26.09.2014 Views

ProCoat Latex Drywall Primer - Cloverdale Paint

ProCoat Latex Drywall Primer - Cloverdale Paint

ProCoat Latex Drywall Primer - Cloverdale Paint

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>ProCoat</strong> <strong>Latex</strong> <strong>Drywall</strong> <strong>Primer</strong><br />

05720<br />

Formulated and Manufactured<br />

in Surrey, British Columbia<br />

SURFACE PREPARATION<br />

All Surfaces<br />

All surfaces must be clean, dry, free of powdery materials<br />

and loose or scaling paint. <strong>Drywall</strong> joints must be thoroughly<br />

dry and free from sanding dust. A lower porosity "topping mix"<br />

is recommended as the final drywall compound coat for more<br />

uniform sheen. Sand lightly on the board areas to avoid nap<br />

raising. Use only at temperatures above 10°C (50°F).<br />

WARNING! If you scrape, sand or remove old lead paint from any<br />

surface you may release lead dust. LEAD IS TOXIC. EXPOSURE<br />

TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN<br />

DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN<br />

SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved<br />

respirator to control lead exposure. Carefully clean up with a<br />

wet mop or HEPAvacuum. For additional information, Canadian<br />

customers contact the Product Safety division of Health Canada<br />

at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead<br />

Information Hotline at 1-800-424-LEAD (5323).<br />

RECOMMENDED TOPCOATS<br />

Pre-<strong>Paint</strong>ed Surfaces<br />

De-gloss by sanding and must be soundly adhering prior to<br />

repainting.<br />

Wood<br />

N/A<br />

Masonry<br />

Conventional solvent or waterbased architectural paints<br />

<strong>Drywall</strong><br />

Conventional solvent or waterbased architectural paints<br />

Steel<br />

N/A<br />

SAFETY PRECAUTIONS<br />

For detailed information please refer to MSDS<br />

Warning<br />

Keep from freezing. USE WITH ADEQUATE VENTILATION. Close<br />

container after EACH use. Keep out of reach of children.<br />

Do not take internally.<br />

First Aid<br />

In case of eye contact, flush immediately with plenty of water<br />

for at least 15 minutes. Wash contaminated skin with soap and<br />

water. If ingested, call physician or the Poison Control Centre<br />

immediately.<br />

RECENT AMENDMENTS<br />

Check for recent amendments to this data sheet at<br />

www.cloverdalepaint.com<br />

LIMITATION OF LIABILITY<br />

To the best of our knowledge, the technical data contained<br />

herein ar true and accurate at the time of issueance but are<br />

subject to change without prior notice. We guarantee our product<br />

to conform to the specifications contained herein.<br />

WARRANTY DISCLAIMER<br />

<strong>Cloverdale</strong> <strong>Paint</strong> manufactures quality products. In the event<br />

that this product is defective or in any way unsuitable for the<br />

application for which it is sold, <strong>Cloverdale</strong> <strong>Paint</strong> Inc. will replace<br />

the product free of charge. The warranty provided by this data<br />

sheet is the only warranty or guarantee of quality made in<br />

respect of this product by <strong>Cloverdale</strong> <strong>Paint</strong> Inc. By purchasing<br />

this product the customer accepts this warranty in lieu of all<br />

others, and waives all claims to any other remedy arising from<br />

any warranty or guarantee of quality, whether such warranty or<br />

guarantee of quality was made expressly to the customer or<br />

implied by any applicable law.<br />

Read Label and Material Safety Data Sheet Prior to Use. Catalogue: 10-0080<br />

<strong>Cloverdale</strong> <strong>Paint</strong> Inc. 6950 King George Blvd. Surrey, BC V3W 4Z1 Canada Tel: 604.596.6261 Fax: 604.596.6261 www.cloverdalepaint.com<br />

Page 2 of 2<br />

Revision Date: October 27, 2011

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!