591/595 Brochure - Sterner Lighting

infranor
SERIES 591/595
Precision Floodlighting

INFRANOR SERIES 591/595
The Infranor Series 591/595 luminaire is a work horse for applications where an ordinary floodlight cannot
provide enough illumination. With over (30) distributions to choose from, including a 1,234,000 CD (6° x 5°)
spot, the 591/595 is perfect for those difficult applications. Such applications include bridges, high rises,
steeples and water towers, just to name a few.
S E R I E S 5 9 1 / 5 9 5 F E A T U R E S & B E N E F I T S
(595 shown below)
rugged cast
aluminum
housing
with low copper content
for additional resistance
to corrosion. Finned for
additional heat dissipation,
increasing lamp and electrical
component life.
595 attached
ballast box
separates ballast from the
housing to reduce wear due
to heat, increasing lamp and
electrical component life.
5/16” thick
steel yoke
for full range of aiming and
orientation along with ease
of installation.
591 CAST remote
b allast box
can be installed in an easy
to access maintenance
friendly location.
dual safety
cable
door hinge prevents
accidental dropping during
fixture maintenance.
multi-faceted
optics
with (19) MH and (15) HPS
rectangular /spot
distributions to choose from.
patented la mp
stabilizer
prevents lamp sag from
gravity and vibration, in
turn maximizing optical
performance and lamp life.
spring loaded
steel formers
ensures repeatable optical
performance and durability
from handling and
thermodynamic characteristics.
LAMP
BULB
TYPE
ORIENTATION
BEAM
50% MAX CD 10% MAX CD NEMA MAX
(V X H) (V X H) (V X H) CANDLEPOWER
1000MH
BT56
Axial
Horizontal
Horizontal
Horizontal
Horizontal
Vertical
Vertical
Vertical
Vertical
Vertical
SP1 6.0 x 5.0
18.0 x 16.0 2 x 1 1,254,000
SP2 4.0 x 19.0 9.0 x 27.0 0 x 2 1,146,000
RN1 7.0 x 28.0
13.0 x 38.0 1 x 3
467,000
RN2
5.9 x 41.0 12.5 x 63.1 1 x 4 379,400
RN3
5.9 x 58.0 13.2 x 85.0 1 x 5
236,900
RM1 25.1 x 20.0 42.0 x 37.0 3 x 3 222,150
RM2 21.8 x 40.0 42.0 x 75.0 3 x 5
153,000
RM3 24.5 x 54.3 42.0 x 79.0 3 x 5
114,500
RM4 25.5 x 60.8 52.0 x 109.0 4 x 6 98,200
RW1 50.0 x 78.0 114.0 x 130.0 6 x 6
48,431
1000HPS E25 Axial
SP1 6.6 x 6.9 18.7 x 25.6 2 x 2
812,400
Horizontal
SP2 8.8 x 27.1
13.8 x 60.8 1 x 4
669,500
Horizontal
RN1 8.1 x 51.6 22.9 x 89.2 2 x 5
204,900
Horizontal
RN2
7.3 x 56.9
17.1 x 97.5 1 x 5
201,820
Horizontal
RM1 25.0 x 52.0 108.0 x 99.0 6 x 5
117,600
Horizontal
RM2 38.0 x 55.6 120.8 x 100.0 6 x 5
85,970
Horizontal
RM3 48.5 x 65.7 122.0 x 110.0 6 x 6 72,085
Horizontal
RW1 75.9 x 66.7 126.2 x 111.8 6 x 6 51,100
Notes: Optics can be rotated 90 degrees (minus the SP1), denoted by an 'R' (eg. 'RN1R').
By rotating the optics 90 degrees, lamp orientation rotates as well.
SP1 reflector cannot be rotated.
Visit our website at www.sternerlighting.com for additional photometric information not listed.

