Place A Strip Of Masking Tape - Carba-Tec
Place A Strip Of Masking Tape - Carba-Tec
Place A Strip Of Masking Tape - Carba-Tec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
To our Valued Customers,<br />
Welcome to the first Focus Magazine for 2011. This edition is packed with products to inspire you and give you ideas for<br />
the woodworking year ahead. We have included some items from our new range as well as some old favourites. Our new<br />
catalogue is looking good and is well on the way to being finished. For updates on its progress, keep an eye on our website.<br />
In 2011, Focus will continue to bring you stories about people and woodworking, customer profiles, projects and reviews<br />
on our products.<br />
What is it about working with wood that captivates some of us for an entire lifetime? It’s partly the beauty of the raw material<br />
and the satisfaction of creating something real that you can stand before and say, “I made that”. There is also the<br />
personal challenge that drives you to improve your woodworking skills and learn new techniques.<br />
I was recently demonstrating a dovetail jig in our Brisbane store and two men who had been watching me started talking<br />
to each other about their respective projects. There was no awkwardness between these strangers, their shared interest<br />
in woodworking easily broke the ice and before long they were chatting like old friends. One of them had more experience<br />
as a woodworker than the other and I noticed how generous he was with his information. He wasn’t guarded about sharing<br />
his knowledge at all.<br />
This is a pretty typical scenario that can be seen in <strong>Carba</strong>-<strong>Tec</strong> ® stores throughout the country. There is a real sense of<br />
camaraderie amongst woodworkers and those little tips that are passed on can really help you to progress as well.<br />
With this in mind our Focus readers are invited to send in their favourite woodworking tips or tricks. The ones we feel will<br />
be of the most use to fellow woodworkers will be posted on our website.<br />
Email your contributions to focus@carbatec.com.au or post them to our Brisbane store address on the back of this<br />
publication.You can include photographs if you wish. If we choose to post your submission on our website we will only publish<br />
your name and the state that you live in.<br />
Happy Woodworking<br />
Carol Russell and the Focus Team
Without masking tape<br />
“<strong>Place</strong> a strip of masking tape<br />
around the ends of your timber when<br />
cutting dovetails on a router-based<br />
dovetail jig.”<br />
I can’t remember where this tip came<br />
from, I think it was an old Fine<br />
Woodworking Magazine originally,<br />
but it’s one of the simplest and most<br />
effective tips I have ever been given.<br />
I’ve used just about every form of<br />
dovetail jig there is. One thing that<br />
they all have in common is that the<br />
router bit is inclined to chip the timber<br />
out when you’re cutting dovetails.<br />
This can be very severe with some<br />
timbers and can destroy the effect of<br />
your perfect dovetails. It’s usually<br />
worse when cutting through<br />
dovetails, as you can’t do a climbing<br />
cut along the face to reduce the<br />
chipping out as you do with halfblind<br />
dovetails.<br />
Even if you still get some fibres<br />
chipping out they will stick to the<br />
masking tape and you can keep<br />
them and glue them back into place.<br />
Without the tape they end up lost in<br />
a pile of sawdust on the workshop<br />
floor.<br />
You will get a bit of a sticky build up<br />
on your router bit after a while, but<br />
this can be removed with mineral<br />
turps. Don’t use a fabric-based tape<br />
such as gaffer tape because the bit<br />
won’t cut through it easily. <strong>Masking</strong><br />
tape is definitely the best.<br />
With masking tape
Customer Profile: Roy Schack<br />
It’s easy to think, when you wade through the mountains of<br />
homeware and furniture products available across the<br />
country, that craftsmanship is something of a myth. A quaint<br />
concept belonging to a bygone era.<br />
However, Australia has a vibrant culture of professional<br />
woodworkers who produce exceptional quality studio<br />
furniture pieces. Many of them have opened their workshops<br />
to people wanting something more than a DIY level of<br />
woodworking skill. These people are looking to achieve<br />
excellence and learn traditional woodworking skills.<br />
Roy Schack is a fine woodworker who lives and works in<br />
Samford Valley near Brisbane. He runs The Brisbane<br />
School of Fine Woodwork, where he guides his students<br />
through all aspects of woodworking, from the correct use of<br />
hand tools and machinery to understanding timber,<br />
construction and design.<br />
Standing in his workshop located in a beautiful rural setting,<br />
I can’t imagine a more suitable environment to learn fine<br />
woodworking. Roy encourages his students to feel at home<br />
here and whilst they are attending classes, this becomes<br />
their workshop too. The students are from all walks of life<br />
and age groups and at least half are women. This is a<br />
gentle environment conducive to learning and creativity, a<br />
respite from the busy, noisy lives that many of them lead.<br />
Roy Schack wasn’t always a woodworker. A desire for a<br />
career change from merchant banking in 1993 led him to<br />
undertake a course in Town Planning.Whilst working on an<br />
assignment in the Mitchell Library in Sydney, he wandered<br />
into an exhibition of fine woodwork by the members of<br />
The Woodworkers’ Association of New South Wales. The<br />
‘For Tomorrow’ exhibition proved somewhat of a revelation.<br />
“I realised that some people do this for a living”, he had<br />
always thought of woodwork as a hobby. It was an epiphany<br />
of sorts: he knew for the first time in his life, what he wanted<br />
to do. Four months later, he was a student at the Sturt<br />
School for Wood.<br />
As you’re making a piece, fall in love<br />
with it and realise that near enough<br />
is not good enough.<br />
Top: Roy Schack works with some of his students in his Samford workshop.<br />
Bottom right: ‘One Thousand Plus’ in Scented Rosewood by Roy Schack<br />
