JPA-1060 JPA-1120 JTP-10 JCP-10 JCR-10

R ECEIVER CONTROLS
10
13
11
9
12
2 8
FM/AM TUNER
EJECT
DIRECTION
PAUSE
F1
CH
AUTO REVERSE
3
CASSETTE RECEIVER
TUNE
B
A
ON AM/FM 1 2 3 4 5 6
0 10
LEVEL
1
4
7
6
5
1. TUNER ON SWITCH
This switch is used for supplying the power to tuner and display.
2. TUNER DISPLAY
You can confirm the frequency for tuner through this display.
3. TUNER LED
This LED indicates tuning for adsolute of AM and FM signals ensuring minimum distortion and maximum output.
4. BAND SELECTOR FM, AM
This switch is user for selecting FM1, FM2 or AM.
5. UP AND DOWN SWITCH
When these switches are pressed one time, FM/AM frequency is up or down with one step, and in case of
pressing over 2 seconds, the mode will change to "Auto scan".
6. PRESET SWITCH
These switches have be changed 6 kinds address form 1 yo 6, per each band.
If you want memorizing the broadcasting frequency press the switch over 2 seconds.
7. TUNER VOLUME
Adjust volume controller as you want by volume controller.
8. PAUSE BUTTON
A botton to temporary pause the operation in playing.
9. EJECT BUTTON
When you push this button, tape will be come out.
10. CASSETTE DOOR
You can start the cassette playback by inserting the cassette into this slot.
11. REW BUTTON
This is fast rewinding button toward .
12. FF BUTTON
It will be fast toward , when pushing it.
When pushing rew button and FF button simultaneously, tape direction will be reverse.
13. DIRECTION LED INDICATOR
This is for indicator for tape direction.
3