 

The 8221 unlined driver’s gloves are made of grain cow leather. Features include a keystone 

thumb and a ball and tape back. The 8225 driver’s glove is made of a select grain cowhide and 

features a leather pull strap back and keystone thumb. 


MSG8221 

Select grain cowhide leather driver’s S-L DZ $64.62 

MSG8221XL Select grain cowhide leather driver’s XL DZ $68.23 

MSG8225 

Select grain cowhide driver, leather pullstrap back S-L DZ $71.87 

MSG8225XL Select grain cowhide driver, leather pullstrap back XL DZ $75.40 


Leather Drivers 


A. Split Back, Grain Palm Cowhide Driver 

Made with grain cowhide leather with a gray split leather back and features a slip on cuff with 

a shirred elastic back. Keystone thumb. Unlined. 


MSG8230 

Split back, grain palm cowhide, keystone thumb S-L DZ $51.85 

MSG8230XL Split back, grain palm cowhide, keystone thumb XL DZ $44.30 

A 

C. Grain Pigskin Driver 

B 

B. Split Cowhide Driver 

This driver’s glove is made with pigskin, a more porous leather for greater breath ability. Pigskin 

will retain its softness even after becoming wet. Available in a keystone thumb with shirred 

elastic back. Available in premium grade and regular grade. Unlined. 


MSG8800 

Economy grain pigskin driver, straight thumb S-L DZ $52.13 

MSG8800XL 

Economy grain pigskin driver, straight thumb XL DZ $50.28 

MSG8810 

Economy grain pigskin driver, keystone thumb S-L DZ $52.10 

MSG8810XL 

Economy grain pigskin driver, keystone thumb XL DZ $49.36 

MSG8820 

Premium grain pigskin driver, keystone thumb S-L DZ $59.27 

MSG8820XL 

Premium grain pigskin driver, keystone thumb XL DZ $59.27 

These select split cow leather gloves are unlined and feature a keystone thumb and shirred 

elastic back. Available in gray or russet colors. 


MSG7800 

Russet split cowhide driver, keystone thumb S-L DZ $30.03 

MSG7800XL Russet split cowhide driver, keystone thumb XL DZ $30.03 

MSG7805 

Gray split cowhide driver, keystone thumb S-L DZ $26.95 

MSG7805XL Gray split cowhide driver, keystone thumb XL DZ $26.95 

C 


D 

D. Select Split Back/Grain Palm Pigskin Driver 

This select grain pig palm/split pig back driver is unlined and has a shirred elastic back. Other 

features are keystone thumb and a seamless forefinger. 


MSG8825 

Select split back/grain palm pigskin driver, keystone thumb S-L DZ $43.12 

MSG8825XL Select split back/grain palm pigskin driver, keystone thumb XL DZ $43.12 

E. Premium Grain Goatskin Driver’s Gloves 

Grain goat leather gloves are unlined and feature keystone thumb and shirred elastic back. 

Goatskin is preferred where tactile sensitivity is required. Goat provides excellent tensile 

strength and abrasion resistance. The high lanolin content makes it one of the softest leathers 

available. 


MSG8500 

Premium grain goatskin driver’s gloves, Keystone thumb S-L DZ $71.87 

MSG8500XL Premium grain goatskin driver’s gloves, Keystone thumb XL DZ $75.40 

MSG8500XXL Premium grain goatskin driver’s gloves, Keystone thumb 2XL DZ $79.03 

MSG8500XXXL Premium grain goatskin driver’s gloves, Keystone thumb 3XL DZ $80.88 

E 



Insulated Leather Drivers 

A 

A. Premium Grain Pigskin Driver/Thinsulate ® Lined 

This driver’s glove is made with pigskin, a more porous leather for greater breath ability. They 

Are Thinsulate ® lined and features a keystone thumb and a shirred elastic back. 


MSG8942 

Premium grain pigskin, Thinsulate lined, keystone thumb S-L DZ $82.65 

MSG8942XL Premium grain pigskin, Thinsulate lined, keystone thumb XL DZ $91.55 


B. Premium Grain Pigskin Driver/Red Fleece Lined 

Visibly more porous leather for greater breath ability. Returns to original softness after becoming 

wet from application or perspiration. All general purpose applications plus requirements 

for wet or insulated (cold/hot) conditions. Features a keystone thumb and shirred elastic back. 


MSG8922 

Premium grain pigskin driver, red fleece lined, keystone thumb S-L DZ $73.60 

MSG8922XL Premium grain pigskin driver, red fleece lined, keystone thumb XL DZ $77.22 

MSG89222X Premium grain pigskin driver, red fleece lined, keystone thumb 2X DZ $80.85 

C 

C. Split Cowhide Driver/Red Fleece Lined 

B 

These gloves are made from select split cow leather in a russet color with a red fleece lining. 

Features a keystone thumb and shirred elastic back. 


MSG7910 

Split cowhide driver, red fleece lined, keystone thumb S-L DZ $44.93 

MSG7910XL Split cowhide driver, red fleece lined, keystone thumb XL DZ $44.93 

D. Premium Grain Cowhide Driver/White Fleece Lined 

This driver’s glove keeps your hands warm while allowing outstanding dexterity. Features 

include white fleece lining, shirred elastic back and keystone thumb. 


MSG8245 

Premium grain cowhide, white fleece lined, keystone thumb S-L DZ $82.57 

MSG8245XL Premium grain cowhide, white fleece lined, keystone thumb XL DZ $86.20 

MSG8245XXL Premium grain cowhide, white fleece lined, keystone thumb 2X DZ $89.83 

D 

E 

E. Premium Grain Cowhide Driver/Red Fleece Lined 

This full leather driver’s glove is made with select leather for abrasion resistance red fleece 

lined for warmth and comfort. Other features include shirred elastic back and keystone thumb. 


MSG8240 

Premium grain cowhide, red fleece lined, keystone thumb S-L DZ $93.37 

MSG8240XL Premium grain cowhide, red fleece lined, keystone thumb XL DZ $97.00 

MSG8240XXL Premium grain cowhide, red fleece lined, keystone thumb 2X DZ $100.53 

114 


Leather Palms 


A. Premium Grain Cowhide Leather Palm 

Glove features fully wrapped premium leather index fingers and thumbs, leather fingertips, 

leather knuckle straps, wing thumb design and shirred elastic back. Choose 2-1/2” safety cuff 

or 4” gauntlet cuff. 


MSG8300 

Premium grain cow leather palm glove, 2 1/2” Rubberized Safety Cuff S-L DZ $66.43 

MSG8300XL 

Premium grain cow leather palm glove, 2 1/2” Rubberized Safety Cuff XL DZ $70.05 

MSG8310 

Premium grain cow leather palm glove, 4” Rubberized Gauntlet Cuff S-L DZ $69.15 

MSG8310XL 

Premium grain cow leather palm glove, 4” Rubberized Gauntlet Cuff XL DZ $72.68 

A 

C. Premium Shoulder Split Cowhide Leather Palm 

B 

B. Heavy Side Split Cowhide Leather Palm 

These premium shoulder split cow leather work gloves feature a gunn cut pattern, knuckle 

strap, and 2-1/2” rubberized safety cuff. 


MSG7300RS Premium leather palm gloves, 2 1/2” rubberized safety cuff S DZ $26.03 

MSG7300RM Premium leather palm gloves, 2 1/2” rubberized safety cuff M DZ $26.03 

MSG7300RL Premium leather palm gloves, 2 1/2” rubberized safety cuff L DZ $26.03 

MSG7300RXL Premium leather palm gloves, 2 1/2” rubberized safety cuff XL DZ $26.95 

MSG7300RXXL Premium leather palm gloves, 2 1/2” rubberized safety cuff 2XL DZ $30.48 

Constructed of heavy side split leather and sewn with Kevlar thread for greater protection and 

extended wear time. The glove features include a leather knuckle strap and a 2-1/2” rubberized 

safety cuff. 


MSG7500AL 

Heavy side split leather palm gloves, 2 1/2” Rubberized safety cuff S-L DZ $49.37 

MSG7500AXL 

Heavy side split leather palm gloves, 2 1/2” Rubberized safety cuff XL DZ $51.18 

C 


D 

D. Side Split Cowhide Leather Palm 

Kevlar sewn gloves made of side split cow leather. Features include a gunn cut pattern, a 

knuckle strap and a 2-1/2” rubberized safety cuff. 


MSG1030 

Side split leather palm gloves, 2 1/2” rubberized safety cuff S-L DZ $37.67 

MSG1030XL Side split leather palm gloves, 2 1/2” rubberized safety cuff XL DZ $37.67 

E. Premium Shoulder, Split Cowhide Double Palm 

Double leather palms provide extra protection and extends wear time. Constructed of premium 

shoulder-split cow leather with 2-1/2” rubberized safety cuff and leather knuckle strap. Gunn 

cut pattern. 


MSG7351RA Premium shoulder, split cowhide double palm, 2 1/2” rubberized safety cuff L DZ $37.67 

E 



Leather Palms 

A 

A. Select Shoulder Cowhide Leather Palm 

Leather gloves are best suited for heavy material handling and general work purpose. Select 

shoulder cow leather glove designed with gunn cut pattern, knuckle strap and 2-1/2” rubberized 

safety cuff. 


MSG7250RS 

Select shoulder leather palm, 2 1/2” rubberized safety cuff S DZ $23.78 

MSG7250R 

Select shoulder leather palm, 2 1/2” rubberized safety cuff L DZ $23.78 


B. Split Cowhide Double Palm 

Leather gloves are best suited for heavy material handling and general work purpose. This 

glove features a shoulder split cowhide leather double palm, striped canvas back, gunn cut 

pattern, knuckle strap and 2-1/2” rubberized safety cuff. 


MSG7261 

Select Shoulder Leather Palm, 2-1/2” Rubberized Safety Cuff M-XL DZ $27.32 

MSG7264 

Select Shoulder Leather Palm, 4” Rubberized Gauntlet Cuff L DZ $28.22 

MSG7261JP Select Shoulder Leather Joint Palm, Rubberized Safety Cuff L DZ $23.22 

MSG7261JPXL Select Shoulder Leather Joint Palm, Rubberized Safety Cuff XL DZ $25.03 

MSG7262JP Select Shoulder Leather Joint Palm, Rubberized Safety Cuff Ladies DZ $23.22 

B 

C 

C. Standard Split Cowhide Leather Palm 


glove features a shoulder split cow leather palm, striped canvas back, gunn cut pattern with a 

knuckle strap, and an option of cuff styles. Leather gloves are best suited for heavy material 

handling and general work purpose. Application examples: construction, maintenance, warehousing, 

assembly, fabricating and general purpose. 


MSG7200R Shoulder split cow leather palm, 2-1/2” Rubberized Safety Cuff S-XL DZ $21.05 

MSG7240 Shoulder split cow leather palm, 4” Rubberized Gauntlet Cuff L DZ $24.22 

D. Split Cowhide Leather Palm 


glove features a shoulder split cowhide leather palm, gunn cut pattern with a knuckle strap. 


MSG7205R Shoulder leather palm gloves, 2-1/2” Rubberized Safety Cuff L DZ $20.15 

MSG7200S Shoulder leather palm gloves, 2 1/2” Starched Safety Cuff L DZ $18.78 

MSG7202S Shoulder leather palm gloves, 2 1/2” Starched Safety Cuff Ladies DZ $18.78 

MSG7235 

Shoulder leather palm gloves, 4” Safety Cuff L DZ $20.60 

D 

116 


Leather Palms 


A. Select Split Cowhide Leather Palm/Knit Wrist 

Made of shoulder split cow leather. Knit wrist with knuckle strap. General purpose applications 

requiring abrasion protection and breath ability. Applications include but not limited to: assembly, 

construction, fabricating, landscaping, maintenance, metal working, mining and sanitation. 


MSG7140L Shoulder split cow leather palm gloves, knit wrist L DZ $21.05 

MSG7142A Shoulder split cow leather palm gloves, knit wrist Ladies DZ $21.05 

A 

B 

B. Split Cowhide Leather Patch Palm 

Leather gloves are best suited for heavy material handling and general work purpose. Shoulder 

split cow leather patch palm glove with striped canvas back, gunn cut pattern, and 2-1/2” 

striped or denim safety cuff. Application examples: construction, maintenance, warehousing, 

assembly, fabricating, and general purpose. 


MSG7210 

Split cow leather patch palm gloves, 2 1/2” Starched Safety Cuff L DZ $15.23 

MSG7220 

Split cow leather patch palm gloves, 2 1/2” Denim Safety Cuff L DZ $15.23 


C 

C. Clute Cut Cowhide Leather Palms/Knit Wrist 

Shoulder leather palm gloves with striped canvas backs. These gloves feature knit wrist and a 

clute cut pattern. 


MSG7120 

Clute Cut leather palms, Knit Wrist L DZ $15.70 

MSG7122 

Clute Cut leather palms, Knit Wrist Ladies DZ $15.43 

D 

D. Clute Cut Cowhide Leather Palm Patch/Knit Wrist 

This Shoulder Leather Palm Patch Glove features a striped canvas back, knit wrist and clute 

cut pattern. 


MSG7020L Clute Cut leather palm patch, Knit Wrist L DZ $15.23 



Premium Leather Palms 

A 

A. Split Cowhide Leather Palm/Foam & Fleece Lined 

Leather gloves are best suited for heavy material handling and general work purpose. Foam 

and fleece lined, split cow leather palm glove with striped canvas back, gunn cut pattern, and 

2-1/2” rubberized safety cuff. Application examples: cold weather work environments, and wet 

weather work environments. 


MSG7260L Split leather palms, foam & fleece lined, 2 1/2” safety cuff L DZ $45.73 


B. Split Cowhide Leather Palm/Thinsulate ® Lined 

Thinsulate lined leather palm glove with a gunn cut pattern and a 2-1/2” rubberized safety cuff. 


MSG7270L Split leather palms, Thinsulate lined, 2 1/2” safety cuff L DZ $59.27 

B 

C 

C. Split Cowhide Leather Palm/Fleece Lined 

Fleece lined leather palm glove with a gunn cut pattern and a 2-1/2” rubberized safety cuff. 


