MultiSpace wood lockers.pdf - Snyder Equipment, Inc.

PRODUCT INFORMATION 

MultiSpace wood 

lockers 

2946 Larimer St. Denver, CO 80205 

303-295-1100 / 800-373-7693 

FAX 303-295-2464 

Email info@snyderequipment.com 

www.snyderequipment.com

L O C K E R S Y S T E M S 

DEFINING THE ARCHITECTURE OF CLUB FURNISHINGS 

w w w . c l u b r e s o u r c e g r o u p . c o m

Locker Room Benches 

These attractive and durable locker room benches 

are a monolithic, water-impervious bench top 

available with powder coated or stainless steel bench 

pedestals. Available in many colors. 

See installation photo 

This stool is in the permanent collection of the 

Museum of Modern Art, New York City. Natural 

beech legs with birch veneer top 13-3/4" diameter 

and 17-1/4" high. Available in 3-legged or 4-legged 

configuration. All stackable. 

Click here to request more 

information 

Club Resource Group 

6736 Preston Avenue, Suite E 

Livermore, CA 94551 

800.536.6858 

Fax 925.734.3030 

email: ecom@clubresourcegroup. 

com 

http://www.clubresourcegroup.com/html/lockerBenches.html (3 of 4)4/9/2004 3:16:11 AM

GRAND DESIGNS 

, a division of Club Resource 

Group , has since 1974 carefully designed 

our lockers and locker Systems to fill the 

requirements of our clients by providing 

flexibility and versatility for the architect and 

interior designer: practicality and serviceability 

for the facility owner, security and good looks 

for the user. 

Wood and plastic laminate faced lockers have 

been the cornerstone of our MultiSpace Locker 

Systems. Using the highest quality laminates, 

veneers, solid stock or bladder pressed 

technology and combined with architectural 

grade materials, the craftsmanship 

that goes into each of our MultiSpace 

lockers, reflects our belief that every 

locker is as unique and individual as 

our customers. 

The architect and owner have the 

freedom to choose from a standard 

product line, or a custom tailored, 

design and build solution. 

This offering allows the integration 

of our locker room seating, vanities, 

grooming stations, towel bins, and 

all the applicable millwork trim for a 

complete locker room solution for the 

club owner, architect or contractor. 

RPD VPD LPD

MULTIPLE CHOICE 

designs, fabricates, and can provide factory direct 

installation of the highest quality wood and plastic laminate 

faced locker systems in the industry. Our high pressure plastic 

laminate lockers come in hundreds of colors and finishes, 

allowing freedom of choice. These lockers are tough as they 

are practical for a 

number of applications. 

All doors edges are 

in matching and various 

thickness’ of P.V.C., 

solid and veneer hardwood, as well as our proprietary vertical 

edged post formed style doors. 

The combination of premium grade materials and the highest 

quality hardware components, ensures that our lockers are the 

most durable in the business, and offer years of reliable 

performance and unparalleled aesthetic quality. Where quality 

and style are essential ingredients to locker room planning, 

MultiSpace is the turnkey solution. MultiSpace can provide the 

complete package to make your locker room a prestigious area of 

hand-crafted fittings for the ultimate in comfort and durability. 

MultiSpace provides specialized services which extend the advantages of our locker 

systems and their specific application. By providing you with customized interiors, 

frame sizes, accessories and hardware, we set ourself apart from our competitors, 

that is why the most discriminating clubs in our industry choose MultiSpace. 

PVC SE3mm PFD

S p e c i f i c a t i o n s 

S TA N D A R D 

C O N F I G U R AT I O N S 

Outside Dimension 

Door Openings per 

Model No. per Frame WxDxH Frame (door height) 

A 1272-1 11.5 x 19.5 x 72 1 Door (72") 

B 1236-2 11.5 x 19.5 x 72 2 Doors (36") 

C 1224-3 11.5 x 19.5 x 72 3 Doors (24") 

D 1218-4 11.5 x 19.5 x 72 4 Doors (18") 

E 1214-5 11.5 x 19.5 x 72 5 Doors (14") 

F 1212-6 11.5 x 19.5 x 72 6 Doors (12") 

G 1212/60-2 11.5 x 19.5 x 72 2 Doors (12"/60") 

Z* 1254-2Z 11.5 x 19.5 x 72 2 Doors (54") 

I 1242-2 11.5 x 19.5 x 84 2 Doors (42") 

CCI 1542-2 15 x 19.5 x 84 2 Doors (42") 

SECTION 10500 

PART ONE - GENERAL 

1.01 WORK INCLUDED 

A. The furnishing and installation of prefabricated modular wood lockers. 

1.02 QUALITY ASSURANCE 

A. All wood parts and hardware shall be structurally sound and free from 

defects in material and workmanship under normal use and service for a 

period of three (3) years. All lock parts are warrantied for a period of one 

(1) year or the manufacturers OEM warranty. 

