IBS Polisys belt grinding and polishing machines for manual finishing

Technical Data C 100 S C 200/150 S C 300 S
Belt dimensions 100 x 1000 mm 150 x 1800 mm 300 x 2000 mm
200 x 1800 mm
Max. grinding surface 100 x 270 mm 200 x 640 mm 300 x 750 mm
Belt speed 10 m/s; 20 m/s 10 m/s; 20 m/s 10 m/s; 20 m/s
Voltage 400 V, 50 Hz, 3-phase 400 V, 50 Hz, 3-phase 400 V, 50 Hz, 3-phase
Motor rating (pole-switching) 0.65 kW/0.9 kW 1.4 kW/1.85 kW 3.4 kW/4.2 kW
Mode of operation S1 S1 S1
Protection class IP 54 IP 54 IP 54
Dimensions A 335 mm, B 240 mm, A 725 mm, B 275 mm, A 820 mm, B 278 mm,
C 530 mm, D 300 mm, C 940 mm, D 540 mm, C 1070 mm, D 540 mm,
E 540 mm, F 240 mm, E 930 mm, F 350 mm, E 1050 mm, F 470 mm,
G 470 mm G 610 mm G 760 mm
Dimension angle table 190 x 130 mm 190 x 220 mm 190 x 320 mm
Weight 35 kg 55 kg 75 kg
Colour Grey RAL 7040, Grey RAL 7040, Grey RAL 7040,
Red RAL 3020 Red RAL 3020 Red RAL 3020
Included in delivery: Connecting cable without plug.
Ordering data C 100 S C 200/150 S C 300 S
Flat belt grinding machine 648 051 000 648 058 000 648 053 000
Accessories
Angle table, pivoting, with transverse stop 480 010 070 480 010 080 480 010 090
Deburring and chamfering device 480 020 000 480 060 000 480 020 020
min. fase width: 0,5 x 45° at sheet metall width min. 2 mm max. fase width: 3,5 x 45° max. fase width: 10 x 45° max: fase width: 7 x 45°
Flexible grinding plate 480 020 050 480 020 060 480 020 070
Spare grinding plate 480 511 000 480 581 000 480 521 000
KTA 900 compact dry separator as worktable See page 13
Stand with dust compartment See page 12
Grinding and nonwoven belts See page 28
Spare- and wearparts on demand
9