Bottom photo by Rebecca Nathan
Roy studied under the late Tom Harrington, a person who<br />
had been an enormous influence on his work. Tom’s<br />
approach was to “keep it simple” and concentrate on the<br />
quality of the design and construction and not the “wow<br />
factor”.This advice struck a real chord and underpins Roy’s<br />
approach to both his own work and his teaching.<br />
For many of us, woodworking can be an impenetrable<br />
jungle of complicated mishaps and hours spent bringing our<br />
projects back from the brink of disaster. Roy tries to navigate<br />
around all of this noise. He distils his knowledge and relates<br />
it’s essence to students without them feeling bogged down<br />
or overloaded.<br />
He says that an important element for him when teaching,<br />
is that the students are able to trust in his ability to be able<br />
to help them find solutions to the problems they encounter.<br />
“It’s one thing to get an idea across, but to teach the<br />
students enough so they can start to teach themselves is<br />
another thing”.<br />
In his own work, it’s obvious he has a real affinity for the<br />
process, the material and the tools. The timber he uses in<br />
his furniture maintains the purity of its natural state. It never<br />
feels far from the tree. Roy has produced many fine studio<br />
furniture pieces that have featured in various Australian and<br />
international exhibitions. He is a member of the ‘MADE’<br />
group, a diverse collection of makers and designers in<br />
Queensland who are committed to raising the profile of<br />
studio furniture makers. Each year in Brisbane, the group<br />
stages an exhibition showcasing its work.<br />
To read more about Roy Schack and The Brisbane School<br />
of Fine Woodwork, go to www.carbatec.com.au<br />
www.royschack.com<br />
www.makersanddesigners.com.au<br />
by Gerry Coon<br />
There are not<br />
many things as<br />
rewarding as being<br />
able to custom make<br />
your own tools. Our<br />
Brisbane staff member, Gerry<br />
Coon, spent a wet weekend in<br />
the workshop and tried out our<br />
Veritas Spokeshave kits.<br />
I had a wonderful weekend in the shed working<br />
out the wooden spokeshave kits by Veritas.They are<br />
available in two imperial sizes. Blade lengths available<br />
are 1 7 ⁄8” (50mm) for the small one and a massive 2 3 ⁄4”<br />
(70mm) for the large one. Both are equipped with threaded<br />
thumbwheels and lock nuts for precise height adjustment, a tap for<br />
threading the thumbwheel and an A2 steel blade.Veritas also supply<br />
comprehensive instructions with the kit.<br />
For Gerry’s step by step instructions on how to make one of these beautiful<br />
spokeshaves go to www.carbatec.com.au<br />
Photo: Three stages of a Tulipwood<br />
spokeshave modelled on<br />
a traditional design.
Setting up a<br />
Lock Mitre Bit<br />
.Router bits open up a world of joinery possibilities. There are hundreds of joints<br />
that can be cut using them, but some are more approachable than others. <strong>Of</strong> all the<br />
router bits that we stock, the large CMT TM lock mitre bit can be one of the most<br />
daunting to use and is tricky to set up. However, the joint it creates is virtually<br />
indestructible and can be used both as a means to join mitres and parallel glue joints.<br />
It is excellent for use on solid timber and man-made products like MDF as it gives<br />
you enormous glue surface area.<br />
Although the instructions sound simple, experience tells us that there are a few<br />
things that are helpful to know. Firstly, it’s essential that your router table is flat and<br />
the fence is at 90° to the table surface. Like any mitre that you cut, everything must<br />
be square. I recommend using a fence of about 150mm in height for support. As<br />
this is a very large diameter bit, it is best to run it on a low speed, around 10,000<br />
RPM. If the bit is running well and you feel the cut could be a bit cleaner, it can be<br />
increased a fraction but err on the side of caution. Don’t machine timber that’s too<br />
narrow. Cut it wider and rip it down after machining. The vertical pass, particularly,<br />
can be very dangerous on narrow stock.<br />
Mark the centre of your material with a marking gauge, (Fig. 2) this mark needs to<br />
be lined up to the centre of the bit as is shown in Fig. X. This can be a bit difficult<br />
as the bit centre is located about half way along the bottom of the cutter finger. A<br />
height gauge is useful for pinpointing the centre although you will still find there is<br />
a degree of trial and error involved so be prepared to make a few sample cuts. Once<br />
you have your lock mitre joint how you want it, keep your sample as a set-up block<br />
for that material thickness next time.<br />
Mark out the sides of your box with the most decorative sides facing out (Fig. 1).<br />
The A pieces are machined horizontally with the face up. The B pieces are<br />
machined vertically against the fence with the face out. (Figs. 4 & 5)<br />
Don’t try and machine the full profile in a single pass.Three to four smaller passes<br />
will give you a cleaner cut and is much safer as there is a lot less resistance against<br />
the material than with larger cuts.The depth of cut is controlled by moving the fence<br />
out, away from the cutter to increase the amount being removed.<br />
Once the full lock mitre joint is cut check it for accuracy, you will probably need to<br />
adjust the height a fraction. If the horizontally cut piece (A) is too forward, raise the<br />
router bit by about half the error. Lower it if the vertically cut piece (B) is prominent.<br />
To cut parallel glue joints (Fig.Y) the set-up is the same, but all timber is cut in the<br />
‘A’ position, flat on the table surface.The joints are then matched by reversing them<br />
to one another. Be mindful that the first piece is machined with the face edge up,<br />
but the second cut is with the<br />
face edge down.<br />
Fig.Y<br />
After some initial trial and error,<br />
the lock mitre bit is sure to<br />
become a much-used addition<br />
to your tool cupboard.<br />
Fig. 1<br />
B.<br />
A.<br />
B.<br />
A.<br />
Fig. 2<br />
Fig. 3<br />
Fig. 4<br />
Fig. 5<br />
A.<br />
B. B.<br />
Fig. X<br />
Fig. 6<br />
A.
