RC PLANE WITH SLATS AND FLAPS AEROMODELLING CLUB IIT ...
RC PLANE WITH SLATS AND FLAPS AEROMODELLING CLUB IIT ...
RC PLANE WITH SLATS AND FLAPS AEROMODELLING CLUB IIT ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ELECTRONICS IN THE <strong>PLANE</strong>:<br />
2600mah lipo battery<br />
9gm servo<br />
NTM electric motor 1100kv<br />
30amp ESC<br />
11X6 propeller<br />
connectors<br />
PROBLEMS FACED:<br />
1. DECIDING SLAT MECHANISM :<br />
FIRSTLY WE THOUGHT OF A DIFFERENT MECHANISM BUT IT DIDN’T<br />
WORKED OUT PROPERLY . SO WE SWITCHED TO ANOTHER<br />
MECHANISM.<br />
2. MINIMIZING WEIGHT:<br />
WE FACED THE MAJOR PROBLEM IN MINIMIZING THE WEIGHT OF<br />
<strong>PLANE</strong>. SO WE AVOIDED MAKING MOST OF THE PARTS SOLID<br />
3. STRENGTHNING OF FUSELAGE:<br />
IT TOOK A LOT OF TIME IN DECIDING WHERE TO GIVE MORE<br />
STRENGH.<br />
4. IN ASSEMBLY OF HORIZONTAL <strong>AND</strong> VERTICAL STABILIZER:<br />
HINGES WERE NOT SUFFICIENTLY STRONG SO WE USED TO REPLACE<br />
IT REPEATEDLY.
Change language