RC PLANE WITH SLATS AND FLAPS AEROMODELLING CLUB IIT ...
RC PLANE WITH SLATS AND FLAPS AEROMODELLING CLUB IIT ...
RC PLANE WITH SLATS AND FLAPS AEROMODELLING CLUB IIT ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
THE SHAPE OF THE FUSELAGE WAS MADE SUCH THAT IT CAN SUPPORT<br />
WEIGHT OF THE WING PROPERLY .<br />
SO WE GAVE ANGLES TO LATER PORTION OF FUSELAGE . THE FUSELAGE WAS<br />
DIVIDED INTO THREE PARTS .THE LATER PART WAS STRENGHTHENED BY FILLING<br />
IT <strong>WITH</strong> STYROFORM.<br />
FOR THE FORMER PART WE USED PLY WOOD TO FIX THE MOTOR <strong>AND</strong><br />
ATTATCHED IT BY USING MOLTEN PLASTIC.<br />
WE ALSO USED PLY IN INNER PARTS OF FUSELAGE.<br />
<strong>AND</strong> TO PROVIDE PROPER SUPPORT TO THE HORIZONTAL <strong>AND</strong> VERTICAL<br />
STABILIZER WE SUPPORTED CORO BY BALSA WOOD.<br />
THE L<strong>AND</strong>ING GEAR WAS PLACED IN SAME LINE AS OF WING NEAR THE CENRE<br />
OF GRAVITY OF THE <strong>PLANE</strong>.<br />
WE PROVIDED REQUIRED STRENGH AT THE L<strong>AND</strong>ING GEAR POSITION BY<br />
USING PLY ON BOTH INSIDE <strong>AND</strong> OUTSIDE OF THE FUSELAGE WHICH<br />
HELPED IN DISTRIBUTION<br />
OF LOAD UNIFORMLY.
Change language