Data Aire DAP III LonWorks Protocol Integration Information
Data Aire DAP III LonWorks Protocol Integration Information
Data Aire DAP III LonWorks Protocol Integration Information
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Network Variable Network Variable Type Description<br />
nviStandby SNVT_switch Standby Mode – Unit on/off control.<br />
See the nvistandby description below<br />
for details.<br />
nviFanSpeed SNVT_lev_cont Plug Fan Speed control 30-100%<br />
5 Network Variables Description<br />
5.1 nvoReturnTemp<br />
nvoReturnTemp contains the current return air temperature.<br />
5.2 NvoDiscTemp (optional)<br />
nvoDiscTemp contains the current discharge air temperature. This is an optional nvo, it requires a<br />
optional discharge air temperature sensor to be installed to the <strong>DAP</strong> <strong>III</strong> controller.<br />
5.3 NvoWaterTemp (Optional)<br />
nvoWaterTemp contains the current chilled water temperature. This is an optional nvo, it requires<br />
an optional chilled water temperature sensor to be installed to the <strong>DAP</strong> <strong>III</strong> controller.<br />
5.4 nvoHumidity<br />
nvoHumidity contains the current space humidity.<br />
5.5 nvoCoolStagesOn<br />
nvoCoolStagesOn contains the current number of cooling stages in use.<br />
5.6 nvoHeatStagesOn<br />
nvoHeatStagesOn contains the current number of heating stages in use.<br />
5.7 nvoHumidifying<br />
nvoHumidifying contains the current state of the humidifier.<br />
Humidifier value state<br />
Off 0 0<br />
On >0 1<br />
Document 600-000-685 8
Change language