1.03 Submittals 

A. Manufacturer’s descriptive data of all materials and product construction, 

overall dimensions for installation of lockers, accessories, and trim. 

1.04 DELIVERY, STORAGE, AND HANDLING 

A. Deliver lockers adequately protected from damage during shipment. 

B. Store lockers in dry, ventilated area. 

C. Protect lockers from adverse job conditions prior to installation 

PART TWO - PRODUCTS 

2.01 ACCEPTABLE MANUFACTURER 

A. MultiSpace Locker Systems, a Division of Club Resource Group, 

6736 Preston Avenue, Suite E, Livermore, CA 94551 

Tel: 1-800-536-6858 Fax: 925-734-3030 

Email: Ecom@clubresourcegroup.com 

Web: www.clubresourcegroup.com 

2.02 MATERIALS 

A. Locker Case: All substrate and interior components are of 47 lb. 

Density 3/4” industrial grade particle board, interior bonded with 

high impact, abrasion, stain, and water resistant acrylic laminate, 

almond colored. 

B. Case Edge: All exposed edges of locker frame including shelves are 

edge banded with either black PVC (.016) standard; 3mm black PVC, 

3mm hardwood; wood veneer tape; or 1/32“ plastic laminate 

Other P.V.C. colors available. (Select One) 

C. Venting: Locker tops, bottoms, and shelves are held back 1/8” to 

allows adequate natural air flow. Vent holes located in the rear panel 

and/or shelves upon request. 

D. Number Plates: An inlaid flush mounted 1-1/2” diameter black round 

number plate with white numbers. Available in brass and stainless steel 

with black numbers. Name plates available upon request. (Select One) 

E. Hinges: Semi-concealed Youngdale #5 heavy duty, rust resistant, spring 

loaded hinge (brass or aluminum finish); European fully concealed 125 

degree spring loaded hinge; or Institutional fully exposed 2-3/4” five (5) 

knuckle black enamel offset throw hinge with fixed pin. (Select One) 

F. Locking Systems: (1) Digilock – digital key-pad, available in recessed or 

flush mounted and ADA Digilock TE; (2) Heavy duty cam key locks by 

Assa Abloy, Medeco or Illinois Lock, furnished with two keys and one 

master key; (3) Built-in combination locks by Master Lock Co. or Zephyr 

Lock master keyed; (4) Padlock Hasp: MultiSpace heavy duty throughbolted 

offset padlock hasp assembly or Swivel pad lock (5) Card Activated 

Locks by Assa Abloy or Safe-0-Mat: (6) Coin operated locks by Secura 

Channel Lock, Assa Abloy or Safe-O-Mat with master key. All locks 

available in various brass, chrome or zinc finishes. (Select One) 

G. Hooks, Rods and Pulls: Two (2) side mounted single prong hooks in 

openings greater than 24”. 

Clothing rods, door pulls available, Brass or aluminum finish. 

(Select One) 

H. Doors: 3/8” overlay style. 

1. Laminate Door: (PL) 11/16“ 47lb. density industrial grade particle, 

fused with 1/32” vertical grade high pressure laminate to both sides with 

the finish door size at 3/4“. All door edges are trimmed in matching 1/32” 

plastic laminate (SE); or Black 3mm PVC (SE3mm); or 3mm hardwood 

(3mmHW); or matching. 016 PVC (PVC) standard; or a full 180 degree 

post formed 3/8” radiused vertical door edges(PF). 

Available in Wilsonart, Formica, Pionite, Nevamar, Abet Laminati and 

Laminart Brands. 