MSG7265L Split leather palms, fleece lined, 2 1/2” safety cuff L DZ $36.30 

D 

D. Split Cowhide Leather Palm/Thinsulate ® & Waterproof Lining 

This Waterproof Leather Palm is Thinsulate ® Lined and has a blue side split leather palm. Other 

features include yellow canvas back, gunn cut pattern and 2-1/2” rubberized safety cuff. 


MSG7465 

Waterproof, Thinsulate lined leather palms, 2 1/2” Safety Cuff M-XL DZ $70.05 

118 


Welding 


A 

A. Select Shoulder Split Cowhide Leather Welders 

Select shoulder welding gloves have a full stock lining, reinforced palms and are Kevlar ® 

sewn. 


MSG7610 

Select shoulder split cowhide leather welders, Kevlar sewn L DZ $70.05 

C. Shoulder Split Cowhide Leather Welders 

B 

B. Premium Side Split Cowhide Leather Welders 

These shoulder Leather welder’s gloves are a black color with reinforced palms. Features 

include Kevlar ® sewn and full sock lining. 


MSG7625 

Shoulder split cowhide leather welder’s gloves, Kevlar sewn XL DZ $59.27 

These premium side split leather, reinforced palm welding gloves feature a thumb guard, they 

are Kevlar ® sewn, have a full sock lining and are fully welted. 


MSG7670 

Premium side split cowhide leather welders, Kevlar sewn XL DZ $93.37 

C 


D 

D. Russet Select Shoulder Welders 

Select shoulder leather. One piece leather back. Fully welted. Turned leather hems. Full sock 

lining, in-sewn at all finger tips. Gray Leather. Gunn pattern. Russet Leather. Reinforced Thumb 

and Palm. Sewn with Kevlar ® . Industry applications: Welding and heat applications. 


MSG7635 

Russet select shoulder welders XL DZ $62.88 

E. Split Cow Welders 

Split cow leather welding gloves feature full sock lining, one-piece back and gray color. Choose 

between men’s or ladies. 


MSG7602 

Split cow welders, ladies Ladies DZ $43.12 

MSG7605 

Split cow welders XL DZ $42.20 

E 



Welding 

A 

A. Premium Grain Cow MIG/TIG Welder’s Gloves 

Top of the line welder’s gloves feature premium grade cowhide leather sewn with Kevlar® 

thread for improved durability. 4” split leather gauntlet cuff protects wrist and forearm. 


MSG8130 

Premium grain leather MIG/TIG welding glove S-XL DZ $87.12 

MSG81302XL Premium grain leather MIG/TIG welding glove 2X DZ $87.12 


B. Standard Grain Cow MIG/TIG Welder’s Gloves 

MIG/TIG welder’s gloves feature standard grain cowhide leather and 4” split leather gauntlet 

cuff for wrist and forearm protection. 


MSG8135 

Standard grain leather MIG/TIG welder’s glove S-L DZ $73.60 

MSG8135XL Standard grain leather MIG/TIG welder’s glove XL DZ $76.32 

B 

C 

C. Premium Grain Goat MIG/TIG Welder’s Gloves 

Mig Tig Welders. Gunn Pattern. Cow-Split Gauntlet Cuffs. Sewn with Kevlar thread. Exceptional 

durability. Greater softness for sense of touch. Excellent abrasion and tensile strength. 

Minimizes hand fatigue. Grain kid goatskin. Industry applications include: Auto industry, building 

materials, chain saw operations, farming, forklift operators, fabricating, furniture industry, 

lumber industry, operating heavy vehicles, mig / tig and heli arc welding, mining, packaging, 

shipping operations and municipalities. 


MSG8530 

Premium grain goat MIG/TIG welder’s gloves, 4” Split Leather Cuff M-L DZ $89.83 

MSG8530XL Premium grain goat MIG/TIG welder’s gloves, 4” Split Leather Cuff XL DZ $94.28 

D 

D. Premium Grain Goat MIG/TIG Welder’s Gloves 

A Premium Grain Goat, Mig/Tig, with split leather band top and clute cut pattern. 


MSG8560- Premium Grain Goat, Mig/Tig, 2” split band top 9-11 DZ $79.03 

120 


High-Vis 


A. Hi Vis Grain Cow Driver’s Gloves 


and sense of touch. Gloves are unlined and feature keystone thumb, shirred elastic back and 

fully coated hi vis orange on fingers tips. 


MSG8250HV 

Unlined grain cow leather drivers, High Vis Fingertips S-L DZ $85.80 

MSG8250HVXL 

Unlined grain cow leather drivers, High Vis Fingertips XL DZ $91.13 

MSG8250HVXXL 

Unlined grain cow leather drivers, High Vis Fingertips 2X DZ $96.08 

MSG8250HV3X 

Unlined grain cow leather drivers, High Vis Fingertips 3X DZ $93.07 

A 

C. Thinsulate ® Lined, Hi Vis Grain Pigskin Leather Palm 

B 

Made with a premium grain pig leather palm and Thinsulate lined. Featuring a hi vis orange 

back, lime green 1-1/2” reflective tape and a 2-1/2” safety cuff. 


MSGF8750L Hi Vis Grain Pigskin Leather Palm, Thinsulate lined, 2 1/2” Safety Cuff L DZ $95.18 

MSGF8750XL Hi Vis Grain Pigskin Leather Palm, Thinsulate lined, 2 1/2” Safety Cuff XL DZ $97.00 

B. Hi Vis Select Shoulder Split Cow Leather Palm Gloves 

Made with a select shoulder split cow leather palm and a hi vis orange back. Features reflective 

tape on the back and a rubberized safety cuff. 


MSGF7250R 

Hi vis select shoulder split cow gloves, rubberized safety cuff L DZ $38.57 

C 


D 

D. Thinsulate ® Lined, Hi Vis Grain Pigskin Leather Palm W/ Knit Wrist 

Made with a premium grain pig leather palm and Thinsulate lined. Features a hi vis orange 

back, 1-1/2” lime green reflective tape and a knit wrist. 


MSGF8760L 

Hi Vis Grain Pigskin Leather Palm, Thinsulate lined, Knit Wrist L DZ $93.37 

MSGF8760XL 

Hi Vis Grain Pigskin Leather Palm, Thinsulate lined, Knit Wrist XL DZ $95.18 

E. Select Grain Hi-Vis Cowhide Driver Gloves With Logo 

Select grain cowhide leather driver glove. Extra protection by keeping safety in mind with Hi-Vis 

orange at the fingertips and a Hi- Vis reminder to “WATCH YOUR HANDS”. Keystone thumb 

is durable and allows for the best flexibility. Shirred elastic wrist and welted seams on middle 

fingers. 


WCHE990KOT 

Select Grain Cowhide Driver Gloves, Keystone Thumb, Hi-Vis XS-XL DZ $67.50 

WCHE990KOT2X 

Select Grain Cowhide Driver Gloves, Keystone Thumb, Hi-Vis 2X DZ $85.52 

WCHE990KOT3X 

Select Grain Cowhide Driver Gloves, Keystone Thumb, Hi-Vis 3X DZ $105.00 

E 



High-Vis 

A 

A. Hi Vis Cotton Canvas Gloves with PVC Dots 

Hi-vis canvas gloves with black PVC dots. Features a knit wrist. 

SKU Description Color UOM Price 

MSG2710 

Hi vis canvas gloves with black PVC dots Orange DZ $13.88 

MSG2715 

Hi vis canvas gloves with black PVC dots Lime Green DZ $13.88 

MSG2720 

Hi vis canvas gloves with black PVC dots Yellow DZ $13.88 


B. Hi-Vis, Corded, Poly-Cotton Double Palm 

Hi-vis, double palm canvas gloves. Made from a poly/cotton blended, corded fabric. Features 

a knit wrist. 


MSG2800CD Poly/Cotton, Corded Canvas Double Palm, Knit Wrist Orange DZ $21.40 

MSG2810CD Poly/Cotton, Corded Canvas Double Palm, Knit Wrist Lime green DZ $21.40 

MSG2820CD Poly/Cotton, Corded Canvas Double Palm, Knit Wrist Yellow DZ $21.40 

B 

C 

C. Hi Vis Corded Cotton Canvas Double Palm Gloves 

Made of 100% cotton, corded canvas. Features double palms and knit wrist. Heavy-weight. 


MSG2830CD 100% cotton, hi-vis corded double palm gloves, knit wrist Yellow DZ $23.22 

MSG2840CD 

100% cotton, hi-vis corded double palm gloves, knit wrist Orange DZ $23.22 

MSG2850CD 

100% cotton, hi-vis corded double palm gloves, knit wrist Lime green DZ $23.22 

D. Hi Vis Cotton Canvas Double Palm Gloves 

Hi Vis double palm made of 100% cotton canvas featuring a knit wrist. 


MSG2860C 

Hi-vis double palm cotton gloves Orange DZ $22.40 

MSG2865BD 

Hi-vis double palm cotton gloves, with black PVC dots Orange DZ $23.22 

MSG2870C 

Hi-vis double palm cotton gloves Lime Green DZ $22.40 

MSG2875BD 

Hi-vis double palm cotton gloves, with black PVC dots Lime Green DZ $23.22 

D 

122 


Canvas 


A 

A. PVC Dotted Cotton Canvas Gloves 

PVC dotted, cotton canvas gloves feature clute cut and straight thumb. Knit wrist promotes 

warmth, fit, and helps prevent common particles from entering the glove. 


MSG2602 

8 oz, PVC Dotted, Canvas Gloves, Clute Cut, Knit Wrist Ladies DZ $9.27 

MSG2608 

8 oz, PVC Dotted, Canvas Gloves, Clute Cut, Knit Wrist L DZ $9.35 

MSG2610 

10 oz, PVC Dotted, Canvas Gloves, Clute Cut, Knit Wrist L DZ $11.35 

MSG2612 

10 oz, PVC Dotted, Canvas Gloves, Clute Cut, Knit Wrist Ladies DZ $13.20 

B 

B. Clute Cut, Cotton Canvas Gloves 

Premium cotton canvas with clute cut and a knit wrist. 


MSG2000 

8oz, Clute Cut Cotton Canvas Gloves, Knit Wrist L DZ $8.98 

MSG2000V 

Standard Weight, Clute Cut Cotton Canvas Gloves, Knit Wrist L DZ $7.63 

MSG2002 

Standard Weight, Clute Cut Cotton Canvas Gloves, Knit Wrist Ladies DZ $7.53 

MSG2100 

10 oz, Clute Cut, Cotton Canvas Gloves, Knit Wrist L DZ $9.35 

MSG2100CD 

10oz, Clute Cut, Corded Canvas Gloves, Knit Wrist L DZ $14.23 

MSG2200 

12 oz, Clute Cut, Cotton Canvas Gloves, Knit Wrist L DZ $11.17 


C 

C. Cotton Canvas Gloves with Hi Vis PVC Dots 

Cotton canvas gloves with high vis orange PVC dots. Features a clute cut, a straight thumb 

and knit wrist. 


MSG2640K 12 oz, Cotton Canvas Gloves, Kevlar Sewn, Knit Wrist, Hi Vis PVC Dots L DZ $17.05 

MSG2650 

12 oz Cotton Canvas Gloves, Knit Wrist, Hi Vis PVC Dots L DZ $12.43 

MSG2670 

10 oz Cotton Canvas Gloves, Knit Wrist, Hi Vis PVC Dots L DZ $11.62 

D 

D. Cotton Canvas Double Palm Gloves 

Cotton canvas gloves are primarily used for comfort and breath ability in general purpose 

applications. Glove features canvas double palm/nap in or nap out and clute cut. Knit wrist 

promotes warmth, fit, and helps prevent common particles from entering the glove. 


MSG24101 

Cotton canvas gloves w/double palm/nap out/red knit wrist L DZ $17.05 

MSG2430 

Cotton canvas gloves w/double palm/nap out/knit wrist L DZ $16.33 

MSG24101 



Jerseys 

A 

A. Natural Color 2-Piece Jersey Gloves 

This general purpose glove is available in natural (cotton) color, constructed of a soft, jersey 

material. The durable two-piece construction glove, is reversible with knit wrists. Available in 

mens and ladies sizes. 


MSG1300C Natural color, 2-piece jersey gloves, knit wrist L DZ $7.72 

MSG1302C Natural color, 2-piece jersey gloves, knit wrist Ladies DZ $7.53 


B. Brown Jersey Gloves 

This standard weight glove is clute cut and constructed of a soft, jersey material. It provides 

optimum dexterity without compromising comfort and protection. The brown jersey glove features 

knit wrists and is available in men’s and ladies sizes. 


MSG1400P 

Standard weight, brown color jersey gloves, clute cut, knit wrist L DZ $7.07 

MSG1402 

Standard weight, brown color jersey gloves, clute cut, knit wrist Ladies DZ $6.98 

MSG1410C 

100% cotton, brown color jersey gloves, clute cut, knit wrist L DZ $8.53 

MSG1430 

Extra Heavy weight, brown color jersey gloves, clute cut, knit wrist L DZ $10.27 

C 

C. PVC Dotted Brown Jersey Gloves 

B 

High quality, jersey gloves feature PVC dotted palms for added protection and increased gripping. 

This soft brown glove is clute cut with knit wrists. 


MSG1500 

PVC Dotted brown jersey gloves, clute cut, knit wrist L DZ $10.27 

MSG1502 

PVC Dotted brown jersey gloves, clute cut, knit wrist Ladies DZ $10.07 

MSG1510 

Micro PVC dotted brown jersey gloves, clute cut, knit wrist L DZ $10.62 

MSG1512 

Micro PVC dotted brown jersey gloves, clute cut, knit wrist Ladies DZ $10.45 

MSG1500 

D 

D. Heavy Weight Light Blue Jersey Gloves 

Heavy weight light blue jersey, knit wrist glove that is clute cut. 


MSG1450 

Heavy weight light blue jersey L DZ $13.43 

MSG14503 Heavy weight light blue jersey Ladies DZ $12.88 

E 

E. Red Fleece Lined Brown Jersey Gloves 

Brown jersey gloves made of 8 oz. jersey material with knit wrist. Gunn cut with red fleece liner 

and straight thumb. 


MSG1600 

Red Fleece lined, brown jersey gloves, slip-on cuff L DZ $14.23 

124 


String Knit 


A. Gray Poly/Cotton String Knit Gloves 

Uncoated string knit gloves feature 60% cotton/40% polyester fiber content. Used in general 

maintenance and other dry jobs. Glove is reversible. 


