Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>BODY</strong> & <strong>FENDER</strong> <strong>TOOL</strong> <strong>SETS</strong><br />
OTC-543036<br />
Body Shop Tools<br />
& Equipment<br />
OTC-6650<br />
OTC-6650 1500W Magnetic Induction Heating System<br />
(Sistema de Calentadora de Inducción Magnético)<br />
Ideal for mechanical repair, auto body repair and recycling facilities. 110-volt<br />
unit produces heat in seconds within metal objects such as body panels, nuts,<br />
bolts and pinch weld areas behind glass—without heating or damaging nonmetallic<br />
objects. Includes bolt inductor, glass inductor, body inductor, foot<br />
switch, and instructional CD. All inductors have an electrical interlock and/or<br />
molded strain reliefs. Dimensions: 9.0" W x 14" L x 8.5" H. (25 lbs.)<br />
OTC-543036 Hail Dent Inductor<br />
OTC-546552 Induction Heater Cart<br />
OTC-546552<br />
ATD-4034<br />
AST-5510<br />
7-PIECE <strong>BODY</strong> AND <strong>FENDER</strong> <strong>SETS</strong><br />
• 7 PZS. SET DE HERRAMIENTAS PARA<br />
LA CAJA Y EL GUARDAFANGO •<br />
Sets include bumping hammer, pick hammer, body hammer, heel dolly,<br />
universal dolly, all purpose dolly, combination dolly. In blow molded case.<br />
ATD-4034<br />
Wood Handles<br />
AST-5510<br />
Fibreglass Handles<br />
587
<strong>BODY</strong> & <strong>FENDER</strong> <strong>TOOL</strong> <strong>SETS</strong><br />
Body Shop Tools<br />
& Equipment<br />
ATD-4033<br />
ATD-5160<br />
ATD-4033 3-Piece Body and Fender Spoon Set<br />
(3 pzs. Set de Cucharas para Carrocería<br />
y Guardafango del Vehículo)<br />
Sets include long handled spoon dolly, long curved spoon and light<br />
dinging spoon.<br />
ATD-5160 "Muscle Max" Dent Puller Kit<br />
(Kit de Extractor de Abolladura de”Muscle Max”)<br />
Includes 10-pound heavy duty slide hammer, pipes, hex nut, chain and<br />
hook, and five plates. 18.1 lbs.<br />
ATD-7541 Extra Duty Dent Puller<br />
(Kit de Extractor de Abolladura)<br />
Heavy duty dent puller/slide hammer with vinyl cushion finger grip<br />
hang-up handle. Puller comes with extra screws and hook for pulling<br />
bearings and seals. Shaft 1/2" x 20 thread. 5 lb. hammer.<br />
ATD-7541<br />
OTC-7947 Eight-Way Slide Hammer Puller Set<br />
(Set Extractor de Martillo Deslizante - Multiuso)<br />
Use for 2/3-way internal or external jobs.Attachments include a dent<br />
puller, internal/external pulling jaws, puller hook attachment, rear axle<br />
pulling attachment, and more.<br />
588<br />
OTC-7947
HYDRAULIC <strong>BODY</strong> REPAIR KITS<br />
ATD-5810<br />
Body Shop Tools<br />
& Equipment<br />
ATD-5800<br />
Designed to rigid QS 9000/ISO 9002 standards, rams are heat treated<br />
and chrome plated with extra thick wallsfor strength and durability.<br />
Safety overload mechanism prevents over travel and overloading.<br />
ATD-5800 4-Ton Kit<br />
(Kit De 4 Toneladas)<br />
Includes 4-3/4”-stroke ram, five extensions, ten attachments,<br />
six-foot hydraulic hose & rugged blow-molded storage case. (45.6 lbs)<br />
ATD-5810 10-Ton Kit<br />
(Kit De 10 Toneladas)<br />
Includes 6”-stroke arm, four extensions, ten attachments & patented wheelaround<br />
blow-molded case. (80 lbs)<br />
ATD-5802<br />
ATD-5802 5-Ton Heavy-Duty Pull Cylinder<br />
(Cilindro Resistente Del Tirón De 5 Toneladas)<br />
Equipped with 2 pull hooks and fits 1/4”, 5/16”, & 3/8” chains.<br />
ATD-5825 5-Ton Flat Body Cylinder<br />
(Cilindro Plano Del Cuerpo De 5 Toneladas)<br />
Base Dim: 2.36” (L) x 1.58” (W). Meets ASME/ANSI B30.1 Standards. Max. working<br />
pressure: 10,000PSI or 700 bar(1.3 lbs)<br />
ATD-5825<br />
589
<strong>BODY</strong> REPAIR KITS<br />
Body Shop Tools<br />
& Equipment<br />
AIR/HYDRAULIC SUPER PUMPS<br />
• SÚPER BOMBAS HIDRÁULICAS / NEUMÁTICAS •<br />
Handles rams up to 55-ton capacity. Develops 10,000<br />
psi air pressure, 80 cu. in. oil reservoir. (15.2 lbs)<br />
ATD-5812<br />
ATD<br />
OTC-4020 OTC Tools<br />
ATD-5812<br />
OTC-4020<br />
STINGER SERIES COLLISION REPAIR <strong>SETS</strong><br />
• <strong>SETS</strong> DE REPARACIÓN PARA COLISIÓN - STINGER •<br />
Components snap together for quick setups to apply pushing, spreading, or pulling force.<br />
Includes hydraulics along with extension tubes, adapters, and heavy-duty storage case.<br />
OTC-1513B 4-Ton - 4" stroke.<br />
OTC-1515B 10-Ton - 6" stroke. Storage case comes with wheels.<br />
COUPLERS<br />
• ACOPLADORES •<br />
Precision built and designed for high pressures. Permit disconnecting<br />
hose without loss of oil. 3/8" NPTF.<br />
OTC-9796 RAM Half Coupler with Dust Cap<br />
OTC-9798 Hose Half Coupler Only<br />
WORK STANDS<br />
• BANCAS DE TRABAJO •<br />
Lightweight construction with steel tubing and 1/2” foam padded top.<br />
Padding wraps around and down the top of the frame.<br />
ATD-7800<br />
1000 lbs. Capacity (22 lbs.)<br />
ATD-7811<br />
500 lbs. Capacity (14 lbs.)<br />
590
RIVET GUNS & KITS<br />
AST-1435<br />
AST-1435 Swingline 360° Swivelhead Riveter Kit<br />
(Kit Swingline con Cabeza Giratoria 360°)<br />
Includes four nose pieces and nose piece wrench. (1.8 lbs)<br />
AST-1434<br />
Swingline 360° Swivelhead Riveter Only<br />
AIR RIVETERS<br />
• REMACHADORES DEL AIRE •<br />
Lightweight riveters work at high speed and any angle.<br />
ATD-5830<br />
Up to 3/16” (3 lbs.)<br />
ATD-5831<br />
Up to 1/4” (3.5 lbs.)<br />
ATD-5841<br />
1/4” Industrial Duty<br />
Body Shop Tools<br />
& Equipment<br />
ATD-5833 Professional Hand Riveter Set<br />
(Set e Remachador Profesional de la Mano)<br />
Maximum setting power with minimal squeezing force. Includes 4 nosepieces<br />
(3/32”, 1/8”, 15/32”, 3/16”) and an assortment of rivets.<br />
ATD-5842 1/4” Heavy-Duty Hand Riveter<br />
(Remachador Manual 1/4" - Trabajo Pesado)<br />
Extra long handles provide excellent leverage (20.75” overall length with<br />
2.25” nose). Includes 5 nosepieces to set 1/8”, 5/32”, 3/16”, 7/32”, and 1/4”<br />
steel and aluminum rivets. (4.5 lbs.)<br />
ATD-5843<br />
Extended Nose Piece<br />
AST-1426<br />
1/4” Heavy-Duty Hand Riveter<br />
HUC-PR75K Quick Set Riveter for Plastic Rivets<br />
(Remachador para Remaches de Plásticos)<br />
One-hand operation sets most plastic rivets in a single stroke without regripping.<br />
Includes riveter and four starter packs of rivets for Ford, Chyrsler and GM<br />
vehicles. (1.8 lbs)<br />
HUC-AK175A Power Set Pneudraulic Riveter<br />
(Remachador Determinado De Pneudraulic De La Energía)<br />
For maintenance, repair and light production. 3,500 lbs. of pulling force. Sets<br />
a full range of rivets (1/8" - 1/4") by simply changing nosepiece. (1.8 lbs)<br />
HUC-202156 Nosepiece<br />
HUC-202157 1/4” Nosepiece<br />
HUC-202929 Replacement Jaws<br />
HUC-205400 Nutsetter Adapter Kit<br />
HUC-205401 Nutsetter Adapter Kit<br />
HUC-205403 Accessories Kit<br />
ATD-5833<br />
HUC-AK175A<br />
ATD-5842<br />
HUC-PR75K<br />
591
RIVET GUNS & KITS<br />
Body Shop Tools<br />
& Equipment<br />
MAR-39001<br />
MAR-39010<br />
MAR-39058<br />
MAR-39001 HP2 Professional Riveter Kit<br />
(Kit de Remachador Profesional HP2)<br />
Kit includes HP2 Riveter (sets up to 3/16" diameter rivets), 200 rivets, and molded case.<br />
MAR-39000 HP2 Riveter Only<br />
MAR-39123 Replacement Jaw Set<br />
MAR-39010 Big Daddy Riveter<br />
(Remachador de Big Daddy)<br />
Sets up to 1/4" diameter rivets with ease.<br />
MAR-39009 2-1/2” Extended Nosepiece<br />
MAR-96013 2-Piece Jaw Replacement Set<br />
MAR-96026 3/16” Nosepiece Replacement<br />
MAR-96027 1/4” Nosepiece Replacement<br />
MAR-39058 M-4 Air Riveter<br />
(Remachador de Aire de M-4)<br />
Supplied with 3/32", 5/32", 3/16" and 1/4" standard nose pieces, service tools, swivel<br />
inlet air coupler and a mandrel collection bottle. The recommended airline pressure is<br />
85-95 PSI. (6.2 lbs.)<br />
MAR-48000 Plastic Rivet Setter<br />
(Remachador para Remaches de Plásticos)<br />
Delivers the extra long pulling stroke needed to set plastic rivets. Packaged in a<br />
reusable, heavy-duty vinyl pouch.<br />
MAR-48000<br />
PROFESSIONAL MANUAL THREADED<br />
INSERT <strong>TOOL</strong> KITS<br />
• KITS DE HERRAMIENTAS DE INSERTO ROSCADO •<br />
Includes plier-style hand tool with quick-change mandrel and nosepiece design, and<br />
190-piece assortment of the most commonly used threaded inserts to be used in a<br />
variety of applications.<br />
POP-PNT110-I-KIT<br />
POP-PNT110-M-KIT<br />
SAE- Includes mandrels and nosepieces<br />
for 6-32, 8-32, 10-24, 10-32 & 1/4-20 size<br />
inserts.<br />
Metric- Includes mandrels and nosepieces<br />
sizes M3, M4, M5, and M6.<br />
592
KLIK FAST® RIVETS<br />
KLIK FAST® RIVETS<br />
• REMACHES DEL FAST® DEL KLIK •<br />
Professional Packaging - 500 Pc. Per Box<br />
RIVET GRIP STEEL RIVET ALUM. RIVET<br />
DIAM. RANGE STEEL MANDREL ALUM. MANDREL<br />
1/8" .020-.125 MAR-40112<br />
.126-.187 MAR-40115<br />
.126-.187 MAR-40116<br />
.188-.250 MAR-40117 MAR-40217<br />
.126-.250 MAR-40118<br />
.188-.250 MAR-40119<br />
.251-.313 MAR-40120<br />
.313-.375 MAR-40121 MAR-40221<br />
.376-.500 MAR-40122 MAR-40222<br />
5/32" .188-.250 MAR-40135<br />
.020-.125<br />
.126-.250 MAR-40247<br />
3/16" .251-.375 MAR-40249<br />
.040-.375 MAR-40250<br />
.376-.500 MAR-40152 MAR-40252<br />
.376-.500 MAR-40153<br />
.376-.500<br />
Body Shop Tools<br />
& Equipment<br />
STEEL RIVET/STEEL MANDREL<br />
THRIFT PACK RIVETS<br />
• PAQUETE DE REMACHES •<br />
CODE GRIP RIVET QTY./<br />
NO. RANGE DIA. PKG.<br />
POP-57438 SD42 1/16-1/8 1/8 25<br />
POP-57442 SD44 3/16-1/4 1/8 20<br />
POP-57446 SD46 5/16-3/8 1/8 15<br />
ALUMINUM RIVET/ALUMINUM MANDREL<br />
POP-57473 AD42-A 1/16-1/8 1/8 25<br />
POP-57477 AD44-A 3/16-1/4 1/8 20<br />
POP-57480 AD46-A 5/16-3/8 1/8 15<br />
POP-57487 AD62-A Up to 1/8 3/16 15<br />
POP-57488 AD64-A 1/8-1/4 3/16 15<br />
POP-57490 AD66-A 1/4-3/8 3/16 15<br />
BACK-UP PLATES<br />
POP-57660 SBUP-4 1/8 Hole Steel 40<br />
POP-57661 ABUP-4 1/8 Hole Alum 30<br />
POP-57662 ABUP-6 3/16 Hole Alum 30<br />
PLASTIC RIVETS<br />
• REMACHES DE PLÁSTICOS •<br />
GRIP RIVET QTY./<br />
RANGE† DIA. PKG.<br />
POP- 57714 .118-.177 5.0mm 25<br />
POP-57715 .118-.236 5.0mm 25<br />
POP-57721 .157-.335 6.0mm 25<br />
POP-57732 .157-.236 6.3mm 25<br />
POP-57735 .157-.236 6.3mm 25<br />
POP-57736 .157-.394 6.3mm 25<br />
POP-57752 .098-.236 7.0mm 25<br />
593
KLIK-LOK PLASTIC RIVETS<br />
Body Shop Tools<br />
& Equipment<br />
These are the same precision-molded all-nylon rivets used by domestic auto manufacturers. As they set, three “legs” form to securely lock the<br />
components in place and prevent pullout. Fasten plastic to plastic, plastic to metal and plastic to fiberglass.<br />
KLIK-LOK Rivets are packaged in reclosable, see-through, plastic boxes for easy identification. Each box features full rivet identification by<br />
dimensions and at least one O.E.M. part number. Rivets may actually fit many additional applications besides those listed here; simply match the<br />
rivet diameter with a particular application.<br />
GRIP<br />
20-PACK<br />
DIAMETER O.E.M. PART NO. RANGE PART NO.<br />
5.0 mm GM 20423647 .059" to .177" MAR-48105<br />
5.0 mm CHRY 6500898 .236" to .394" MAR-48108<br />
6.3 mm GM 14070914 .158" to .236" MAR-48149<br />
6.3 mm GM 14063981 .158" to .394" MAR-48150<br />
CHRY 6500911<br />
AMC 8934-201-631<br />
FORD N803043S<br />
6.3 mm GM 20452072 .158" to .394" MAR-48151<br />
6.6 mm GM 20433026* .098" to .197" MAR-48186<br />
VM 175-853-577A<br />
10/case<br />
*”P” Car Rivets<br />
SPECIAL APPLICATION RIVETS<br />
• REMACHES PARA APLICACIÓN ESPECIAL •<br />
Applied with MAR-39010 riveter with special nosepieces.<br />
QTY. DESCRIPTION<br />
MAR-42371 50 GM/Ford/Chrysler Window Regulator<br />
MAR-42372 50 Ford Outside Door Handle<br />
MAR-42373 50 GM Door Handle with Zinc Coated Mandrel<br />
MAR-42374 50 GM & Chrysler Window Regulator with<br />
Yellow Zinc Coated Mandrel<br />
