Introduction and TMC-1 - TSL
Introduction and TMC-1 - TSL
Introduction and TMC-1 - TSL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
When a new<br />
component is<br />
added to the<br />
system it must be<br />
given a Name<br />
before the OK<br />
button becomes<br />
active.<br />
Highlight <strong>and</strong> select<br />
the modules that are<br />
to be added to the<br />
system.<br />
Give the module a<br />
Name.<br />
It is suggested (but is not essential) that the items are added to the System in the following<br />
order, as necessary:<br />
• Router(s)<br />
• Vision Mixer<br />
• UMD interface<br />
• System Controllers - Parallel I/O<br />
• System Tallies<br />
• Control Panels<br />
• Tallies – mapping <strong>and</strong> assignments<br />
Enter all mnemonics <strong>and</strong> names <strong>and</strong> then carry out all assignments for the UMDs <strong>and</strong> Tallies.<br />
It will be seen that each dialog screen contains all the assignment mapping requirements to<br />
do with the selected item. For example, a router source screen will allow the mnemonics,<br />
names tallies as assignments to the destinations or sources as required all from the one<br />
screen.<br />
<strong>Introduction</strong> <strong>and</strong> <strong>TMC</strong>-1 32 V2.1
Change language