EY15V, EY20V - Small Engine Discount

After measuring the air gap between the ignition
coil and flywheel, retighten the ignition coil.
(See Fig. 38.)
Air gap: 0.5 mm
L
Fig. 38
I
5-4- 1 FUEL TANK BRACKET
With four pieces of the bolt fasten the fuel tank
bracket to the crankcase.
Note: DISTICTION between FUEL TANK BRACK-
ETof EY15Vand THATof EY2OV:
For enabling to discriminate the fuel tank
bracket of EY20Vfrom that of EYISV, an embossed
mark 20 is given to the former, while
no embossed mark is given to the latter.
Distinction between the fuel tank
bracket of EY20V and EYl5V
Embossed Mark -
\ 0
1
0 1
I
0;
L
fig. 39
5 -4- 12 INTAKE MANIFOLD
To the cylinder portion of the crankcase install the
gasket and temporarily fasten the intake manifold.
Then install in the order of the gasket, insulator, gasket
and carburetor.
Note: DISTINCTION between INTAKE MANI-
FOLD of EYISVand THAT of EY20V:
for enabling to discriminate the intake manifold
of EY20V from that of EYISV, an embossed
mark 20 is given to the former, while
no embossed mark is given to the latter.
Distinction between the intake
manifold of EYZOV and EY 15V
- 26 -
Fig. 40
U