MAR-42375 50 Ford Black Anodized Door Handle<br />
MAR-42376 50 Ford & Chrysler Glass Stop<br />
MAR-43150 50 GM Bumper Fascia Long Flng. Black Rivet<br />
MAR-43181 100 Ford Bumper Fascia Yellow Zinc Coated<br />
MAR-43353 50 GM & Chrysler Trunk Lock Swivel Emblem<br />
Rivet with Sealed End and<br />
Countersunk Head<br />
MAR-40516 500 SSBN4-3 Trim Molding with Stainless Steel<br />
Body<br />
KLIK® POLY-NUTS<br />
Now you can use bolts and machine screws in sheet metal even when<br />
you can only access one side of the work. Klik Poly-Nuts provide a nearly<br />
flush installation for a finished appearance.<br />
THREAD WORK DEPTH QTY/BOX<br />
MAR-47415 6-32 .020"-.080" 50<br />
MAR-47425 8-32 .020"-.080" 50<br />
MAR-47435 10-24 .020"-.130" 50<br />
MAR-47445 10-32 .020"-.130" 50<br />
MAR-47455 1/4-20 .030"-.165" 40<br />
MAR-47475 5/16-18 .030"-.165" 25<br />
MAR-47485 3/8-16 .030"-.165" 20<br />
594
HAND FILES/FILLER SPREADERS<br />
<strong>BODY</strong> FILES/SPREADERS & SANDING BLOCKS<br />
• ARCHIVOS DE CUERPO/ESPARCIDORES Y BLOQUES QUE ENARENAN •<br />
Designed for use in the automotive, marine and industrial fields where plastics, resins of all<br />
types, wood, steel, aluminum, etc. are used. A cushion which covers the entire area of the<br />
base makes the tool cut faster, prevents slippage, keeps the abrasive clean and helps prevent<br />
loading<br />
ATD-9540 Aluminum base, short standard handle, uses 3" x 11"<br />
ATD-9541<br />
ATD-9542<br />
ATD-9543<br />
sheets<br />
Aluminum base short gooseneck handle, uses 2-3/4" x<br />
8" sheets<br />
Economy model, masonite base, standard handle, uses<br />
2-3/4" x 17" sheets<br />
Aluminum base, flat/low profile handle uses 3" x 8" sheets<br />
ATD-9540<br />
Body Shop Tools<br />
& Equipment<br />
ATD-9541<br />
ATD-9542<br />
ATD-9543<br />
ATD-9547 16” Plastic Handle Sanding Board<br />
(Bordo para Lijado con 16” Manija Plástico)<br />
Features 2-3/4” x 16” aluminum base, flat/low profile handle. Uses<br />
2-3/4 x 17-1/2”sheets.<br />
ATD-9547<br />
MMM-05519 Sanding Block<br />
(Lijado Bloque)<br />
Pliable rubber block which holds sandpaper securely during wet or dry sanding.<br />
Uses a 2-3/4" x 9" sheet which is a 1/4 of a standard 9" x 11" sheet.<br />
Eliminates highlights in work from finger pressure.<br />
MMM-05519<br />
ATD-6801<br />
ATD-6801 200-Piece Box of 4" Spreaders<br />
(200 pzs. Caja de Esparcidor)<br />
High-quality and reusable. Designed for mixing and applying resins, fillers, compounds<br />
and gels. Made from non-absorbent polyethylene, so filler materials<br />
won’t stick. Once materials are dry, just twist to clean.<br />
595
WINDSHIELD <strong>TOOL</strong>S<br />
Body Shop Tools<br />
& Equipment<br />
ATD-6516<br />
KDT-2037<br />
KDT-2038<br />
KDT-2039<br />
KDT-3470<br />
LIS-47000<br />
ATD-6516 Deluxe Windshield Removing Tool<br />
(Removedor del Parabrisas de Lujo)<br />
Durable aluminum handle and steel cable pull tool. Cuts caulking compound around<br />
windshield fast and easy. Strong, tempered steel blade can be resharpened or<br />
replaced.<br />
ATD-6517<br />
Replacement Blade 6 per package<br />
KDT-2037 Chrysler Window Molding Remover<br />
(Removedor de Moldura de Ventana Chrysler)<br />
Removes clips and spreads rubber gasket on Chrysler windows. Rounded point<br />
spreads zipper type gaskets. Jaws firmly hold clips.<br />
KDT-2038 Window Molding Remover-GM, Ford, AMC<br />
(Removedor de Moldura de Ventana- GM, Ford, AMC)<br />
Removes window molding clips on GM, Ford and AMC cars. Place jaw flat against<br />
glass. Locate clips and roll them out with tip, keeping jaw flat to glass.<br />
KDT-2039 Windshield Wiper Arm Remover<br />
(Removedor de Brazo del Limpiaparabrisas)<br />
Removes wiper arms on most American cars. Protective pad on bottom jaw will not<br />
scratch painted surface. Place jaws between wiper arm and attachment and squeeze<br />
handles to remove.<br />
KDT-3470 Puller<br />
(Extractor)<br />
Remove rubber seals or weatherstripping. Pick out broken glass from window<br />
channels. Remove hog rings on seat covers. Pull cotter keys or snap rings.<br />
LIS-47000 Windshield Locking Strip Tool<br />
(Herramienta de Tira de Bloqueo del Parabrisas)<br />
Swivels 90˚ in either direction. Select the top with opening that most closely fits<br />
locking strip, and then feed locking strip into eyelet.<br />
SGT-87425 Braided Windshield Wire<br />
(Cable del Parabrisas)<br />
Especially designed to cut out urethanes. Seven stainless steel wires braided into one,<br />
giving you a saw-type action. Contains 72" of wire in a special dispenser package.<br />
SGT-87425<br />
596
WINDSHIELD <strong>TOOL</strong>S<br />
AST-1770 Air Windshield Remover Kit<br />
(Removedor de Parabrisas)<br />
• As a sealant cutter, cuts around bonded and encapsulated<br />
glass<br />
• Efficiently cleans and smoothes moldings after glass removal<br />
• Teasing throttle and regulator to provide easy speed control<br />
• Flexible blade mount can be positioned in 12 different ways<br />
(at 30° increments)<br />
• Rear exhaust directs air away from work<br />
• Blades included with tool:<br />
AST-17704 4"<br />
AST-17705 6"<br />
AST-17706 8"<br />
Body Shop Tools<br />
& Equipment<br />
SPECIFICATIONS:<br />
Oscillations (cycles) per Minute: 20,000<br />
Stroke Arc: 3<br />
Overall Length:<br />
8/203mm<br />
Net Weight:<br />
3lbs./1.36kg<br />
Air Inlet Thread NPT: 1/4”<br />
Air Hose I.D. Size<br />
3/8”/10mm<br />
Avg. Air Consumpt.:<br />
4cfm<br />
Air Pressure:<br />
90-120psi<br />
AST-1770<br />
AST-WINDK<br />
AST-WINDK Windshield Removal Tool Kit<br />
(Herramientas para Removedor de Parabrisas)<br />
Includes cutter tool and three blades (straight, bent and thin).<br />
Great for cutting window sealant and around bonded and<br />
encapsultated glass. Efficiently cleans and smooths moldings<br />
after glass removal. Teasing throttle and regulator provides<br />
easy speed control. (3 lbs.)<br />
AST-WINDK08E 57mm Bent Blade<br />
AST-WINDK08G 35mm Round Nose Blade<br />
AST-WINDK08H 52mm Bent Curved Blade<br />
Also available:<br />
AST-WINDK08A<br />
AST-WINDK08B<br />
AST-WINDK08C<br />
AST-WINDK08D<br />
AST-WINDK08F<br />
AST-WINDK08I<br />
AST-WINDK08J<br />
AST-WINDK08K<br />
AST-WINDK08L<br />
24mm Hook Blade<br />
36mm Hook Blade<br />
60mm Hook Blade<br />
90mm Hook Blade<br />
90mm Bent Blade<br />
48mm Scraper Blade<br />
35mm Flat-Nose Blade<br />
18mm Hook Blade<br />
35mm Serrated Blade<br />
597
WINDSHIELD <strong>TOOL</strong>S<br />
Body Shop Tools<br />
& Equipment<br />
URETHANE CUT OUT KNIVES<br />
• CUCHILLOS DE URETANOS •<br />
Features extra reach to cut hardened urethane down to dash line,<br />
heavy duty steel construction and cushion grip handle. (0.8 lbs)<br />
ATD-8562 18”<br />
ATD-8563 24"<br />
ATD-8533<br />
Replacement Blade<br />
AST-9038<br />
AST-9038<br />
AST-9039<br />
4-5/8" DIAMETER<br />
WINDSHIELD SUCTION CUPS<br />
• TAZAS DE SUCCIÓN DEL PARABRISAS •<br />
Single Suction Cup<br />
77 lb. Capacity (1 lb.)<br />
Dual Suction Cups<br />
154-lb. Capacity<br />
AST-9039<br />
MMM-08001<br />
MMM-08008<br />
MMM-08011<br />
MMM-08090<br />
MMM-08609<br />
MMM-08612<br />
MMM-08752<br />
MMM-08984<br />
SEALERS & ADHESIVES<br />
• SELLADORES Y ADHESIVOS •<br />
Tube 5 oz. Yellow Super Weatherstrip Adhesive<br />
Tube 5 oz. Black Super Weatherstrip Adhesive<br />
Tube 5 oz. Black Fast-Drying EPDM<br />
Weatherstrip Adhesive<br />
Can 18 oz. Yellow Super Trim Adhesive<br />
Cartridge 10 fl. Oz. Windo-Weld<br />
Super Fast Black Urethane<br />
Box (3/8" x 15') Black Windo-Weld<br />
Ribbon Sealer Kit<br />
Professional Strength Rearview Mirror<br />
Adhesive, .02 oz.<br />
1-Quart General Purpose Adhesive Cleaner<br />
598
UPHOLSTERY & PANEL CLIP <strong>TOOL</strong>S<br />
Body Shop Tools<br />
& Equipment<br />
ATD-8584<br />
AST-4505<br />
AST-4505 Trim Fastener & Molding Removal Set<br />
(Set para Remoción de Moldura & Asegurador de Bordes)<br />
Plastic tool set includes five different sizes and styles of tools that allow easy removal<br />
of trim fasteners, moldings and wheel hubs.<br />
ATD-8584 11-Piece Trim Removal Tool Set<br />
(11 pzs. Set de Removedores de Moluduras)<br />
Made of impact resistant plastic that will not mar surfaces. Includes wide-type<br />
remover, pull-type remover, handy remover, narrow-type remover, upholstery clip<br />
remover, angled clip panel remover, fork tip flat clip panel remover, clip panel<br />
remover, sharp tip flat clip panel remover, panel remover, and blunt tip flat clip panel<br />
remover.<br />
KDT-431 Door Handle and Window Crank Spring Tool<br />
(Manija De Puerta Y Herramienta Inestable<br />
Del Resorte De La Ventana)<br />
This tool pushes spring back just far enough to remove handle. Reverse end to<br />
remove door panels.<br />
KDT 431<br />
KDT-2822<br />
KDT-2822 Trim Pad Removing Tool<br />
(Removedor de Moluduras)<br />
Reaches behind trim panel on GM and other cars, grips plastic fastener & removes<br />
trim without damage.<br />
KDT-3786 4-Piece Body Trim Set<br />
(4 pzs. Set de Molduras Interior o Exterior)<br />
Includes 2 door panel removers, door handle and window lift tool, and door pad trim<br />
tool. Heavy-duty handle design with black oxide shanks.<br />
LIS-35060 Trim Panel Remover<br />
(Removedor de Moluduras)<br />
Removes hard-to-reach interior door panels and headliner clips.<br />
KDT-3786<br />
LIS-35150 Window Belt Molding Remover<br />
(Removedor de Moldurade Ventana)<br />
Quickly remove all window belt moldings in most domestic and import vehicles without<br />
damage to the window or the molding.<br />
LIS-35060<br />
LIS-35150<br />
599
UPHOLSTERY & PANEL CLIP <strong>TOOL</strong>S<br />
Body Shop Tools<br />
& Equipment<br />
LIS-35400<br />
LIS-63900<br />
VIM-DT6200<br />
MSC-ITCPPS<br />
THX-491<br />
LIS-35400 Door Upholstery Remover<br />
for Plastic Fasteners<br />
(Removedor de Tapicería de Puerta para Sujetadores Plásticos)<br />
Place the tool under the edge of the door panel and insert into fastener as far<br />
as possible...then simply pry up.<br />
LIS-63900 Window Holder<br />
(Retenedor de Ventana)<br />
Works on all cars and trucks. Simply loop cable over door frame and attach<br />
suction cups to each side of glass. Window glass is then securely held above<br />
the door while work is performed.<br />
MSC-ITCPPS 12-Piece Body Trim Set<br />
(Set de Moluduras Interior o Exterior)<br />
Use on trim fasteners and body moulding, inside or outside the vehicle. Includes<br />
12 different sizes and styles that allow easy removal of door panels, trim fasteners,<br />
mouldings, etc. Made of a durable, flexible plastic that minimizes panel<br />
damage. Also includes an additional metal clip tool.<br />
VIM-DT6200 5-Piece Master Upholstery Tool Set<br />
(5 pzs. Set de Herramientas para Tapicería)<br />
Remove any style of door panel clips, trim, molding, or emblems. Each tool is<br />
constructed high polished stainless steel with ergonomic handles.<br />
GM SPECIALTY <strong>TOOL</strong>S<br />
• HERRAMIENTAS ESPECIALIDAD DE GM •<br />
THX-491 GM Door Hinge Repair Kit<br />
(Kit para Reparación de Bisagra de la Puerta)<br />
For 1999 and up C Series and K Series GM trucks. Kit rebushes door hinge to<br />
save the work of replacing the door hinge assembly. Faster and easier than<br />
removing old hinge, grinding out spot welds, etc. Kit includes necessary hardware<br />
to rebush one hinge.<br />
TTN-15040 Door Spring Tool<br />
(Herramienta del Resorte de la Puerta)<br />
Designed to quickly and easily remove or install car door hinge springs and can<br />
be used with a 1/2" open end or ratcheting box wrench. Services GM cars and<br />
GM light duty trucks.<br />
TTN-15040<br />
600
DOOR <strong>TOOL</strong>S/PLASTIC REPAIR KITS<br />
KDT-3705<br />
KDT-3729<br />
KDT-3705 Panel Clip Plier<br />
(Alicates Del Clip Del Panel)<br />
