EY15V, EY20V - Small Engine Discount
EY15V, EY20V - Small Engine Discount
EY15V, EY20V - Small Engine Discount
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Order<br />
It em<br />
Procedures<br />
Remarks<br />
Tool<br />
9<br />
Starting pulley<br />
I<br />
(1) Remove the starting pulley from the flywheel.<br />
144 nut: 1 pce.<br />
Fit a box or socket wrench over the flywheel<br />
nut, and strike it hard with a hammer<br />
to remove the 14 mm nut and spring<br />
washer.<br />
Be careful to damage<br />
the blades of the flywheel<br />
with a driver<br />
and the like.<br />
Strike counterclockwise<br />
with a hammer.<br />
(See Fig. 16.)<br />
19 mm box spanner<br />
or socket wrench<br />
10<br />
, Flywheel<br />
(1) Remove the flywheel from the crankshaft.<br />
Fit the flywheel puller<br />
as per Fig. 17, turn<br />
the center bolt clockwise<br />
and pull out the<br />
flywheel.<br />
I<br />
Flywheel Puller<br />
0 ' Flywheel<br />
Fig. 16<br />
Fig. 17<br />
Order<br />
Item<br />
Remarks Procedures<br />
Tool<br />
11 10 mm box spanner Sems b<br />
ignition plug; and remove the ignition<br />
coil from the crankcase.<br />
12 19 mm box spanner (1) Remove the ignition plug from the cyl-<br />
Ignition plug<br />
inder head.<br />
13 Cylinder head (1) Remove the 8 mm bolt and remove the<br />
cylinder head from the crankcase.<br />
8@ x 40 mm bolt: 8 pcs.<br />
(2) Remove the cylinder head gasket from<br />
the crnkcase.<br />
- 15-
Change language