You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical Data Sheet<br />
<strong>Rostschutz</strong>-<strong>Grund</strong> <strong>TC</strong> <strong>5301</strong><br />
Anticorrosive, nitro-proof primer for interior and exterior use<br />
Free from aromatic compounds<br />
Product Description<br />
Application area<br />
Properties<br />
Colour<br />
Gloss level<br />
For interior and exterior use as a rust-preventing primer to protect all<br />
types of iron and steel.<br />
Free from aromatic compounds, good adhesion, solvent-free, leadfree.<br />
Anti-corrosive protective effect, high coverage, easy to work<br />
with. Quick drying, good base for subsequent coats, easy to sand.<br />
White, RAL3009-oxide red, RAL7001-silver grey<br />
Matt<br />
Density Approx.1.4 g/cm 3<br />
Base pigment<br />
Type of binder<br />
Components<br />
Product code<br />
Titanium dioxide<br />
Alkyd resin without aromatic compounds<br />
Alkyd resin, titanium dioxide, anti-corrosive pigments, various<br />
coloured pigments, fillers, white spirit, additives.<br />
M-GP02<br />
Application Guide<br />
Substrate<br />
In order to be suitable, substrates should be bondable, solid, dry,<br />
clean, and prepared in a professional manner We recommend<br />
adhering to VOB*, DIN 18 363, Part C, Sect. 3 (*Contract procedures<br />
for building works - Part C; General technical specifications for<br />
building works).<br />
Iron, steel: Prepare surfaces to the standard degree of purity SA 2 ½<br />
(blast cleaning) and ST 3 (mechanical) as per DIN EN ISO 12 944-4.<br />
<strong>Rostschutz</strong>-<strong>Grund</strong> <strong>TC</strong> <strong>5301</strong> Page 1/ 3
Technical Data Sheet<br />
Number of coats/<br />
application guide<br />
Substrates should be prepared ready for painting. Remove any dust,<br />
dirt, or greasy substances completely. Rust and mill scale should be<br />
completely removed, if necessary blast clean in accordance with SA 2<br />
½; in all cases clean at least down to bare metal. For interior use<br />
apply one coat of Tex-Color <strong>Rostschutz</strong>-<strong>Grund</strong> <strong>TC</strong> <strong>5301</strong>. For exterior<br />
use always apply two coats of Tex-Color <strong>Rostschutz</strong>-<strong>Grund</strong> <strong>TC</strong> <strong>5301</strong>.<br />
Tex-Color <strong>Rostschutz</strong>-<strong>Grund</strong> <strong>TC</strong> <strong>5301</strong> can be applied using brushes,<br />
rollers, or spraying equipment. Stir well before use; dilute with up to<br />
5% synthetic resin diluter if required. For spray coating adjust to a<br />
spraying consistency.<br />
Quantities Approx. 125 ml/m 2<br />
Diluting<br />
Drying time<br />
Application temperature<br />
Cleaning of tools<br />
Use synthetic resin diluter without aromatic compounds.<br />
At +20° C and max. 60% rel. humidity.<br />
Dust dry<br />
after approx. 1 hour<br />
Dry<br />
after approx. 3 hours<br />
Can be painted over after approx. 8 hours<br />
The temperature of the air and the substrate should be at least +5° C<br />
during application and drying.<br />
Immediately after use with white spirit or turpentine substitute.<br />
Notes<br />
Container sizes<br />
Storage<br />
VOC-content<br />
Safety advice<br />
Disposal<br />
0.750 l and 2.5 l<br />
Cool and dry, but free from frost<br />
Safety notice: EU limit value for this product (cat. A/i):<br />
500 g/l (2010). This product contains a maximum of 500 g/l VOC.<br />
Keep out of reach of children. In case of contact with the eyes or the<br />
skin, immediately rinse thoroughly with water. Do not allow the<br />
product to enter sewerage networks/watercourses/ground soil. Advice<br />
for users who are allergic to isothiazolinon: tel. +49 (0)800 6333378.<br />
Where necessary, the designation can be found in the safety<br />
information sheet.<br />
Containers should be completely empty before recycling. Dried waste<br />
material can be disposed of as household rubbish. Containers with<br />
liquid residue should be taken to a waste paint collection point. AVV<br />
waste classification regulations disposal code no.080111 (where<br />
applicable).<br />
<strong>Rostschutz</strong>-<strong>Grund</strong> <strong>TC</strong> <strong>5301</strong> Page 2/ 3
Technical Data Sheet<br />
This technical information is based on the latest state of the art and our experience of application technology. In view of the diversity of<br />
primers available and differing requirements of items that may be painted, the purchaser/user must retain responsibility for ensuring<br />
that materials manufactured by us are appropriate and technically suited for the intended application, under the actual conditions in<br />
which they will be used. The above information is not to be considered to be legally binding. This document will no longer be applicable<br />
should a new issue be published.<br />
Further information can be obtained by calling +49 (0)800 6333378.<br />
Technical information correct as of 04.2007<br />
Meffert AG Farbwerke<br />
Sandweg 15 ⋅ 55543 Bad Kreuznach<br />
Telephone +49 (0)6 71 / 8 70-0 · Fax +49 (0)6 71 / 8 70-397<br />
Application technology: +49 (0)6 71 / 8 70-326/327/329<br />
E-Mail: anwendungstechnik@meffert.com<br />
www.<strong>tex</strong>-<strong>color</strong>.de<br />
<strong>Rostschutz</strong>-<strong>Grund</strong> <strong>TC</strong> <strong>5301</strong> Page 3/ 3
Change language