The added support provided by the two-step design allows removal of panel<br />
clips without damaging the clip. Simply squeeze pliers to pop clips out.<br />
80°<br />
KDT-41850<br />
15°<br />
PANEL<br />
CLIP<br />
Body Shop Tools<br />
& Equipment<br />
KDT-3729 Push Pin Pliers<br />
(Alicates para Tachuela)<br />
Tool lifts center pin and pullsanchor in one step. Great for Honda, Toyota,<br />
GM, Ford, Chrysler and many other late model vehicles.<br />
80°<br />
KDT-41850 3-Piece Body Clip Set<br />
(3 pzs. Set de Pinzas para Carrocería)<br />
Includes 15° and 80° push pin pliers, plus panel clip plier for panel clips, J<br />
clips, or any fastener with no center pin.<br />
KDT-41840<br />
KDT-41840 2-Piece Push Pin Plier Set<br />
(2 pzs. Set de Alicates para Tachuelas)<br />
15° and 80° push pin pliers in one convenient set!<br />
15°<br />
.<br />
PLASTIC FASTENER REMOVERS<br />
• REMOVEDORES DE SUJETADORES PLÁSTICOS •<br />
LIS-35260 Plastic Fastener Remover<br />
(Removedor de Sujetador Plástico)<br />
Quickly removes various types of plastic fasteners that hold on weather<br />
stripping, radiator shrouds, fender linings, air dams and other plastic or rubber<br />
parts. The tool is equipped with a sliding urethane button for use when<br />
extra leverage is necessary.<br />
LIS-39600<br />
LIS-39600 Plastic Rivet Pliers<br />
(Alicates Plásticos Del Remache)<br />
Removes plastic panel fasteners. Angled pliers tips easily grip and remove<br />
plastic body fasteners. The pliers’ tips are open in the center so the fastener<br />
head won’t sever from the stem. Pliers can be rocked to remove stubborn<br />
fasteners.<br />
LIS-35260<br />
ATD-8579 Body Clip Pliers<br />
(Alicates de Grampa de Carrocería)<br />
Remove any clip found on trim, bumpers, etc. Features<br />
steel levers enclosed in plastic handles to prevent<br />
scratches and nicks in paint, and tips have special<br />
angle and size.<br />
ATD-8579<br />
601
DOOR <strong>TOOL</strong>S/PLASTIC REPAIR KITS<br />
Body Shop Tools<br />
& Equipment<br />
AST-4591<br />
TTN-11462<br />
TTN-11460<br />
TTN-11461<br />
MMM-08978<br />
SCRAPER, KNIFE, AND CLIP REMOVER <strong>SETS</strong><br />
• RASPADOR, CUCHILLO, Y SISTEMAS DEL REMOVEDOR DEL CLIP •<br />
AST-4591 3-Piece Stainless Steel Flexible Putty Knife Set<br />
(3 pzs. Set de Raspadores de Acero Inoxidable)<br />
• Includes 1.3", 2" and 3" stainless steel flexible putty knives<br />
• High carbon steel blade<br />
• Flexible blades are ideal for spreading plastic body filler<br />
TTN-11463 3-Piece Aviation Snips<br />
(3 pzs. Tijeras de Hojaletero Tipo Aviación)<br />
Cut cold rolled or stainless steel. These compound leverage cutters feature induction<br />
hardened, serrated blades, chrome-moly steel construction, and meet or exceed federal<br />
ANSI/ASME specifications.<br />
Individual Aviation Snips with Holster:<br />
TTN-11460 Straight Cut<br />
TTN-11461 Right Cut<br />
TTN-11462 Left Cut<br />
SIDE MOLDING AND EMBLEM REMOVAL <strong>TOOL</strong><br />
SYSTEM (S.M.A.R.T.)<br />
• SISTEMA LATERAL DE LA HERRAMIENTA DEL RETIRO DEL MOLDEADO<br />
Y DEL EMBLEMA (S.M.A.R.T.) •<br />
Saves time and money. Helps remove bonded moldings safely<br />
and effectively, even moldings reinforced with aluminum<br />
stripping. Plastic tool has a reinforced steel rod so it can be used<br />
with air chisels.<br />
MMM-08978<br />
Side Molding and Emblem<br />
Removal Tool Only<br />
MORE SCRAPERS?<br />
SEE PAGES 128-129<br />
602
MASKERS/HEAT LAMPS<br />
ATD-6561 18” Masking Machine<br />
(18 " Máquina para Enmascaramiento)<br />
Holds 2 paper rolls and 4 tape rolls. Features heavy-duty steel<br />
construction, large bottom tray and side tray for supplies, and<br />
large 8” tires.<br />
Body Shop Tools<br />
& Equipment<br />
ATD-6561<br />
ATD-6563 Tree Style Masking Machine<br />
(Estilo Del Árbol Máquina Para Enmascaramiento)<br />
Heavy-duty steel masker holds any 4 rolls of paper up to 18” wide,<br />
and never needs adjustment. 6” tires maneuver easily.<br />
ATD-6563<br />
INF-14-100<br />
INF-14-1000 Infrared Paint Curing Light<br />
(Pintura Infrarroja Que Cura La Luz)<br />
1500W light cures areas 2' x 3'—ideal for small repairs. New<br />
heavy-duty stand adjusts to over 6' high for curing hoods and<br />
roof lines. U.L. listed.<br />
INF-101065 Replacement Bulb<br />
603
PAINT GUN KITS<br />
Body Shop Tools<br />
& Equipment<br />
ATD-6900 9-Piece HVLP Spray Gun Set<br />
(9 pzs. Set de Rociadora HVLP)<br />
Everything you need to start painting! Kit includes 1.8mm primer gun, 1.4mm topcoat gun, and<br />
1.0mm touch-up gun, 0-180PSI regulator, 1L aluminum cups, 125cc stainless steel cup, face<br />
mask, and cleaning kit.<br />
ATD-6905 1.8mm HVLP Spray Paint Gun<br />
& 6” Random Orbital Palm Sander Primer Set<br />
(Set de Rociadora de Pintura de 1.8mm HVLP y 6” Lijadora Orbital al Azar de la Palma)<br />
Includes 1.8mm HVLP paint gun, 6” random orbital palm sander, locking air regulator with gauge, and paint<br />
gun maintenance & cleaning kit. Perfect set for general paint prep and painting.<br />
ATD-6925 HVLP Leonardo Paint Gun kit<br />
with 1.3mm, 1.4mm & 1.5mm Fluid Nozzles<br />
(Kit Del Arma De La Pintura De Leonardo De Hvlp Con Los Inyectores Del Líquido De<br />
1.3mm, De 1.4mm Y De 1.5mm)<br />
The Leonardo paint gun line is professional-grade and high quality, delivering a perfect 10”-11” fan spray with<br />
no gaps from a lightweight and balanced body. Features satin chrome finish and revolutionary design that<br />
requires only the nozzle cap to be changed for different spray patterns – no needle changes necessary!<br />
SHA-24A434 Finex Plus+ HVLP Spray Gun Kit<br />
(Kit de Rociadora HVLP de Finex Plus+)<br />
Includes 1.0 mm gun, 1.4mm gun, 1.2mm needle/nozzle kit, 1.8mm<br />
needle/nozzle kit, 3 interchangeable cups (125cc, 250cc, and<br />
600cc), cleaning brush, wrench, 2 filters, manual, and plastic case.<br />
604
PAINT GUNS & CUPS<br />
ATD-6910<br />
Body Shop Tools<br />
& Equipment<br />
ATD-6913<br />
ATD-6914<br />
ATD-6915<br />
ATD-6918<br />
LEONARDO PAINT GUNS<br />
• ROCIADORAS DE PINTURA LEONARDO •<br />
The Leonardo paint gun line is professional-grade and high quality, delivering a<br />
perfect 10”-11” fan spray with no gaps from a lightweight and balanced body.<br />
Features satin chrome finish and revolutionary design that requires only the nozzle<br />
cap to be changed for different spray patterns – no needle changes necessary!<br />
ATD-6910<br />
ATD-6914<br />
ATD-6915<br />
ATD-6918<br />
ATD-6929<br />
ATD-6872<br />
1.0mm HVLP Touch-up Gun<br />
1.4mm HVLP Spray Gun w/ 1-Liter Cup<br />
1.5mm HVLP Spray Gun w/ 1-Liter Cup<br />
1.8mm HVLP Spray Gun w/ 1-Liter Cup Nozzles<br />
Gun Trapper Filters for Leonardo Guns<br />
2.0mm Gravity Feed w/ 1-Liter Cup<br />
ATD-6872<br />
ATD-6822 Dripless Cup Assembly<br />
(Taza de Pintura sin )<br />
Dripless cup is a spun aluminum one-quart canister with aluminum cover.<br />
Fits all leading spray guns. Won’t drip when spraying in any position.<br />
Standard fluid connection. No accidental spills or damaged work. (.9 lbs.<br />
ATD-6863 Plastic Spray Cup<br />
(Taza de Pintura Plástica)<br />
Replacement cup for gravity feed spray guns.<br />
ATD-6822<br />
ATD-6863<br />
605
PAINT GUNS & CUPS<br />
Body Shop Tools<br />
& Equipment<br />
HVLP GRAVITY FEED SPRAY GUNS<br />
• PISTOLAS DE PINTURA ALIMENTADA<br />
POR GRAVEDAD HVLP •<br />
• Fast-working speed and wide spray fan pattern<br />
• Stainless steel needle and fluid tip for water base<br />
• Includes diaphragm regulator and aluminum cup<br />
AST-HVLPDX5 1.5mm<br />
AST-HVLPDX7 1.7mm<br />
AST-HVLPDX9 1.9mm<br />
AST-37401 Disposable Filters<br />
SHA-288885<br />
SHA-288879<br />
SHA-288880<br />
SHA-289200<br />
Finex Affordable<br />
Spray Guns by Sharpe<br />
(Rocidadoras Económicas FINEX<br />
creadas por Shape)<br />
Well-balanced and lightweight guns are<br />
designed to reduce painter fatigue. High-end<br />
features at an affordable price include durable<br />
aluminum cups, Sharpe quality and 1-year<br />
warranty, and ability to repair instead of<br />
replace entire gun.<br />
1-YEAR WARRANTY<br />
606<br />
FX200 FX100 FX300 FX300<br />
DESCRIPTION CONVENTIONAL MINI HVLP HVLP HVLP<br />
Tip 1.4mm 1.0mm 1.3mm 1.4mm<br />
CFM 11.9 4.9 11.4 11.4<br />
Capacity (Oz.) 24 14 24 24<br />
Air Inlet 1/4 MPT 1/4 MPT 1/4 MPT 1/4 MPT<br />
PSI 29 29 29 29<br />
SHA-288885 SHA-289200 SHA-288879 SHA-288880
PAINT GUNS & CUPS<br />
ATD-6810 1.8mm<br />
Suction Style Spray Gun<br />
(1.8mm Aspiración Estilo Pistola)<br />
Two-piece construction featuring exclusive air valve<br />
design, fully adjustable wide fan pattern control, onequart<br />
capacity dripless cup, and easy to clean design.<br />
Specifications:<br />
Operating Pressure: 45 - 60 psi<br />
Average Air Consumption: 6 - 9 CFM<br />
Air Inlet Thread: 1/4" NPT<br />
Required Compressor: 3 Hp<br />
Maximum Pattern @ 8" Distance:<br />
11" (3 lbs.)<br />
ATD-6843<br />
ATD-6844<br />
PRESSURE POTS WITH<br />
SPRAY GUN (1.0MM NOZZLE)<br />
& 5' HOSE (6 LBS)<br />
• •<br />
ATD-6843 Two Quart Pot<br />
ATD-6844 2.75 Quart Pot<br />
Body Shop Tools<br />
& Equipment<br />
TTN-19000 HVLP Gravity<br />
Feed 1.4-mm Spray Gun<br />
(Rociadora HLVP (Alto<br />
Volumen de Baja Presión)<br />
1.4mm Alimentada por<br />
Gravedad)<br />
• 5 - 43 psi Air Regulator<br />
• Brass Fluid & Air Nozzle<br />
• 600cc Plastic Paint Cup<br />
• Nozzle Size: 1/4”<br />
• Air Consumption: 1.6 - 4.0 CFM<br />
ATD-6812 1.0mm Suction<br />
Touch-Up Spray Gun<br />
(1.0mm Aspiración Retoque<br />
Pistola)<br />
Set contains touch-up gun and siphon<br />
cup. Gun operates at 30 - 50 psi, 4<br />
CFM at 50 psi. Professional quality for<br />
touch-up spraying, edging, shading or<br />
precision painting. Has 1/4" NPT (m)<br />
air inlet. The siphon cup has 8 oz.<br />
capacity.<br />
ATD-6849 Air Brush Kit<br />
(Kit de Rociador)<br />
Features double action trigger air-paint control with<br />
a precise machine fine nozzle. Nozzle: .3mm; air<br />
consumption: 15-30psi; cup capacity: 5C.C. Kit<br />
includes air brush, two glass jars, five foot air hose,<br />
an adapter and gun holder. (1.1 lbs.)<br />
ATD-6899 Undercoating Spray Gun<br />
(Arma del Mano Inferior del Aire)<br />
Air pressure: 43psi; Hose size; 3/8" id; air consumption<br />
8 cfm. (1.4 lbs.)<br />
ATD-6849<br />
ATD-6899<br />
607
SPRAY GUN ACCESSORIES<br />
Body Shop Tools<br />
& Equipment<br />
ATD-7812<br />
MOT-D12-2<br />
ATD-6848<br />
ATD-6618<br />
ATD-6848<br />
ATD-6618<br />
SPRAY GUN CLEANING KITS<br />
• KITS PARA LIMPIAR PISTOLAS DE PINTURA •<br />
20-Piece Paint Gun & Cup Cleaning Kit (1 lb)<br />
12-Piece Master Spray Gun Cleaning Kit (0.3 lbs)<br />
ATD-6861<br />
SPRAY GUN FILTERS<br />
• FILTROS PARA PISTOLA DE ROCÍO •<br />
Traps moisture, rust, scale and oil aerosols that pass through conventional filters. Air<br />
Inlet: 1/4" NPT; Air Outlet: 1/4" NPT.<br />
ATD-7812<br />
3-Piece Set<br />
MOT-D12-2 2-Piece Set<br />
GUN STANDS<br />
ª SOPORTES DE PISTOLA DE PINTURA •<br />
ATD-6805<br />
ATD-6861 Gravity Feed Spray Gun Holder—Metal Frame<br />
(Soporte de Pistola de Pintura Alimentada por Gravedad- Metal)<br />
Allows painter to fill gravity feed gun without assistance. Also a convenient holder for<br />
paint gun between jobs.<br />
ATD-6805 Magnetic Paint Gun Holder<br />
(Sostenedor Magnético Del Arma De La Pintura)<br />
Holds 2 gravity feed paint guns safely to toolboxes, carts, paint booths, prep stations,<br />
and more. Six powerful magnets assure a strong grip, yet make it completely portable.<br />
TTN-19991<br />
TTN-19991 Magnetic Spray Gun Holder<br />
(Sostenedor magnético del arma de aerosol)<br />
608<br />
SHA-8255<br />
Spray Gun Lube<br />
(Lubricante para<br />
Pistola de Pintura)<br />
Contains six 0.25 oz. tubes<br />
with pocket clips<br />
REUSABLE COVERALLS WITH<br />
VELCRO WRISTS AND ANKLES<br />