A Perfect Match<br />
by Tony Forbes<br />
A large number of hand held power tools that create dust<br />
and shavings have a small diameter dust port. When<br />
attaching extraction to them, it’s possible to reduce from<br />
your large dust extractors with 100mm diameter hoses,<br />
to the smaller dust outlets on your power tools. The<br />
problem with this is that a lot of air pressure is lost. This<br />
effect is similar to you trying to take deep fast breaths<br />
through a long drinking straw. There is only a certain<br />
amount of air that will fit through the opening of the straw<br />
no matter how much power you put into blowing. Using<br />
your large dust extractors for smaller machines is an<br />
inefficient use of their capacity.<br />
A better solution is a portable workshop vacuum that can<br />
be directly connected to your power tools such as;<br />
sanders, biscuit jointers and even router tables. The<br />
INOX-36 shop vac is specifically designed for this<br />
purpose. The full range of accessories that come with<br />
the INOX-36 also make it perfect for general cleaning in<br />
the workshop, house or car.<br />
These accessories include:<br />
• Stainless Steel Barrel<br />
• Wet/Dry operation with tip over safety cut-out<br />
• 1400 Watt motor<br />
• Tool triggered (Max. 800W) auto switch with<br />
manual override<br />
• Huge 5m long hose<br />
• Two piece stainless handle<br />
• Hard floor/carpet head<br />
• Small vacuum head<br />
• Wet surface head<br />
• Crevice tool<br />
The <strong>Carba</strong>-<strong>Tec</strong>® Dust Deputy is a cyclonic pre-separator<br />
designed to connect to your shop vac to increase its<br />
efficiency by trapping dust in the barrel and not in the<br />
vacuum. The Dust Deputy will capture 99% of the<br />
sanding dust that is extracted.<br />
A cyclonic system works in two stages. In the first stage,<br />
the dust is drawn into the top section or canister and is<br />
flung to the outside where it spirals down into the<br />
collection bucket. In the second stage, the air is then<br />
drawn into the vacuum cleaner where the remaining fine<br />
particles are captured by the vacuum filter. This process<br />
reduces the number of times you need to empty your<br />
shop vac and enables it to maintain a more consistent<br />
airflow. The life of your filters is also significantly<br />
increased.<br />
Together, the INOX-36 Industrial Dust Extractor and the<br />
<strong>Carba</strong>-<strong>Tec</strong>® Dust Deputy are a formidable team when it<br />
comes to keeping your workshop dust free.<br />
Dust Deputy saves wear<br />
and tear on vacuum filters<br />
The Inox-36 and<br />
Dust Deputy are<br />
ideal for router<br />
table extraction<br />
The Dust<br />
Deputy is easily<br />
connected to the<br />
Inox-36<br />
To read Tony Forbes’ article on the INOX-36 and the<br />
Dust Deputy go to www.carbatec.com.au<br />
Most of the shavings collect in<br />
the Dust Deputy bucket
y Jan Schilling<br />
It is unusual to visit a fine woodworker’s workshop and not find some<br />
Japanese saws (nokogiri) hanging on the tool rack. For people who<br />
haven’t encountered them, Jan Schilling offers some advice on using and<br />
selecting these distinctive tools.<br />
Japanese saws work very differently to western-style saws, their teeth<br />
are set in the opposite direction and the cut is made by pulling the saw<br />
towards the user. Because the cut is made on the upstroke with the blade<br />
in tension, the metal in the blades can be very thin.This leaves you with<br />
a very fine kerf (width of cut).<br />
In Japan, woodworkers traditionally work on tatami mats on the floor at<br />
a planing board, which is a multi-functional small flat bench with a<br />
sliding dovetail stop. These saws can be used in a sitting or standing<br />
position.<br />
Using a Japanese saw is a little different to the western-style tenon saw.<br />
To begin with you start your cut with the back of the blade not the tip.<br />
(Otherwise there is nothing to pull). As with a tenon saw you can use your<br />
thumb to guide the saw, however, be aware that the blade is really sharp<br />
and if it jumps it will leave a jagged cut on your finger. I have one to show<br />
for my carelessness. Angle the blade a little towards the stock and do<br />
not grip the very front of the handle, but hold it a bit further back.<br />
Saw gently, steadily and with only a little pressure, too much of either<br />
and you’ll wander off course. Also do not suddenly exert pressure or bend<br />
the blade or you’ll loose a few teeth and have a saw that will not cut<br />
perfectly straight.<br />
A tip if you are having trouble sawing straight is to draw a line both front<br />
and back of the stock, set a mirror behind the stock and as you saw,<br />
watch the blade and the line at the back of the stock and adjust your hold<br />
on the saw as necessary – works a treat.<br />
Generally Japanese saws have changeable blades. The teeth are too<br />
fine and the metal too hard to sharpen as you would western saws. If<br />
used with care though, you can easily get a couple of years out of a<br />
blade; depending on the amount of work you are doing and the hardness<br />
of your timber.<br />
Changing a blade is a simple matter of tapping the back front edge of<br />
the blade against a hardwood block. You will then be able to detach it<br />
easily.When you have inserted the new blade, tap it again, only this time<br />
with the spine of the saw – it is similar to putting a broom head on a<br />
handle.<br />
To read more of this article about Japanese saws go to<br />
www.carbatec.com.au<br />
Dozuki saws are used for joinery<br />
Japanese saws<br />
come in a<br />
variety of<br />
styles.
