Tambour Tambour Tambour Tambour Tambour ... - Tambour Paints

tambourpaints.com

Tambour Tambour Tambour Tambour Tambour ... - Tambour Paints

Tambour Tambour Tambour Tambour Tambour Tambour Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

Tambour

White pure acrylic sealant coating for extremely

low temperatures up to -40°C

High flexibility of film

Renwable


Extreme Low Temp (-40°C) Roof Coating

Product Type:

White pure acrylic sealant coating for extremely low

temperatures up to -40°C.

Suggested uses:

sealing of flat roofs. Excellent adhesion to a wide

range of surfaces such as exposed concrete, asbestos

boards, non-treated wood and galvanized steel.

Surfaces such as modified bitumen and Polyurethane

foam require a specific primer (Please contact Serafon

for consultant).

Performance:

Extreme Low Temp (-40°C) Roof Coating meets all

of ASTM D 6083 requirements for 100% acrylic roof

coating. Please refer to the attached Technical

Service Report presenting Extreme Low Temp (-40°C)

Roof Coating’s performance.

Special features:

• High flexibility of film.

• Excellent adhesion to a wide range of surfaces

• Excellent protection against water, moisture and UV.

• Membrane is stable in low temperatures – based on a

low Tg polymer.

• Very low water absorption, improves the stability of

the membrane in tough conditions.

• Convenient application gives good coverage over

protrusions on the roof surface – such as antenna and

solar heaters.

• Energy saving sealant – there is a reduction of the

building temperature during the summer months. There

is no need to whitewash the roof annually.

• Renewable

Specifications of Extreme Low Temp

(-40°C) Roof Coating:

Appearance: Snow white paste

pH : 7.5-9.0

Solids content: 63% ± 3%

Viscosity: 45,000-80,000 cPs (Brookfield LVT 6 rpm at

25ºC)

Application instruction:

Minimum Application temperature: 5ºC minimum

Surface preparation: Clean the surfaces to be coated

from lime residue, dust, loose bitumen and any other

loose material. Wash the roof with running water and

wait until surface is completely dry before proceeding.

Primary layer: Dilute 1 part (by volume) of Extreme

Low Temp (-40°C) Roof Coating with 3 parts water and

spread on the surface to be treated. Wait until layer is

completely dry before proceeding (few hours).

Note – that unusual surfaces (such as burned bitumenes,

fresh new bitumenes, polyurethane foam and

so on) – require a specific primer. Please contact Serafon

for consultant.

Main layers (Standard Extreme Low Temp (-40°C)

Roof Coating as sealant):

1. Spread between 1-1.5 kg/ m2 undiluted Extreme Low

Temp (-40°C) Roof Coating. Wait 24 to 36 hours to ensure

layer is completely dry.

2. Apply second undiluted coat of Extreme Low Temp

(-40°C) Roof Coating – 1 kg/ m2. Allow layer to dry 24-36

hours. (Depending on existing weather conditions).

Can be applied by brush, roller.

General remarks:

• Extreme Low Temp (-40°C) Roof Coating is a readyto-use

paste. Drying time between layers depends on

existing weather conditions.

• A period of 72 hours of rain-free weather must be taken

into account when working with Extreme Low Temp

(-40°C) Roof Coating, in order to allow the coating to dry

completely.

• Minimum application temperature is 5ºC.

• Uneven surfaces greater than 3mm in height should be

filled with the following cement mixture: 1 part cement, 3

parts sand and 10% (calculated on the cement) Serafon

GENERAL BOND (or other acrylic additive to cement).

Add water as needed.

Cleaning:

Clean hands and tools with running water.

Shelf life:

12 months.

Storage:

Reseal original container tightly and store in cool, shaded

area. Prevent material from freezing.





Technical Service Report

Tzach Serafon / ATTN: Irena Shimshelashvill / Southern Industrial Area /

Ashkelon 78781 Israel / IrenaS@tambour.co.il

For further details:

www.Serafon.com

Technical services department: Tel: 972-8-6742100, Fax: 972-8-6742135

Email: Serafon@Tambour.co.il

Tzach-Serafon, southern industrial zone, Ashkelon 72829











For further details:

www.Serafon.com

Technical services department: Tel

Email: Serafon@Tambour.co.il

Tzach-Serafon, southern industrial z


For further details:

www.Serafon.com

Technical services departme

Email: Serafon@Tambour.co

Tzach-Serafon, southern ind

For further details:

www.Serafon.com Technical services department: Tel: 972-8-6742100, Fax: 972-8-6742135

Email: Serafon@Tambour.co.il

Tzach-Serafon, southern industrial zone, Ashkelon 72829

More magazines by this user
Similar magazines