MSG3415G Standard weight, gray color, string knit gloves S-L DZ $4.12 

MSG3185GS Heavy weight, gray color, string knit gloves S DZ $6.27 

MSG3185GL Heavy weight, gray color, string knit gloves L DZ $6.27 

A 

C. String Knit Gloves with PVC Dots on 2 Sides 

B 

B. Multi-Purpose String Knit Gloves 

7 Gauge, string knit gloves feature 60% cotton/40% polyester fiber content and are PVC dotted 

on 2 sides. Ideal for general maintenance and other dry jobs. 


MSG3851L 

Economy weight string knit gloves, PVC Dots on 2 sides L DZ $7.27 

MSG3855XL 

Medium weight string knit gloves, PVC Dots on 2 sides XL DZ $10.80 

MSG3855L/P 

Medium weight string knit gloves, PVC Dots on 2 sides L DZ $8.63 

MSG3855S/P 

Medium weight string knit gloves, PVC Dots on 2 sides S DZ $8.63 

Multi-Purpose string knit gloves, natural color in standard, economy or medium weight. These 

gloves come in either a cotton/poly blend or you can get them made of 100% cotton. Provides 

comfort and warmth and allows manual dexterity. 


MSG3400 

Medium weight, natural color, poly/cotton string knit gloves S-L DZ $5.35 

MSG3400XL Medium weight, natural color, poly/cotton string knit gloves XL DZ $5.35 

MSG3410 

Standard weight, natural color, poly/cotton string knit gloves S-L DZ $4.38 

MSG3411S Economy weight, natural color, poly/cotton string knit gloves S DZ $4.03 

MSG3411L Economy weight, natural color, poly/cotton string knit gloves L DZ $4.03 

MSG3435 

Medium weight, natural color, 100% cotton string knit gloves S-L DZ $5.82 

C 


D 

D. String Knit Gloves with PVC Dots on 1 Side 

PVC dotted on one side, string knit gloves. Made from a cotton/polyester blend. Perfect for 

when a good grip is a must. 


MSG3801S Economy weight, natural color, poly/cotton string knit gloves, PVC Dots,1 side S DZ $6.07 

MSG3801L Economy weight, natural color, poly/cotton string knit gloves, PVC Dots,1 side L DZ $6.07 

MSG3805S Standard weight, natural color, poly/cotton string knit gloves, PVC Dots, 1 side S DZ $8.88 

MSG3805L Standard weight, natural color, poly/cotton string knit gloves, PVC Dots, 1 side L DZ $8.88 

E. Thermal Liner Gloves 

Insulating Liner Glove. Unique glove is manufactured with special fibers to trap warm air near 

the skin while wicking moisture away. It can be used as a liner or on it’s own. Machine washable 

and shrink-resistant. 

SKU Description UOM Price 

MSGFBC3730 White Thermostat® Liner DZ $27.77 

MSGFBC3830 Blue Thermostat® Liner DZ $31.22 

MSGH3677 Black Thermal Liner, Acrylic/Spandex DZ $15.05 

E 



Palm Coated 

A 

A. CONTACT High Dexterity, Nylon, Latex Dipped Gloves 

This 13-gauge, high dexterity, green nylon shell with black foam latex coated glove can be 

used in applications such as assembly, handling pipes and furniture manufacturing. Safe for 

food contact. 


MSG3991 

CONTACT green with black foam latex S-L DZ $26.95 

MSG3991XL CONTACT green with black foam latex XL DZ $26.95 


B. CHARGER High Dexterity, Poly/Cotton, Latex Dipped Gloves 

This 10-gauge, high dexterity, green cotton/poly shell with black foam latex coated glove can 

be used in applications such wire/cable industry, durable goods assembly, and freight handling. 

Safe for food contact. 


MSG3995 

CHARGER green with black foam latex S-L DZ $21.97 

MSG3995XL CHARGER green with black foam latex XL DZ $21.97 

C 

C. COLD SNAP High Dexterity, Thermal, Latex Coated Gloves 

This 7-gauge, high dexterity, green loop-in, brushed acrylic terry shell with black foam latex 

coated palm glove can be used in applications such commercial fishing, cold storage and 

construction. Safe for food contact. 


MSG3999 

Cold Snap green with black foam latex S-L DZ $47.55 

MSG3999XL Cold Snap green with black foam latex XL DZ $47.55 

B 

D. Latex Dipped Work Gloves 

Cor-Grip II is a standard, gray 10-gauge glove with a poly/cotton shell and with a gray crinkle 

finish latex coating. Made with FDA accepted materials for food processing applications. 


MSG3895 

10 gauge poly/cotton shell, textured latex palm coating S-L DZ $20.60 

MSG3895XL 

10 gauge poly/cotton shell, textured latex palm coating XL DZ $20.60 

D 

E 

E. Premium Blue Latex Dipped Gloves 

CorGrip ® premium blue latex palm coated string knit gloves with a gray color shell. Made of 

10 gauge, gray knit. 


MSG3896 

10 gauge poly/cotton shell, textured latex palm coating S-L DZ $22.40 

MSG3896XL 

10 gauge poly/cotton shell, textured latex palm coating XL DZ $22.40 

126 


Palm Coated 


A. String Knit Gloves with Blue Latex Palms 

Blue latex palm coated gloves are standard weight and have a natural colored string knit shell. 


MSG3893 

String knit gloves with blue latex palms S-L DZ $10.62 

MSG3893XL String knit gloves with blue latex palms XL DZ $10.62 

A 

B 

B. String Knit Gloves with Green Latex Palms 

10 gauge economy string knit gloves with latex coated palms. 


MSG3892 

String knit gloves with green latex palms S-L DZ $10.62 

MSG3892XL String knit gloves with green latex palms XL DZ $10.62 

C 


C. PVC Palm Coated String Knit Gloves 

Regular weight, natural color string knit gloves. PVC palm coated on one side. Provides abrasion 

resistance. 


MSG3870S PVC Palm coated, string knit gloves S DZ $10.07 

MSG3870L PVC Palm coated, string knit gloves L DZ $10.07 

D 

D. Smitty ® Gloves 

All-around tough glove that can reduce the number of different gloves that you keep on hand. 

Nitrile coating on the palm gives a sure grip on many applications. The coating extends the life 

of the glove. A precision blended knit of cotton and acrylic means coolness and comfort for 

the wearer. 


NRG81/1132M String knit nitrile coated gloves L DZ $27.90 



Palm Coated 

A 

A. ActivGrip Advance by TOWA 

The ActivGrip Advance has a 13 gauge, gray nylon shell, with a black MicroFinish® nitrile 

palm coating. 


MSGAG581 

ActivGrip gray nylon shell, black nitrile palm coating S-L DZ $43.12 

MSGAG581XL 

ActivGrip gray nylon shell, black nitrile palm coating XL DZ $43.12 

B 


B. Cor-Touch Nylon Gloves with Nitrile Palms 

The Cor-Touch gloves are available in white or gray, 13-gauge, polyester shell with gray or 

black, flat nitrile palm coating. They are made with FDA accepted materials for food contact 

applications. 


MSG6890 

Nylon gloves white color shell with gray nitrile palms S-L DZ $16.43 

MSG6890XL Nylon gloves white color shell with gray nitrile palms XL DZ $16.05 

MSG6890G Nylon gloves gray color shell with black nitrile palms S-L DZ $16.43 

MSG6890GXL Nylon gloves gray color shell with black nitrile palms XL DZ $16.43 

C 

C. Cor-Touch II Polyester Gloves with Nitrile Palms 

The Cor-Touch II gloves are gray, 13-gauge, polyester shell with gray, flat nitrile palm coating. 

They are made with FDA accepted materials for food contact applications. 


MSG6892 

Polyester gloves gray color shell with gray nitrile palms S-L DZ $12.43 

MSG6892XL 

Polyester gloves gray color shell with gray nitrile palms XL DZ $12.43 

D. Cor-Touch Foam Nylon Gloves with Nitrile Coating 

The Cor-Touch Foam gloves are available gray, 13-gauge, nylon shell with black, foam nitrile 

coating. They are made with FDA accepted materials for food contact applications. 


MSG6893 

Nylon gloves gray color shell with black foam nitrile coating S-L DZ $26.85 

MSG6893XL Nylon gloves gray color shell with black foam nitrile coating XL DZ $26.85 

D 

128 


Palm Coated 


A 

A. Cor-Touch Foam II Nylon Gloves with Nitrile Coating 

The Cor-Touch Foam gloves are available white, 13-gauge, nylon shell with gray, foam nitrile 

coating. They are made with FDA accepted materials for food contact applications. 


MSG6891 

Nylon gloves white color shell with gray foam nitrile coating S-L DZ $17.52 

MSG6891XL Nylon gloves white color shell with gray foam nitrile coating XL DZ $17.52 

B 

C. Cor-Touch Foam Plus 

The Cor-Touch Foam Plus Glove has a black 13-gauge nylon shell with a black 3/4 micro-foam 

nitrile coating. 


MSG6897 

Black nylon shell with black ¾ micro-foam nitrile S-L DZ $30.48 

MSG6897XL Black nylon shell with black ¾ micro-foam nitrile XL DZ $30.48 

B. Glove Black Nylon/Spandex Shell 3/4 Back Nitrile With Dots 

COR-TOUCH Xtra black nylon/spandex shell, 3/4 back black foam nitrile coating, black nitrile 

dots. 


MSG6899 

Glove black nylon/spandex shell 3/4 back nitrile with dots XS-L DZ $46.50 

MSG6899XL 

Glove black nylon/spandex shell 3/4 back nitrile with dots XL DZ $46.50 

MSG68992X 

Glove black nylon/spandex shell 3/4 back nitrile with dots 2X DZ $46.50 

C 


D 

D. Glove Gray Nylon Shell With Black Nitrile Foam 3/4 Back 

Black micro foam palm coat 15 gauge gray nylon liner. This glove features 3/4 coating offers 

more protection, micro foam nitrile offers great grip, provides outstanding flexibility and comfort, 

high dexterity, coating draws oil and water aside to allow for enhanced grip, good abrasion 

resistance and silicone free and antibacterial. 


WCHE715SNK 

Glove Gray Nylon, Coated Black Nitrile Foam 3/4 Palm Coated L-XL DZ $42.42 

E. Glove Gray Nylon Shell With Black Nitrile Foam Palm 

Black micro nitrile foam palm coat 15 gauge gray nylon liner. This glove features a palm coating 

that offers better breathability, provides outstanding flexibility and comfort, high dexterity, 

coating draws oil and water aside to allow for enhanced grip, good abrasion resistance and 

silicone free and antibacterial. 


WCHE715SNP Glove Gray Nylon, Coated Black Nitrile Foam Palm Coated S-2X DZ $39.25 

E 



Palm Coated 

A 

A. HyFlex ® 11-830 Light Duty Nitrile Coated Knit Glove 

Improved ergonomic design with exceptional comfort, Ansell’s Patented Zonz Knit Advanced 

Comfort Technology provides improved fit and comfort by releasing tension in the high stress 

zones of the glove, decreasing worker hand fatigue. Enhanced Cuff Overedging (ECO) allows 

for easier donning and doffing. Increased comfort and fit drive product acceptance and compliance 

and extensive size range protects more workers. The new metallic nitrile foam coating 

has a distinctive modern look for fast identification, while the new foam coating compound 

provides increased wear life. Provides sure grip in dry or light oil environments ANSI/ISEA 105 

- Cut Level 1, EN 388 - Cut Level 1 


ANS11-830 HyFlex light duty nitrile 6-11 DZ $40.82 


B. HyFlex ® 11-920 Glove with Ansell Grip Technology 

In oily, slippery conditions, the HyFlex® 11-920 glove provides optimal control along with 

durable protection. Our patent-pending Ansell Grip Technology coating channels fluid away 

from the glove’s surface, enabling workers to effectively grip wet or moderately oily objects 

with less force. The blue nitrile coating provides high abrasion resistance and prevents oil penetration, 

reducing the risk of dermatitis and liquid exposure. Ultimately, hand fatigue is reduced 

for increased comfort and productivity. ANSI/ISEA 105 - Cut Level 1, EN 388 - Cut Level 1 


ANS11-920 HyFlex blue nitrile 6-11 DZ $49.48 

C 

C. HyFlex ® 11-801 Glove Black Foam Nitrile Glove 

B 

Offering the same outstanding light oil grip as HyFlex Foam 11-800, the new HyFlex Foam 

11-801 provides exceptional comfort using Ansell’s patented Knitted Variable Stitch Design. 

Its foam nitrile coating reduces hand fatigue and promotes maximum dexterity, while its gray 

colored knit liner stays clean longer, making these gloves more industrial friendly. ANSI/ISEA 

105 - Cut Level 1, EN 388 - Cut Level 1 


ANS11-801 HyFlex foamed nitrile 6-11 DZ $52.98 

D. HyFlex ® 11-800 Gray Foam Nitrile Glove 

D 

Knit-lined, dipped, color-coded cuff HyFlex foam glove provides your workers with the highest 

level of comfort and protection. The foam coating is resistant to snags and abrasions, and 

it provides excellent grip in light oil applications by channelling the oil away from the glove 

surface. Ideal for automotive assembly and small parts handling. ANSI/ISEA 105 - Cut Level 

1, EN 388 - Cut Level 1 


ANS11-800 HyFlex glove 6-11 DZ $52.98 

E 

E. HyFlex ® 11-600 Lite Glove 

Where dexterity is the key factor, light duty, coated, multi-purpose, palm coated , white polyurethane, 

knitwrist, safety without sacrificing performance. ANSI/ISEA 105 - Cut Level 1, EN 388 - Cut Level 1 


ANS11-600 

HyFlex Lite fine 6-11 DZ $32.58 

130 


Palm Coated 


A 

A. Cor-Touch Lite White 

15 gauge, seamless nylon glove with white color shell and white polyurethane palm coat. 


MSG6895 

White nylon gloves with white polyurethane palms XS-L DZ $17.87 

MSG6895XL White nylon gloves with white polyurethane palms XL DZ $17.87 

MSG6895XXL White nylon gloves with white polyurethane palms 2X DZ $17.87 

B 

B. Cor-Touch Lite Gray 

15 gauge, seamless nylon glove with gray color shell and gray polyurethane palm coat. 


