alta® f series part numbering system - Apogee Instruments, Inc.
alta® f series part numbering system - Apogee Instruments, Inc.
alta® f series part numbering system - Apogee Instruments, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ALTA ® F SERIES<br />
PART NUMBERING<br />
SYSTEM<br />
151 N. Sunrise Ave. Ste 902<br />
Roseville CA 95661 USA<br />
tel 916 218 7450<br />
fax 916 218 7451<br />
www.ccd.com
ALTA ® F SERIES<br />
High Performance<br />
Cooled CCD Camera System<br />
PART NUMBERING SYSTEM FOR ALTA ® F SERIES CAMERAS<br />
The Alta <strong>part</strong> <strong>numbering</strong> <strong>system</strong> is rather complex, due to the fact it supports a wide variety of CCDs in several different<br />
housings, each with default configurations and a variety of alterable options. This brief guide is intended to help clarify some of<br />
the choices that are available to <strong>Apogee</strong> customers, so that they may understand their implications and be confident that they<br />
have chosen the right camera to suit their needs from the start. <strong>Apogee</strong> sales staff is always happy to answer any questions<br />
that may arise during this process and assist in any way they can to ensure customer satisfaction.<br />
D02F-MG43D-U04710-MB1F<br />
HOUSING<br />
D02<br />
16-bit DIGITAZATION<br />
F = Up to 8 MHz<br />
HEAT TRANSFER<br />
F = Fan<br />
CCD GRADE<br />
(as defined by manufacturer)<br />
1 = Grade 1<br />
SHUTTER<br />
MG43 = 43mm Shutter<br />
CCD TYPE<br />
MB = Midband<br />
INNER CHAMBER<br />
WINDOW<br />
D = Double<br />
INTERFACE<br />
U = USB 2.0<br />
CCD<br />
04710 = e2v CCD47-10<br />
For OEM sales contact:<br />
Graham Taft<br />
Office: (916) 218-7450 x 213<br />
Mobile: (916) 860-9851<br />
gtaft@ccd.com<br />
For General & Scientific sales contact:<br />
Timothy Puckett<br />
(916) 960-9885<br />
tpuckett@ccd.com<br />
For International sales contact:<br />
John Glueck<br />
(916) 284-6831<br />
jglueck@ccd.com<br />
151 N. Sunrise Ave. Ste 902<br />
Roseville CA 95661 USA<br />
tel 916 218 7450<br />
fax 916 218 7451<br />
www.ccd.com<br />
©2012 <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Alta is a registered trademark of <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Specifications subject to change without notice.
ALTA<br />
ASCENT ® F SERIES<br />
High Performance<br />
®<br />
Camera Performance<br />
Cooled CCD Camera System<br />
HOUSING OPTIONS<br />
D01:<br />
EXAMPLE: D02F-MG43D-U04710-MB1F<br />
This housing is designed to accomodate smaller CCDs (18mm diagonal or less). It has a C-thread (1”) and the CCD is<br />
at C-mount back focal distance (17.5mm or 0.69” behind the front plate, including compensation for optical offset of the<br />
chamber windows). If you plan to use a C-mount lens or mount the camera on a microscope this housing is a good choice.<br />
In order to mount a Nikon F-mount lens, Canon EOS or Canon FD lens, an additional external flange is required. The<br />
standard shutter for this housing is 25mm.<br />
This housing is designed to accomodate medium sized CCDs (about 18mm - 40mm diagonal). It has a 2” 24-TPI thread. A<br />
2” slip-fit, also called “prime focus” or “barrel mount”, adapter threads directly into this housing. Nikon and Canon adapters<br />
will also thread directly into this housing. This housing is not designed to work with C-mounts, but the D03 housing (see<br />
below) is made to accomodate the same range of CCD sizes and is compatible with C-mounts. The standard shutter for<br />
this housing is 43mm. Also available in a wide angle version (D13), contact sales staff for more information.<br />
D02:<br />
D03:<br />
This housing is designed to accomodate the same medium sized range of CCDs as the D02 (about 18mm - 40mm<br />
diagonal). It uses the same heatsink as the D02, but the housing removes the internal electromechanical shutter in order<br />
to achieve the correct back focal distance to use with a C-mount.<br />
D05:<br />
D06:<br />
This housing is the low profile version of the D01. The back focal distance is reduced from 0.69” (C-mount) to approximately<br />
0.45” (11.4mm). In order to achieve the smaller back focal distance this housing does not accomodate an internal<br />
electromechanical shutter.<br />
This housing is the low profile version of the D02. The back focal distance is reduced from about 1” to approximately 0.55”<br />
(14mm). In order to achieve the smaller back focal distance this housing does not accomodate an internal electromechanical<br />
shutter.<br />
This housing is designed to accomodate larger sensors (40mm - 52mm diagonal). This housing has a 2.5”-20 TPI thread.<br />
The back focal distance is similiar to the D02 (about 1” or 25.4mm). An adapter flange is required for Nikon or Canon lens<br />
adapters. The standard shutter for this housing is 63mm.<br />
D07:<br />
D09:<br />
This housing is designed to accomodate a large range of CCDs based on customer demand and offers high cooling. This<br />
housing has a 2.5”-20 TPI thread. The back focal distance is about 1.3” (about 34.5mm). An adapter flange is required for<br />
Nikon and Canon lens adapters. The standard shutter for this housing is 63mm.<br />
This housing is designed to accomodate very large sensors, like the Kodak KAF-4300 (49mm x 49mm) and the KAF-39000<br />
(49mm x 37mm). The optical back focal distance is about 1.2” (31mm). The standard shutter for this housing is 90mm.<br />
D10:<br />
D11:<br />
This housing is the low profile version of the D07. The back focal distance is reduced from about 1” to approximately<br />
0.6” (15.24mm). In order to achieve the smaller back focal distance this housing does not accomodate an internal<br />
electromechanical shutter.<br />
D12:<br />
This housing is the low profile version of the D10. The back focal distance is reduced from about 1.3” to approximately<br />
0.7” with a 3.25” (82.55mm) square opening. In order to achieve the smaller back focal distance this housing does not<br />
accomodate an internal electromechanical shutter.<br />
©2012 <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Alta is a registered trademark of <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Specifications subject to change without notice.
