03Lathe-Part 1.pdf

More documents

Recommendations

Info

Headstock Nose of the head stock, where various work holding devices may be fitted Dr. Amr Shehata Fayed Lathe – Page 24
Lathe Bed • The Bed forms the base of a Lathe machine. • It provides a heavy rigid frame on which all the other basic components are mounted. It must be rigid enough to resist deflection in any direction under load. • The bed is made of cast iron or a steel weldment, in a box or I‐beam shape, and is supported on legs, a cabinet, or a bench. • The headstock and the tailstock are located at either end of the bed and the carriage rests over the Lathe bed and slides over it. Dr. Amr Shehata Fayed Lathe – Page 25
Page 2 and 3: What is the lathe? • Lathe is a m
Page 4 and 5: Types of Lathe Automatic Lathe A la
Page 6 and 7: Engine lathes • The modern engine
Page 8 and 9: Turret Lathes • Semi‐automatic.
Page 10 and 11: Numerical Control Lathe and Turret
Page 12 and 13: Block Diagram of Standard Engine La
Page 14 and 15: Lathe Machine spindle chuck tool-po
Page 16 and 17: Lathe Basics Dr. Amr Shehata Fayed
Page 18 and 19: Lathe Basics Bedways Dr. Amr Shehat
Page 20 and 21: Lathe Basics Tailstock Dr. Amr Sheh
Page 22 and 23: Headstock • The headstock is the
Page 26 and 27: • The ways of the lathe are the f
Page 28 and 29: Tailstock • For drilling use a dr
Page 30 and 31: Lathe Carriage and Apron Dr. Amr Sh
Page 32 and 33: Carriage Feed • Longitudinal Feed
Page 34 and 35: Apron Hand Wheel Apron Hand Wheel T
Page 36 and 37: Power Feed Clutch Engages the power
Page 38 and 39: Carriage Parts • Carriage consist
Page 40 and 41: Saddle Dr. Amr Shehata Fayed Lathe
Page 42 and 43: Cross Slide • This is the part th
Page 44: Compound Rest • It can also be ro

03Lathe-Part 1.pdf

Create successful ePaper yourself

Delete template?

Save as template?