MSG6895G 

Gray nylon gloves with gray polyurethane palms S-L DZ $19.60 

MSG6895GXL 

Gray nylon gloves with gray polyurethane palms XL DZ $19.60 


C. Standard Nylon Shell with Polyurethane Coating 

13-gauge, seamless nylon glove with black color shell and gray polyurethane palm coat. 


MSG6896C Black nylon gloves with black polyurethane palms S-L DZ $12.43 

MSG6896CXL Black nylon gloves with black polyurethane palms XL DZ $12.43 

C 

D 

D. Cor-Brite High Visibility String Polyurethane Coated Palms 

The Cor-Brite is constructed of a 13-gauge, high visibility lime green polyester shell with a high 

visibility orange polyurethane palm coating. 


MSG6901 String knit glove high-vis lime with high vis orange polyurethane palms XS-L DZ $21.39 

MSG6901XL String knit glove high-vis lime with high vis orange polyurethane palms XL DZ $16.05 

MSG69012X String knit glove high-vis lime with high vis orange polyurethane palms 2X DZ $16.05 



Cut Resistant 

Cut Resistance Guide 

Terms and Definitions 

ANSI/ISEA 105 - American National Standard for Hand Protection: Voluntary US standard for gloves. 

ASTM F1790 - Test method specified under ANSI/ISEA 105 to measure cut resistance. 

CPPT - Cut Protection Performance Test: Test machinery used to perform ASTM F1790. A test sample is cut by a straight edge 

blade, under load, that moves along a straight path. The sample is cut five times each at three different loads and the data is 

used to determine the required load to cut through the sample at a reference distance of 20 mm. (0.8 inches). This is referred 

to as the Rating Force or Cutting Force. The higher the Rating Force, the more cut resistant the material. Cut resistance is 

measured in grams and converted to levels. 


CE - Committee de European 

EN 388 - Set of CE Test Standards for Mechanical Hazards: Abrasion Resistance, Blade Cut Resistance, Tear Resistance and 

Puncture Resistance. 

Couptest Tester - Machinery used to determine cut resistance under CE/EN 388. A circular blade, under a fixed load, moves 

back and forth across the sample until cut-through is achieved. A cotton canvas fabric is used as the reference material. The 

reference material and test sample are cut alternatively until at least five results are obtained. The cut resistance is a ration 

of the number of cycles needed to cut through the test sample vs. the reference material. This is referred to as the cut index. 

The higher the cut index, the more cut resistant the material. The cut index is converted to levels. 

Cordova Glove Cut Resistance Information Tables 

Glove SKU # Description ASTM F1790 (CPPT) CE/EN 388 Page # 

MSG3757 Monarch Split Leather Palm Cut Level 4 Cut Level 5 138 

MSG3750 Monarch White Polyurethane Palm Coating Cut Level 3 Cut Level 5 138 

MSG3752 Monarch Black Polyurethane Palm Coating Cut Level 3 Cut Level 5 138 

MSG3755 Monarch Black HCT-Nitrile Coating Cut Level 3 Cut Level 5 138 

MSG3758 Monarch Black Crinkle Latex Coating Cut Level 3 Cut Level 5 138 

MSG3070 100% Kevlar® String Knit Gloves Cut Level 3 N/A 137 

MSG3075 100% Kevlar® PVC Dotted String Knit Gloves Cut Level 3 N/A 137 

MSG3050 Kevlar® Gloves with Latex Palms Cut Level 3 Cut Level 4 136 

MSG3060 Kevlar®/Cotton String Knit Gloves Cut Level 2 N/A 137 

MSG3065 Kevlar®/Cotton PVC Dotted String Knit Gloves Cut Level 2 N/A 137 

MSG3760 Premium Dyneema® Cut Resistant Gloves Cut Level 2 Cut Level 3 139 

MSG3055 Kevlar® Gloves with Nitrile Palms Cut Level 2 Cut Level 2 136 

MSG3710 White Dyneema® Shell/Polyurethane Standard Cut Level 1 Cut Level 3 139 

MSG3710G Gray Dyneema® Shell/Polyurethane Standard Cut Level 1 Cut Level 3 139 

MSG3700 White Dyneema® Shell/Polyurethane Premium Cut Level 1 Cut Level 3 139 

MSG3700G Gray Dyneema® Shell/Polyurethane Premium Cut Level 1 Cut Level 4 139 

132 


Cut Resistant 


Cut Resistance Guide 

Ansell Glove Cut Resistance Information Tables 

Glove SKU # Description ANSI/ISEA 105 EN 388 Page # 

GNSPBS301X Polar Bear ® Supreme Heavy Duty Gloves Cut Level 5 Cut Level 5 139 

ANS11-501 HyFlex ® 11-501 CR+ Cut Level 4 Cut Level 4 134 

ANS11-511 HyFlex ® 11-511 Intercept Technology ® with Kevlar ® Cut Level 4 Cut Level 4 134 

ANS97-505 Ansell 97-505 Construction Cut Protection Glove Cut Level 4 N/A 135 

ANS80-813 PowerFlex® 80-813 Flame Resistant & Cut Protection Cut Level 4 Cut Level 5 135 

ANS70-765 Ansell 70-765 Leather Palm Cut Protection Glove Cut Level 4 Cut Level 4 135 

ANS11-500 HyFlex ® 11-500 CR Cut Level 2 Cut Level 2 134 

ANS11-510 HyFlex ® 11-510 DuPont Kevlar ® Stretch Liner Cut Level 2 Cut Level 3 134 

ANS11-624 HyFlex ® 11-624 Dyneema Cut Level 2 Cut Level 3 135 

Wells Lamont Glove Cut Resistance Information Tables 

Glove SKU # Description ASTM F1790 (CPPT) CE/EN 388 Page # 

WHZ13452X The Whizard ® Silver Talon ® Standard Cut Level 5 N/A 140 

WHZ1347XX The Whizard ® Silver Talon ® Master Grip Cut Level 5 N/A 140 

WHZ33302X The Whizard ® Handguard ® II White Cut Level 5 N/A 140 

WHZ13485X The Whizard ® Handguard ® II Gray Cut Level 5 N/A 140 

WHZ133XXX The Whizard ® Heavy Duty Slipguard ® Cut Level 5 N/A 140 




Cut Resistant 

A 

A. HyFlex ® 11-500 CR with Kevlar ® Clove 

HyFlex® CR has a cut-resistant stretch Kevlar® liner; is coated with unique, foam nitrile; 

and is an excellent choice when working with sharp-edged materials and tools. The stretch 

Kevlar® lining provides a comfortable fit with excellent protection from nuisance nicks and 

abrasion and the extended cuff offers extra cut protection around the wrist. The foam nitrile 

coating channels away oil from the surface of the gloves, providing a sure grip in light oil 

applications and features a soil-hiding black palm coating. ANSI/ISEA 105 - Cut Level 2, EN 

388 - Cut Level 2 


ANS11-500 

HyFlex CR with Kevlar Glove 6-11 DZ $74.43 


B. HyFlex ® 11-501 CR+ Intercept Technology Glove 

Featuring Intercept Technology, jointly developed by Ansell and DuPont, this yarn incorporates 

Kevlar® Stretch Armor Technology for an unprecedented combination of superior cut resistance 

and outstanding dexterity. Superior HyFlex oil grip, tactile sensitivity, dexterity and comfort. 

Cut prevention improves productivity, profitability and employee morale. ANSI/ISEA 105 

- Cut Level 4, EN 388 - Cut Level 4 


ANS11501-7 HyFlex CR+ intercept technology 7 DZ $169.00 





B 

C 

C. HyFlex ® 11-510 DuPont Kevlar ® Stretch Liner With Spandex 

The Ansell 11-510 DuPont Kevlar® stretch liner with spandex glove features a patented 

Nylon and Kevlar® zonal plaiting on palm and back. To give the wearer a soft feel it also incorporates 

the ComfortFlex cuff. The black foam nitrile coated palm provides enhanced grip in 

light oil conditions and is silicone-free and latex-free for worker and product protection. ANSI/ 

ISEA 105 - Cut Level 2, EN 388 - Cut Level 3 


ANS11-510 

HyFlex DuPont Kevlar stretch liner with spandex 6-11 DZ $81.85 

D. HyFlex ® 11-511 Intercept Technology® with DuPont Kevlar ® 

Ansell’s exclusive Intercept Technology® with DuPont Kevlar® Stretch Armor. ANSI cut level 

4 reduces the risk of injury and related expenses. Offers a redesigned finger length for greater 

dexterity, comfort, wear and flexibility. Enhanced Cuff Overedging (ECO) utilizes new yarn 

technology and increased elasticity in cuff area. The new proprietary green foam nitrile coating 

provides workers with the ability to handle sharp parts and knives with confidence in light 

oil or dry applications. New coating formulation provides longer wear and is silicone-free and 

latex-free for worker and product protection. ANSI/ISEA 105 - Cut Level 4, EN 388 - Cut Level 4 


ANS11-511 HyFlex DuPont Kevlar stretch liner with spandex 7-11 DZ $194.85 

D 

134 


Cut Resistant 


A. HyFlex ® 11-624 Dyneema Glove 

A 

HyFlex® 11-624 gloves feature an exclusive yarn combination of DSM Dyneema®, Spandex 

and nylon. HyFlex® 11-624 gloves offer the highest degree of cut protection, yet they are 

lightweight, cool, comfortable and highly flexible. A polyurethane black coating provides a 

medium high level of abrasion resistance while promoting a sure-grip in dry and wet applications 

and extending product life by not showing strains from wear. ANSI/ISEA 105 - Cut Level 

2, EN 388 - Cut Level 3 


ANS11-624 HyFlex Dyneema 6-11 DZ $101.00 

FR Cut Level 4 

B 

B. PowerFlex ® 80-813 Flame Resistant & Cut Protection Glove 

The first glove to combine high levels of flame resistance, arc flash and cut protection in one 

comfortable, ergonomically designed product. The PowerFlex® 80-813 gloves provide exceptional 

protection for workers with EN 407 Level 4 resistance to flammability, Arc Hazard Level 

1 and ANSI Level 4 Cut Protection. The exclusive composite yarn in the PowerFlex® 80-813 

has a glass fiber core that provides a high level of cut protection while dissipating electrostatic 

charges. All components of the glove are inherently flame resistant, not chemically applied, 

therefore maintaining their protective properties throughout the life of the product—even after 

multiple launderings. All of this protection is in a glove so comfortable, workers will want to 

wear it all day. ANSI/ISEA 105 - Cut Level 4, EN 388 - Cut Level 5 


ANS80-813 PowerFlex flame resistance, arc flash cut protection glove 7-11 DZ $203.32 


C. Ansell 97-505 Construction Cut Protection Glove 

This premium glove has at least 8 times more cut protection than most popular leather and 

construction gloves. Featuring Stretch Armor Yarn – a unique combination of DuPont 

Kevlar® and Ansell Intercept Technology® and a foam nitrile coating delivers great wear and 

grip. Designed to deliver comfort, bare hand dexterity and excellent cut resistance. ANSI/ISEA 

105 - Cut Level 4 


ANS97-505 Construction cut protection glove 8-10 PR $18.97 

C 

D 

D. Ansell 70-765 Leather Palm Cut Protection Glove 

Advanced cut protection combined with premium leather for superior grip. Durable leather pad 

double-stitched with DuPont Kevlar® fiber to ensure superior grip and protection against 

sharp snags and punctures. Engineered yarns provide high cut protection-to-weight ratio. Tengauge, 

medium weight cut resistant yarn and reinforced thumb crotch. Protection all the way to 

the fingertips. Protects hands from intermittent heat contact up to 200ºF. ANSI/ISEA 105 - Cut 

Level 4, EN 388 - Cut Level 4 


ANS70-765 Construction high performance string knit gloves with leather palm 8-11 DZ $199.18 



Cut Resistant 

A 

A. Kevlar ® Gloves with Nitrile Palms 

Kevlar/lycra string knit gloves with foam nitrile coated palms. ASTM F1790 (CPPT) - Cut Level 

2, CE/EN 388 - Cut Level 2 


MSG3055 

Kevlar/lycra string knit gloves, nitrile palm coated S-L DZ $71.40 

MSG3055XL Kevlar/lycra string knit gloves, nitrile palm coated XL DZ $71.40 


B. Power-Cor Latex Palm Coated Kevlar ® Gloves 

Kevlar® string knit gloves with premium latex coated palms. ASTM F1790 (CPPT) - Cut Level 

3, CE/EN 388 - Cut Level 4 


MSG3050 

100% Kevlar String knit gloves, crinkle finish latex palm coated S-L DZ $96.55 

MSG3050XL 100% Kevlar String knit gloves, crinkle finish latex palm coated XL DZ $96.55 

B 

C 

C. Leather Palm Kevlar ® Gloves 

100% Kevlar, 7-Gauge shell with premium side split leather palm. 


MSG3090L 

100% Kevlar shell, premium side split leather palm L DZ $131.13 

MSG3090XL 

100% Kevlar shell, premium side split leather palm XL DZ $131.13 

MSG3095L 

Economy plaited Kevlar/Cotton Shell with Shoulder Leather Palm L DZ $93.37 

! 

WEB INFORMATION 

For a full listing and online ordering visit 

our website at: www.gosafe.com 

136 


Cut Resistant 


A. Kevlar ® /Cotton & 100% Kevlar ® String Knit Gloves 

Dupont Kevlar for high tensile strength relative to its weight - up to five times stronger than 

steel. Will not melt, ignite or conduct electricity. High durability in cut resistance. High comfort 

level. Allows manual dexterity. Made with FDA approved materials for use in food processing 

applications. Use as gloves or glove liners. Kevlar outside/cotton Inside. Regular weight. 

The 100% Kevlar cut-resistant, string knit gloves are 7 gauge, medium weight. Gloves are 

reversible. 

MSG3060: ASTM F1790 (CPPT) - Cut Level 2 



MSG3060S Kevlar/cotton gloves S DZ $35.48 

MSG3060L Kevlar/cotton gloves L DZ $35.48 

MSG3070 

100% Kevlar string knit gloves S-L DZ $60.35 

MSG3070XL 100% Kevlar string knit gloves XL DZ $60.35 

A 

B 

B. Kevlar ® /Cotton & 100% Kevlar ® PVC Dotted String Knit Gloves 

Kevlar/cotton and 100% Kevlar string knit gloves are 7 gauge, medium weight and feature PVC 

dotted on two sides. Perfect for protection against sharp slippery surfaces. Gloves are cutresistant 

and reversible. 