A. CROSSCUT FLEXIBLE<br />
CARPENTERS SAW.<br />
Blade length 300mm. Crosscut saw for<br />
carpenters and cabinetmakers.<br />
Z-15011 ..............................RRP $49.00<br />
B. CROSSCUT FLEXIBLE<br />
CARPENTERS SAW<br />
Blade length 250mm. Crosscut saw for<br />
carpenters and cabinetmakers, flexible<br />
blade allows flush cutting of dowels.<br />
Z-15006 ..............................RRP $44.00<br />
C. FINE TOOTH JOINERY SAW.<br />
Blade length 240mm. Very fine cut saw for<br />
dovetailing and other extremely precise<br />
accurate cuts.<br />
Z-7029 ................................RRP $54.00<br />
D. PANEL SAW. (PLUNGE CUT)<br />
Blade length 240mm. Fine cut saw for<br />
dovetailing, crosscutting and general<br />
cabinetmaking. This saw has a scribing<br />
tooth near the front edge, this gives the<br />
added capability of plunge cutting.<br />
Z-7026 ................................RRP $46.00<br />
E. GENERAL PURPOSE SAW.<br />
(PLUNGE CUT)<br />
Blade length 150mm. Fine cut general<br />
purpose saw suitable for dovetailing. This<br />
saw has a scribing tooth near the front<br />
edge, this gives the added capability of<br />
plunge cutting.<br />
Z-7010 ................................RRP $34.00<br />
JAPANESE<br />
Z-SAWS<br />
A.<br />
B.<br />
C.<br />
D.<br />
E.<br />
15% OFF<br />
760mm<br />
1520mm<br />
830-990mm<br />
NEW<br />
CNC SHARK PRO PLUS<br />
This new designed unit includes extruded aluminium deck and larger<br />
Z axis clearance. Includes 550 watt motor, 33,000rpm, table size of<br />
635 x 635mm. This unit has been sold on the US market, and has<br />
been getting rave reviews and fantastic feedback, appealing to both<br />
the informed CNC user, and entry level hobby user alike. This is a<br />
very portable machine and can offer consistent results and repeatability.<br />
This CNC machine is designed for routing all types of<br />
wood, routing or engraving plastics, and even etching or cutting tile.<br />
With some adaptation, non-ferrous metals could also be cut.<br />
CNC-PRO-PLUS.........................................RRP $5,995.00<br />
SALE $5,895.00<br />
NEW<br />
Extendable Legs<br />
CARBA-TEC ® HEIGHT ADJUSTABLE WORKBENCH.<br />
This heavy duty laminated solid oak workbench features a solid<br />
25mm thick work top, double thick front, back and sides, and heavy<br />
duty height adjustable steel legs. Supplied with both a front and<br />
end vice, four bench dogs and a solid wood stopper bar, this versatile<br />
and sturdy unit would be a great asset in any classroom<br />
or home workshop. WB-6030 ........RRP $799.00<br />
SALE $689.00
NEW<br />
NEW<br />
STOP RULE - 30CM. These are handy for layout and<br />
machine set-up, because the movable stop provides a reliable<br />
reference point. You can use them to locate saw fences, plot<br />
the position of hardware mounting holes, set the height of a<br />
saw blade or router bit, and draw lines parallel to any flat<br />
surface. The stop face is 2" wide for solid registration, and<br />
the ruler tip is 7/32" thick to provide a broad land when using<br />
the tool as a height gauge. 88N89-12 ..............RRP $29.00<br />
SALE $25.00<br />
VERITAS TM SPOKESHAVE KITS. Each kit includes an<br />
A2 steel blade, a brass wear strip, two brass lock nuts and<br />
adjustment thumb wheels, a tap, and complete instructions.<br />
05P33-40 Small - blade size: 1- 7 ⁄8” x 3 ⁄32” thick ...RRP $49.00<br />
SALE $44.00<br />
05P33-30 Large - blade size: 2- 3 ⁄4” x 1 ⁄8” thick ....RRP $53.00<br />
SALE $47.00<br />
CHINESE<br />
SCISSORS<br />
This style of scissors<br />
has been made for<br />
over 300 years in<br />
China. Hand forged,<br />
they have a hard steel<br />
layer (for the sharpened<br />
edge) laminated<br />
to a softer iron backing<br />
that supports the<br />
more brittle hardened layer. Overall lengths are 140 to 216mm.<br />
An excellent buy in traditional tools.<br />
45K10-10 Set of 4 ............................................RRP $15.00<br />
SALE $12.00<br />
BLACK BISON NEUTRAL<br />
PASTE WAX*<br />
Liberon Black Bison Fine Paste<br />
Wax is ideal for nourishing and<br />
protecting all types of wood,<br />
including lacquers and French<br />
polishes. Black Bison is well<br />
known for its quality and<br />
distinctive, pleasant smell. It is<br />
traditionally used on antiques but is<br />
also suitable for use on modern furniture and will enhance the<br />
natural beauty of wood whilst protecting it against dryness.<br />
LBN-004063 150ml Neutral ................................RRP $20.00<br />
*A $25.00 surcharge applies in<br />
addition to normal freight rates.<br />
SALE $18.00<br />
PAINTER’S PYRAMIDS<br />
Quick to set up, non-marking, and compact to store. Molded from<br />
