Hybrid Stepper Motor Linear Actuators - DJ Stork Drives AB

43000 Series (Size 17) Dual Motion Actuators
HaydonKerk Motion Solutions TM • www.HaydonKerk.com • Phone: 800.243.2715 • International: 203.756.7441
Technical
Specification
Dimensional Drawings
Linear
Travel / Step
inches mm
0.000078* 0.00198*
0.00012* 0.0030*
0.000156259* 0.0039*
0.0003125* 0.0079*
0.0004167* 0.0105*
0.00048* 0.0121*
0.0005* 0.0127*
0.000625* 0.0158*
0.00078* 0.02*
0.0008333* 0.0211*
0.00096* 0.0243*
0.001* 0.0245*
0.00125* 0.0317*
0.00192* 0.0487*
0.002* 0.0508*
*Values truncated
Standard motors are Class B
rated for maximum
temperature of 130°C.
Order
Code
I.D.
V
N
P
A
S
J
3
B
AD
T
Q
1
C
R
2
Standard strokes available:
1” (26 mm), 2” (51 mm) and
4” (102 mm). Customized strokes
available to 6” (152 mm)
43000 Series Size 17 • Rotary Function • Bipolar • 100% Duty Cycle
Torque curves for 43000 Series Linear Actuators. See FORCE/SPEED curves for 43000 Series Linear Actuator
on pages 77 and 78.
NOTE: All chopper drive curves were created with a 5 volt motor and a 40 volt power supply.
Ramping can increase the performance of a motor either by increasing the top speed or getting a heavier load
accelerated up to speed faster. Also, deceleration can be used to stop the motor without overshoot.
With L/R drives peak force and speeds are reduced, using a unipolar drive will yield a further 30% force reduction.
Page numbers represent Printed Catalog pages
101