ORDERING SEQUENCE
Item Sequence:
1
2 3
4
5
6
7
8
9
10
ORDER
NUMBER:
HOUSING
LAMP
WATTAGE
BEAM
PATTERN
VOLTAGE
BALLAST
MODEL
STYLE
MOUNTING
OPTIONS
SHIELD
OPTIONS
GENERAL
OPTIONS
FINISH
591
(remote)
595
(attached)
1. HOUSING
1000MH
1000HPS
SP1
SP2
RN1
RN2
RN3 1
RM1
RM2
RM3
RM4 1
RW1
(rotated 90° )
SP2R
RN1R
RN2R
RN3R 1
RM1R
RM2R
RM3R
RM4R 1
RW1R
120
208
240
277
347
480
26.56" SQ.
(591)
15.28"
(595)
C
YK
BP
WB
SF
PD
N
26.56" SQ
TS
3S
4S
3L
CS
N
FL
SC
PRL 2
NOTE: 1) ’RN3’, ’RN3R’, ’RM4’, ’RM4R’ not available in ’1000HPS’.
2) ’PRL’ is not available in the ’591’ version.
N
15.28"
BK
BZ
WH
AL
NS
7.55"
15.94"
34.22"
top view
8.00" 4.00"
14.75"
14.31"
37.03"
8.28"
18.75"
EPA:
3.75"
6.00"
4.60 (fixture only)
9.00"
0.44" dia
(4) holes
0.81" dia
2. LAmP WaTTagE
H A L I D E
(1000MH)
S O D I U M
(1000HPS)
4. VOLTAGE
(120) (208) (240) (C) Core & Coil
(277) (347) (480) (Core & coil ballast is high-power factor and rated for -20°F (-28.9°C).)
TOP SHIELD
(SP1)
9.00"
(SP2)
Watertight cord connector
(2) supplied
3. BEAM PATTERN
(RN1)
8. SHIELD OPTIONS (Standard shield finish is black unless otherwise specified)
(TS)
BT56
E25
FIXTURE WEIGHT: 85LBS.
REMOTE BOX WEIGHT: 50 LBS.
7. MoUNTING OPTIONS
3.00"
1.38"
Cast ductile iron
surface base
3/4" mounting
hardware
0.38"
(3S)
(RN2)
(RN3)*
0.44" dia
(4) holes
21.97"
3.75"
6.00"
0.81" dia
EPA: 4.60 FIXTURE WEIGHT: 124 LBS.
(RM1)
(RM2)
(SP2R) (RN1R) (RN2R) (RN3R)* (RM1R) (RM2R) (RM3R) (RM4R)* (RW1R)
NOTE: *'RN3', 'RN3R', 'RM4', 'RM4R' not available in '1000HPS'.
(SP = spot, RN = rectangular narrow, RM = rectangular medium, RW = rectangular wide, R = optics rotated 90°)
(RW1)
5. BALLAST
THREE SIDED
(N)
NOT REQUIRED
(4S)
5.63"
FOUR SIDED
Removable
splice inspection
cover
Cast tenzalloy fitter
(3L)
1/2" set
screws
Removable
hole plug for
side yoke
mounting
THREE LOUVER
(CS)
(RM3)
6. MODEL STYLE
(BP) Base Plate
(WB) Wall Bracket
(SF) Slip Fitter
(PD) Base Pad
(Anchors supplied by others) (Anchors supplied by others) 3.44"
(Anchors supplied by others)
0.56"
1.81"
1.16"
To fit 2.00" (2.38" o.D.)
2.06"
0.56"
(4)
3/8" locking
pipe tenon x 4.00" long
I.D.
(4)
6.00" dia.
bolt
(min.)
bolt circle
3/4" mounting
6.00" dia.