MSG3065 

Kevlar/cotton PVC dotted gloves XS-L DZ $41.20 

MSG3065XL Kevlar/cotton PVC dotted gloves XL DZ $41.20 

MSG3075 

100% Kevlar PVC dotted string knit gloves S-L DZ $69.43 

MSG3075XL 100% Kevlar PVC dotted string knit gloves XL DZ $69.43 


C. 100% Kevlar ® Fingerless Gloves 

100% Kevlar cut-resistant, string knit gloves are regular weight. Gloves are reversible. 


MSG3079 

100% Kevlar fingerless gloves S-L DZ $46.74 

C 

D 

D. 100% Kevlar ® PVC Dotted Fingerless String Knit Gloves 

100% Kevlar string knit gloves are 7 gauge, medium weight and feature PVC dotted on 2 sides. 

Gloves are cut resistant and reversible. 


MSG3076 

100% Kevlar PVC dotted fingerless gloves M-L DZ $47.54 

MSG3076XL 100% Kevlar PVC dotted fingerless gloves XL DZ $49.12 



Cut Resistant 

A 

MONARCH 

The MONARCH series features TAEKI 5 fiber, which is a unique engineered 

fiber with remarkable physical properties. Taeki 5 fiber is a strong, 

durable, and cut-resistant multi-filament fiber created by combining Synthetic 

Fibers, Glass Fiber and Spandex. MONARCH gloves made with Taeki 

5 fiber exhibit high degrees of flexibility, comfort and cut protection. All 

MONARCH styles made with Taeki 5 fiber provide CE Cut Level 5 protection. 

A. Monarch White Polyurethane Palm Coating 

White, 13-Gauge Shell, Made with Taeki 5 Fiber, White Polyurethane Palm Coating. ASTM 

F1790 (CPPT) - Cut Level 3, CE/EN 388 - Cut Level 5 


MSG3750 

Monarch white polyurethane palm coating, cut level 5 S-L PR $7.07 

MSG3750XL Monarch white polyurethane palm coating, cut level 5 XL PR $7.07 


B. Monarch Black Polyurethane Palm Coating 

Black, 13-Gauge Shell, Made with Taeki 5 Fiber, Black Polyurethane Palm Coating. ASTM 



MSG3752S Monarch black polyurethane palm coating, cut level 5 S-L PR $8.53 

MSG3752XL Monarch black polyurethane palm coating, cut level 5 XL PR $8.53 

MSG37522X Monarch black polyurethane palm coating, cut level 5 2X PR $8.53 

C 

C. Monarch Black HCT-Nitrile Coating 

B 

Salt & Pepper, 13-Gauge Shell, Made with Taeki 5 Fiber, Black HCT-Nitrile Coating. ASTM 



MSG3755 

Monarch HCT-nitrile coating, cut level 5 S-L PR $9.35 

MSG3755XL Monarch HCT-nitrile coating, cut level 5 XL PR $9.35 

D. Monarch Split Leather Palm 

Salt & Pepper, 10-Gauge Shell, Made with Taeki 5 Fiber with Split Leather Palm. Stitched with 

Kevlar Thread. ASTM F1790 (CPPT) - Cut Level 4, CE/EN 388 - Cut Level 5 


MSG3757 

Monarch split leather palm, cut level 5 S-L PR $13.43 

MSG3757XL Monarch split leather palm, cut level 5 XL PR $13.43 

MSG3757XXL MSG37572X Monarch split leather palm, cut level 5 2X PR $13.43 

D 

E 

E. Monarch Black Crinkle Latex Coating 

Black, 13-Gauge Shell, Made with Taeki 5 Fiber with Black Crinkle Latex Coating. ASTM F1790 

(CPPT) - Cut Level 3, CE/EN 388 - Cut Level 5 


MSG3758 

Monarch NRL-black crinkle latex coating, cut level 5 S-L PR $8.88 

MSG3758XL Monarch NRL-black crinkle latex coating, cut level 5 XL PR $8.88 

138 


Cut Resistant 


A. White Dyneema ® Shell/Polyurethane Palm Coated Gloves 

Cut resistant gloves feature high performance Dyneema fiber, and string knit shell construction 

with polyurethane coated palms.They are more flexible, comfortable and conduct heat and 

moisture better than others. Because Dyneema is unaffected by water or detergents, and is 

highly-resistant to abrasion, these gloves can be washed and re-used without any loss of cut 

resistance. Made with USDA/FDA accepted materials for use in food processing applications. 

MSG3700: ASTM F1790 (CPPT) - Cut Level 1, CE/EN 388 - Cut Level 3 

MSG3710: ASTM F1790 (CPPT) - Cut Level 1, CE/EN 388 - Cut Level 3 


MSG3700 

Dyneema shell/polyurethane coated, premium cut resistant S-L PR $9.53 

MSG3700XL Dyneema shell/polyurethane coated, premium cut resistant XL PR $9.53 

MSG37002X Dyneema shell/polyurethane coated, premium cut resistant 2X PR $9.53 

MSG3710 

Dyneema shell/polyurethane coated, standard cut resistant S-L PR $8.53 

MSG3710XL Dyneema shell/polyurethane coated, standard cut resistant XL PR $8.53 

B 

B. Gray Dyneema ® Shell/Polyurethane Palm Coated Gloves 

A 

MSG3700G: ASTM F1790 (CPPT) - Cut Level 1, CE/EN 388 - Cut Level 4 

MSG3710G: ASTM F1790 (CPPT) - Cut Level 1, CE/EN 388 - Cut Level 3 


MSG3700G Dyneema shell/polyurethane coated, premium cut resistant XS-L PR $10.45 

MSG3700GXL Dyneema shell/polyurethane coated, premium cut resistant XL PR $10.45 

MSG3700G2X Dyneema shell/polyurethane coated, premium cut resistant 2X PR $10.45 

MSG3710G Dyneema shell/polyurethane coated, standard cut resistant S-L PR $8.53 

MSG3710GM MSG3710GXL Dyneema shell/polyurethane coated, standard cut resistant XL PR $8.53 


C 

C. Premium Dyneema ® Cut Resistant Gloves 

Premium cut resistant gloves, made with Dyneema® yarn, nitrile palm coated for additional 

abrasion and liquid resistance. ASTM F1790 (CPPT) - Cut Level 2, CE/EN 388 - Cut Level 3 


MSG3760 

Premium cut resistant gloves, Dyneema yarn nitrile palm S-L PR $11.17 

MSG3760XL Premium cut resistant gloves, Dyneema yarn nitrile palm XL PR $11.17 

D 

D. Polar Bear ® Supreme Heavy Duty Gloves 

Made of yarns that contain three strands of stainless steel, this glove is more cost-effective 

than chain mesh designs, yet it still offers an exceptionally high level of protection from cuts. 

It is heavyweight, with no seams to irritate hands. A liner is provided for extra comfort. ANSI/ 

ISEA 105 - Cut Level 5, EN 388 - Cut Level 5 


GNSPBS301 Polar Bear gloves XS-L EA $12.00 

GNSPBS301X Polar Bear gloves XL EA $12.00 



Cut Resistant 

A 

A. The Whizard ® Silver Talon ® Standard 

The Whizard Silver Talon is considered the number one glove within the meat and poultry industries. 

The patented yarn composition combines high strength, high performance materials 

with stainless steel, creating excellent tensile strength and superior cut protection. The Silver 

Talon is also available with a leather palm or urethane grip pattern for applications requiring 

precise gripping capabilities. Features include: High level of comfort and dexterity, outstanding 

wear for a long service life, pre-washed, preshrunk and made in USA. ASTM F1790 (CPPT) 

- Cut Level 5 


WHZ134525 

Silver Talon glove standard grip XS EA $15.10 

WHZ134526 

Silver Talon glove standard grip S EA $15.10 

WHZ134527 

Silver Talon glove standard grip M EA $15.10 

WHZ134528 

Silver Talon glove standard grip L EA $15.10 

WHZ134529 

Silver Talon glove standard grip XL EA $15.10 


B. The Whizard ® Silver Talon ® Master Grip 

SKU Description Hand Size UOM Price 

WHZ134769 Silver Talon glove Master Grip Left S EA $25.88 

WHZ134770 Silver Talon glove Master Grip Right S EA $25.88 

WHZ134772 Silver Talon glove Master Grip Left M EA $25.88 

WHZ134773 Silver Talon glove Master Grip Right M EA $25.88 

WHZ134775 Silver Talon glove Master Grip Left L EA $25.88 

WHZ134776 Silver Talon glove Master Grip Right L EA $25.88 

WHZ134778 Silver Talon glove Master Grip Left XL EA $25.88 

WHZ134779 Silver Talon glove Master Grip Right XL EA $25.88 

B 

C 

C. The Whizard ® Handguard ® II 

The Whizard Handguard II is the original heavy duty, cut resistant glove. Handguard II uses a 

unique combination of ultra-high-strength Spectra®, Vectran® and stainless steel to provide 

the ultimate in hand protection against cuts and slashes. Ideal for meat, poultry and seafood 

processing, material handling and deli slicer cleaning. No other glove offers this level of protection! 

Features include: 3” cuff for extra protection, outstanding wear for a long service life, 

prewashed, preshrunk and made in USA. ASTM F1790 (CPPT) - Cut Level 5 


WHZ333021 

Handguard II, heavy duty, cut resistant glove, white S EA $18.90 

WHZ333023 

Handguard II, heavy duty, cut resistant glove, white M EA $18.90 

WHZ333025 

Handguard II, heavy duty, cut resistant glove, white L EA $18.90 

WHZ333027 

Handguard II, heavy duty, cut resistant glove, white XL EA $18.90 

WHZ134853 

Handguard II, heavy duty, cut resistant glove, gray S EA $18.90 

WHZ134854 

Handguard II, heavy duty, cut resistant glove, gray M EA $18.90 

WHZ134855 

Handguard II, heavy duty, cut resistant glove, gray L EA $18.90 

WHZ134856 

Handguard II, heavy duty, cut resistant glove, gray XL EA $18.90 

D. The Whizard ® Heavy Duty Slipguard ® 

The Whizard Heavy Duty Slipguard combines heavy duty cut protection and slip resistance. 

Based on the Handguard® II construction, Heavy Duty Slipguard uses a unique combination of 

ultra-high-strength fibers and stainless steel to provide the ultimate in hand protection against 

cuts and slashes. The polyurethane grip pattern provides a no-slip grip. Ideal for use with 

glass, metal, knives or other sharp, slippery surfaces. Features include: outstanding wear for a 

long service life, prewashed, preshrunk and made in USA. ASTM F1790 (CPPT) - Cut Level 5 

SKU Description Hand Size UOM Price 

WHZ133791 Heavy Duty Slipguard Left S EA $25.28 

WHZ133792 Heavy Duty Slipguard Right S EA $25.28 

WHZ133795 Heavy Duty Slipguard Left M EA $25.28 

WHZ133796 Heavy Duty Slipguard Right M EA $25.28 

WHZ133799 Heavy Duty Slipguard Left L EA $25.28 

WHZ133800 Heavy Duty Slipguard Right L EA $25.28 

WHZ133803 Heavy Duty Slipguard Left XL EA $25.28 

WHZ133804 Heavy Duty Slipguard Right XL EA $25.28 

140 

Web: www.gosafe.com • Phone: (800)330-9240 • Fax: (281)476-5394 

D

Performance 


A. Chrome Series: Cut Level 5 Impact Hi-Vis 

Over 25 times the cut resistance of the mechanics’ gloves you’re wearing right now, and over 

10 times the cut resistance of Kevlar®! Sound crazy? Not with the Chrome Series from 

HexArmor. We’ve invested millions of dollars perfecting technology and PPE designs to shatter 

current ratings for cut and abrasion resistance. It’s time to ditch the flashy, non-protective 

mechanics’ gloves, and upgrade to the Chrome Series. 


HEX4026 

Chrome Series glove hi-viz green cut level 5 impact S-L PR $38.18 

HEX4026XL 

Chrome Series glove hi-viz green cut level 5 impact XL PR $38.18 

HEX40262X 

Chrome Series glove hi-viz green cut level 5 impact 2X PR $45.80 

HEX40263X 

Chrome Series glove hi-viz green cut level 5 impact 3X PR $45.80 

A 

TrueShield Performance Area - ISEA CUT: 5 

Coretek Performance Fiber - ISEA CUT: 1 

B 

B. NXT 10-301 

HexArmor Protection Zone - ISEA CUT:5 CE 4542 

Impact Protection 

NXT Series is the first product line to utilize the TruShield® Performance, a ground-breaking 

armor platform that obliterates current recognized industry standards for cut, puncture, and 

abrasion–resistance. Developed for use in applications such as utility knives or other cutting 

instruments, materials handling, Flexible packaging, or box cutting applications, the NXT 10- 

301 protects from mechanical hazards like no other product on the market. NXT products take 

high dexterity gloves to another level of comfort, feel, and high performance protection that 

other products cannot match. TrueShield Plated Performance Area Cut Level 5, Coretek 

Unplated Performance Fiber Cut Level 1. 


HEX10-301 NXT Trueshield gloves palm cut level 5 S-L PR $24.03 

HEX10-301XL NXT Trueshield gloves palm cut level 5 XL PR $24.03 

HEX10-3012X NXT Trueshield gloves palm cut level 5 2X PR $28.85 


C. Level Six Nitrile Palm Coated 

Level Six Series gloves set the new standard for hand protection by combining industrial puncture 

protection with industry leading cut resistance. HexArmor® products are engineered to 

provide the highest levels of protection in areas where risk is the greatest. Experience the 

Science of Safety that has helped reduce injuries and lower PPE costs in the harshest work 

environments. Made with SuperFabric® brand material for the highest cut–resistance available 

on the market- Exceeds ISEA/CE Level 5 (in noted enhanced areas). Cut-resistant HPPE shell 

with flat nitrile palm coating for great oily or dry grip- ISEA Level 4 


HEX9010 

Level Six glove nitrile palm coated, cut level 5 S-L PR $26.13 

HEX9010XL Level Six glove nitrile palm coated, cut level 5 XL PR $26.13 

HEX90102X Level Six glove nitrile palm coated, cut level 5 2X PR $31.37 

C 

HexArmor Protection Zone- ISEA CUT: 5 

HPPE Shell - ISEA CUT: 4 

HeArmor Protection Zone - ISEA CUT: 5 

DuPont Kevlar ® Shell - ISEA CUT: 1 

D 

D. Blademaster Ultimate 

The HexArmor® BladeMaster 8020 combines a knit cut resistant shell with added high cut 

and puncture protection on the palm, fingers, and knuckle area. The palm has leather over cut 

and puncture resistant material, providing excellent grip for oily applications. Gloves are long 

lasting and durable because stitching is not exposed. 