a solvent-resistant polymer, they will not react with finishes or<br />
wood. The tip presents a small contact surface to prevent blemishing<br />
the finish, and is rounded to minimize denting the material.<br />
Each support is 50mm high and has a load rating of 90kg.<br />
A real time saver. 88K58-70 Pack of 10 .................RRP $8.00<br />
SALE $7.00<br />
PLASTIC DRILL STOPS.<br />
This pair of stops fits all drill bits<br />
from 3mm - 13mm. The smaller<br />
one takes bits from 3mm - 6mm,<br />
and the larger takes 6mm -<br />
13mm bits. Designed with<br />
double-ended collets inside<br />
threaded sleeves. Made in USA.<br />
30g.<br />
86K65-01 ..............RRP $8.00<br />
SALE $7.00<br />
Colour<br />
may vary.<br />
DIGITAL ANGLE RULE.<br />
Overall length 400mm, 200mm when folded. Will measure from<br />
0° to 360° in 0.1° increments. Digital display can be zeroed at<br />
any location. A hold button to freeze your last reading is<br />
conveniently located near the readout. 3V CR2032 Lithium<br />
battery included. DAR-200.................................RRP $35.00<br />
SALE $29.00<br />
CARBA-TEC ® HOLD DOWN<br />
CLAMPS<br />
Made from anodised aluminium. The large<br />
clamp will hold up to 75mm high x<br />
85mm wide, the smaller one is<br />
higher and will hold<br />
90mm high x 70mm<br />
wide. They are designed to<br />
fit into a 1/4" or 5/16" T-track. Ideal<br />
for router tables or jigs. We recommend the range of Veritas T-<br />
slot tracks. CYH-283 - large .................................WAS $11.00<br />
NOW $9.00<br />
CYH-912 - small....................................................WAS $9.00<br />
NOW $7.00
TRITON ®<br />
WOODRACK - STORAGE<br />
SYSTEM WRA001<br />
Sufficient space is always of concern in any<br />
sized workshop. The Triton Woodrack is an excellent<br />
solution to this problem. Not only is it<br />
ideal for the woodworking workshop, but this<br />
easy to install product is ideal for plumbers to<br />
store PVC piping and guttering. It’s also highly<br />
suitable for metal products in an engineering<br />
workshop.<br />
TRI-WRA001 .........................RRP $59.00<br />
SALE $39.00<br />
NEW<br />
TRITON ® COMPACT PRECISION<br />
ROUTER JOF001 1010W 1- 1 ⁄3hp<br />
Weighing in at just 4.3kgs and combined with<br />
it’s compact design the JOF001 is the perfect<br />
machine for all your free-hand work. The soft<br />
start feature ensures that you maintain complete<br />
control as the machine powers up.<br />
TRI-JOF001 ........................RRP $199.00<br />
SALE $149.00<br />
TRITON ® 2000W/2.75hp DUAL<br />
MODE PRECISION ROUTER<br />
Key features include a powerful<br />
2000W/2.75hp soft-start electronically controlled<br />
motor, rack and pinion height adjustment<br />
allows you to switch from using it as a<br />
conventional plunge router to using it as a<br />
fixed-base router.<br />
TRI-TRA001B .....................RRP $349.00<br />
SALE $279.00<br />
Log and Pole Jaw optional accessory<br />
TRITON ® MULTI-STAND - WORK SUPPORT MSA200<br />
Multi-purpose, adjustable support stand with extra-wide tripod<br />
base for excellent stability on level or uneven ground. Folds<br />
down in seconds for convenient transportation and storage.<br />
TRI-MSA200 ......................................................RRP $59.00<br />
SALE $39.00<br />
TRITON ® SUPERJAWS PORTABLE CLAMPING SYSTEM<br />
The SJA200 SuperJaws is the workstation you take right to the job; indoors,<br />
outdoors, construction sites or the factory floor. It provides fast<br />
and easy hands-free clamping action of material up to 956mm (37")<br />
and features a massive force of up to 1000kg (1 tonne), for all clamping<br />
or pressing applications. TRI-SJA200 ....................RRP $199.00<br />
SALE $129.00<br />
TEKNATOOL ® 1624-44 LATHE<br />
A terrific lathe that will provide you a lifetime<br />
of service. Packed with features you'd expect<br />
from a more<br />
expensive lathe, this is<br />
the most versatile lathe on the market.<br />
TK-1624-44 ....................WAS $1,495.00<br />
NOW $1,295.00<br />
CARBA-TEC ® 8” LONG BED JOINTER<br />
Features an extra long 1950mm bed for<br />
superior stock support and a superior<br />
parallelogram system for easy and accurate<br />
table adjustments.<br />
CTJ-350 ..........................WAS $1,295.00<br />
NOW $1,195.00<br />
CARBA-TEC ®<br />
CAST IRON TOP ROUTER<br />
TABLE<br />
Features universal router<br />
mounting system. Fits most<br />
routers. Table tilts to 45° for easy under<br />
table access. Fitted with removable key<br />
switch, cast iron dust extraction housing<br />
and two steel spring hold downs.<br />
RT-017.........WAS $339.00<br />
NOW $299.00
CMT 45° LOCK MITRE JOINT BIT<br />