HEAT DISSIPATION<br />
ALTA ® F SERIES<br />
High Performance<br />
Cooled CCD Camera System<br />
EXAMPLE: D02F-MG43D-U04710-MB1F<br />
The two options for heat dissipation are fans, represented by the letter “F”, or liquid circulation, represented by the letter “L”. The standard method is fan<br />
cooled. The fan speed is programmable using the software in either high, medium, low or off modes. Liquid circulation if not intended to provide extra<br />
cooling, so much as it is designed to provide a means to dissipate heat away from the camera, such as outside of a closed box or away from a telescope. The<br />
temperature of the water must be above the environmental dew point.<br />
SHUTTERS<br />
EXAMPLE: D02F-MG43D-U04710-MB1F<br />
For each designated housing there is a default shutter configuration, either it has a shutter or does not come equipped with one, as is the case with the<br />
low profile housings. The housings that do come with an electromechanical shutter installed give the customer the option to remove it, if it is not needed or<br />
wanted. The shutter can be installed later, so long as the housing is made to accomodate one.<br />
Shutters are the only electromechanical element of the camera and therefore one of the few things that can<br />
wear out over time and may need replacing. They have an open time and a close time and a recommended<br />
minimum dwell time (when fully open). The closer they are operated to the minimum recommended shutter<br />
time, the more non-linear the results and the more pronounced the shadowed of the shutter (veining) in<br />
the images.<br />
Cameras with full frame sensors must either have an electromechanical shutter or be used in complete<br />
darkness with another method of gating the exposure. Cameras with interline transfer sensors do not<br />
require an electromechnical shutter, but may benefit from one due to leakage in the storage diode masks<br />
during readout because the masks are not 100% opaque. If the exposure time is very short compared to<br />
the readout time, the leakage in the masks may be an issue.<br />
Shutter abbreviations:<br />
NOSH = no shutter<br />
MG43 = 43mm Shutter<br />
VS25 = 25mm Shutter<br />
WINDOWS<br />
INTERFACE<br />
MG63 = 63mm Shutter<br />
CS90 = 90mm Shutter<br />
EXAMPLE: D02F-MG43D-U04710-MB1F<br />
The standard window configuration on for all Alta <strong>system</strong>s is “D”, a double window on the inner chamber. The windows are fused silica<br />
with broadband anti-reflection coating on both sides. Also offered is a single wedge window for monochromatic imaging. Contact one of<br />
our sales staff for more information about custom window options.<br />
Window abbreviations:<br />
S = Single D = Double<br />
W = Wedge C = Custom<br />
EXAMPLE: D02F-MG43D-U04710-MB1F<br />
At this time, <strong>Apogee</strong> only offers USB2, represented by the letter “U”. If there are concerns about the maximum cable length of 5 meters, extra hubs and<br />
cables can be purchased. We also offer Icron Ranger extenders which support USB cameras at distances from 100 meters (Cat5 cable) to 10km (fiberoptic<br />
cables).<br />
©2012 <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Alta is a registered trademark of <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Specifications subject to change without notice.