HEX8020 

Blademaster glove leather palm cut level 5 M-L PR $50.78 

HEX8020XL Blademaster glove leather palm cut level 5 XL PR $50.78 

HEX80202X Blademaster glove leather palm cut level 5 2X PR $50.78 



Performance 

A 

A. 4020 GGT5 ® 

Introducing the 4020 GGT5®, the most complete glove for the oil and gas industry. Gator Grip 

Technology® is a design platform that combines high performance materials engineered to 

provide industry-leading cut and puncture protection, and the strongest grip in any oil situation. 


HEX4020 

GGT5 glove green/yellow palm cut level 5 S-L PR $47.13 

HEX4020XL GGT5 glove green/yellow palm cut level 5 XL PR $47.13 

HEX40202X 

GGT5 glove green/yellow palm cut level 5 2X PR $54.22 

HEX40203X 

GGT5 glove green/yellow palm cut level 5 3X PR $54.22 




B. 4021 GGT5 ® Mud 

B 



C 

C. Roughneck KevLoc 

Introducing the 4021 GGT5®, the most complete glove for the oil and gas industry. Mud Grip 

Technology® is a design platform that combines high performance materials engineered to 

provide industry-leading cut and puncture protection, and strong grip in light/medium oil situations. 


HEX4021 

GGT5 Mud Grip glove orange palm cut level 5 S-L PR $50.02 

HEX4021XL GGT5 Mud Grip glove orange palm cut level 5 XL PR $50.02 

HEX40212X GGT5 Mud Grip glove orange palm cut level 5 2X PR $58.02 

HEX40213X GGT5 Mud Grip glove orange palm cut level 5 3X PR $58.02 

The Roughneck KevLoc glove features TPR impact protection on top of hand and full length 

of fingers, high visibility for increased safety, KevLoc grip system on palm & fingers that 

enhances grip, extended neoprene wrist closure with SuperCuff technology and is CE Rated 

4343, Level 3 Cut and Puncture Resistance. 


RGG297- 

Roughneck KevLoc glove, impact protection, cut level 3 8-13 PR $41.81 

D. ProFlex ® 925F(x) Dorsal Impact-Reducing Gloves 

Maximum back-of-hand impact protection meets superior abrasion resistance, dexterity and 

grip. Features include molded TPR armor on knuckles, fingers and carpal bone for impact 

protection, pinch injury prevention, and blow deflection. Armor “flex zones” for high dexterity. 

5 mm EVA dorsal pad protects vulnerable metacarpal region and 5 mm EVA palm and ulnar 

padding protects against “chopping” blows. Abrasion-resistant PVC on palm and 3 fingers 

limits liquid penetration. Non-slip Armortex® reinforcement zones on thumb saddle and index 

finger for enhanced grip and durability. Reinforced Kevlar palm stitching for extended wear and 

durability and reflective accents and hi-vis color scheme for optimal hand visibility. Contoured 

neoprene cuff with reflective pull-on tab resists snagging while offering a secure fit and easy 

on/off. Patent pending 


ERG925F 

Trades dorsal impact gloves S-L PR $36.75 

ERG925FXL 

Trades dorsal impact gloves XL PR $36.00 

ERG925F2X 

Trades dorsal impact gloves 2X PR $36.00 

ERG925WP Trades gloves dorsal impact thinsulate lined S-L PR $47.28 

ERG925WPXL Trades gloves dorsal impact thinsulate lined XL PR $48.02 

ERG925WP2X Trades gloves dorsal impact thinsulate lined 2X PR $48.02 

142 

Web: www.gosafe.com • Phone: (800)330-9240 • Fax: (281)476-5394 

D

Performance 


A. R2 Safety Rigger Glove with Long Neoprene Cuff - Orange 

R2 Safety has 4 way stretch spandex in back of hand, Parity synthetic leather palm with 

Clarino palm and finger patches, TRP knuckle, finger and back of hand protection, extended 

Kevlar® reinforced thumb saddle, Parity synthetic forchettes, oil resistant palm with 

hi vis red silicone pattern for better visibility and grip, ID tag on cuff to place name to protect 

investment, neoprene cuff with spandex for added comfort. 

Features: 

•TPR finger, hand and knuckle guards to protect against bumps & bruises 

•Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar reinforced thumb 

saddle 

•Flexible 4-way stretch form fitting spandex back with Hi Visibility fabric and oil resistant 

palm providing excellent grip in wet applications 


WCHE86712 

R2 safety rigger glove with long neoprene cuff - orange S-L PR $31.35 

WCHE86712XL 

R2 safety rigger glove with long neoprene cuff - orange XL PR $31.35 

WCHE867122X 

R2 safety rigger glove with long neoprene cuff - orange 2X PR $31.35 

WCHE867123X 

R2 safety rigger glove with long neoprene cuff - orange 3X PR $31.35 

B 

A 

B. R2 Safety Rigger Glove with Hook & Loop Elastic Wrist – Orange 

R2 Safety has 4 way stretch spandex in back of hand, Parity synthetic leather palm with 

Clarino palm and finger patches, TRP knuckle, finger and back of hand protection, extended 

Kevlar® reinforced thumb saddle, Parity synthetic forchettes, oil resistant palm with 

hi vis red silicone pattern for better visibility and grip, ID tag on cuff to place name to protect 

investment, neoprene cuff with spandex for added comfort. 

Features: 


•Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar reinforced thumb 

saddle 


palm providing excellent grip in wet applications 


WCHE86713 

R2 safety rigger glove with hook & loop elastic wrist – orange S-L PR $33.70 

WCHE86713XL 

R2 safety rigger glove with hook & loop elastic wrist – orange XL PR $33.70 

WCHE867132X 

R2 safety rigger glove with hook & loop elastic wrist – orange 2X PR $33.70 

WCHE867133X 

R2 safety rigger glove with hook & loop elastic wrist – orange 3X PR $33.70 


C. R2 Winter Fleece Orange 

R2 Winter Glove has 4 way stretch spandex in back of hand, Parity synthetic leather palm 

with Clarinopalm and finger patches, TPR knuckle, finger and back of hand protection, Kevlar® 

reinforced thumb saddle, Parity synthetic forchettes, oil resistant palm with silicone 

pattern that provides excellent grip, fleece lining for warmth, waterproof Enprotex® lining, ID 

tag on cuff to place name to protect investment, neoprene extended safety cuff with spandex 

for added comfort 

Features: 


•Reinforced thermoplastic fingertips to reduce pinches; Kevlar reinforced thumb saddle 


palm providing excellent grip in wet applications, fleece lining with Enprotex® 


WCHE86711 

R2 winter fleece orange M-L PR $42.92 

WCHE86711XL 

R2 winter fleece orange XL PR $42.92 

WCHE867112X 

R2 winter fleece orange 2X PR $42.92 

C 



Performance 

A 

A. ProFlex ® 815 Utility EZ Gloves 

Basic protection, dexterity, and comfort. The Utility EZ has a flair cuff for fast on and off with 

Amara synthetic leather palm and breathable Air-Mesh back. Reinforced fingertips and terry 

thumb brow wipe. 

SKU Description Color Size UOM Price 

ERG815BS 

Utility EZ gloves Black S-L PR $15.42 

ERG815BXL 

Utility EZ gloves Black XL PR $17.10 

ERG815BXXL 

Utility EZ gloves Black 2XL PR $15.42 


B. ProFlex ® 710CR Cut Resistant Trades Glove 

Superb dexterity, function, and protection for the skilled professional. The ProFlex Trades Glove 

710CR are lined with 100% Kevlar ® to provide cut resistance throughout the glove while still 

maintaining superb dexterity and functionality. They feature Akton visco-elastic polymer to 

dampen shock and impact, abrasion resistant, textured PVC on palm and fingers, breathable, 

3-layer stretch spandex with neoprene knuckle pad, synthetic leather palm and fingers, terry 

thumb brow wipe and reinforced fingertips for optimal durability. The regular ProFlex Trades 

Glove are available in a full-finger design and a Touch Control, 3/4-finger on thumb, index, and 

middle fingers design. 


ERG710CR ProFlex® 710CR Cut Resistant Trades Glove, cut level 3 Black S-XL PR $42.02 

ERG710CR2X ProFlex® 710CR Cut Resistant Trades Glove, cut level 3 Black 2X PR $42.02 

ERG710 

ProFlex® Full finger mechanics glove Black S-XL PR $27.92 

ERG710XXL ProFlex® Full finger mechanics glove Black 2X PR $27.92 

ERG720 

ProFlex® Touch control mechanics glove Black S-XL PR $27.07 

ERG720XXL ProFlex® Touch control mechanics glove Black 2X PR $27.07 

B 

C 

C. ProFlex ® 820 PVC Handler Gloves 

ERG710CR 

Textured PVC palm and fingertips for a more secure grip in both wet and dry conditions. The 

ProFlex PVC Handler feature textured PVC palm and fingertips, breathable, 3-layer stretch 

spandex back, low-profile closure with woven elastic cuff, neoprene knuckle pad, terry thumb 

brow wipe and pull tab for easy on and off. 


ERG820 

PVC Handler Gloves Black S PR $22.72 

ERG820XL 

PVC Handler Gloves Black XL PR $23.12 

ERG820XXL 

PVC Handler Gloves Black 2X PR $23.12 

D. ProFlex ® 845 Full-Finger Lightweight Trades Gloves 

Tough PVC palms and single layer spandex. Built to handle rough stuff. The Full-Finger Lightweight 

Trades feature a terry thumb brow wipe, breathable stretch spandex with neoprene 

knuckle pads, abrasion resistant PVC on palm and fingers, low-profile closure with woven 

elastic cuff, pull tab for easy on and off and full-finger with reinforced fingertips. 


ERG845 

Full-Finger Lightweight Trades Black S-L PR $24.09 

ERG845XL 

Full-Finger Lightweight Trades Black XL PR $25.68 

D 

144 


Performance 


A 

A. ProFlex ® 750 At-Heights Construction Gloves 

At-Heights Construction Gloves: Comfort, durability and protection to climb; fit and dexterity to 

do the job once you're up there. Features double layer palm and fingertips: Amara underneath 

revolutionary Rovenica® for unparalleled strength and durability. EVA foam padding on upper 

palm, base and middle digit sections provides comfort for climbing and rope work while maintaining 

superior dexterity at fingertips. Rugged stretch spandex shell for comfort and fit with 

double-needle Kevlar stitching on palm and fingers for extended wear and durability. Perforated 

neoprene knuckle pad and cuff offer breathable protection, convenient pass-through hole on 

cuff for clipping to carabiner. Adjustable wrist cinch anchor for extra security and reflective 

binding allows gloves to be easily located at night. 


ERG750TAN At-Heights construction gloves Black/Tan S-L PR $42.02 

ERG750TANXL 

At-Heights construction gloves Black/Tan XL PR $42.02 

ERG750TAN2X 

At-Heights construction gloves Black/Tan 2X PR $42.02 

B 

B. ProFlex ® 818WP Thermal Waterproof Utility Gloves 

Thermal Waterproof Utility: Tough, sure gripping PVC palm and soft spandex cinch cuff. Features 

Amara synthetic leather with PVC reinforced palm & fingers. 40g 3M Thinsulate Insulation 

and Hipora breathable waterproof & windproof liner. Has a Nylon/Spandex cuff with lowprofile 

closure, breathable spandex back with foam knuckle pad and terry thumb brow wipe. 


ERG818WP Thermal waterproof utility gloves Black S-L PR $37.72 

ERG818WPXL 

Thermal waterproof utility gloves Black XL PR $37.72 

ERG818WPXXL 

Thermal waterproof utility gloves Black 2X PR $37.72 


C 

C. ProFlex ® 9000 Certified Lightweight Anti-Vibration Glove 

Certified Anti-Vibration with Unique chloroprene rubber palm pad combined with lightweight, 

breathable 7-gauge cotton/nylon knit. Features include elastic cuff for secure fit, , re-curved 

design provides comfort, dexterity and flexibility and ANSI S3.40/ISO 10819-1996/EN420/ 

EN388 Certified. 


ERG9000MD ProFlex 9000 Certified Lightweight Anti-Vibration Glove M PR $22.25 

ERG9000LG ProFlex 9000 Certified Lightweight Anti-Vibration Glove L PR $22.25 

ERG9000XL ProFlex 9000 Certified Lightweight Anti-Vibration Glove XL PR $22.25 

D 

D. ProFlex ® 9015 Certified AV Glove With Dorsal Protection 

Certified Anti-Vibration Glove w/ Dorsal Protection offers max impact/vibe protection, plus 

tough dorsal guard. Features include patented Nu2O2® polymer pad, pigskin leather palm and 

fingers, molded TPR for extra protection on back, low-profile closure with woven elastic cuff, 

anti-bacterial treatment and pull-on tab. ANSI S2.73/ISO 10819-1996/EN420 Certified 


ERG9015 

ProFlex 9015 certified anti-vibration glove with dorsal protection S-L PR $49.04 

ERG9015XL 

ProFlex 9015 certified anti-vibration glove with dorsal protection XL PR $54.03 

ERG9015XXL 

ProFlex 9015 certified anti-vibration glove with dorsal protection 2X PR $54.03 



Performance 

A 

A. DPG210 Heavy Utility PVC Padded Palm Glove 

Form fitting, medium dexterity, abrasion resistant glove with anatomically positioned reinforced 

PVC palm overlays and memory foam provides more versatility and impact protection 

than similar gloves in the field. 