CMT lock mitre bits are ideal for milling mitre joints<br />
in 1-1/8" (28.5 mm) stock. The quick and easy way<br />
to accurately create boxes, stretcher bars, frames<br />
and any assortment of right angle or parallel joint<br />
projects.<br />
855-503-11 D:69.8 X:31.7 A:45°WAS$139.00<br />
NOW $109.00<br />
855-504-11 D:50.8 X:22.2 A:45° WAS $99.00<br />
NOW $89.00<br />
CMT 6 PIECE PROFILE BIT SET<br />
A multi-purpose set for any job. Set includes: 1<br />
chamfer bit, 1 ogee bit, 1 roundover bit, 1 rabbeting<br />
bit, 1 cove bit and 1 round nose bit. Includes wooden<br />
storage case, all bits have 1/2” shanks. Made in<br />
Italy. 800-504-11 .................WAS $229.00<br />
NOW $179.00<br />
CMT 3 PIECE KITCHEN SET<br />
Set includes one rail and stile matched set<br />
and one ogee style raised panel bit. Three<br />
bits, 1/2” shank only. Made in Italy.<br />
800-513-11 .......................WAS $249.00<br />
NOW $199.00<br />
100MM TEKNATOOL SUPERNOVA 2<br />
KEY OPERATED CHUCK.<br />
Ideal for those with lathes up to 508mm<br />
swing. Brilliant all-round chuck for the<br />
majority of users, from beginner to<br />
advanced. TK-SN2...............RRP $199.00<br />
SALE $179.00<br />
TEKNATOOL G3 KEY OPERATED<br />
CHUCK<br />
Ideal for those with mid-size lathes. A good<br />
all around chuck for the beginner or<br />
intermediate user. TK-G3 .....RRP $169.00<br />
SALE $159.00<br />
PREMIUM UNIVERSAL<br />
LIVE CENTRE. We think that<br />
this is the best universal live<br />
NEW<br />
centre available today. Supplied with three<br />
tips, a standard 60° cone for general work,<br />
a 9.5mm dia. by 16mm long point for small<br />
or close work and a cup or ring centre for<br />
open grain or split turning. Made in UK.<br />
AXM-340186 .......................WAS $99.00<br />
NOW $89.00<br />
DUST COLLECTION ACCESSORY KIT.<br />
This kit provides the necessary hose,<br />
clamps and fittings to easily connect<br />
most machines to a dust collector.<br />
DCK-3 ..............................RRP $99.00<br />
SALE $89.00<br />
170 PIECE DRILL BIT CASSETTE.<br />
Titanium nitride is a very hard coating that<br />
extends the length of time between<br />
sharpenings. Set contains 170 quality HSS<br />
titanium nitride coated drill bits.<br />
BDK-170T.............................WAS $89.00<br />
NOW $79.00<br />
GEAR CLAMPS<br />
(X2)<br />
A fast action along<br />
with an all steel<br />
ratchet clamping<br />
mechanism make<br />
these clamps an<br />
indispensable addition<br />
to any workshop. The<br />
powerful clamping<br />
force (300kg) means<br />
that almost anything can<br />
be clamped quickly and<br />
NEW<br />
securely making them<br />
handy when fitting up projects by<br />
yourself.<br />
CQG-12 (pair) ..........RRP $59.00<br />
SALE $49.00<br />
ARCHER TM BISCUIT JOINER<br />
The best value for money biscuit joiner on<br />
the market. Features include; tungsten<br />
tipped blade, head built with solid alloy<br />
construction, fence tilts from 0° to 90°.<br />
PT1301..............................RRP $135.00<br />
SALE $119.00<br />
SILVERGLIDE DRY SLIP - 250ML<br />
Useful in a myriad of applications. Mainly<br />
used to protect cast iron tops from rust. It<br />
can also provide lubrication for highly<br />
resinous timbers while machining them on<br />
table saws, jointers, etc.<br />
SILVERGLIDE-250............RRP $29.00 ea.<br />
Buy 4 for $69<br />
MAGNETIC ANGLE FINDER<br />
Use this digital tool to provide quick, precise<br />
angle readings with your tablesaw or any<br />
other woodworking machine! This miniature<br />
tool provides digital readings from zero to<br />
180° to within 0.1° accuracy. Secures to a<br />
base with integral magnets.<br />
AFB-15.................................RRP $59.00<br />
SALE $49.00
CARBA-TEC ® 12-1/2”<br />
THICKNESSER<br />
2hp, 240v motor, 318mm max. Cutting<br />
width. This entry level thicknesser is<br />
suitable for the home workshop or light<br />
trade use. CT-317...............RRP $429.00<br />
SALE $389.00<br />
CARBA-TEC ® 12” DISC SANDER<br />
WITH BRAKE<br />
Cast iron body construction with an alloy<br />
table, 1hp 4 pole 1440 rpm motor direct<br />
coupled to the disc.<br />
DSB-12B............................RRP $179.00<br />
SALE $159.00<br />
NEW<br />
2-1/2” HOLD TITE HOSE KIT<br />
Includes; 2-1/2” Hose, extends 260 x<br />
1000mm, 2 x couplers, <strong>Tape</strong>red & wide<br />
nozzle<br />
HTH-970 ..............................WAS $25.00<br />
NOW $15.00<br />
CABINETMAKER’S<br />
WORKBENCH WITH<br />
CABINET<br />
A traditionally designed,<br />
European made beechwood<br />
bench intended for use in the<br />
larger workshop. Heavy duty top<br />
measures 1900mm x 610mm<br />
and is 40mm thick. Working<br />
