Canterbury 15 HE - MR Hifi
Canterbury 15 HE - MR Hifi
Canterbury 15 HE - MR Hifi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Canterbury</strong> <strong>15</strong> <strong>HE</strong><br />
Built to special order only these audiophile loudspeakers are<br />
undoubtedly destined to become true family heirlooms<br />
T<strong>HE</strong> PRESTIGE RANGE
CANTERBURY <strong>15</strong> <strong>HE</strong><br />
The <strong>Canterbury</strong> <strong>15</strong> <strong>HE</strong> employs a Tannoy Dual Concentric TM driver<br />
whose computer designed Tulip Waveguide TM further enhances the<br />
'Dual's' point source symmetrical dispersion properties. Using an<br />
TECHNICAL SPECIFICATION<br />
PERFORMANCE<br />
Recommended amplifier power<br />
Power handling<br />
Power handling<br />
Maximum SPL<br />
Sensitivity<br />
Nominal impedance<br />
Frequency response<br />
Total harmonic distortion<br />
DRIVE UNIT<br />
Dual Concentric mid/bass frequency<br />
Dual Concentric high frequency<br />
Dispersion<br />
CROSSOVER<br />
Frequency<br />
Type<br />
Adjustment<br />
CABINET<br />
Enclosure type<br />
Volume<br />
Dimensions mm (inches)<br />
Material<br />
Weight kgs (lbs)<br />
Finish options<br />
50 - 275 watts<br />
140 watts RMS.<br />
575 Watts Peak<br />
117.5dB (140 Watts RMS)<br />
124.5dB (575 Watts Peak)<br />
93dB (2.83v @ 1m)<br />
8 ohms<br />
28Hz - 22kHz -6dB<br />
Less than 1.1% @ 140 watts RMS<br />
(50Hz – 20kHz)<br />
380mm (<strong>15</strong>") Dual Concentric TM driver<br />
utilising a paper pulp cone with <strong>HE</strong> twin<br />
roll fabric surround with 52mm round<br />
wire wound voice coil<br />
51mm (2") unit centrally mounted within<br />
the bass unit voice coil to achieve a true<br />
coincident acoustic point source. Tulip<br />
Waveguide and round wire wound voice<br />
coil.<br />
90 degrees conical<br />
1.1kHz<br />
Bi-wired, hard wired passive, low loss 2 nd<br />
order low frequency<br />
2 nd order compensated high frequency<br />
+/- 3dB over 1.1kHz to 22kHz shelving<br />
+ 2dB to – 6dB per octave over 5kHz to<br />
22kHz slope<br />
Dual Variable Distributed Port System<br />
235 litres<br />
1090h x 704w x 480d (43h x 27.7w x 18.9d)<br />
Birch ply. Extensively cross-braced internally<br />
and heavily damped<br />
63 (138.9)<br />
Walnut veneer and solid walnut edging<br />
and burr walnut trim detail.<br />
Alcomax 3 magnet version of this classic drive unit,<br />
it is constructed with a substantial high-pressure diecast<br />
380mm (<strong>15</strong>") chassis. New material is used in<br />
the construction of the <strong>HE</strong> (Hard Edge) twin roll fabric<br />
driver surround while the drive unit chassis incorporates<br />
an earthing facility. These features combine to provide<br />
fast, accurate bass with fluid, open midrange and<br />
clean high frequency performance.<br />
Birch ply, from Finland, is used for the enclosure<br />
construction with substantial internal bracing. The<br />
beauty of the walnut veneered cabinet is further<br />
enhanced with selected burr walnut wood veneers<br />
and completed with rich solid walnut mouldings.<br />
Gold plated terminals are provided allowing for the<br />
recommended option of Bi-wiring. Silver plated Van<br />
den Hul cable is used throughout the speaker. Along<br />
with the Hard-Wired crossover network and acoustic<br />
source aligning system this excellent cable ensures<br />
minimum signal degradation. Both treble level and<br />
roll off can be adjusted by means of high current<br />
switch blocks. A Variable Distributed Port System<br />
allows low frequency output to be tuned to suit<br />
any room.<br />
The <strong>Canterbury</strong> <strong>15</strong> <strong>HE</strong> loudspeakers are built to<br />
special order only. They are supplied with a certificate<br />
of ownership and a polished brass trim plate engraved<br />
with the owner’s name.<br />
Features: 380mm (<strong>15</strong>") Dual Concentric point source symmetrical<br />
dispersion driver assembled using a substantial high-pressure diecast<br />
chassis • <strong>HE</strong> hard edge twin roll fabric driver surround and<br />
driver chassis earthing provide fluid, open midrange and clean,<br />
detailed high frequencies • High frequency level and roll off fully<br />
adjustable • Cabinet construction of solid birch ply providing<br />
exceptional strength and rigidity, speeding up the aural response<br />
of the speaker • Extensive internal bracing reduces colouration,<br />
enhancing the midrange detail, speed and clarity of the bass •<br />
Bi-wired, hard wired adjustable crossover utilising premium quality<br />
components • Tuneable low frequency output with Variable<br />
Distributed Port System • Special order only supplied with certification<br />
of ownership.<br />
Tannoy Ltd. North Lanarkshire, ML5 4TF Scotland Tel: 01236 420199 Fax: 01236 428230<br />
Tannoy/TGI North America, 300 Gage Avenue, Kitchener, Ontario, Canada N2M 2C8<br />
Tel: 519 745 1<strong>15</strong>8 Fax: 519 745 2364<br />
Tannoy Nederland BV. Anthonetta Kuijlstraat 19, 3066 GS Rotterdam, Nederlands<br />
Tel: 010 2860555 Fax: 010 2860431<br />
www.tannoy.com<br />
Tannoy adopts a policy of continuous improvement and product specification is subject to change.<br />
Colours represented here are as accurate as the printing process allows.<br />
6843 0670