• SOBRETODOS REUTILIZABLES<br />
CON MUÑECAS Y TOBILLOS VELCROS •<br />
• Washable and reusable<br />
• This all purpose lightweight protective suit is<br />
easy to clean and lint free<br />
• Full zipper front, velcro sleeve fasteners, full<br />
hood, elastic waist and rear pocket<br />
• Comes in white nylon front, sleeves and hood<br />
and blue breathable cotton backside<br />
AST-4561<br />
Large<br />
AST-4562<br />
X-Large
PLASTIC/HEADLIGHT <strong>TOOL</strong>S<br />
SYM-75010010<br />
Body Shop Tools<br />
& Equipment<br />
2 YEARS AFTER<br />
PROTECTANT<br />
MAINTAINS<br />
CLEAR LENSES!<br />
SYM-75010030<br />
PLASTIC AND HEADLIGHT RESURFACER/PROTECTOR<br />
• RESTAURADOR/ PROTECTOR PARA PLÁSTICO Y LUZ DELANTERA •<br />
CLEANS, RESTORES, & PROTECTS:<br />
• Convertible top windows<br />
• Emergency light bars<br />
• Boat windshields<br />
• Other plastic products<br />
Eliminate the hazing and yellow from headlamps and obtain that “like new” appearance<br />
that lasts! Kit uses 3 easy steps and takes about 15 minutes to restore most headlamps.<br />
BEFORE...<br />
SYM-75010010 Single Treatment<br />
– treats lamps for one vehicle<br />
SYM-75010030 Pro Kit<br />
– treats up to 35 vehicles<br />
AFTER!<br />
HEADLIGHT <strong>TOOL</strong><br />
• HERRAMIENTA DE LUZ DELANTERA •<br />
LIS-14540 Ford Headlight Adjuster<br />
(Ajustador de Luz Delantera de Ford)<br />
Works on Ford aerodynamic headlights with rear mounted adjusters. The adjusters are<br />
not easily accessible and require this tool for adjusting. The extra long handle allows<br />
easy access to hard-to-reach spaces. Tool has a 4mm hex with a roller clutch for infinite<br />
settings.<br />
LIS-14540<br />
609
AIR CONTROL UNITS & REGULATORS<br />
Body Shop Tools<br />
& Equipment<br />
ATD-7865<br />
ATD-7866<br />
ATD-7867<br />
SHA-6730<br />
ATD-7865 4 Air Outlet General Purpose Air Control Unit<br />
(Unidad de Control de Aire de 4-Salientes)<br />
Pipe Size: 1/2"; Maximum SCFM: 50; Bowl Capacity: 9 oz.; Bowl Type: metal; 250 psig maximum<br />
pressure; (4) air outlets; 5 micron filter element; overnight automatic drain; (3) shut-off<br />
valves included.<br />
SHA-6950<br />
ATD-7866 6 Air Outlet General Purpose Air Control Unit<br />
(Unidad de Control de Aire de 6-Salientes)<br />
Pipe Size: 1/2"; Maximum SCFM: 100; Bowl Capacity: 9 oz.; Bowl Type: metal; 250 psig maximum<br />
pressure; (6) air outlets; 5 micron filter element; overnight automatic drain; (4) shut-off<br />
valves included.<br />
ATD-7867 Oil Removing Air Control Unit<br />
(Unidad de Control de Aire la Eliminación de Aceite)<br />
Pipe Size: 1/2"; Maximum SCFM: 100; Bowl Capacity: 9 oz.; Bowl Type: metal; 250 psig maximum<br />
pressure; 4 air outlets; .05 micron pre-filter; overnight automatic drain; (3) shut-off<br />
valves included. Features a .01 micron coalescing filter.<br />
SHA-6730 Two-Outlet Filtered Air Control Unit<br />
(Unidad de Control de Aire Filtrado de 2-Salientes)<br />
Two regulated outlets. One regulator with 160 lb. capacity inverted gauge and air cocks. One<br />
main line outlet with 200 lb. capacity gauge. Air inlet is 1/2” FPT. Filter capacity is 120 CFM<br />
and regulator capacity is 50 CFM.<br />
SHA-U06720<br />
SHA-6950 Filtered Air Unit<br />
(Unidad de Aire Filtrado)<br />
One regulator with 160 lb. gauge, additional regulated outlet, and filtered main line outlet<br />
included. Filter capacity is 75 CFM. Regulator capacity is 50 CFM. Air inlet 1/2” FPT.<br />
ATD-6752<br />
SHA-U06720 Air Control Unit<br />
(Unidad de Control de Aire)<br />
Filtration: 5 micron; Air Inlet: 1/2” npsm; Air Outlet: 1/4” npsm; 200 psi maximum pressure;<br />
120 CFM filter capacity; 50 CFM regulator capacity.<br />
AIR REGULATORS<br />
• REGULADORES DE AIRE •<br />
ATD-6752 1/4” Air Regulator<br />
(1/4” Regulador de Aire)<br />
Positive power control assures correct air pressure. Fits standard and heavy tools.<br />
ATD-6926 Leonardo Air Regulator<br />
(Regulador de Aire de Leonardo)<br />
Provides accurate air pressure regulation with a locking adjustment knob, which is perfect<br />
for use with the ATD Leonardo Paint Gun Line. Easy-to-Read 0-150 psi pressure gauge. 1/4"<br />
Fittings. 4.7 SCFM Max Flow.<br />
ATD-6926<br />
610
AIR CONTROL UNITS & REGULATORS<br />
ATD-7841<br />
ATD-7843<br />
ATD-7844<br />
Body Shop Tools<br />
& Equipment<br />
AIR REGULATORS WITH ADJUSTMENT KNOB<br />
• REGULADORES DE AIRE CON PERILLA DE AJUSTE •<br />
Operating Temperature: 40º-120º F; Adjustment Range: 5 to 125 psig. 1/8" NPT gauge port;<br />
pressure gauge included. Regulates air pressure of the air line. Self-relieving style units.<br />
Features three position non-rising knob - push to lock, pull to adjust, detach to make tamper<br />
resistant. T-handle also available.<br />
1/4” Mini Regulators<br />
(1/4” Mini Reguladores)<br />
25 SCFM maximum. Included 1/8” NPT gauge port.<br />
ATD-7841<br />
Die Cast Body<br />
ATD-7842<br />
Nylon Body<br />
SHA-1010<br />
ATD-7843 1/4" Standard Regulator<br />
(1/4” Regulador Estándar)<br />
50 SCFM maximum. Includes (2) 1/4” NPT gauge ports.<br />
SHA-1410<br />
ATD-7844 1/2" Standard Regulator<br />
(1/2” Regulador Estándar)<br />
50 SCFM maximum. Includes (2) 1/4” NPT gauge ports.<br />
AIR ADJUSTMENT VALVES<br />
• VÁLVULAS PARA AJUSTE DE AIRE •<br />
SHA-1010 Air Adjustment Valve<br />
(Válvula para Ajuste de Aire)<br />
Precision tapered valve. Full open to close with approximately 4 turns, infinitely adjustable.<br />
Large, easy to handle knob. Air inlet 1/4" NPT. Air outlet 1/4" FPT.<br />
SHA-1410 Diaphragm-style mini regulator. Lightweight, for any gun,<br />
push-pull lock pressure setting, 160-psi Gauge(0.4 lbs)<br />
SHA-3310 High volume air adjusting valve. For HVLP, 160-psi<br />
gauge(0.4 lbs)<br />
SHA-2210<br />
SHA-2210 Air Adjustment Valve with Gauge<br />
(Válvula para Ajuste de Aire con Indicador)<br />
Same as SHA-1010 with 0 to 160 psi gauge to adjust air pressure at spray gun. Air inlet<br />
1/4" NPT. Air outlet 1/4" FPT swivel fitting.<br />
ATD-6753<br />
ATD-6753 Air Control Gauge<br />
(Indicador para Control de Aire)<br />
Adjusts air pressure at the air tool. Ideal for spray guns to avoid costly painting errors such<br />
as poor color match, runs, poor coverage, orange peel, etc. With accurate 0 to 160 psi<br />
gauge. Air inlet 1/4" NPT. Air outlet 1/4" FPT and swivel fitting.<br />
611
AIR FILTERS<br />
Body Shop Tools<br />
& Equipment<br />
ATD-7817<br />
MOT-M30<br />
ATD-7817 In-Line Air Tool Filter<br />
(En la Línea de la Herramienta de Filtro de Aire)<br />
In-line filter protects air tools from dirt and debris and can be attached directly to<br />
pneumatic tools. 1-9/16" length, 1/2 oz. 40 micron sintered bronze element. 1/4" MPT<br />
and FPT.<br />
SUB-MICRONIC COMPRESSED AIR FILTERS<br />
Designed to remove oil, aerosols, condensed moisture, smoke, and essentially all rust<br />
and scale particles from compressed air lines. They’ll provide you with clean dry, oilfree<br />
air required for all critical applications, including clearcoat finishes.<br />
MOT-M60<br />
MOT-M30 1/4" NPT Sub-Micronic Compressed Air Filter<br />
Designed for hose or tubing on a remote bracket mount. 45 CFM maximum flow at 80<br />
PSI, 125 PSI maximum pressure. Removal rating of .01 microns. Replacement element<br />
MOT-M723.<br />
MOT-M60 1/2" NPT Sub-Micronic Compressed Air Filter<br />
Designed for direct in-line installation on rigid air lines. 100 CFM maximum flow at 80<br />
PSI, 125 PSI maximum pressure. Removal rating of .01 microns. Replacement element<br />
MOT-M723.<br />
MOT-M723 Replacement Element<br />
for M30 and M60 (4 pack)<br />
Roll of absorbent, high wet strength cellulose wound on a polyethylene core.<br />
MOT-M723<br />
612
AIR FILTERS<br />
SHA-8100<br />
Body Shop Tools<br />
& Equipment<br />
SHA-8100 Disposable In-Line Filter<br />
(Filtro Desechables En la Línea)<br />
Removes contaminates such as moisture and oil that condense in air hose.<br />
Helps reduce paint defects. (2 pack)<br />
SHA-8130 Air Filter (F88)<br />
(Filtro de Aire)<br />
Features reusable edge-type 10 micron filter element. Highly effective at<br />
removing water, oil and contamination. Air inlet 1/2" FPT. Air outlets 3/8" FPT<br />
and 1/4" FPT (plugged). Filter capacity 75 CFM. Traps 99% of all oil, water and<br />
contaminants.<br />
SHA-8135 Mechanic’s Air Filter (F88M)<br />
(Filtro de Aire del Mecánico)<br />
Designed for the mechanic who wants to protect his air tools from unfiltered<br />
shop air. Portable, mounts anywhere. Designed for use with quick couplers.<br />
Air inlet 1/4" FPT. Two 1/4" FPT air outlets (one plugged). 75 CFM capacity.<br />
SHA-6770 Dryaire Membrane-Style<br />
Air Drying System<br />
(Sistema de Aire Secado)<br />
OEM technology now available for shop use. Maintenance free: no refrigerants<br />
or desiccants to replace. Stage one filter removes water and contaminates<br />
down to five microns. Stage two coalescer removes oil and sub-micronic<br />
particles down to .01 microns. Filtering capacity 30 CFM up to 175 psi.<br />
Lightweight, easy to install, simple to operate.<br />
SHA-U06710 Air Filter<br />
(Filtro de Aire)<br />
Filtration: 5 micron; Air Inlet: 1/2” npsm; Air Outlet: 3/8” npsm; 200 psi maximum<br />
pressure; 120 CFM fiter capacity.<br />
SHA-8130<br />
SHA-6770<br />
SHA-8135<br />
SHA-U06710<br />
613
DESICCANT DRYING SYSTEMS<br />
Body Shop Tools<br />
& Equipment<br />
ATD-7820<br />
ATD-7820 Mini In-Line Disposable Desiccant Dryer<br />
(Mini Desecante Secadora Desechables En la Línea)<br />
1/4" NPT; maximum 15 CFM; maximum 125 psi. Ideal for spray guns (point-of-use).<br />
40 micron, porous bronze element removes fine dirt particles, as oil removing media<br />
removes oil vapor and desiccant beads adsorb water vapor. Attaches directly to spray<br />
gun or mini regulator located on spray gun. Unit is bi-directional with 1/4" NPT. Blue<br />
desiccant beads lower the dew point to -30º and remove all water vapor. Bead color<br />
turns pink when it is time to replace filter/dryer.<br />
ATD-7880<br />
ATD-7880 Two-Stage Economy Desiccant Dryer<br />
(Desecante Secadora Economía de 2-Etapa)<br />
• .03 Micron Oil REmoving Filter<br />
• 1-Quart Desiccant Dryer, Metal Bowl w/ Sight Glass<br />
• 15 sCFM Flow<br />
• Includes ball valve & brackets.<br />
ATD-78831 Filter Element Change Kit<br />
ATD-7888<br />
ATD-7772<br />
ATD-7771<br />
ATD-7888 5-Stage Extended Life Desiccant<br />
Air Drying System<br />
(Sistema de Desecante Secadora de Extendió la Vida de 5-Etapa)<br />
• Stage 1- 5 Micron Particulate Filter<br />
• Stage 2 - .01 Micron Oil Removing Filter<br />
• Stage 3 - 1- Gallon Desiccant Dryer, Metal Bowl w/ Sight Glass<br />
• Stage 4 - 3 Micron Absolute Filter (controls desiccant dust)<br />
• Stage 5 - Precision Regulator w/ Gauge<br />
• 30 sCFM Flow<br />
• Unit Includes Desiccant Charge, Ball Valve & Mounting Brackets<br />
ATD-78881 Filter Element Change Kit<br />
CLEAR ADVANTAGE FILTRATION SYSTEMS<br />
• SISTEMAS DE FILTRACIÓN DE CLEAR ADVANTAGE •<br />
ATD-7771 1 Qt. 30 SCFM Clear Advantage Unit<br />
(Unidad de Clear Advantage de 30 SCFM - Un Cuarto)<br />
1/2”npt, max pressure 120 psi (Important - recommended for maximum life to be<br />
used with refrigerated dryer.)<br />
ATD-77711 Replacement Cartridge<br />
ATD-7772 2 Qt. 35 SCFM Clear Advantage Unit<br />
(Unidad de Clear Advantage de 35 SCFM - Dos Cuarto)<br />
1/2”npt, max pressure 120 psi - 2 quart unit (Important - recommended<br />
to use when no refrigerated dryer is available.)<br />
ATD-77721 Replacement Cartridge<br />
614
DESICCANT DRYING SYSTEMS<br />
ATD-7889<br />
ATD-7889 Desiccant Dryer with 1 Gallon Bowl<br />
(Desecante Secadora con Taza de un Galón)<br />
• 30 sCFM Flow<br />
• 1-Gal. Desiccant capacity, metal bowl & sight glass<br />
SHA-6760<br />
ATD-7858<br />
Body Shop Tools<br />
& Equipment<br />
SHA-6760 Dryaire Desiccant System<br />