height: 850mm. CTW-5 ...$1,695.00<br />
SALE $1,495.00<br />
CARBA-TEC ® 6”<br />
HEAVY DUTY JOINTER<br />
The CTJ-196 features 1 hp motor, fully<br />
enclosed cabinet, dust chute, integral<br />
mobile base, centre-mounted heavy-duty<br />
rack and pinion fence, three-knife<br />
cutterhead and paddle style stop switch.<br />
Table length: 1180mm, rabbeting<br />
capacity: 15 x 152mm, fence tilt: 45° in<br />
and out with positive stops at 90° and<br />
+/-45°. A truly professional machine<br />
suitable for any DIY or trade workshop.<br />
CTJ-196 ........................WAS $649.00<br />
NOW $599.00<br />
CARBA-TEC ® 6” X 9”<br />
COMBINATION BELT/DISC<br />
SANDER<br />
Our top selling sanding unit. Heavy<br />
cast construction with two position,<br />
tilting work table. This latest model<br />
now features a NVR type safety<br />
switch, and includes a great metal<br />
stand. Belt can be used vertically or<br />
horizontally. Disc table tilts to 45°.<br />
Standard equipment includes graphite<br />
slip cloth underneath the belt. Also<br />
fitted with quick change hook and<br />
loop 9” disc. Stand, mitre<br />
gauge sanding belt and<br />
velcro disc included.<br />
SB-609 ........WAS $359.00<br />
NOW $339.00<br />
NEW<br />
CREUSEN POWERLINE 6” HIGH<br />
SPEED DOUBLE GRINDER<br />
230V 1~50-60Hz voltage, 350w power, approx.<br />
2800rpm speed.<br />
CG-DS7150TS ....................RRP $299.00<br />
SALE $279.00<br />
CARBA-TEC ® 10”<br />
CONTRACTOR’S SAW<br />
Cast iron construction makes this saw a<br />
solid performer that's perfect for the<br />
woodworking enthusiast. Made as a<br />
contractor's type machine, it's easy to<br />
move around your shop with one of our<br />
mobile bases (sold separately).<br />
CTJ-650 ........................RRP $849.00<br />
SALE $759.00
16 PIECE FORSTNER BIT SET<br />
Forstner bits feature continuous rounded<br />
edges for smooth cutting with minimal<br />
tearout. Metric sets include bits of following<br />
sizes: 6, 10, 12, 16, 20, 22, 25, 28, 32,<br />
35, 38, 41, 45, 48, 51 and 54mm.<br />
FSB-16PCE-M.......................WAS $59.00<br />
NOW $49.00<br />
STACKABLE UTILITY BOX<br />
Quality hinged lid utility box, outside dimensions<br />
420 x 330 x 60mm with 20 removable<br />
bins.<br />
CT-3086A ............................WAS $25.00<br />
NOW $12.00<br />
HINGES<br />
CARBA-TEC ® 19”<br />
CE BANDSAW<br />
This Bandsaw is packed with features. Extra<br />
heavy solid (not spoked) cast iron wheels,<br />
increased table size, higher rip fence, powerful<br />
induction motor, no-volt safety switch,<br />
door cut-out switch, blade tracking window,<br />
micro-adjustable table tilt with much more.<br />
Combined with industry leading specs this<br />
bandsaw is at the top of it’s class.<br />
SBW-4800CE..................WAS $1,849.00<br />
NOW $1,749.00<br />
90° SOLID BRASS BUTT HINGE.<br />
BMH-90-01 1 pair, 1”x1” .......RRP $17.70<br />
SALE $15.00<br />
SOLID BRASS BUTT HINGES.<br />
1 pair 1”x 3/4” with screws<br />
BMH-BH06..........................RRP $6.80<br />
SALE $5.50<br />
1 pair 3 ⁄4”x 5 ⁄8”with screws<br />
BMH-BH01 ..........................RRP $7.80<br />
SALE $6.90<br />
1 pair 1- 1 ⁄2”x 7 ⁄8” with screws<br />
BMH-BH09........................RRP $11.40<br />
SALE $9.00<br />
1 pair 2--1/2”x 5/8”with screws<br />
BMH-BH04........................RRP $13.20<br />
SALE $11.50<br />
CARBA-TEC ® 14”<br />
BANDSAW - TWO SPEED<br />
Suitable for high speed wood cutting as well<br />
as low speed light duty cutting of non-ferrous<br />
metals. This bandsaw has a solid cast<br />
iron table and adjustable aluminium rip<br />
fence. BAS-350B................WAS $749.00<br />
NOW $649.00<br />
Includes<br />
stand<br />
CARBA-TEC ® 400MM WIDE<br />
DRUM SANDER<br />
Ideal for finish sanding or it can be used as<br />
a finish planer for curly-grained timber.<br />
Sands 400mm wide with one pass and<br />
800mm with two passes. 125mm throat<br />
depth, 1hp motor, 2-1/2" diameter dust<br />
port and variable speed platen.<br />
WDS-400 Sander w/stand...WAS $858.00<br />
NOW $789.00<br />
CARBA-TEC ® DELUXE 15”<br />
THICKNESSER<br />
Features a powerful 3hp motor, a three<br />
knife cutterhead, serrated infeed roller,<br />
polyurethane outfeed roller, anti-kickback<br />
fingers, adjustable bed rollers and a frontmounted<br />
NVR magnetic safety switch. Fitted<br />
with cast iron tables on the infeed and outfeed<br />
ends instead of cheap rollers.<br />
CTJ-381 ..........................RRP $1,495.00<br />
SALE $1,349.00
LIDWIG CLAW (10<br />
PACK)<br />
The new cable hanger<br />
from Lidwig takes the<br />
clamp invention one<br />
step further. The Claw<br />
Hanger is the workshop<br />
hook you will find<br />
hundreds of uses for.<br />