2. Wood Veneer Door: (VPD) 3/4” A-l plain sliced veneer, available in 

many species and other cuts. Veneer is end matched on multiple door 

openings. Finish is a natural catalyzed lacquer applied in three coats with 

hand sanding between coats. Special staining and paint grades available. 

3. Raised Panel Door: (RPD) 3/4” solid hardwood revere style available 

in many styles and species. Raised panel is 3/4” thick kiln dried with 

minimum glue joints. All style and rail joints are glued together with a 

gap between panel to allow for shrinkage and swelling. Finish is a natural 

catalyzed lacquer applied in three coats with hand sanding between coats. 

Special staining, paint and bladder pressed grades available. 

4. Louver Panel Door: (LPD) 3/4” solid hardwood available in many 

species. All style and rail joints are doweled together. Louvers are in a fixed 

position and vented. Finish is a natural catalyzed lacquer applied in three 

coats with hand ending between coats. Special staining and paint grades 

available. 

5. Special Door configurations, eg., RPD and LPD are available upon 

request. 

I. Panels: Exposed to view, locker end and filler panels in coordinating 

laminate, veneer, and solid wood panels in accordance with lockers and 

exposed fascia. 

2.03 FABRICATION 

A. Locker shall be fabricated with European 32mm glue and doweled 

construction. All dowels are glued in place. Fabricate locker cases square, 

rigid and without warp. Finished faces flat and free of scratches and chips. 

All exposed and semi-exposed joints shall be aligned and true. Fabricate 

corners, end panels, and fillers as required by installation. 

B. MultiSpace reserves the right to change design or specifications at any 

time without notice. 

PART THREE - EXECUTION 

3.01 INSPECTION 

A. Inspect delivered material; reject damaged items and notify MultiSpace. 

B. Inspect surfaces where lockers are to be installed and verify field conditions 

for installation are satisfactory. 

Report any discrepancies or layout variations to the architect prior to 

commencing installation. 

3.02 INSTALLATION 

A. Install lockers, and accessories per approved plans and 

manufacturers instructions for a plumb, level rigid, and flush installation. 

B. Locker bases to be leveled 2” to 4” (2” x 6” optional) Douglas Fir per 

manufacturer shop drawings. Bases free from all material and debris, to 

achieve tight fitting, neat joints. 

C. Anchor locker case to wall studs (or fur strips attached to wall) through 

locker back panel and to base through locker floor. Lockers are attached 

side to side through pre-drilled holes, connectors supplied. 

D. Adjust and align all doors and clean lockers. Inspect lockers to verify 

that all working parts are operating. Attach number plates in sequence 

specified. Deliver keys and all other pertinent information to the owner. 

CCA 1572-1 15 x 19.5 x 72 1 Door (72") 

CCB 1536-2 15 x 19.5 x 72 2 Doors (36") 

CCZ* 1544-2Z 15 x 19.5 x 72 2 Doors (54") 

CCS 2412-2 24 x 19.5 x 72 1 Door (12") 

Storage Bench 

w w w . c l u b r e s o u r c e g r o u p . c o m 

800.536.6858 • Fax 925.734.3030 • 6736 Preston Avenue Suite E, Livermore, CA 94551

To Protect & Serve 

P u b l i c S a f e t y 

Reliablity 

Club Resource Group, a 

leading supplier of lockers 

and other furnishings for 

the sport and health club 

industry, now also 

provides the best value 

and quality in public 

safety furnishings with our 

MultiSpace® Public Safety 

product offering. 

As good looking as they 

are tough, the MultiSpace 

Public Safety products are 

specifically designed for 

uses in Firehouses and 

Police command centers, 

as well as other municiple 

offices where durablity 

and functionality count. 

WARDROBE LOCKER— 

This plastic laminate 

Wardrobe locker offers a 

large amount of space 

that can be sectioned 

for whatever your 

department’s needs are. 

WARDROBE LOCKER— 

Our Wardrobe lockers come in a multitude 

of styles and colors. 

THREE DRAWER BED— 

Provides easy access to three pull drawers for all the storage space you need. 

MultiSpace Locker Systems • ClubLine Furnishings • Rubber & Hardwood Flooring • ClubView Pre-sales 


Resiliency & Style 

P u b l i c S a f e t y 

Adaptations 

MultiSpace products can be custom designed and manufactured in either plastic 

laminate or phenolic depending on your needs. They come in hundreds of colors 

so they adapt to about any asthetic environment. 

