Data Sheet

RELATED ACCESSORIES
DP-VEN-03
DP-VEN-06
DP-VEN-09
Ventilation units & accessories for proper air management
Ventilation units are available with 2 -
9 fans. Possible to install horizontally in
19" extrusions or in top or bottom frame
(connecting kit for ventilation unit is needed
when installing in top or bottom frame).
Works in temperature range -10°C to
55°C. Thermostat in the range 0°C - 60°C
is included (optionally no thermostat). The
voltage range is 230V/50Hz (optionally 48V
DC). Protection category (to EN 60 529)
IP20. Colour powder coated RAL (standard
RAL 9005). Enhanced option signed as DP-
VEN-xx-E.
Code
Air through
put (m3.h-
1)
Rated current
max. (A)
Power (W)
Noise
level* (dB)
DP-VEN-02 210 0,18 38 48,0
DP-VEN-03 315 0,27 57 49,8
DP-VEN-04 420 0,36 76 51,0
DP-VEN-05 525 0,45 95 52,0
DP-VEN-06 630 0,54 114 52,8
DP-VEN-07 ¹ 735 0,63 133 53,5
DP-VEN-08 ¹ 840 0,72 152 54,0
DP-VEN-09 ¹ 945 0,81 171 54,5
DP-VEN-02-E 330 0,28 44 53,0
DP-VEN-03-E 495 0,42 66 54,8
DP-VEN-04-E 660 0,56 88 56,0
DP-VEN-05-E 825 0,70 110 57,0
DP-VEN-06-E 990 0,84 132 57,8
DP-VEN-07-E ¹ 1155 0,98 154 58,5
DP-VEN-08-E ¹ 1320 1,12 176 59,0
DP-VEN-09-E ¹ 1485 1,26 198 59,6
¹ these ventilation units are compatible only with racks 1000mm deep
Vertical Cable Management
PLASTIC CABLE BRACKETS
Code H in mm D in mm
VO-P2-40/50 40 50
VO-P4-80/60 80 60
VO-P6-40/80 40 80
VO-P8-80/80 80 80
Plastic cable brackets are
equipped with metal flange for
installing on 19" vertical extrusions.
Colour powder coated
RAL (standard RAL 9005);
brackets are black.
Code
Rack height (U)
HVMF-21 21
HVMF-27 27
HFMF-42 42
HVMF-45 45
Holders of vertical wire management
panels and cable
brackets (ordered separately)
HVMF series are installed
in RI7 800mm wide racks. Set
includes 2 holders. Mounting kit
included. Colour powder coated
RAL (standard RAL 9005).
VO-P
Vertical wire management
plastic panels DP-VP series
are used for storing and
vertical cable managing. They
are installed on front part of
vertical extrusions by using
HVM holders (ordered separately).
They are produced in
sizes 15 – 48U. Size of plastic
duct for cable management is
80x60mm. Ducts of size 33U
and up have cover divided for
easier putting on and removing.
Oval opening in base of
ducts and in vertical extrusions
allow front to rear cabling. Colour
black.
Code
METAL CABLE BRACKETS
Dimensions in
mm
W
D
Cable
entry
Qty
VO-W1-100/140 140 100 side 10 pcs
VO-W2-100/140 140 100 front 10 pcs
Metal cable brackets are available in dimensions
100x140mm and equipped with
4 holes for installing on front or side of 19"
vertical extrusions. They are zinc plated
with front or side cable entry. Each code
contains 10pcs of brackets.
Code
Rack height (U)
80/80,
80/100
DP-VP-VR-21 21
DP-VP-VR-27 27
DP-VP-VR-42 42
DP-VP-VR-45 45
Code
Rack height
U
panels width 150mm panels width 300mm RI7*
DP-VV-21U/150 DP-VV-21U/300 21
DP-VV-27U/150 DP-VV-27U/300 27
DP-VV-42U/150 DP-VV-42U/300 42
DP-VV-45U/150 DP-VV-45U/300 45
*Installation either directly in top and bottom frame of the
rack or on holders of vertical extrusions
Panels for side
vertical cable management
DP-VV
series are used for
vertical cable guiding
in free standing
racks in space
between 19” extrusions
and side panels.
Produced in
widths 150mm and
300mm and for rack
sizes 15-48U. Set of
fittings included.
Code
Dimensions in mm
H W D
HVMS-B-800-140/30 805 170 35 21*
HVMS-B-1000-140/30 1005 170 35 27*
HVMS-B-1800-140/30 1805 170 35 42, 45
HVMS-B-800-140/60 805 170 65 21*
HVMS-B-1000-140/60 1005 170 65 27*
HVMS-B-1800-140/60 1805 170 65 42, 45
Used in rack
height (U)
* HVMS-B compatibility with RI7 21U & 27U limited - contact
us to check the compatibility
Cable basket trays HVMS-B series are used for
vertical cable guiding in space between 19” extrusions
and side panels. Available sizes 140x30mm and
140x60mm. Produced for rack sizes 15-48U. Mounted
on holders of vertical extrusions (horizontal holders
are needed for racks of 18, 21, and 27U). Set of fittings
included.