RADDPG210 Heavy Utility PVC padded palm glove S-L PR $21.03 

RADDPG210XL Heavy Utility PVC padded palm glove XL PR $21.78 


B. DPG260 ToughTack Grip Performance Work Glove 

Box handler style glove with ToughTack, our 100% silicone triple silk screened palm, is the 

longest lasting tacky grip glove in the category. 


RADDPG260 ToughTack Grip performance work glove S-L PR $22.78 

RADDPG260XL ToughTack Grip performance work glove XL PR $23.62 

B 

C 

C. DEWALT DPG219 Slip-On All Purpose Synthetic Leather Glove 

Comfortable, lightweight glove provides superior dexterity and tactile sensitivity when compared 

to any product in its class. 


RADDPG219 Wind & water resistant fleece work glove S-L PR $17.68 

RADDPG219XL Wind & water resistant fleece work glove XL PR $15.62 

146 


Supported 

A 


A. Premium High Dexterity Nitrile Dipped Gloves 

Gloves feature a premium nitrile coating for abrasion and puncture resistance. The lightweight 

interlock liner enhances dexterity and tactile sensitivity. Actifresh treated. 


MSG6980 Premium nitrile palm coated gloves, smooth finish, knit wrist, interlock shell S-L DZ $26.03 

MSG6980XL Premium nitrile palm coated gloves, smooth finish, knit wrist, interlock shell XL DZ $26.03 

B 

C. Premium Nitrile Dipped Gloves, Fully Coated 

B. Premium Nitrile Dipped Gloves, Jersey Lined 

Premium nitrile fully coated gloves with smooth finish. These gloves have an interlock shell, 

knit wrist and are ActiFresh® treated. 


MSG6981 Premium Nitrile fully coated gloves, smooth finish, interlock lined, knit wrist S-L DZ $27.39 

MSG6981XL 

Premium Nitrile fully coated gloves, smooth finish, interlock lined, knit wrist XL DZ $27.77 

Gloves are jersey lined and fully coated with premium nitrile rubber. Knit wrist keeps debris 

and foreign material out of glove. Actifresh® treated. 


MSG6951 

Premium nitrile palm coated gloves, smooth finish, jersey lined, knit wrist L DZ $40.38 

MSG6951R 

Premium nitrile palm coated gloves, rough finish, jersey lined, knit wrist L DZ $40.38 

C 


D 

D. Premium Nitrile Palm Coated Gloves 

Gloves are jersey lined and palm coated with premium nitrile rubber. 2-1/2” safety cuff 

protects wrist. This synthetic rubber resists a wide range of solvents and hazardous chemicals, 

while providing better resistance to cuts and abrasions than neoprene or PVC gloves. 

Actifresh® treated. Available with smooth or rough finished palms. 


MSG6960 Premium nitrile palm coated gloves, smooth finish, safety cuff L DZ $33.20 

MSG6960XL Premium nitrile palm coated gloves, smooth finish, safety cuff XL DZ $41.30 

MSG6960R Premium nitrile palm coated gloves, rough finish, jersey lined, safety cuff L DZ $41.30 

E 

E. Premium Nitrile Fully Coated Gloves 

Premium nitrile fully coated glove with smooth finish. This glove has a jersey shell, 2-1/2” 

safety cuff and is ActiFresh® treated. 


MSG6961L 

Premium nitrile fully coated gloves, smooth finish, jersey lined, safety cuff L DZ $36.77 

MSG6961RL 

Premium nitrile fully coated gloves, rough finish, jersey lined, safety cuff L DZ $43.12 



Supported 

A 

A. Hylite ® 

Hylite combines the comfort of a cotton lining and the exceptional snag, puncture, abrasion, 

and cut resistance of a nitrile coating in a medium-duty glove. The glove is a better alternative 

to cotton, light- to medium-duty leather, and PVC. For extra comfort, Hylite features an interlock 

knit lining, generous sizing, and a contoured design. Hylite gloves outwear cotton up to 12 

to 1, light leather 5 to 1, and PVC-coated gloves 3 to 1. 

SKU Description Coating Style Size UOM Price 

ANS47-400 Hylite gloves Palm Knit wrist S-L DZ $46.60 

ANS47-400XLG Hylite gloves Palm Knit wrist XL DZ $46.60 

ANS47402 Hylite gloves Fully Knit wrist S-XL DZ $47.63 


B. Neox ® 

The neoprene coating on Neox gloves provides better all-around resistance to cuts, abrasions, 

and chemicals than most other glove coatings, while the interlock knit cotton lining enhances 

puncture and snag resistance. Curved fingers with a wing thumb provide a natural fit and 

greater comfort, and the two-piece lining eliminates irritating seams. 

SKU Description Length Style Size UOM Price 

ANS9922 

Neox gloves 12” Gauntlet 10 DZ $93.60 

ANS9924 

Neox gloves 14” Gauntlet 10 DZ $122.88 

ANS9928-10 Neox gloves 18” Gauntlet 10 PR $15.63 

B 

C 

C. Rubber Coated Gloves 

Made with FDA accepted materials for use in food processing applications. Rough textured 

natural rubber coating for greater gripping power and a higher degree of cut resistance. 


MSG5615 

Rubber coated gloves L DZ $26.95 

D 

D. Premium Rubber Coated Gloves 

This rough textured, natural rubber coated glove offers greater gripping power and a higher 

degree of cut resistance. Also features a crinkle finish. 


MSG5605 

Premium rubber coated gloves L DZ $37.20 

148 


Unsupported 

A 


A. Vinyl Impregnated Slip-on Glove 

This vinyl impregnated glove stretches to slip over the hand. Russet in color. 


MSG6000 

Vinyl impregnated slip-on glove M-L DZ $12.52 

MSG6000XL Vinyl impregnated slip-on glove XL DZ $13.43 

B 

B. Vinyl Coated Gloves 

Dipped in vinyl. Seamless knit liner. Porous textured coating allows for breathability and easy 

gripping, while minimizing the absorption of water, oil and grease. Actifresh® treated to help 

retard odors and eliminate germs by controlling bacterial build-up. 


MSG6500 

Vinyl coated gloves XS-L DZ $34.12 

MSG6500XL Vinyl coated gloves XL DZ $34.12 


C. Neoprene Over Latex Gloves 

The neoprene over latex glove features a premium neoprene palm and back with a latex cuff. 

Features include a 30 mil thickness, flock lining and a 13” length. 


MSG4307 

30mil Neoprene over latex unsupported gloves, flock lined 7 DZ $23.97 

MSG4308 


MSG4309 


MSG4300 


C 

D 

D. Chemi-Pro ® 

A unique dipping process which combines neoprene over natural rubber latex provides increased 

protection against a wide range of chemicals. The gloves are 27 mil thick for extra 

ruggedness and durability, and the 13” length is longer than most standard gloves for added 

forearm protection. A recessed diamond-embossed pattern provides added grip on wet or 

dry surfaces, while a cotton flock lining absorbs perspiration and increases worker comfort. 

Chemi- Pro gloves are an economical, cost-saving substitute for higher-priced, heavy gauge 

nitrile and neoprene gloves. 


ANS224-7 

Chemi-Pro 27mil unsupported gloves, flock lined 7 DZ $20.52 

ANS224-8 


ANS224-9 


ANS224-10 




Unsupported 

A 

A. Premium Nitrile Unsupported Gloves 

Premium nitrile unsupported gloves 13” in length, 11 mil thick and unlined. 


MSG4408 

Premium 11 mil nitrile unsupported gloves, unlined 8 DZ $18.33 

MSG4409 


MSG4410 


MSG4411 



B. Double Dipped Neoprene Gloves 

100% Neoprene coated, double dipped gloves feature a sandpaper grip, interlock lining and 

gauntlet cuff. Double dipped gloves provide better abrasion and chemical resistance. The interlock 

lightweight lining provides a “cool” wear. Green color. 12” and 14” long. 

SKU Description Length Size UOM Price 

MSG6872 

Double dipped neoprene gloves, interlock lined 12” S-L DZ $75.40 

MSG6872XL 

Double dipped neoprene gloves, interlock lined 12” XL DZ $75.40 

MSG6874L 

Double dipped neoprene gloves, interlock lined 14” L DZ $88.02 

MSG6874XL 

Double dipped neoprene gloves, interlock lined 14” XL DZ $88.02 

B 

C 

C. Scorpio ® 

Neoprene coated Scorpio gloves offer broad spectrum resistance to a wide range of chemicals, 

including oils, acids, solvents and caustics. The interlock knit cotton lining and flexible 

neoprene coating stretch to provide a snug fit, and allows for easy on and off, while the twopiece 

lining eliminates seams, which can cause hand irritation and premature wear-through. A 

dipped rough finish makes handling wet, slippery materials easier and safer. 


ANS8352- Scorpio gloves 12” 7-10 DZ $61.60 

ANS8354 

Scorpio gloves 14” 8-10 DZ $76.08 

D. AlphaTEC 

When you work with hazardous chemicals or dangerous liquids, you can’t afford any kind of 

slip. That’s why the AlphaTEC glove features the revolutionary Ansell Grip Technology. Our 

patent- pending nitrile layer is filled with microscopic channels that actively repel oils and other 

lubricants, giving you nearly the same grip you would have in fluid-free conditions. Combined 

with an advanced ergonomic design, the AlphaTEC glove greatly increases control and comfort, 

significantly reducing fatigue and CTS-related injuries. 


ANS58-535M AlphaTEC M DZ $87.83 

ANS58-535LG AlphaTEC L DZ $87.83 

D 

150 


Unsupported 


A. Sol-Vex ® 

Sol-Vex gloves are made of a high-performance nitrile compound which provides an outstanding 

combination of strength and chemical resistance. When exposed to aromatic and petroleum 

solvents, as well as caustics and animal fats, Sol-Vex gloves have proven to be a superior 

choice over rubber or neoprene. Sol-Vex gloves won’t swell, weaken or degrade, and they offer 

better protection against snags, punctures, abrasions and cuts. And, as added benefits, Sol- 

Vex gloves do not promote contact dermatitis, and their component materials comply with FDA 

regulations for food contact. 

SKU Description Thickness Length Size UOM Price 

ANS37155- Sol-Vex embossed gloves 15 mil 13” 7-11 DZ $26.18 

ANS37175-6 Sol-Vex embossed, flock-lined gloves 15 mil 13” 6 DZ $18.88 






ANS37185-7 Sol-Vex embossed gloves 22 mil 18” 7 DZ $112.00 





A 


B 

B. 17” PVA Gloves 

Hall’s Solvaseal coated gloves have all the features that provide comfort--curved fingers, wing 

thumb construction and just the right weight. Developed particularly for use in Ketones, Acetones 

and petroleum base degreasing solvents such as Varsol and Mid-Solv. 


HAL88 

17” PVA gloves DZ $240.00 

C 

C. Premium, Double Dipped, 12” Rubber Coated Gloves 

Gloves have excellent abrasion, cut and puncture resistance as well as good gripping capabilities. 

Features include safety cuff and interlock liner. 


MSG5680S 

Premium, double dipped, 12” rubber coated gloves S DZ $48.25 

MSG5680L 

Premium, double dipped, 12” rubber coated gloves L DZ $48.25 



Unsupported 

A 

A. PVC Double Dipped Gloves 

Made of double dipped 100% Poly Vinyl Chloride (PVC). Features sandpaper finish and interlock 

lined construction. 


MSG5112SI PVC double dipped gloves 12” L DZ $25.13 

MSG5114SI PVC double dipped gloves 14” L DZ $27.77 


B. PVC Double Dipped Non-Slip Gloves 

Blend of PVC compound and high quality plasticizers for maximum benefit in specific industrial 

applications. Maximum resistance to mild chemicals, oils and solvents, and strong acids. Double-dipped 

sandy finish. Flexible, non-slip grip in wet or dry applications. Actifresh® treated. 

Launderable. Jersey lining. Gauntlet Cuffs. 


MSG5112SJ PVC double dipped non-slip gloves 12” L DZ $26.95 

MSG5114SJ PVC double dipped non-slip gloves 14” L DZ $30.48 

C 

C. Double Dipped PVC Gloves with Etched Finish 

Made of double dipped 100% Poly Vinyl Chloride (PVC). Features etched finish and interlock 

lined construction. 


MSG5112I Double dipped PVC gloves with etched finish 12” L DZ $25.13 



B 

D. PVC Dipped Gloves 

Made of 100% Poly Vinyl Chloride (PVC). Features an interlock lined construction. 

SKU Description Finish Length Size UOM Price 

MSG5000 

PVC dipped w/knit wrist Smooth XL DZ $15.23 

MSG5012 

PVC dipped gloves Smooth 12” XL DZ $20.15 

MSG5012R PVC dipped gloves Rough 12” XL DZ $21.05 

MSG5014 


MSG5014R PVC dipped gloves Rough 14” XL DZ $23.32 

MSG5018 


D 

E 

E. Snorkel ® 

One of our premium gloves, Snorkel features a unique PVC/Nitrile-blend rough finish which 

provides outstanding chemical resistance, wear, and flexibility. The finish contains nylon particles 

that increase the glove’s cut/abrasion resistance and wet grip capabilities, while the PVC 

compound provides greater flexibility and comfort. Fully coated, 12” gauntlet, jersey-lined. 


ANS4412-10 Snorkel L DZ $56.08 

152 


Unsupported 


A. Natural Blue 

Natural Blue gloves are 17 mil thick for superior tactile sensitivity and dexterity, as well as good 

chemical, snag, puncture, abrasion- and cut-resistance. Made with component materials that 

comply with FDA regulations for food contact, the gloves feature a patterned grip and a conspicuous 

blue color which is preferred by the poultry and food processing industries. 12” long. 


ANS356- Natural Blue gloves 7-10 DZ $12.78 

A 

C. Canners and Handlers 

B 

B. FL100/FL200 

Unsupported, unlined, medium-duty, natural rubber latex. Featuring excellent dexterity, tensile 

strength, and elasticity, our 20-mil Canners and Handlers gloves are a good choice for chemical, 

snag, puncture, abrasion, and cut resistance. 14” length for added protection against 

chemical hazards. Embossed design for excellent grip on wet or dry surfaces. Canners and 

Handlers gloves are made with component materials that comply with FDA regulations for food 

contact. Natural, pebble embossed, 20 mil, 12”. *Caution: This product contains natural rubber 

latex which may cause allergic reactions in some individuals. 