(Sistema de Desecante Secadora)<br />
The painter’s is insurance for removing dirt, water, oil and uncondensed moisture from<br />
compresssed air lines. Approved for paint company warranty programs. Stage one<br />
filter includes auto drain and five micron filter. Stage two coalescer with auto drain<br />
removes oil particles down to .01 microns. Stage three desiccant dryer has 30 CFM<br />
capacity. (31.1 lbs)<br />
1/2” PIPE COMBINATION UNITS<br />
• UNIDADES COMBINACIÓNES DE 1/2” TUBOS •<br />
ATD-7858 Standard Filter/Regulator Combination Unit<br />
(Unidad Combinación de Filtro/Regulador Estándar)<br />
Filter Element: 40 micron; Maximum SCFM: 100; Bowl Capacity: 6 oz.; Bowl Type:<br />
poly; manual drain; 250 psig maximum pressure; gauge included.<br />
ATD-7873<br />
ATD-7873 Filter/Regulator/Lubricator Modular Unit<br />
(Unidad Modular de DFiltro/ Regulador/Lubricador)<br />
Maximum SCFM: 100; Bowl Capacity: 6 oz.; Bowl Type: metal; manual drain; 250 psig<br />
maximum pressure. Units include a filter, regulator and lubricator and or filter, regulator,<br />
and oil removing filter. Gauge included.<br />
ATD-7886<br />
ATD-7887<br />
SHA-6765-1<br />
REPLACEMENT DESSICANTS<br />
• DESECANTES SUSTITUTOS •<br />
Quart<br />
Gallon<br />
5 lb. Jar<br />
ATD-7886<br />
ATD-7887<br />
SHA-6765-1<br />
615
6" 3M DA PAPER<br />
Body Shop Tools<br />
& Equipment<br />
MMM-01506<br />
MMM-01506 Stikit TM Green Fre-Cut TM Disc Roll<br />
(Disco de Fre-Cut TM Verde de Stikit TM )<br />
Stikit Green Discs are a more durable and longer lasting disc product. Pressure sensitive<br />
adhesive backing for easy application and come in roll form for easy dispensing from our<br />
Stikit Disc-Roll Dispensor MMM-05450. 100 discs per roll. 6" diameter. 80 grit.<br />
6" STIKIT TM PRODUCTION DISCS<br />
• 6” DISCOS DE PRODUCCIÓN STIKIT TM •<br />
Green Corps. Individually linered, pressure sensitive adhesive backed discs for quick application<br />
and removal to disc pad. All new mineral/bond construction and tough “E” weight<br />
backing provides for a fast cutting, long lasting abrasive.<br />
DISCS<br />
GRADE DIAMETER PER BOX BOXES/CASE<br />
MMM-01547 40E 6" x NH 100 5<br />
MMM-01551 36E 8" x NH 50 5<br />
6" STIKIT TM GOLD DISC ROLLS<br />
• 6” ROLLOS DISCOS DE OROS STIKIT TM •<br />
Stikit Discs are a more durable and longer lasting disc product. They come in a roll form for<br />
use with the MMM-05450 Dispenser, and are available in “A” weight in a full range of grits.<br />
Discs have a pressure sensitive adhesive backing for easy application and removal. 175<br />
discs per roll. 6" Diameter.<br />
GRADE<br />
MMM-01435 P320 6<br />
MMM-01437 P240 6<br />
MMM-01439 P180 6<br />
ROLLS/CASE<br />
616
6" 3M DA PAPER<br />
HOOKIT TM II SOFT INTERFACE PADS<br />
• ALMOHADILLAS DE HOOKIT TM II •<br />
• Constructed of a soft durable foam<br />
• When used with a standard Hookit II backup pad it increases conformability,<br />
allowing the technician to follow contours and get in closer to most edges.<br />
FOR USE<br />
QUANTITY<br />
WITH DISC SIZE<br />
PER CASE<br />
MMM-05273 5" diameter 10<br />
HOOKIT TM II DISC PADS<br />
• ALMOHADILLAS DE DISCOS HOOKIT TM II •<br />
• Specifically made to use with the Hookit II discs<br />
• Pad face securely hold the discs yet allows for easy change and reattachment<br />
of discs<br />
• Lightweight, shock-resistant and well-balanced<br />
• Tough, durable plastic hub and conformable foam body are designed for a maximum<br />
operating speed of 12,000 RPM.<br />
• Note PN05251 is a Primer Finishing Pad. PN05286 is a Painter’s Pad.<br />
FOR USE<br />
QUANTITY<br />
WITH DISC SIZE<br />
PER CASE<br />
MMM-05251 6" Primer Finishing Pad 10<br />
MMM-05275 5" diameter 10<br />
MMM-05276 6" diameter 10<br />
MMM-05286 6" Painter’s Pad 10<br />
MMM-05273<br />
Body Shop Tools<br />
& Equipment<br />
HOOKIT TM II FINISHING FILM DISCS<br />
• DISCOS REFINAMIENTO DE CINTA HOOKIT TM II •<br />
Use to level minor dust nibs and for light sanding of mismatched orange peel on<br />
all automotive paints.<br />
GRADE<br />
QUANTITY/BOX<br />
MMM-00850 P1500 50<br />
MMM-00868 P1200 50<br />
MMM-00869 P1000 50<br />
MMM-00870 P800 50<br />
MMM-00871 P600 50<br />
IMPERIAL TM HOOKIT TM<br />
II FILM DISCS<br />
• DISCOS DE CINTA HOOKIT TM II •<br />
Use for fine featheredging or last final sanding step before priming.<br />
GRADE<br />
QUANTITY/BOX<br />
MMM-00672 P500 50<br />
MMM-00673 P400 50<br />
MMM-00675 P320 50<br />
MMM-00678 P220 50<br />
MMM-00679 P180 50<br />
MMM-00680 P150 50<br />
MMM-00681 P120 50<br />
MMM-00682 P100 50<br />
MMM-00683 P80 50<br />
617
ABRASIVE DISCS & SHEETS<br />
Body Shop Tools<br />
& Equipment<br />
GREEN CORPS TM ROLOC TM GRINDING DISCS<br />
• DISCOS AFILADOS DE ROLOC TM GREEN CORPS TM •<br />
A handy quick-change tool for disc grinding which fits any standard 1/4" drill or air<br />
tool. A quick 1/2 turn on, 1/2 turn off speeds disc changing. Discs are color coded.<br />
Grit can be determined by the color of the plastic holding button. 25 discs per box.<br />
3" DIAMETER 2" DIAMETER GRADE DISCS/BOX<br />
MMM-01406 MMM-01396 50 25<br />
MMM-01407 MMM-01397 36 25<br />
MMM-01408 MMM-01398 24 25<br />
GREEN CORPS TM FIBRE DISCS<br />
• DISCOS DE FIBRAS GREEN CORPS TM •<br />
Green Corps. All purpose grinding disc for door skinning, grinding MIG welds or for<br />
any kind of metal grinding. These discs are long lasting and fast cutting. 20 discs<br />
per box. Five boxes per case.<br />
GRADE<br />
SIZE<br />
MMM-01913 50 5" x 7/8"<br />
MMM-01914 36 5" x 7/8"<br />
MMM-01915 24 5" x 7/8"<br />
MMM-01921 50 7" x 7/8"<br />
MMM-01922 36 7" x 7/8"<br />
MMM-01923 24 7" x 7/8"<br />
MMM-01819<br />
COATED ABRASIVE GRINDING DISC<br />
• DISCO AFILADO DE ABRASIVO RECUBIERTOS •<br />
Designed for paint removal and metal work. Open coat construction helps to reduce<br />
loading on acrylics. 25 discs per box.<br />
GRADE<br />
SIZE<br />
MMM-01819 24 5” X 7/8”<br />
MMM-01411<br />
MMM-01411 Roloc Brake Rotor Surface<br />
Conditioning Disc Refill Pack<br />
(Paquete de Discos para Acondicionado de<br />
Superficie de Disco del Freno)<br />
Premium 120 grit 3M Roloc disc designed to create a non-directional scratch<br />
pattern on brake rotor surfaces after turning. Includes twelve in a pack.<br />
618
ABRASIVE DISCS & SHEETS<br />
6” GOLD DISC<br />
• 6” DISCO DE ORO •<br />
Dry sanding only. A sharp mineral to cut through tough surfaces faster. Resists<br />
dulling, loading and edge wear.<br />
GRADE DISCS/BOX<br />
MMM-01035 P320 100<br />
IMPERIAL TM WETORDRY TM COLOR<br />
SANDING PAPER SHEETS 5-1/2" X 9"<br />
• HOJAS DE LIJADORAS DE 5-1/2" X 9" WETORDRY TM IMPERIAL TM •<br />
Designed for light sanding prior to compounding.<br />
SHEETS GRADE SLEEVES/CASE<br />
MMM-02021 50 Ultra Fine 1000 5<br />
MMM-02022 50 Micro Fine 1200 5<br />
MMM-02023 50 Micro Fine 1500 5<br />
MMM-02044 50 Micro Fine 2000 5<br />
IMPERIAL TM WETORDRY TM COLOR<br />
SANDING PAPER SHEETS 9" X 11"<br />
• HOJAS DE LIJADORAS DE 9" X 11" WETORDRY TM IMPERIAL TM •<br />
• Premium, aluminum oxide mineral, an improved paper backing and an optimized<br />
construction<br />
• Performance advantages: Improved rate of cut, increased abrasive life, increased<br />
flexibility, and uniform, consistent finish<br />
SHEETS/ SLEEVES/<br />
GRADE SLEEVE CASE<br />
MMM-02043 P220 50<br />
MMM-02042 P240 50<br />
MMM-02040 P320 50<br />
MMM-02038 P400 50<br />
MMM-02037 P500 50<br />
MMM-02036 P600 50<br />
MMM-02035 P800 50<br />
MMM-02034 Ultra Fine 1000 50 5<br />
MMM-02032 Micro Fine 1500 50 5<br />
MMM-01035<br />
Body Shop Tools<br />
& Equipment<br />
619
<strong>BODY</strong> SHOP ABRASIVES<br />
Body Shop Tools<br />
& Equipment<br />
WETORDRY TM SHEETS 9” X 11”<br />
• HOJAS DE 9" X 11" WETORDRY TM •<br />
Use wet or dry for sanding old finishes, fine featheredging plus surface work. It is a silicon<br />
carbide, closed coat product bonded with a waterproof resin.<br />
SHEETS/ SLEEVES/<br />
GRADE SLEEVE CASE<br />
MMM-02016 120 50 5<br />
MMM-02018 80 50 5<br />
PAPER SHEETS<br />
• HOJAS DE PAPEL •<br />
Dry sanding only by machine or hand on fiberglass, wood or metal. Open coat with<br />
tough aluminum oxide mineral.<br />
SHEETS/ SLEEVES/<br />
GRADE SIZE SLEEVE CASE<br />
MMM-02115 80D 9“ X 11” 50 10<br />
MMM-02118 40D 9“ X 11” 50 5<br />
MMM-02135 80D 2-3/4“ X 17-1/2” 100 10<br />
MMM-02138 40D 2-3/4“ X 17-1/2” 100 5<br />
PRODUCTION SHEETS<br />
• HOJAS DE PRODUCTION •<br />
Use for shaping plastic filler, removing paint around damaged area and scratch refinement<br />
of bare metal. For non-critical, short-term application.<br />
SHEETS/<br />
GRADE SIZE BOX CASE<br />
MMM-02145 80D 3” X 8” 200 10<br />
MMM-02175 80D 3-2/3” X 9” 200 10<br />
BOXES/<br />
620
<strong>BODY</strong> SHOP ABRASIVES<br />
IMPERIAL TM HOOKIT TM II<br />
2-3/4" X 16-1/2" PURPLE SHEETS<br />
• HOJAS MORADAS DE 2-3/4” X 16-1/2” DE HOOKIT TM II DE IMPERIAL TM •<br />
3M’s Hook ‘N Loop system has been reversed. The hooks are now on the back of the<br />
abrasive and the loops are on the front of the accessory. This results in less shifting of<br />
the abrasive during sanding, longer accessory and abrasive life and easier removal of<br />
discs.<br />
GRADE<br />
QUANTITY/BOX<br />
MMM-00799 P120E 25<br />
MMM-00800 P100E 25<br />
MMM-00801 P80E 25<br />
MMM-00802 P40E 25<br />
MMM-00803 P36E 25<br />
Body Shop Tools<br />
& Equipment<br />
GREEN CORPS TM HOOKIT TM REGALITE TM SHEET<br />
• HOJA DE REGALITE TM HOOKIT TM DE GREEN CORPS TM •<br />
Convenient hook and loop attachment system for easy placement and removal.<br />
Special mineral coating bonded to a double “E” weight backing is designed to last<br />
longer and cut faster when shaping plastic filler by hand or machine.<br />
SHEETS/<br />
GRADE SIZE BOX CASE<br />
MMM-00539 80E 2-3/4" x 16-1/2" 50 5<br />
BOXES/<br />
MMM-00539<br />
GREEN CORPS TM PRODUCTION TM SHEETS<br />
• HOJAS DE PRODUCTION TM DE GREEN CORPS TM •<br />
Excellent for intermediate sanding, shaping and fairing of boat hulls. Tough mineral<br />
bond construction along with special treatment to resist loading means long-lasting,<br />
fast-cutting abrasive.<br />
SHEETS/ BOXES/<br />
GRADE SIZE BOX CASE<br />
MMM-02220 80D 2-3/4" x 17-1/2" 100 5<br />
MMM-02225 80D 3-2/3”" x 9" 100 10<br />
GREEN CORPS TM STIKIT TM SHEET<br />
• HOJA DE STIKIT TM DE GREEN CORPS TM •<br />
A pressure-sensitive adhesive backing for easy application to and removal from tool<br />
face. Special mineral coating plus improved mineral bond provides for fast cutting<br />
abrasive life.<br />
SHEETS/ BOXES/<br />
GRADE SIZE BOX CASE<br />
MMM-02230 80D 2-3/4" x 16-1/2" 100 5<br />
MMM-02230<br />
621
ABRASIVE ROLLS & HAND BLOCKS<br />
Body Shop Tools<br />
& Equipment<br />
CRYSTAL BAY EMERY & CROCUS CLOTH SHEETS<br />
• HOJAS DE TELAS EMERY Y CROCUS CRYSTAL BAY TM •<br />
Emery cloth is used for general purpose metal sanding, light clean-up work and rust<br />
removal jobs. Crocus cloth is purely a polishing medium for use on metal surfaces. 50<br />
sheets per sleeve.<br />
SLEEVES/<br />
GRADE SIZE CASE<br />
MMM-02431 Fine 9" x 11" 5<br />
MMM-02432 Medium 9" x 11" 5<br />
MMM-02433 Coarse 9" x 11" 5<br />
CLOTH UTILITY ROLLS<br />
• ROLLOS UTILIDADES DE TELA •<br />
Use for general purpose metal working. For light deburring, clean-up, blending and finishing<br />
metal surfaces.<br />
GRADE SIZE ROLLS/CASE<br />
MMM-05002 320J 1” X 50 yds. 5<br />
MMM-05004 240J 1” X 50 yds. 5<br />
MMM-05005 220J 1” X 50 yds. 5<br />
MMM-05006 180J 1” X 50 yds. 5<br />
MMM-05007 150J 1” X 50 yds. 5<br />
MMM-05008 120J 1” X 50 yds. 5<br />
MMM-05010 80J 1” X 50 yds. 5<br />
MMM-05024 240J 1-1/2”” X 50 yds. 5<br />
MMM-05026 180J 1-1/2”” X 50 yds. 5<br />
MMM-05028 120J 1-1/2”” X 50 yds. 5<br />
MMM-05030 80J 1-1/2”” X 50 yds. 5<br />
MMM-03130 Auto Pak TM Abrasive Cloth Sanding Roll<br />
