Olympus EVOLT E-300 Instruction Manual - Cleaning Digital Cameras
Olympus EVOLT E-300 Instruction Manual - Cleaning Digital Cameras
Olympus EVOLT E-300 Instruction Manual - Cleaning Digital Cameras
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Selecting the right mode for the shooting technique — P, A, S and M<br />
3<br />
Selecting the right mode for shooting conditions<br />
Aperture values and shutter speeds in the<br />
P (Program) mode<br />
In the P (Program) mode, the camera is programed so that the aperture value and<br />
shutter speed are selected automatically according to the subject brightness as<br />
shown below. The below diagram depends on the attached lens.<br />
ED 50mm f2 MACRO<br />
Example:When EV is 7,<br />
the aperture<br />
value is set to<br />
F2 and the<br />
shutter speed to<br />
1/30.<br />
5<br />
4<br />
3<br />
2<br />
1<br />
0<br />
-1<br />
-2<br />
6 7 8<br />
9 10 11 12 13 14 15 16 17 18 19 20 EV<br />
F22<br />
F1<br />
8s 4s 2s 1s 1/2 1/4 1/8 1/15 1/30 1/60 1/125 1/250 1/500 1/10001/2000 1/4000<br />
Shutter speed<br />
Program shift (Ps)<br />
By rotating the control dial in the P mode, you can change the combination of<br />
aperture and shutter speed while keeping the optimum exposure.<br />
The program shift setting will not be<br />
canceled after shooting. To cancel<br />
program shift setting, rotate the<br />
Aperture value<br />
control dial so that the viewfinder<br />
Viewfinder<br />
indication Ps changes to P or turn off<br />
Shutter speed<br />
the power. Program shift is not<br />
available when you are using a flash.<br />
F16<br />
F11<br />
F8<br />
F5.6<br />
F4<br />
F2.8<br />
F2<br />
F1.4<br />
: When using the fixed focal lens (ED 50mm f2 MACRO)<br />
: Maximum wide setting when using the zoom lens (14mm-54mm f2.8-f3.5)<br />
: Maximum tele setting when using the zoom lens (14mm-54mm f2.8-f3.5)<br />
Aperture value<br />
Exposure mode<br />
44