CURVECUTTER DELTA 1500 - Spiro International SA
CURVECUTTER DELTA 1500 - Spiro International SA
CURVECUTTER DELTA 1500 - Spiro International SA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EN<br />
<strong>CURVECUTTER</strong> <strong>DELTA</strong> <strong>1500</strong><br />
since 1956
<strong>CURVECUTTER</strong> <strong>DELTA</strong> <strong>1500</strong><br />
The machine is designed especially to cut out<br />
segments of highest accuracy from a blank.<br />
• Up to 9 different program settings from diameter 100-<br />
<strong>1500</strong> mm. Simple input for all kinds of bends, flat oval<br />
bends, angle cuts and insulation fittings. An additional<br />
program makes it easy to recall pre-selected fittings by a<br />
simple code<br />
.• Accurate cutting of segments with high repeatability<br />
due to high-tech servo motors. No burrs, no hardening<br />
of the edge, due to cutting with 4 roller – shears.<br />
1 elbow 200 mm with 4 segments is cutting in 1 path<br />
within 15 seconds.<br />
• The Delta <strong>1500</strong> is the ideal combination machine for a<br />
high production line together with the SPIRO Rollformer,<br />
Stitchwelder and Gorelocker.<br />
Display of programs
Ventilation and Insulation<br />
Bends Round and flat - oval<br />
Offset<br />
Twisted Bends<br />
Technical Data<br />
Max. sheet width:<br />
Thickness range:<br />
1‘500 mm<br />
• galvanised steel 0.4 - 1.1 mm<br />
Dome<br />
• stainless steel 0.4 - 0.6 mm<br />
Cutting speed:<br />
2 to 10 m/min.<br />
Segment angle: 5 - 46° (in steps of 1/10<br />
degree)<br />
Elbow diameter:<br />
100 - 1‘500 mm (in steps of<br />
1 mm)<br />
Number of cutter:<br />
1 - 4 / selectable on controller<br />
Data subject to change without notification
since 1956<br />
SPIRO S.A.<br />
is the world leader in the development and manufacture<br />
of machines for the production of spiral lockseam tubes<br />
and fittings, mainly for the ventilation industry.<br />
SPIRO S.A.<br />
is also a leading supplier of fittings and system solutions<br />
for the ventilation and air-conditioning industry.<br />
We are looking forward to your visit at our Demo Centre<br />
in Switzerland to demonstrate our machines.<br />
Contact us for detailed brochures and a CD_Rom with<br />
video of machines.<br />
SPIRO S.A.<br />
Industriestrasse 173<br />
3178 Bösingen<br />
Schwitzerland<br />
Phone +41 31 740 31 00<br />
Fax +41 31 740 31 31<br />
www.spiro.ch<br />
info@spiro.ch<br />
Subject to technical improvements and changes without prior notice.<br />
© 08.2004 SPIRO S.A. Any form of reprinting and copying is prohibited without written permission. SPIRO®<br />
and are registered trademarks. The products, systems and product names of SPIRO S.A. are protected by<br />
intellectual property rights.<br />
Delta <strong>1500</strong> | 09.2008