(Rollo de Lijador de Abrasivo Auto Pak TM )<br />
Tough, flexible cloth backing for sanding hard-to-reach areas. Long-lasting, fast cutting.<br />
Use for de-burring and metal finishing.<br />
MMM-03130<br />
622
ABRASIVE ROLLS & HAND BLOCKS<br />
HOOKIT TM II HAND BLOCKS<br />
• BLOQUES MANUAL DE HOOKIT TM II •<br />
• Made of a sturdy, durable high-strength material to fit the hand comfortably<br />
• Embossed Hookit face for use with our new Hookit II sheets<br />
• MMM-5240 is designed to use one-third of a Hookit II sheet while MMM-5241<br />
uses one-half of a Hookit II sheet.<br />
MMM-05240 2-3/4" x 5"<br />
MMM-05241 2-3/4" x 7-3/4"<br />
MMM-05240<br />
MMM-05241<br />
Body Shop Tools<br />
& Equipment<br />
MMM-05242 Hookit II Soft Hand Block<br />
(Bloque Manual de Hookit TM II)<br />
• Made of a tough, flexible foam for block sanding flat and contoured areas.<br />
• Hookit II face provides positive attachment of Hookit II sheets<br />
• Allows easy change and reattachment. Size 2-3/4" x 5"<br />
MMM-05242<br />
MMM-05244 Hookit II Hand File Board<br />
(Bordo para Fichar Manual de Hookit TM II)<br />
• A well-balanced, durable shop too. 2-3/4" x 16"<br />
• Resistant to most solvents<br />
• Sturdy design provides a non-twisting flat sanding surface<br />
• Embossed Hookit II face allows easy attachment<br />
and removal of our Hookit II file sheets.<br />
MMM-05244<br />
623
JOB PACKED ABRASIVES<br />
Body Shop Tools<br />
& Equipment<br />
PROFESSIONAL JOB-PACKED ABRASIVES<br />
• ABRASIVOS PROFESIONALES<br />
• 3M Professional Abrasives now available in smaller, job-size quantities.<br />
• For the jobber: No need to open boxes to sell single sheets. Easier to display inventory<br />
and sell.<br />
• For the user: No need to buy full boxes to get the professional quality product.<br />
Buying by the pack makes it easier to buy, easier to store and reduces inventory<br />
costs.<br />
• To convert the job-packed part number to the bulk-packed part number, simply substitute<br />
a “0” for the “3” at the beginning of the 5-digit part number.<br />
• The product descriptions are listed under the bulk-packed products.<br />
GREEN CORPS TM ROLOC TM GRINDING DISCS<br />
• DISCOS AFILADOS DE ROLOC TM GREEN CORPS TM •<br />
Generally used for hard to reach areas in paint, rust, and weld removal. Handy quick<br />
change tool for disc grinding which fits any standard 1/4” drill or air tool.<br />
DISCS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-31407 3" Diameter 36 5 10<br />
MMM-31408 3" Diameter 24 5 10<br />
STIKIT TM GOLD DISCS<br />
• DISCOS DE OROS STIKIT TM •<br />
Use for fine featheredging or last final sanding step before priming.<br />
DISCS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-31434 6" Diameter P400 5 10<br />
MMM-31435 6" Diameter P320 5 10<br />
MMM-31438 6" Diameter P220 5 10<br />
MMM-31439 6" Diameter P180 5 10<br />
MMM-31441 6" Diameter P120 5 10<br />
MMM-31442 6" Diameter P100 5 10<br />
MMM-31443 6" Diameter P80 5 10<br />
624
JOB PACKED ABRASIVES<br />
STIKIT TM GREEN FRE-CUT TM DISC<br />
• DISCO DE FRE-CUT TM VERDE DE STIKIT TM •<br />
Use for shaping plastic filler, removing paint around damaged area and scratch refinement<br />
of bare metal.<br />
DISCS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-31506 6" Diameter 80D 5 10<br />
MMM-31506<br />
Body Shop Tools<br />
& Equipment<br />
GREEN CORPS TM STIKIT TM PRODUCTION DISCS<br />
• DISCOS DE PRODUCCIÓN STIKIT TM GREEN CORPS TM •<br />
Use for stripping paint to metal, shaping and sanding plastic filler. Individually linered<br />
discs.<br />
DISCS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-31547 6" Diameter 40E 5 10<br />
MMM-31548 6" Diameter 36E 5 10<br />
MMM-31550 8" Diameter 40E 5 10<br />
MMM-31551 8" Diameter 36E 5 10<br />
GREEN CORPS TM STIKIT TM PRODUCTION<br />
FRE-CUT TM DISCS<br />
DISCOS DE PRODUCCIÓN FRE-CUT TM DE STIKIT TM GREEN CORPS TM •<br />
Use for removal of coarser grade scratches in body filler and scratch refinement of bare<br />
metal. Disc has dry lubricant coating to extend disc life by resisting loading.<br />
DISCS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-31549 8" Diameter 80D 5 10<br />
GREEN CORPS TM FIBRE DISCS<br />
• DISCOS DE FIBRAS GREEN CORPS TM •<br />
Use for grinding door skins, MIG welds or any kind of metal or fiberglass grinding. Other<br />
applications include paint, rust, and weld removal and metal work. 3Ms standard class<br />
abrasive.<br />
DISCS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-31914 5" x 7/8" 36 2 10<br />
MMM-31915 5" x 7/8" 24 2 10<br />
MMM-31922 7" x 7/8" 36 2 10<br />
MMM-31923 7" x 7/8" 24 2 10<br />
MMM-31549<br />
625
JOB PACKED ABRASIVES<br />
Body Shop Tools<br />
& Equipment<br />
IMPERIAL TM WETORDRY TM COLOR SANDING PAPER SHEETS<br />
• HOJAS DE LIJADORAS DE WETORDRY TM IMPERIAL TM •<br />
Designed for light sanding prior to compounding.<br />
SHEETS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-32021 9" x 11" 1000 UF 5 10<br />
MMM-32022 9" x 11" 1200 MF 5 10<br />
MMM-32023 9" x 11" 500 MF 5 10<br />
MMM-32044 9" x 11" 2000 MF 5 10<br />
IMPERIAL TM WETORDRY TM PAPER SHEETS<br />
• HOJAS DE LIJADORAS DE WETORDRY TM IMPERIAL TM •<br />
Use in wet sanding, use for scuffing the blend area prior to painting. Most flexible backing with<br />
more consistant scratch pattern make this 3M`s best wet sanding product.<br />
SHEETS/<br />
SIZE GRADE PACK CASE<br />
MMM-32035 9" x 11" P800 5 10<br />
MMM-32036 9" x 11" P600 5 10<br />
MMM-32038 9" x 11" P400 5 10<br />
MMM-32039 9" x 11" P360 5 10<br />
MMM-32040 9" x 11" P320 5 10<br />
MMM-32042 9" x 11" P240 5 10<br />
MMM-32043 9" x 11" P220 5 10<br />
PACKS/<br />
GREEN CORPS TM PRODUCTION TM PAPER SHEETS<br />
• HOJAS DE PRODUCTION TM DE GREEN CORPS TM •<br />
Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare<br />
metal.<br />
SHEETS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-32220 2-3/4" x 17-1/2" 80D 5 10<br />
MMM-32221 2-3/4" x 17-1/2" 40E 5 10<br />
MMM-32222 2-3/4" x 17-1/2" 36E 5 10<br />
GREEN CORPS TM STIKIT TM PRODUCTION TM SHEETS<br />
• HOJAS DE STIKIT TM DE GREEN CORPS TM •<br />
Used for stripping paint to metal, shaping and sanding plastic filler.<br />
SHEETS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-32230 2-3/4" x 16-1/2" 80D 5 10<br />
MMM-32231 2-3/4" x 16-1/2" 40E 5 10<br />
MMM-32232 2-3/4" x 16-1/2" 36E 5 10<br />
626
JOB PACKED ABRASIVES<br />
PRODUCTION TM FRE-CUT TM GOLD PAPER SHEETS<br />
• HOJASDE OROS DE FRE-CUT TM DE PRODUCTION TM •<br />
9" x 11" - 5 sheets per pack. Use for for rough featheredging.<br />
PACKS/<br />
GRADE<br />
CASE<br />
MMM-32541 320A 10<br />
MMM-32544 220A 10<br />
MMM-32545 180A 10<br />
Body Shop Tools<br />
& Equipment<br />
SCOTCH-BRITE TM PADS<br />
• ALMOHADILLAS DE SCOTCH-BRITE TM •<br />
Use for cleaning, scuffing, deburring and finishing by hand with water or solvents. Will never rust.<br />
QUANTITY/<br />
PACK<br />
MMM-37447 3 General Purpose<br />
MMM-37448 3 Ultra Fine<br />
PRODUCTION TMTM SHEETS<br />
• HOJAS DE PRODUCTION TM •<br />
Dry sanding only on machine or by hand. Used for finishing plastic filler and scratch refinement of<br />
bare metal. For non-critical, short-term application.<br />
SHEETS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-32115 9” X 11” 80D 5 20<br />
MMM-32118 9” X 11” 40D 5 20<br />
MMM-07441 Scotch-Brite General Purpose Scuff Sponge<br />
(Esponja de Scotch-Brite para Uso General)<br />
Ideal for scuffing/cleaning a variety of marine surfaces. Sponges may be used wet or dry. Handheld<br />
size offers convenience, comfort, and reduses waste. (10 sponges per bag)<br />
MMM-07441<br />
627
AUTO PAK TM<br />
SANDING PRODUCTS<br />
Body Shop Tools<br />
& Equipment<br />
MMM-03010<br />
ALUMINUM OXIDE AUTOMOTIVE SANDPAPER<br />
• PAPELES PARA LIJAR DE ÓXIDO ALUMINIO •<br />
Ideal for hand or machine sanding. For use on metal, plastic body filler and fiberglass.<br />
Contains sandpaper made with aluminum oxide mineral, a tough and versatile synthetic<br />
abrasive.<br />
SHEETS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-03004 9” X 11” Fine 3 40<br />
MMM-03005 9” X 11” Medium 3 40<br />
MMM-03007 9” X 11” Coarse 3 40<br />
MMM-03031 3-2/3” X 9” Fine 6 40<br />
MMM-03035 3-2/3” X 9” Medium 6 40<br />
MMM-03038 3-2/3” X 9” Coarse 5 40<br />
EMERY TM CLOTH SHEETS<br />
• HOJAS DE TELAS EMERY TM •<br />
Designed for rust and corrosion removal or metal sanding. Cloth backing makes it strong and<br />
durable. Use for deburring and preparing metal surfaces.<br />
SHEETS/<br />
SIZE PACK CASE<br />
MMM-03010 9” X 11” 3 20<br />
PACKS/<br />
WETORDRY TM SANDPAPER<br />
• PAPELES PARA LIJAR WETORDRY TM •<br />
Waterproof for wet sanding by hand. Excellent for sanding primed surfaces, removing orange<br />
peel, dust nibs and light sagging of the top coat. Used on metal, plastic, body filler and fiberglass<br />
surfaces.<br />
SHEETS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-03013 9” X 11” P1000 4 40<br />
MMM-03015 9” X 11” P400 4 40<br />
MMM-03017 9” X 11” P440 4 40<br />
MMM-03019 9” X 11” P220 4 40<br />
MMM-03021 9” X 11” Assorted 4 40<br />
ADHESIVE BACKED SANDING DISCS<br />
• DISCOS DE LIJADORA CON SOPORTES ADHESIVOS •<br />
Adhesive backing makes sanding easy and convenient, just press the disc on the pad and<br />
sand. The disc peels off easily when the job is done. Long-lasting tough mineral resists loading.<br />
DISCS/ PACKS/<br />
SIZE GRADE PACK CASE<br />
MMM-03110 5” Fine 4 40<br />
MMM-03111 5” Medium 4 40<br />
MMM-03112 5” Coarse 4 40<br />
MMM-03148 Rubber Sanding Block<br />
(Bloque de Lijadora Caucha)<br />
Made of pliable rubber for easy, fast sanding. 2-3/4” X 5” (10 per case)<br />
MMM-03171 4” Rust and Paint Stripper<br />
(4” Despegar de Roya y Pintura)<br />
A one-piece stripper, with a built-in mandrel, that quickly removes rust, scale, old paint and<br />
grime from metal surfaces. It is made of a synthetic material that molds to any surface and<br />
won't rust or splinter like wire brushes. (24 packs per case)<br />
MMM-03148<br />
MMM-03171<br />
628
SANDING ACCESSORIES<br />
MMM-05530 STIKIT TM Soft Hand Pad<br />
(Almohadilla Suave de Mano de STIKIT TM )<br />
For use with Stikit Sheet Rolls and Imperial color sanding paper sheets. Provides a soft<br />
controlled touch. Eliminates finger marks and edge cutting into primer and paint. Ideal for<br />
contour and light scuff sanding.<br />
Body Shop Tools<br />
& Equipment<br />
STIKIT TM DISC PADS<br />
• ALMOHADILLAS DE STIKIT TM •<br />
Specially made for use with Stikit discs. The vinyl pad face provides good disc adhesion yet<br />
allows easy disc removal. Lightweight, shock resistant and well balanced. Made with a tough,<br />
durable hub and a comfortable foam body.<br />
MAX OPERATING<br />
DISC SIZE SPEED FITS<br />
MMM-05576 For 6" discs 10,000 rpm Any 6" DA Sander<br />
MMM-05530<br />
STIKIT TM HAND BLOCKS<br />
• BLOQUES DE STIKIT TM •<br />
Made of a sturdy, durable, high strength material. Shaped to fit the hand comfortably. Blocks<br />
have an embossed rubber face which allows good adhesion for Stikit sheet-rolls and Stikit<br />
production sheets.<br />
MMM-05442<br />
2-3/4" x 5". Made of tough flexible foam.<br />
MMM-05576<br />
MMM-05248 2-3/4” x 16” Hookit II Air File Shoe<br />
(Zapato de Archivo de Aire de Hookit TM II)<br />
Designed for use on all straight air files with Hookit II file sheets. The Hookit II face<br />
allows easy attachment and removal of Hookit II sheets while eliminating the need for<br />
mechanical clips.<br />
MMM-05442<br />
SCOTCH-BRITE TM HAND PADS<br />
• ALMOHADILLAS DE SCOTCH-BRITE TM •<br />
For scuffing before applying paint and Primer-Surfacer. For used car reconditioning, cleaning<br />
upholstery, headliners, doorpads, chrome and cleaning of white wall tires. Made of nylon web<br />
- rinse clean - can be used over and over again.<br />
APPLICATION PADS/BOX COLOR<br />