EVIDENCE LOCKERS— 

CRG can custom build to specification 

your evidence lockers, ensuring security 

and usability. 

PERSONAL STORAGE— 

CRG can provide you 

with a wide range of 

solutions for personal 

storage as well as 

customized office 

furniture for your facilities. 

DEPARTMENT OFFICE FURNITURE— 

We carry a full line of office furnishing for your 

every department need. 




Wood Locker Room Benches 

Stylish Country Club look. Bench seat can be 

laminate or 

ready for carpet application. Available in many 

species and 

finishes.Available in 14" and 18" widths. Lengths 

are 48", 60" and 72". Custom sizes available. 

Clean contemporary lines. Bench seat can be 

laminate or ready for carpet application. Available in 

many species and finishes. Available in 14" and 18" 

widths. Lengths are 48", 

60" and 72". Custom sizes available. 

Sturdy, clean modern lines. Made out of solid 

laminated hardwood - the strength of solid wood to 

last a lifetime. Available in many species and 

finisheds. Available in 12" and 15" widths. Lengths 

are 36", 48", 60" and 72". Custom sizes available. 



This is our most popular bench. Available in both 

12" 

widths as well as 15". Lengths are 24", 36", 48"and 

60". 

Special sizes available. 

A classic design. Outside frame is solid hardwood 

available in many species of wood. Numberous 

finishes available. Center of top and legs can be 

either laminate or carpeted. Available in both 12" 

widths as well as 15". 

Lengths are 24", 36", 48" and 60". Special sizes 

available. 

Modern lines are the hallmark of this bench. 

Bench seat can be laminate or ready for carpet 

application. Available in 14" and 18" widths and 

lengths of 36", 48" and 60". Custom sizes available. 


Assured Confidence 

A C C E S S O R I E S 

DigiLock® Touch Key Pad Lock— A full line of touch 

pad digital locks. Available in spring and bolt style use 

along with a recognized ADA compliant locking device. 

Cam Key Lock— 

ASSA®, Medeco® and 

Northeast® heavy duty 

key locks 

Coin Collect Channel 

Lock— SECURA® Coin 

Channel, ASSA® or 

Safe-O-Mat® 

CRG will help you make intelligent and informed choices when deciding what kind of 

accessories you will use on your lockers. We provide solutions, products, and the 

services, your club needs to achieve the high mark of performance for its members, 

critical to club operations. 

Locks and Fasteners 

Combination Lock— 

Zephyr® & Master Lock® 

Swivel Padlock— 

Available in brass and 

chrome. (Great for key 

to padlock conversion) 

European Hinge— 

Fully concealed 

MultiSpace® Padlock Hasp— 

Through bolted Padlock Hasp 

Mico® #5 Spring 

Loaded Hinge— 

Semi-Concealed 

DEFINING THE ARCHITECTURE OF CLUB FURNISHINGS 

Card Activated Lock— 

ASSA® & Safe-O-Mat® 

MultiSpace Locker Systems • ClubLine Furnishings • Rubber & Hardwood Flooring • ClubView Pre-sales 

Institutional— 

Fully exposed 2-3/4 " 

five knuckle, 

fixed pin hinge 


Finishing Touches 

A C C E S S O R I E S 

3mm Black PVC on Case and Door Edge— 

Black Arc Door Handle and Zephyr® combo 

lock on wood grain plastic laminate door 

Hooks & Number Plates 

Single Prong Hooks— 

(Brass & zinc color) 

Double Ceiling Hooks— 


Building a club that reflects the culture of its members means being able to communicate those 

nuances in all parts of its construction. From case edges to hooks and number plates, CRG can 

assist you in putting those finishing touches on that help to define your club’s indentity. 

Case Edges & Door Pulls 

3mm Case Edge— 

Black PVC or Solid Hardwood 

(Other PVC colors avail.) 

Double Prong Hooks— 


.040 Case Edge— 

Black PVC or Wood Veneer 

(Other PVC colors avail.) 

Door Pulls— 4" Wire Pulls and 

5" Arc Handles (Avail. in Brass) 

Number and Name Plates— 1-1/2 " diameter, round recessed. 

(Brass, stainless color, or black face available.)

MultiSpace wood lockers.pdf - Snyder Equipment, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?