Quick to release, quick<br />
to lock swivel hook for<br />
hanging adaption, saves lead damage.<br />
Some uses for the Lidwig Claw: Extension leads, Air & garden<br />
hoses, Welding Cable.LW-CLAW - .........................RRP ea. $5.50<br />
BUY 10 FOR $39.00 while stocks last<br />
CARBA-TEC® VARIABLE SPEED MINI LATHE<br />
Our own variable speed mini lathe with all the features!<br />
Includes; Easy-to-position tool rest, stable cast iron<br />
frame/headstock/tailstock for reduced chatter, three variable<br />
speed ranges: 250-800, 550-1700 and 1200-3600.<br />
Can also be fitted with optional 595mm extension bed.<br />
CT-70-1000..........................................................WAS $995.00<br />
NOW $799.00<br />
THE KREG JIG ® K4 MASTER SYSTEM<br />
This is the ultimate Pocket-Hole Jig on the<br />
market, and a great choice for any<br />
woodworking enthusiast.<br />
KR-K4MS .............WAS $229.00<br />
NOW $179.00<br />
CARBA-TEC ® 9 DRAWER STORAGE UNIT.<br />
533 x 265 x 310mm. CT-309H ......................WAS $189.00<br />
NOW $139.00<br />
Works with<br />
any vac<br />
CARBA-TEC ®<br />
DUST<br />
DEPUTY - by ONEIDA AIR<br />
SYSTEMS.<br />
The Dust Deputy is an extremely<br />
efficient, cyclonic pre-separator<br />
for vacuums. The Dust Deputy<br />
will filter 99% of sanding dust,<br />
with only 1% going into the vacuum.<br />
Maintain maximum suction,<br />
no loss in airflow, and an<br />
end to clogged filters! Made in<br />
USA.<br />
DDAUS..............RRP $189.00<br />
SALE $179.00<br />
CARBA-TEC ®<br />
2HP<br />
ECONOMY EXTRACTOR<br />
The ideal choice for the larger<br />
garage or shed workshop. The<br />
additional power in this machine<br />
allows you to connect two<br />
machines simultaneously.<br />
FM-300 ............WAS $329.00<br />
NOW $299.00<br />
CARBA-TEC ®<br />
1HP<br />
ECONOMY EXTRACTOR<br />
An excellent value for money<br />
machine. Suited for the hobbyist<br />
or weekend woodworker's<br />
workshop. Effective for removal<br />
of chips and shavings from one<br />
machine at a time.<br />
FM-230 ............WAS $195.00<br />
NOW $189.00<br />
Includes tools and<br />
5m hose<br />
INDUSTRIAL DUST<br />
EXTRACTOR<br />
This tool is configured for use<br />
on most power tools and<br />
includes 5m of hose. When a<br />
sander or similar is plugged into<br />
the extractor, the extractor<br />
automatically turns on. It may<br />
however, be used on other<br />
industrial tools. Made in Italy.<br />
INOX-36 .....WAS $469.00<br />
NOW $429.00
LEIGH D4R PRO DOVETAIL JIG<br />
Leigh D4R Pro Jig is the ultimate in joinery jig technology. Made from high<br />
tech materials and fully adjustable, this jig performs any task with ease.<br />
Step up to professional gear with this outstanding tool. Made in Canada.<br />
VRS support shown is an optional accessory.<br />
LGH-D4R 24” Dovetail Jig metric...........................................RRP $679.00<br />
SALE $599.00<br />
TO ORDER<br />
BRISBANE | MELBOURNE | ADELAIDE<br />
CALL: 1800 658 111<br />
NEW BRISBANE LOCATION<br />
BRISBANE<br />
CARBA-TEC Pty. Ltd. ACN 010 706 242<br />
128 Ingleston Road, Wakerley, Qld, 4154<br />
telephone 07 3390 5888 fax 07 3890 5280<br />
orders@carbatec.com.au<br />
MELBOURNE<br />
CARBA-TEC (MELB.) Pty. Ltd. ACN 010 055 491<br />
80 - 82 Osborne Avenue Springvale, Victoria 3171<br />
telephone 03 8549 9999 fax 03 8549 9998<br />
melbourne@carbatec.com.au<br />
ADELAIDE<br />
CARBA-TEC (ADELAIDE) ABN 77 545 137 876<br />
27 Magill Road, Stepney, 5069<br />
telephone 08 8362 9111 fax 08 8363 0271<br />
adelaide@carbatec.com.au<br />
Prices do not include shipping and handling charges.<br />
Focus Team<br />
Editor: Carol Russell<br />
Graphic Designer: Rachel O’Dell<br />
Photographer: Donovan Knowles<br />
www.carbatec.com.au<br />
METAL DETECTOR<br />
Overall length: 395mm.<br />
This high performance<br />
metal detector has a folding<br />
design for portability and<br />
ease of use. The sensor<br />
head has a diameter of<br />
135mm and will detect<br />
most metal objects that will<br />
be a danger to you or to<br />
your planer or thicknesser<br />
blades. The unit is powered<br />
by a 9v battery<br />
(included).<br />
MMD-80A .....WAS $69.00<br />
Now $59.00<br />
INDUSTRIAL STEEL<br />
SHELVING<br />
Ideal for garages, offices,<br />
shops, warehousing, commercial<br />
kitchens, workshops,<br />
etc. Made of steel<br />
for strength and silver<br />
coloured powder coating<br />
provides aesthetic appeal<br />
and rust resistance. Infinitely<br />
variable shelf location<br />
via interlocking keyhole system.<br />
GR-4XHD.....RRP $295.00<br />
SALE $239.00<br />
<strong>Of</strong>fer Ends 16th April 2011<br />
<br />
Available<br />
Online &<br />
Instore<br />
Gift Card