ANS392- Canners and Handlers gloves 7-11 DZ $14.02 

These natural latex, cotton flock-lined gloves provide a high degree of tensile strength while 

maintaining excellent sensitivity. Embossed pattern design provides improved grip on wet or 

dry objects. Made from component materials that comply with FDA regulations for food contact. 

*Caution: This product contains natural rubber latex which may cause allergic reactions in 

some individuals. 

SKU Description Thickness Length Size UOM Price 

ANS155-7 

Blue unsupported flock lined gloves 17 mil 12” 7 DZ $11.13 

ANS155-8 


ANS155-9 


ANS155-10 


C 


D 

D. Orange Heavyweight 

With a 29 mil palm thickness that is 50% greater than most standard flock-lined gloves, Orange 

Heavyweight gloves provide added protection against chemical and physical hazards due to 

their increased puncture/cut resistance and tensile strength. In addition, the 100% cotton flock 

lining increases user comfort. Diamond embossed palm improves grip in wet environments. 


ANS208- Orange Heavyweight gloves 13” 7-10 DZ $25.20 

E. Latex Flock Lined Gloves - USDA 

This .018” thick glove is 12-inches in length and features an embossed grip, palm, fingers and 

straight cuffs. It has USDA acceptance for use in food processing applications. One dozen pair 

per poly bag. 


MSG4250 

Latex flocked lined gloves 8-10 DZ $12.43 

E 



Disposable 

A 

A. TNT ® Blue Thin Nitrile Gloves 

Disposable nitrile gloves set a whole new standard in durability and chemical splash protection. 

Features textured finger tips for exceptional grip. Recommended for manufacturing, 

light-duty maintenance, automotive, intricate parts handling, laboratory analysis and technical 

work. Lightly powdered in a clean polybag. Superior flexibility, puncture resistance, made of 

100% nitrile. The glove contains absolutely no fillers, additives, silicones or plasticizers. Rolled 

cuff gives additional cuff strength and protects the skin from chemicals running off the glove. 

Complies with FDA regulations for food contact. 

SKU Description Thickness Size UOM Price 

ANS92575 TNT nitrile gloves lightly powdered 4 mil S-L 100/BX $9.83 

ANS92575XL TNT nitrile gloves lightly powdered 4 mil XL 100/BX $9.53 


B. Touch N Tuff ® 

Touch N Tuff disposable gloves set a whole new standard in comfort, durability, dexterity 

and cleanliness. Made of 100% nitrile, the gloves contain absolutely no fillers, silicones or 

plasticizers. Although they are only 4 mils thick, Touch N Tuff gloves provide three times the 

puncture resistance of competitive latex or vinyl gloves. 9.5 inches in length, they are available 

powdered or powder-free. 


ANS92500S Touch-N-Tuff, lightly powdered S 100/BX $11.43 

ANS92500M Touch-N-Tuff, lightly powdered M 100/BX $11.43 

ANS92500L Touch-N-Tuff, lightly powdered L 100/BX $11.43 

ANS92500XL Touch-N-Tuff, lightly powdered XL 100/BX $11.43 

ANS92600S Touch-N-Tuff, powder free S 100/BX $13.43 

ANS92600M Touch-N-Tuff, powder free M 100/BX $13.43 

ANS92600L Touch-N-Tuff, powder free L 100/BX $13.43 

ANS92600XL Touch-N-Tuff, powder free XL 100/BX $13.43 

B 

C 

C. TNT ® Blue Nitrile Gloves 

TNT Blue disposable nitrile gloves are durable yet soft for improved comfort, and they feature 

textures fingers for exceptional grip. These gloves are 5 mil thick and 9-1/2” in length. Component 

materials comply with FDA regulations for food contact. TNT gloves are static dissipative. 


ANS92675 TNT Blue nitrile gloves powder-free S-L 100/BX $11.33 

ANS92675XL TNT Blue nitrile gloves powder-free XL 100/BX $10.83 

D. Nitri-Cor Blue Thin Nitrile Gloves 

These 4 mil nitrile disposable gloves are lightly powdered industrial/food service grade. They 

are made with USDA/FDA accepted materials for use in food service applications. Rolled cuff, 

9” long. 


MSG4090 

Nitri-Cor, powdered S-L 100/BX $8.98 

MSG4090XL Nitri-Cor, powdered XL 100/BX $8.98 

D 

154 


Disposable 


A. Conform ® USDA Gloves 

Conform gloves provide the highest degree of dexterity available with the strength and comfort 

of 100% natural rubber latex. Component materials comply with FDA regulations for food 

contact. 


ANS69210-S Conform USDA gloves S-L 100/BX $8.33 

ANS69210-XLG Conform USDA gloves XL 100/BX $8.33 

A 

C. Poly-D Disposable Gloves 

B 

B. Dura-Touch Gloves 

Low-cost, short-term protection for a variety of uses. Ambidextrous for use on right or left 

hand. USDA accepted for meat and food handling. 0.25mil 100/Box. 


ANS35112L 

Poly-D disposable gloves L 100/BX $8.95 

When you need economical hand/product protection, Dura-Touch clear 5-mil PVC gloves are 

the best choice. They offer near “bare hand” dexterity and sensitivity, and they’re lightly powdered. 

Component materials comply with FDA regulations for food contact. 


ANS34-775 Dura-Touch gloves M-L 100/BX $5.23 

ANS34-775XL Dura-Touch gloves XL 100/BX $5.08 

C 


D 

D. Vinyl Disposable Gloves 

Non-exam food grade, blue vinyl gloves are lightly powderer with a rolled cuff. They have a 

thickness of 5 mil and a 9” length. 


MSG4071 

Vinyl disposable gloves S-L 100/BX $5.12 

MSG4071XL Vinyl disposable gloves XL 100/BX $5.12 

E. Latex Disposable Gloves 

These 5 mil latex disposable gloves are available in exam or industrial grade. Rolled cuff, 9” 

long. 


MSG4010 

Latex disposable gloves, powder free, exam grade XS-L 100/BX $10.23 

MSG4010XL Latex disposable gloves, powder free, exam grade XL 100/BX $10.23 

MSG4015 

Latex disposable gloves, powder free, industrial grade XS-L 100/BX $8.98 

MSG4015XL Latex disposable gloves, powder free, industrial grade XL 100/BX $8.98 

MSG4020 

Latex disposable gloves, powered, industrial grade S-L 100/BX $8.10 

MSG4020XL Latex disposable gloves, powered, industrial grade XL 100/BX $8.10 

E 



High Voltage 


B. Leather Glove Protectors 

A 

A. High Voltage Linemen’s Gloves 

ILP Series leather protectors are manufactured from grain cowhide or goatskin. These protectors 

provide excellent protection for rubber insulating gloves at an economical price. Cowhide 

and pigskin cuffs are tough leather on palm side and orange vinyl on the back. ILP Series 

protectors feature adjustable straps with non-metallic buckles and are stitched with polyester 

thread for strong seams. 

SKU Description Material Length Size UOM Price 

SALILPG10A8 Leather glove protectors, high voltage Goatskin 12” 8/8.5 PR $25.67 




SALILP108.5 Leather glove protectors, low voltage Cowhide 10” 8/8.5 PR $25.22 




Manufactured for outstanding protection, comfort and long-life. Rubber insulating gloves are 

among the most important articles of personal protection for electrical workers. Contrasting 

two color combination allows for easy inspecting of gloves for cuts and tears when the glove 

is inflated or stretched. Incorporating high dielectric and physical strength, flexibility and durability, 

Salisbury rubber insulating gloves have earned the reputation for superior performance - meeting 

and exceeding the requirements of current ASTM D120 specifications. 

SKU Description Color ASTM Class Size UOM Price 

SAL2014RB8 High voltage linemen’s gloves, 14” Red/black II 8 PR $194.40 

SAL2014RB85 High voltage linemen’s gloves, 14” Red/black II 8.5 PR $194.40 







B 

C 

C. Insulating Rubber Gloves 

Salisbury by Honeywell gloves combine high dielectric and physical strength with flexibility 

and durability to meet and exceed the requirements of current ASTM D120 specifications and 

NFPA 70E standards. These insulating rubber gloves are Class 0 rated for low voltage use with 

a maximum use voltage of 1,000. They are 11” in length. 


SALE011B-8 Insulating rubber gloves 8 PR $72.49 



156 


High Heat 


A 

A. 24 oz. Hot Mill Gloves with Band Top 

100% cotton quilted with nap-out palm, thumb and index finger. Knuckle straps. Economy 

weight. Band Top. Industry applications include: foundries, forging operations and other applications 

requiring heat protection. 


MSG2500 

24 oz. hot mill gloves with band top DZ $19.60 

B 

B. 24 oz. Hot Mill Gloves with Gauntlet Cuffs 

100% cotton quilted with nap-out palm, thumb and index finger. Knuckle straps. Regular 

weight. 4-1/2” Gauntlet cuffs. Industry applications include: foundries, forging operations and 

other applications requiring heat protection. 


MSG2505 

24 oz. hot mill gloves with gauntlet cuffs DZ $24.22 


C 

C. Heavy Weight Hot Mill Gloves 

Heavy weight hot mill gloves with 3 ply palms made of cotton-burlap-cotton. Features a knuckle 

strap and a band top. 


MSG2515 

Heavy weight hot mill gloves DZ $26.03 

D 

D. Kelklave Autoclave Gloves 

Kelklave Autoclave Gloves have a 5” gauntlet cuff and feature a clute pattern. The Kelklave 

resists heat temperatures up to 250°F, offering protection to the hands. 


JOM4225 

Kelklave autoclave gloves DZ $72.20 



Accessories 

A 

A. Barrier 

A major breakthrough in flat-film glove technology, Barrier gloves feature a unique non-woven 

liner that absorbs perspiration and makes the gloves comfortable to wear, especially for extended 

periods. In addition, the winged-thumb, hand-specific design provides greater dexterity. 

Proprietary seam-fusion technology provides a secure seal against chemicals and also assures 

a flexible, comfortable fit for greater dexterity and reduced hand fatigue. 

SKU Description Thickness Size UOM Price 

ANS2-100- Barrier flat film chemical resistant gloves 2.5 mil 6-11 PR $6.65 


B. Glass Cloth High Heat Glove 

14” Glove, leather reinforced palm, thumb, and fingers. Made from heavyweight textured fiberglass 

material, coated to allow maximum wear and protection. All styles are blue in color, full 

wool lined and sewn with Kevlar Thread. 


STANG214LWL 

High heat, glove, men’s PR $38.67 

C 

C. Hot Not Gloves 

B 

Hot Not heat-resistant gloves allow you to work around and handle hot engines, machinery, 

ovens and most any hot industrial process without burning your fingers. You can constantly 

handle many materials 500 °F or less and intermittently handle materials up to 700 °F. The 

HOT Not glove can withstand accidental contact with flame or solid hot objects up to 2000 °F. 

Comfortable, flexible and breathable. Machine washable and dryable. 100% Nomex IIIA. One 

size fits all. Seamless stretch knit. 


ESP200 

Hot Not glove PR $45.53 

D. Plastic Glove Dispensers 

Plastic box glove dispenser with table and wall mount for easy access. 

SKU Description Dimensions UOM Price 

HORI5101 1 box dispenser clear plastic 9 1/2”H x 11”W x 4”D EA $31.72 

HORI5102-W 1 box dispenser white plastic 9 1/2”H x 11”W x 4”D EA $30.12 

HORI5103 2 box dispenser clear plastic 10”H x 11”W x 4”D EA $43.37 

HORI5105 3 box dispenser clear plastic 15 ¼”H x 11”W x 4”D EA $51.55 

HORI5107 4 box dispenser clear plastic 20”H x 11”W x 4” D EA $62.48 

D 

HORI5101 

HORI5102W 

E 

HORI5107 

HORI51015 

HORI5103 

158 

HORI4015 

HORI4008 

E. No Spill Top Dispensing Glove Racks 

Glove box opening faces up to prevent gloves from falling on the floor – reducing waste. Extra 

gloves can easily be placed on the top of the box. Powder coated steel to resist bleaches, 

solvents, and common acids. 

SKU Description Dimensions UOM Price 

HORI4008 1 box “1 hand” top dispensing exam glove rack 4 1/4”H x 11 1/2”W x 1/2”D EA $26.52 

HORI4009 2 box top dispensing exam glove rack 9 1/4”H x 14”W x 7”D EA $44.40 

HORI4010 3 box top dispensing exam glove rack 16 1/2”H x 14”W x 7”D EA $53.70 

HORI4015 4 box top dispensing exam glove rack 24 1/2"H x 14"W x 7"D EA $67.27 


Accessories 


A. Glove Guard ® Holder 

Glove Guard with a proven record of over ten years keeps gloves close at hand while keeping 

the worker safe with the patented break-away center. Made of engineered grade material that 

holds its memory and resists flex fatigue as well as being non-conductive and non-corrosive, 

its sleek design lies close to the body so as not to interfere with job activities. 


GOFIN1939 Granite Glove Guard with Medsafe logo EA $4.85 

GOFIN1939YL Yellow Glove Guard with no logo EA $4.85 

A 

B 

B. Squids ® Glove Grabber 

The Glove Grabber is a handy and cost effective device for improving worker safety by making 

it easier than ever to keep gloves within reach at all times. Using a patent-pending design that 

opens smoother and wider, the Glove Grabber holds gloves of every style and thickness and 

for virtually any application. 


ERG3400Y Squids Glove Grabber EA $2.86 


C 

C. Glove Bag 

Glove bag made from lightweight yellow vinyl with snap closures and attachment hooks. 


SAL55-14 

Yellow vinyl glove bag 16” EA $52.85 

D 

D. Canvas Glove Bags 

Salisbury by Honeywell bags are constructed of heavy duty canvas duck and are double 

stitched at stress points for extra durability. Canvas bags feature a D-ring for hanging in trucks 

or on work belts. Bags feature tapered gussets with wide opening tops for easy insertion. 


SALGB114 Canvas glove bag, holds 14” glove 9” x 16” EA $32.95 

SALGB116 Canvas glove bag, holds 16” glove 9” X 18” EA $36.22 

SALGB118 Canvas glove bag, holds 18” glove 9” X 20” EA $38.08

Hand Protection - Gosafe.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?