MMM-07447 General Purpose 20 Maroon<br />
MMM-07448 Ultra Fine 20 Gray<br />
MMM-05248<br />
MMM-07447<br />
MMM-07448<br />
629
<strong>BODY</strong> REPAIR TAPE<br />
Body Shop Tools<br />
& Equipment<br />
MMM-06297<br />
SCOTCH ® AUTOMOTIVE REFINISH MASKING<br />
TAPE # 233+<br />
• CINTAS PARA ENMASCARAR - NUMERO 233+ •<br />
Designed expressly for the professional auto refinish painter. Conformable, hugs<br />
curves and contours. Sticks at a touch and stays put. Available by the sleeve.<br />
SIZE<br />
ROLLS /CASE<br />
MMM-26330 1/4" x 60 yds. Bulk 96<br />
MMM-26332 1/2" x 60 yds. Bulk 48<br />
MMM-26334 3/4" x 60 yds. Bulk 48<br />
MMM-26336 1" x 60 yds. Bulk 24<br />
MMM-26338 1-1/2" x 60 yds. Bulk 16<br />
MMM-26340 2" x 60 yds. Bulk 12<br />
MMM-26341 3" x 60 yds. Bulk 8<br />
MMM-26343 1/8" x 60 yds. Boxed 12<br />
MMM-26344 1/4" x 60 yds. Boxed 12<br />
AUTOMOTIVE REFINISH MASKING TAPE<br />
• CINTAS PARA ENMASCARAR •<br />
Use for masking before painting. No adhesive transfer, no edge lifting, and waterborne<br />
paint system compatible.<br />
MMM-06652 18 mm wide<br />
MMM-06656 48 mm wide<br />
DOOR APERTURE REFINISH TAPE (D.A.R.T.)<br />
• CINTAS PARA ENMASCARAR DE D.A.R.T. •<br />
Foam tape designed to be used in masking door jambs, hood and deck lid openings,<br />
or other areas which need sealing during painting. Provides a “soft edge” to prevent<br />
tape lines in the jamb area.<br />
DIAMETER ROLL SIZE BOXES/CASE<br />
MMM-06297 12mm 54.6 Yds. 6<br />
(1/2") (50 meters)<br />
SCOTCH ® #471 PLASTIC TAPE - BLUE<br />
• CINTAS AZUL DE SCOTCH ® - NUMERO 233+ •<br />
This uniquely constructed vinyl backed tape offers outstanding paint line definition<br />
along with superior holding power for critical masking operations including sharp<br />
curves, over rivets and into seams. The tape is packaged in individual poly bags.<br />
SIZE<br />
ROLLS/CASE<br />
MMM-06404 1/8" x 36 yds. 12<br />
MMM-06405 1/4" x 36 yds. 12<br />
630
<strong>BODY</strong> REPAIR TAPE<br />
Body Shop Tools<br />
& Equipment<br />
SCOTCH ® FINE LINE TAPES<br />
• CINTAS DE LÍNEA FINA SCOTCH ® •<br />
Special processed film backing allows taping over freshly painted acrylic lacquer or enamel<br />
surfaces sooner and with less chance of imprint damage. This polypropylene film tape<br />
can be used for lettering, stripping and two-tone separation lines in all types of truck and<br />
auto refinishing accounts. Not designed for outdoor application.<br />
SIZE<br />
ROLLS/CASE<br />
MMM-06300 1/8" x 60 yds. 12<br />
MMM-06301 1/4" x 60 yds. 12<br />
SCOTCH-MOUNT DOUBLE-COATED AUTOMOTIVE<br />
ACRYLIC FOAM TAPES<br />
• CINTAS DE ESPUMA ACRÍLICA DE DOBLE PELLO SCOTCH-MOUNT •<br />
• O.E.M. approved for the attachment of body side moldings, fascia nerf strips, bumper<br />
trim, wheel lip and door edge moldings, claddings and a wide variety of other trim<br />
components.<br />
• More durable and much stronger than other foam tapes.<br />
• Resists stress.<br />
• Gives good initial and cold temperature adhesion.<br />
• Individually packaged in a recyclable plastic container.<br />
• For optimum adhesion of plastic parts, use 3M Automotive Adhesion Promoter<br />
(PN06396)<br />
COLOR SIZE THICKNESS<br />
MMM-06377 Gray 1/2” x 20 yds. Boxed 30 mil, 030”<br />
MMM-06378 Gray 7/8” x 20 yds. Boxed 30 mil, 030”<br />
MMM-06381 White 7/8" x 20 yds. Boxed 45 mil, .045"<br />
MMM-06382 Black 1/2" x 20 yds. Boxed 45 mil, .045"<br />
MMM-06383 Black 7/8" x 20 yds. Boxed 45 mil, .045"<br />
MMM-06384 Black 1/2" x 5 yds. Boxed 45 mil, .045"<br />
MMM-06930 Scotch ® Auto Body Repair Tape<br />
(Cinta para Reparación de Auto de Scotch ® )<br />
A practical, easy-to-use back-up material for plastic filler on rust-out areas. Has extremely<br />
high-strength adhesive. Is strong and rigid. Withstands weathering well. Thick aluminum<br />
backing. 2” x 125”.<br />
MMM-19221 Safety-Walk Comfortable Anti-Slip<br />
Surfacing Rolls<br />
A new anti-slip surfacing material that can be bent, rolled or angled to fit any uneven or<br />
smooth surface. Sticks tight to any clean, dry surface. Provides positive grip even when<br />
exposed to water, grease, and oil. 2" x 60 ft. 6 per case.<br />
MMM-06930<br />
MMM-19221<br />
MMM-39523<br />
MMM-39523 Scotchpro TM Box Sealing Tape<br />
(Cinta de Sellado de Scotchpro TM )<br />
Stronger, comformable 2.0 mil film that provides a consistent, uniform<br />
seal with no water or sticky cleanup. This product resists<br />
center splitting, seals out moisture, dust, and dirt. 4 rolls per pack,<br />
48 mm x 50 m.<br />
631
FINISHING PUTTY<br />
Body Shop Tools<br />
& Equipment<br />
MMM-05972<br />
MMM-05972 21 oz. Super Red Putty<br />
(Masilla Roja)<br />
An excellent glazing putty with smooth and easy spreading characteristics designed to<br />
flow into and fill pinholes and scratches. This is a nitrocellulose putty that has “long<br />
working time” with minimal shrinkage and feathers out to a smooth surface. It sands<br />
easily, even after overnight drying.<br />
MMM-05960<br />
MMM-05960 21 oz. Acryl-Green Spot Putty<br />
(Terreno Masilla de Acryl-Green)<br />
For filling minor imperfections and scratches. Can be sanded in 10 to 15 minutes.<br />
Spreads easily, dries fast, sands easily.<br />
MMM-05964 21 oz. Acryl-Blue Glazing Putty<br />
(Acristalamiento Masilla de Acryl-Blue)<br />
For filling minor low areas or deeper sand scratches. Can be sanded in 30 to 45<br />
minutes. Excellent adhesion, minimum shrinkage, loads paper less.<br />
MMM-05964<br />
MMM-05966 21 oz. Acryl-Red Putty<br />
(Masilla de Acryl-Red)<br />
For filling pinholes, scratches and grinding imperfections. Has minimal shrinkage, dries<br />
fast and feathers out to a smooth surface.<br />
MMM-05966<br />
MMM-05821 24 fl. oz. Piranha Advanced Finishing Putty<br />
(Masilla Acabado Avanzada de Piranha TM )<br />
• Two component, self-leveling putty designed for use as a “skin” coat over plastic<br />
filler to fill pinholes, sand scratches, low areas and other imperfections.<br />
• Cures tack-free in 30 minutes.<br />
• Grips tight to galvanized steel, sanded paint, aluminum, steel, SMC, and fiberglass.<br />
• Extremely easy sanding.<br />
• Flowable and brushable.<br />
• Non-staining.<br />
MMM-05821<br />
PERFECT-IT II RUBBING COMPOUND<br />
• COMPUESTO DE FREGAR PERFECT-IT •<br />
Specially designed medium cutting, liquid compound for removing 1200, 1500, and<br />
2000 color sanding scratches in automotive paints including clear coats.<br />
SIZE<br />
QTY./CASE<br />
MMM-05973 1 Quart 12<br />
MMM-05983 1 Gallon 4<br />
MMM-05973<br />
MMM-05983<br />
632
PROTECTIVE COATINGS<br />
MAR-706 18 oz. Paintable Rubber Undercoat<br />
(Protección para la Parte Inferior del Vehículo de Caucho)<br />
Use on under carriage, trunks, and floor boards.<br />
MMM-03572 14 oz. Auto-Pak Scotchgard<br />
Upholstery Protector<br />
(Protector de Tapicería de Auto-Pak de Scotchgard)<br />
Contains a hard-working foam that deep cleans all colorfast auto and van cloth<br />
or velour upholstery. Special Scotchgard protection remains after cleaning to<br />
help prevent stains and soiling. Most spills blot up easily. Dirt vacuums away.<br />
Body Shop Tools<br />
& Equipment<br />
MMM-08864 Body Shutz Rubberized Coating (Black)<br />
(Revestimiento de Caucho de Body Schutz TM - - Negro)<br />
Used as sound deadener. Underseal dries rapidly. High resistence to abrasion<br />
and water.<br />
MMM-08874 Rocker Shutz (Beige)<br />
Paintable 30 minutes after application. Chip resistent and fast drying.<br />
MMM-08881 20 oz. Undercoating - Black<br />
(Protección para la Parte Inferior del Vehículo- Negro)<br />
A multi-purpose, non-paintable aerosol coating for undercarriages, wheel<br />
wells, frame rails and fenders. Protects metal from corrosion and abrasion.<br />
MMM-08882 Underseal Undercoating<br />
(Protección para la Parte Inferior del Vehículo de Underseal TM )<br />
Paintable aerosol undercoating designed to protect surfaces from corrosion<br />
and provide sound deadening. Can be applied to bare or primed metal. For<br />
painting, let dry for 30 minutes at room temperature or greater than 60<br />
degrees.<br />
MMM-08892 Rust Fighter-I<br />
(Internal Coating Compound)<br />
Amber-colored, runny product ideal for restoring corrosion protection during<br />
the spot repair of hemming flanges, door skins, rocker panels, etc. Intended for<br />
use as an internal coating compound. It remains tacky, flexible and pliable after<br />
application.<br />
MAR-706<br />
MMM-08864<br />
MMM-03572<br />
MMM-08874<br />
MMM-08881<br />
MMM-08882<br />
MMM-08892<br />
MMM-08997<br />
MMM-08997 Body Schutz TM Applicator Gun<br />
(Pistola de Aplicador de Body Schutz TM )<br />
Developed to provide a unique, convenient and inexpensive<br />
means of spraying 3M Brand Rubberized Body Schutz Coating.<br />
For use with 3M 08864 and 08874.<br />
633
SEALANTS<br />
Body Shop Tools<br />
& Equipment<br />
MMM-08500<br />
MMM-08531<br />
MMM-08500 All-Around Autobody Sealant (White)<br />
(Sellador Todos-Alrededor de Autobody - Blanco)<br />
Used for sealing interior and exterior autobody joints and seams. Applies easily,<br />
can be smoothed to a feather-edge with a wet finger and sets to a firm,<br />
tough rubber-like water resistant bead. Can be painted over in 30 minutes will<br />
not mar or harm existing paint finish and can be cleaned off with water before<br />
it dries. Fits 1/10 gallon cartridge gun.<br />
MMM-08531 5 oz. Heavy Drip-Check Sealer<br />
(Sellador de Goteo-Verificar Pesada)<br />
An easy to use, fast drying, flexible rubber sealer. Has the right flow to permanently<br />
seal small cracks and openings. Ideal for use in drip rails, moldings,<br />
cowlings and welded seams. Can be painted within 30 minutes. Heavy type for<br />
sealing vertical seams. Resists most automotive fluids.<br />
MMM-08551 5 oz. Clear Auto Sealer<br />
(Sellador Transparente de Auto)<br />
A non-yellowing, optically clear sealer for sealing wind-shields, drip moldings,<br />
reveal moldings, truck ornaments, tail lights and other small seams on the<br />
auto body. Also useful for sealing convertible back lights.<br />
MMM-08656 Brushable Seam Sealer/Quart (Gray)<br />
(Sellador para Juntura)<br />
Specially developed to seal sheet metal overlap joints that have been spot<br />
welded, riveted or bolted together. Dries quickly without sag or flow to restore<br />
factory appearance. Can be painted when dry. Adheres well to bare or painted<br />
metal surfaces, remains flexible and resists oil, fuel and other automotive<br />
fluids. Use for sealing floor pans, firewalls, truck seams, shock absorber<br />
mounting towers, around wheelwells, fuel filler splash pans and around headlight<br />
and tail light openings.<br />
MMM-08551<br />
MMM-08656<br />
634
SEALANTS<br />
SUPER SILICONE SEALANT<br />
• SELLADOR DE SILICONA •<br />
A paste-like, non-sagging, moisture curing, silicone rubber sealant. Useful for repair<br />
and maintenance applications. Remains flexible with excellent resistance to weather,<br />
temperature extremes and aging. Adheres to bare and painted metal, glass, nonoily<br />
woods, many plastics and abraded rubbers. Excellent gasket adhesive and<br />
formed-in-place gasket material. Fits 1/10 gallon cartridge gun.<br />
MMM-08664 Black<br />
RAPID CURE SUPER SILICONE SEALANT<br />
• SELLADOR DE SILICONA DE CURACIÓN RÁPIDA •<br />
A rapid curing adhesive/sealant formulated to solve repair and maintenance problems.<br />
Excellent gasket adhesive and formed-in-place gasket material. Adheres to a<br />
wide variety of automotive surfaces. 3 oz. tube.<br />
MMM-08662 Black<br />
MMM-03664<br />
Body Shop Tools<br />
& Equipment<br />
MMM-08300 UltraPro Autobody Sealant<br />
(Sellador para Autobody de UltraPro)<br />
Heavy bodied seam sealer. Quick skinning, fast curing and flexible. High solids and<br />
