290.126 Berg-hskGripper-hk-hkr-Introduction.indd - TAC Rockford
290.126 Berg-hskGripper-hk-hkr-Introduction.indd - TAC Rockford
290.126 Berg-hskGripper-hk-hkr-Introduction.indd - TAC Rockford
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BERG HSK Gripper HK / HKR <strong>Introduction</strong><br />
<strong>290.126</strong><br />
07/2007 / Page 1 of 2<br />
Uncontrolled Document<br />
Why do leading manufacturers of high performance machining centers<br />
rely on BERG HK and HKR grippers?<br />
HK/HKR grippers reduce chip-to-chip time!<br />
Latest technology low friction surface coating requires no lubrication<br />
» The special coating means that HK and HKR grippers consistently transmit clamping force to<br />
the tool holder, ensuring that tools are always securely clamped. In addition, lubrication or<br />
other maintenance is never required, reducing overall machine maintenance requirements.<br />
HKR model dramatically reduces chip-to-chip time<br />
» The HKR gripper’s patented “snap-hold” function holds a tool in the spindle in the unclamped<br />
position, allowing a tool to be changed independently of the clamp and release cycle of<br />
the drawbar system. This feature reduces the chip-to-chip time and therefore the nonproductive<br />
time considerably. In customer applications, 0.4 to 0.5 seconds per tool change<br />
cycle are saved.<br />
Additional features and benefits of the HK and HKR grippers<br />
» A short clamping stroke and a compact spring package can be used because of the gripper’s<br />
4-5x force intensification.<br />
» Simple and safe installation without the need for special tools.<br />
» Large center bore allows for high coolant flow.<br />
» Simple to machine and measure spindle contour facilitates spindle production.<br />
» Suitable for horizontal and vertical machine spindles.<br />
» Competitive pricing means that an HSK spindle does not need to cost much more than a<br />
standard taper spindle.
BERG HSK Gripper HK / HKR <strong>Introduction</strong> <strong>290.126</strong><br />
Applications for HK and HKR grippers<br />
» High performance machining centers<br />
» Turn-mill centers<br />
» Universal milling machines<br />
» Gantry type milling machines<br />
» Woodworking machines (routers)<br />
» High performance metal spinning machines<br />
» Milling heads<br />
07/2007/ Page 2 of 2<br />
Uncontrolled Document<br />
Technical data and sizes of the HK and HKR gripper<br />
Model Clamping Actuation Actuation Stroke HSK Size<br />
Force (kN) Force (kN) Nominal (mm) Max. (mm) A, C, E B, D, F<br />
HK 30 / HKR 30 7.00 1.70 5.00 8.50 40 50<br />
HK 38 / HKR 38 14.00 3.50 5.50 9.00 50 63<br />
HK 48 / HKR 48 22.00 4.70 6.40 10.00 63 80<br />
HK 60 / HKR 60 35.00 6.60 7.40 11.00 80 100<br />
HK 75 / HKR 75 52.00 11.00 8.00 12.00 100 125<br />
Individual grippers or complete drawbar systems are available.<br />
Additional BERG products:<br />
» Clamping systems for tool clamping<br />
» Clamping systems for workpiece clamping<br />
» Clamping systems for forming technology<br />
» Clamping systems for special applications<br />
For more information on BERG products, visit us on the web at www.transconn.com.