17.10.2014 Views

G 2600 VC G 2600 VC Plus

G 2600 VC G 2600 VC Plus

G 2600 VC G 2600 VC Plus

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

WATER SUPPLY<br />

(Cold Water Only)<br />

CAUTION<br />

When connecting the water inlet to the water<br />

supply mains, local regulations of your water<br />

company must be observed. In some areas<br />

the unit must not be connected directly to the<br />

public drinking water supply. This is to ensure<br />

that there is no feedback of chemicals into the<br />

water supply. Direct connection via a receiver<br />

tank or backflow preventer, for example, is<br />

permitted.<br />

Dirt in the feed water will damage the unit. To<br />

avoid this risk, we recommend fitting a water<br />

filter.<br />

■ Garden hose must be at least 5/8 inch in<br />

diameter.<br />

■<br />

■<br />

■<br />

■<br />

■<br />

■<br />

Flow rate of water supply must not fall<br />

below 2.5 GPM (gallons per minute).<br />

Flow rate can be determined by running the<br />

water for one minute into an empty 5-gallon<br />

container.<br />

The water supply temperature must not<br />

exceed 104°F/40°C.<br />

Never use the pressure washer to draw in<br />

water contaminated with solvents, e.g. paint<br />

thinners, gasoline, oil, etc.<br />

Always prevent debris from being drawn<br />

into the unit by using a clean water source.<br />

Use additional water filter.<br />

Do not operate pressure washer without the<br />

water turned on.<br />

ASSEMBLY INSTRUCTIONS<br />

Required Tools (not included)<br />

Hardware (included)<br />

English<br />

5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!