low shrinkage. Can be painted in as little as 40 minutes. Fits 1/10 gallon cartridge<br />
gun.<br />
MMM-08578 Strip-Calk<br />
For sealing openings in the car body where a soft, nonhardening material is needed.<br />
Good for use in seams, cracks in joints, trucks, cracks around pillar posts, cowling<br />
and windshields. Waterproof, will not shrink, requires no application tools, can be<br />
painted.<br />
MMM-08662<br />
MMM-08300<br />
MMM-08578<br />
635
SEALANTS/ADHESIVES<br />
Body Shop Tools<br />
& Equipment<br />
MMM-08001<br />
MMM-08002<br />
MMM-08008<br />
MMM-08011<br />
MMM-08051<br />
MMM-08001 5 oz. Super Weatherstrip Adhesive<br />
(Super Adhesivo de Weatherstrip)<br />
Yellow. For adhering all types of rubber weatherstripping to car doors and<br />
trucks. An excellent adhesive for bonding engine gaskets. Can be used<br />
for adhering vinyl trim headliners and side panels. Light colored adhesive.<br />
Very fast drying, exceptional bonding strength.<br />
MMM-08002 2 oz. Super Weatherstrip<br />
and Gasket Adhesive<br />
(Super Adhesivo de Weatherstrip y Empaques)<br />
Yellow. A strong, flexible, rubbery adhesive that can withstand vibration,<br />
oil, grease, and extreme temperature variations. It can be used to bond<br />
weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs.<br />
Excellent adhesive for holding paper, cork, or rubber gaskets in place<br />
during installation.<br />
MMM-08008 Super Weatherstrip Adhesive<br />
(Super Adhesivo de Weatherstrip)<br />
Black. A strong, flexible, rubbery adhesive that withstands vibration and<br />
extreme temperature variations. Primarily designed for use on T-Tops,<br />
Moon Roofs and Sun-Roofs to provide the strength and rapid setting<br />
needed to hold weatherstripping and gaskets in place caused by the odd<br />
configurations these types of roof have. Because of its black color,<br />
clean-up is eliminated due to its blending with the rubber.<br />
MMM-08011 5 oz. Weatherstrip Adhesive<br />
(Adhesivo de Weatherstrip)<br />
Black. For bonding trim fabrics (except vinyl), truck linings, floor mats and<br />
rugs, silencer pads, KB board, also good general purpose rubber cement.<br />
Has quick tack, will not bleed through fabric.<br />
MMM-08051 5 oz. Feathering Disc Adhesive Type II<br />
(Adhesivo de Difuminado Disco - Tipo II)<br />
Especially formulated to allow multiple disc applications without adhesive<br />
buildup or paper delamination. Discs removes easily and cleanly.<br />
636
SEALANTS/ADHESIVES<br />
MMM-08074<br />
MMM-08090<br />
MMM-08074 24 oz. Spray Trim Adhesive - Clear<br />
(Adhesivo de Adornos para Pintar - Trasparente)<br />
An adhesive for attaching lightweight trim material (upholstery cloth, trunk liners) to<br />
metal and other surfaces. Ideal for position bonding applications where mechanical<br />
fasteners will be used. May be used to bond styrofoam.<br />
MMM-08090 Super Trim Adhesive<br />
(Super Adhesivo de Adornos)<br />
Fast acting, high strength, aerosol contact adhesive designed for two-surface application.<br />
Resistant to heat and plasticizing oils and is excellent for attaching vinyl tops,<br />
headliners, vinyl trim, insulation, foam, padding and rubber parts to metal and other<br />
surfaces. Bonds can be made within minutes of application or as long as one hour<br />
later.<br />
MMM-08101 Structural Adhesive<br />
(Adhesivo Estructurales)<br />
A two part general purpose structural adhesive that may be used for bonding auto<br />
glass to metal retainers and also for trim ornaments and miscellaneous fiberglass<br />
repair. Two 2 oz. tubes.<br />
MMM-08606 Window-Weld Sealer<br />
(Sellador de Window-Weld)<br />
Black. A one-part polysulfide adhesive sealant designed for use in the replacement of<br />
bonded windshields and backlites Ideal for providing a supplementary seal for windshields<br />
installed with butyl tape. Requires no primer. 1/10 Gallon Cartridge, 12 per<br />
case.<br />
MMM-08992 Cartridge Applicator Gun<br />
(Pistola de Aplicador de Cartucho)<br />
1/10 gallon cartridge gun for use with glazing compound, Windo-Weld sealer, and Auto<br />
Bedding.<br />
MMM-21210 24 oz. Super 77 Spray Adhesive - Clear<br />
(Adhesivo para Pintar de Super 77 - Transparente)<br />
Fast, aggressive tack for bonding most lightweight materials. Extremely versatile<br />
adhesive.<br />
MMM-08101<br />
MMM-08606<br />
MMM-08992<br />
Body Shop Tools<br />
& Equipment<br />
MMM-21210<br />
637
ADHESIVES<br />
Body Shop Tools<br />
& Equipment<br />
MMM-08031<br />
MMM-08061<br />
MMM-08088<br />
MMM-08031 5 oz. Fast Tack Trim Adhesive<br />
(5 oz. Adhesivo de Molduras Interior o Exterior de Fast Tack)<br />
A light colored, extremely fast drying, non-staining adhesive with long tack for attaching<br />
vinyl and other kinds of trim fabric, upholstery cloth, floor mats and carpeting, kick<br />
pads, silencer pads and convertible tops to painted or bare metal, wood, KB board or<br />
other fabric. Also useful as a gasket adhesive to hold gaskets in place while assembling<br />
parts.<br />
MMM-08107<br />
MMM-08061 5 oz. Plastic & Emblem Adhesive<br />
(5 oz. Adhesivo para Reparación Plástico y Aplicación de Emblema)<br />
An excellent clear adhesive for plastic repair and emblem application. Use this strong,<br />
quick-drying adhesive for plastic or metal emblems, interior rigid plastic, tail light<br />
lenses, vinyl side moldings or upholstery.<br />
MMM-08088 18.1 oz. General Trim Adhesive<br />
(18.1 oz. Adhesivo de Molduras Interior o Exterio)<br />
Low VOC, clear, high strength adhesive for bonding automotive materials such as carpeting,<br />
jute pads, fabrics and plastics to metal and other surfaces. Has good heat and<br />
water resistance.<br />
MMM-08115<br />
MMM-08107 Automix Fast Cure Epoxy Adhesive<br />
(Adhesivo de Compuesto de Plástico de fast Cure Automix)<br />
A super strong two-part epoxy for bonding metal, glass, plastic, wood and fiberglass.<br />
Adhesive is conveniently dispensed by the 3M Automix Applicator Gun (PN08191).<br />
If automatic mixing is desired as the adhesive is being dispensed, use a 3M Mixing<br />
Nozzle (PN08197). 2 oz pack, 6 per case.<br />
MMM-08115 Automix Panel Bonding Adhesive<br />
(Adhesivo para Pegar de Panel Automix)<br />
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The<br />
primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides<br />
and door skins. 200 mL Cartridge, 6 per case.<br />
MMM-08505 Fast N Firm Seam Sealer<br />
(Sellador de Juntura Fast N Firm)<br />
Firm setting product for sealing interior and exterior joints. Adheres well to clean, bare<br />
metal, primed metal and paint surfaces. Skins over quickly. Low shrinkage. Can be<br />
painted within 30 minutes. Excellent tooling and sanding properties. 1/10 Gallon (US)<br />
Cartridge, 12 per case.<br />
MMM-08505<br />
638
ADHESIVES<br />
MMM-08634<br />
MMM-08641<br />
MMM-03618<br />
Body Shop Tools<br />
& Equipment<br />
MMM-08634 Windo-Weld Resealant<br />
(Sellador de Windo-Weld)<br />
Flow grade sealant developed to stop leaks and as a supplementary seal on all gasketless<br />
windshield and backlite car models. Flows easily into pinholes and suspected water leaks.<br />
Dries fast into flexible, rubbery seal. 1/10 Gallon (US) Cartridge, 12 per case.<br />
MMM-08641 Automix Channel Bonding and Sidelite Adhesive<br />
(Adhesivo para Pegar de Vidrio Automix)<br />
Black, flexible and durable adhesive used for bonding moveable and stationary glass into<br />
place. Has a 4 to 5 minute worklife and drive-away time of one hour. 2 oz , 6 per case.<br />
ADHESIVE REMOVERS<br />
• REMOVEDORES DE ADHESIVOS •<br />
MMM-03618 12 oz. Adhesive, Tar and Wax Remover<br />
(12 oz. Removedor de Adhesivo, y Cera)<br />
For removing tree sap, adhesive, silicone, wax, oil, grease and tar.<br />
MMM-08908 Woodgrain and Stripe Adhesive Remover<br />
(Removedor de Adhesivo de Vinilo)<br />
Cleans off adhesive residue after woodgrain vinyl or vinyl stripes have been removed. Fastacting<br />
remover can be used on all acrylic enamel painted metal surfaces. 1 lb 2 oz, 6 per<br />
case.<br />
MMM-08984 1 Quart General Purpose Adhesive Cleaner<br />
(Limpiador de Adhesivo Uno Cuarto)<br />
Specially blended solvent that provides easy cleanup of most types of adhesives. Quickly<br />
removes waxes, road tars, grease, oil and similar materials. Will not harm thoroughly dried<br />
automotive paint, vinyl or fabrics when properly used.<br />
WINDO-WELD RIBBON SEALER BLACK<br />
ª SELLADORES DE CABLE WINDO-WELD •<br />
• Its unique feature of “controlled” compressibility allows easy installation yet will not<br />
squeeze out or allow lite to contact pinch-weld.<br />
• One kit or one 15' roll is sufficient material to replace one windshield or<br />
backlite.<br />
• One 30' roll is sufficient material to replace two windshields or backlites.<br />
• Narrow (3/16") sealer allows for more glass-to-urethane contact.<br />
INDIVIDUAL KITS—Round<br />
Contains one roll of sealer and setting blocks.<br />
MMM-08610 Kit—1/4" x 15'<br />
MMM-08611 Kit—5/16" x 15'<br />
MMM-08612 Kit—3/8" x 15'<br />
MMM-08908<br />
MMM-08984<br />
639
COMPOUNDS & GLAZES<br />
Body Shop Tools<br />
& Equipment<br />
MMM-05990<br />
MMM-05933<br />
MMM-05928<br />
MMM-05991<br />
MMM-05995<br />
SUPER DUTY RUBBING COMPOUND<br />
• COMPUESTO DE FREGAR •<br />
Recommended for heavy, aggressive compounding of paint. Clings to paint surface,<br />
remains wet on the job with little or no mess. Maintains high rate of cut with constant<br />
pressure. Buffs to high gloss with minimum swirl marks.<br />
MMM-05954 Quart<br />
MMM-05955 Gallon<br />
GLAZES<br />
• CRISTALIZADORES •<br />
MMM-05928 Brand Finesse-It II Finishing Material - Quart<br />
(Material Cristalizado de Finesse-It II - Uno Cuarto)<br />
For use on OEM and baked refinish paints to remove Grade Microfine 1500 IMPERIAL-<br />
WETORDRY sand scratches, or to remove swirl marks after compounding, while leaving<br />
a glazed finish.<br />
MMM-05929<br />
One gallon container<br />
MMM-05990 Imperial Hand Glaze - Quart<br />
(Cristalizador Manual de Imperial - Uno Cuarto)<br />
A non-silicone, non-wax hand glaze, with high filling characteristics, excellent depth<br />
of shine and superior luster. Recommended for use by hand to fill swirl marks after<br />
compounding acrylic lacquer, it may also be applied to completely cured enamels and<br />
urethanes that have been compounded. Specially formulated to work on all colors and<br />
can be painted over.<br />
MMM-05991 Imperial Machine Glaze - Quart<br />
(Cristalizador de Máquina de Imperial - Uno Cuarto)<br />
Non-silicone, non-wax machine glaze. Possesses excellent scratch removal characteristics.<br />
Using 3M Imperial Machine Glaze results in superior depth of shine and luster.<br />
PERFECT-IT FOAM POLISHING PAD GLAZES<br />
• CRISTALIZADORES PARA ALMOHADILLAS DE PERFECT-IT •<br />
Uniquely formulated to remove compound swirl marks and leave a wheel mark free<br />
finish when applied with the PERFECT-IT Foam Polishing Pad. Compatible with all<br />
types of paint, these glazes contain no wax or silicones. Both glazes are clearcoat safe<br />
with identical performance characteristics. MMM 05996 provides easier detailing and<br />
cleanup on dark colored paints for which it was formulated.<br />
COLOR<br />
SIZE<br />
MMM-05995 White 32 fl. oz.<br />
MMM-05996 Dark 32 fl. oz.<br />
PERFECT-IT III PAINT FINISHING SYSTEM<br />
• SISTEMA PARA PINTURA DE PERFECT-IT III •<br />
MMM-05933 Perfect-It III Rubbing Compound<br />
(Compuesto de Fregar Perfect-It III)<br />
Superior cut combined with a high-gloss, ultrafine finish. Completely removes sand<br />
scratches without filling. One quart.<br />
MMM-05941 Perfect-It III Finishing Glaze<br />
(Cristalizador de Perfect-It III)<br />
Apply by hand or by DA to save time and effort. Produces a high gloss deep luster with<br />
durable finish. Silicone free. One quart.<br />
MMM-05941<br />
640