Can be mounted
3.13"
hardware
bolt circle
to 2.00" pipe (max) with
Removable
6.00"
U-bolts (U-bolts
pipe plug for
6.00"
5/8" pivot by others).
installing
bolt
water-tite
3/4" mounting
connector
hardware
(supplied)
1.50"
Cast ductile iron
wall bracket and
horizontal sector
5.50"
8.00"
3.50"
1.50"
3.50"
0.56"
4.50" (4)
Water-tite
connector
(YK)
Yoke
CONCENTRIC
(RM4)*
9.00" 9.00"
9.00"
6.25"
2.38" (2.00" sch. 40
O.D. steel pipe)
All components steel
welded construction
0.25"
(N)
Not Required
9. GENERAL OPTIONS 10. FINISH
(FL) FUSE LUMINAIRE (PRL)* PHOTOCELL RECEPTACLE LUMINAIRE (BK) BLACK
(WH) WHITE
(SC) SAFETY CABLE (N) NOT REQUIRED
(BZ) DARK BRONZE (AL) NATURAL ALUMINUM
(NS) NON-STANDARD
NOTE: *’PRL’ is not available in the ’591’ version.

INFRANOR 591/595 WRITTEN SPECIFICATIONS
HOUSING
The luminaire housing shall be cast
aluminum and octagonal in shape with
integral fins for heat dissipation. The luminaire
housing, including the wire entrance, shall be
completely sealed from the outside environment.
The cast aluminum alloy shall contain less than
2/10 of 1% copper for resistance to corrosion including
marine applications.
LENS & DOORFRAME
The luminaire lens shall be clear tempered glass, 0.188" thick, thermal and
impact resistant. Lens shall be set into a cast aluminum doorframe which is
secured with (8) plated steel fasteners and sealed with a E.P.D.M. gasket for a
watertight seal.
REFLECTOR
The optical assemblies shall consist of precision die-cut steel formers, with
spring loaded facets of a high purity annodized or patterned specular
aluminum in a choice of forms to provide rectangular narrow, medium or
wide beam patterns. Spot distributions shall be provided by a spun reflector of
high specularity. All reflectors shall include Sterner’s patented lamp stabilizer
to prevent lamp sag and to maximize lamp life and overall efficiency.
YOKE
The luminaire yoke shall be of formed steel 0.31" thick and 2.50" wide. Yoke
shall allow for infinite aiming positions within its aiming range.
ELECTRICAL MODULE
Luminaire shall be cULus listed for use in wet locations and manufactured
from UL recognized electrical components. Electrical assembly is easily
accessible through the ballast box. Each high power factor ballast is capable of
starting temperatures down to -20°F (-28.9°C) and shall be CWA. The socket
shall be a mogul-based porcelain socket with a 4KV rating (5KV for
1000HPS). Fixture shall be equipped with a watertight connector and 3' of
16/3 STO-W cord.
LAMP
Luminaire shall accept the following lamps:
1000MH BT56
1000HPS E25
REMOTE MOUNTED & ATTACHED BALLAST BOX
Ballast shall be housed in a cast aluminum housing with heat dissipating fins
and supplied with (2) watertight connectors. Ballast box shall have a cast
aluminum cover and is secured with (6) plated steel fasteners. 1000MH
remote box shall be capable of mounting at a distance of 200' (based on 10-
gauge wire and 1% voltage drop). 1000HPS remote box shall be capable of
mounting at a distance of 75' (includes long range starter). The cast
aluminum alloy shall contain less than 2/10 of 1% copper for resistance to
corrosion including marine applications.
Wooddale Church, Eden Prairie, MN
FINISH
Finished parts are washed in a multistage phosphate processing system and
finished with a polyester urethane powder coat paint. Standard colors are dark
bronze, black, white, and natural aluminum. Contact factory for nonstandard
colors.
Hubbell Lighting, Inc.
101 CORPORATE DRIVE
SPARTANBURG, SC 29303
All trademarks mentioned herein are the property of their respective owners.
In the interest of continuous product improvement, Sterner Lighting
reserves the right to change specifications without notice.
TEL 864.599.6000 FAX 864.699.4740
www.sternerlighting.com
© 09/05