relax - Casada

eMote control
reMote control reMote control
Full body
massage
programs
Partial
massage
programs
1 on/off
Press once on this button and the backlight of the Remote Control will
start blinking: the chair is in idle mode. Press any massage function
button to begin massage functions on the chair. This will also start the
TIMeR. Press this button again to stop all massage functions, the massage
rollers will return to its original position.
2|3
4|5
6
7
8
With removable
remote control
recline/sit up
These buttons allow you to chose the desired reclining- and sitting
position.
29
40 32
lift leg/recline leg
28
With the help of these buttons you can optimally adjust 23 the foot rest.
length Adjustment control Button for legrest
With these buttons you can adjust the chair and the foot rest to your
individual body size.
30
lenght Auto 39Adjustment
37
34 control
31 26
Button
21 22 24 25
The chair is equipped with an automatic length adjustment. With these
buttons you can
38
adjust the 35 chair 33 to different 27 body sizes.
36
timer
At the start of a massage program a running period of 15 minutes is
predetermined. you may retrospectively adjust this period by using the
TIMeR button. you have intervals of 5 minutes available to you. The end
of the massage will be signalled by blinking and beeping of the control
unit one minute prior to finish.
pAuse
during the massage you may interrupt the program for a short period
with the PAUSe button at any time. At the same time the timer will stop
and the LCd display will blink. during this time the massage chair is
idling and only the reclining position and the foot rest can be altered. In
order to continue with the massage, press the „PAUSe“ button again.
17 neck-/shoulder
40 neck/Shoulder Auto Programme Start/Stop Control Button.
39 18
38
BAck/lumBAr
37
Back/Lumbar Auto Programme Start/Stop Control Button.
34 35
9
10
11
BAckrest scAn
This chair is equipped with a Scan function that the massage position
can be adjusted according to the user’s height for a more effective massage.
every time the button is pressed, the chair will start to scan the
user’s back and legs to detect the best massageposition. (Manual Backrest
Up/down Control Buttons ▲/▼): For more comprehensive and
comfortable massage, the user can further adjust the height of the massage
by pressing this buttons after the Scanning program. The massage
rollers will go upwards or downwards according to your request until the
most suitable position is reached and you let go off the button. notes:
These manual Up/down buttons can also be used in the Memorized
Programs for the selection of different massage methods.
zero-g function
With this button you will place the massage chair into a total reclining
position. Feet and head will be on one level. The massage is strongest in
this position, as the entire body weight rests on the massage units.
full Body Auto progrAmms
Once you start one of the five automatic programs, the Auto Scan will
begin to scan your body structure. during this you can manually adjust
all sizes and adapt the massage chair to your requirements.
12 heAlthcAre 13 relAx
14 smArt 15 circulAtion
16 demo
Press this button for a brief demonstration of the features of the massage
chair.
locAlised Auto progrAmms
This programms give precise massage at the exact part of the body for
better localized-massage effect.
19
20
full Air
Full Body Auto Air Compression Function Control Button.
heAt
Lumbar Heat Function Control Button.
reMote control