CCDS<br />
ALTA ® F SERIES<br />
High Performance<br />
Cooled CCD Camera System<br />
EXAMPLE: D02F-MG43D-U04710-MB1F<br />
<strong>Apogee</strong> assigns each CCD a 5-digit code. For the majority of the CCD configurations this number is based on the manufacturer’s <strong>part</strong> number. In some<br />
cases, like the Kodak KAF-1001E and the KAF-0261E, <strong>Apogee</strong> uses an alpha code to differentiate between the two available amplifiers on the CCD, low noise<br />
or high dynamic range. Below is a complete list of the CCDs <strong>Apogee</strong> offers in the Alta line of cameras at this time. If you are interested in a CCD not listed<br />
below, please contact one of <strong>Apogee</strong>’s sales staff about the possibility of integrating it into one of our <strong>system</strong>s.<br />
CCD Code Manufacturer CCD Model<br />
00402 Kodak KAF - 0402ME<br />
01007 Hamamatsu S10140 - 1007<br />
01008 Hamamatsu S10140 - 1008<br />
01009 Hamamatsu S10140 - 1009<br />
01107 Hamamatsu S10140 - 1107<br />
01108 Hamamatsu S10140 - 1108<br />
01109 Hamamatsu S10140 - 1109<br />
01603 Kodak KAF - 1603ME<br />
02020 Kodak KAI - 02020<br />
03011 e2v CCD30 - 11<br />
03041 Fairchild CCD3041<br />
03200 Kodak KAF - 3200ME<br />
04022 Kodak KAI - 04022<br />
04240 e2v CCD42 - 40<br />
04301 Kodak KAF - 4301<br />
04320 Kodak KAF - 4320<br />
04710 e2v CCD47 - 10<br />
06303 Kodak KAF - 6303E<br />
07700 e2v CCD77 - 00<br />
08300 Kodak KAF - 8300<br />
09000 Kodak KAF - 9000<br />
16000 Kodak KAI - 16000<br />
16801 Kodak KAF - 16801E<br />
16803 Kodak KAF - 16803<br />
23042 e2v CCD230 - 42<br />
39000 Kodak KAF - 39000<br />
A1001 Kodak KAF - 1001E, Low noise output amplifier<br />
A0261 Kodak KAF - 0261E, Low noise output amplifier<br />
B1001 Kodak KAF - 1001E, High dynamic range output amplifier<br />
B0261 Kodak KAF - 0261E, High dynamic range output amplifier<br />
©2012 <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Alta is a registered trademark of <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Specifications subject to change without notice.
CCD TYPE<br />
ALTA ® F SERIES<br />
High Performance<br />
Cooled CCD Camera System<br />
EXAMPLE: D02F-MG43D-U04710-MB1F<br />
The abbreviations below are used to help differentiate between the various types of CCDs each model is available in. For example, <strong>Apogee</strong> carries the e2v<br />
CCD47-10 back-illuminated, which comes in midband, broadband, ultraviolet and deep depletion models. Other CCDs, such as the e2v CCD30-11, are sold<br />
with either back-illuminated variants, like the 47-10, or front-illuminated (open electrode). In some cases, the abbreviations are used to differentiate between<br />
monochrome and color versions of CCDs. The quantum efficiency of each CCD varies between types.<br />
CCD GRADE<br />
CCD type abbreviations:<br />
MN = Monochrome non-microlensed<br />
CM = Color microlensed<br />
MB = Midband<br />
BB = Broadband<br />
UV = Ultraviolet<br />
OE = Open electrode<br />
DD = Deep depletion<br />
EXAMPLE: D02F-MG43D-U04710-MB1F<br />
CCD grades are defined by the manufacturers of the CCDs in the specification sheets for the sensor models. The grades set limits on the number of cosmetic<br />
defects, cluster defects and point defects for each sensor. What each manufacturer defines as a “defect” varies between manufacturers and varies from CCD<br />
to CCD. In the past, many CCDs were available in multiple grades, such as grade 0 (no defects), grade 1 and grade 2. Now, most CCDs are available in a<br />
single grade, which may have a legacy number or “standard grade”. If the CCD does not have a manufacturer supplied name for the grade of the sensor,<br />
<strong>Apogee</strong> calls it standard, or “S”. In the event of an upgrade however, a “C” would appear in this section of the <strong>part</strong> number, indicating that the CCD was<br />
customer supplied, because the current CCD would be moved from the old housing to a new one. Customers are welcome to supply their own CCDs if they<br />
have one they would like to use.<br />
Common CCD grade abbreviations:<br />
S = Standard<br />
0 = Grade 0 (e2v only)<br />
C = Customer supplied<br />
X = Engineering grade<br />
1 = Grade 1<br />
2 = Grade 2<br />
ANALOG ELECTRONICS<br />
EXAMPLE: D02F-MG43D-U04710-MB1F<br />
With the recent release of the Alta F Series, “F” is the default for electronics. The new Alta F Series electronics offer faster readout speeds at 16-bit<br />
digitazation to 8MHz.<br />
COMMON NON-STANDARD CONFIGURATIONS<br />
F4000<br />
D03F-NOSHD-U04022-MMSF<br />
D02 base with D01 C-mount lid; no shutter.<br />
F2000<br />
D06F-NOSHD-U02020-MMSF<br />
D02 base with low profile 2” aperature lid; no shutter.<br />
F4000<br />
D06F-NOSHD-U04022-MMSF<br />
D02 base with low profile 2” aperature lid; no shutter.<br />
F1<br />
D05F-NOSHD-U00402-MM1F<br />
D01 base with low profile lid; no shutter.<br />
151 N. Sunrise Ave. Ste 902<br />
Roseville CA 95661 USA<br />
tel 916 218 7450<br />
fax 916 218 7451<br />
www.ccd.com<br />
©2012 <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Alta is a registered trademark of <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Specifications subject to change without notice.
STANDARD CONFIGURATIONS<br />
ALTA ® F SERIES<br />
High Performance<br />
Cooled CCD Camera System<br />
Alta Model Part Number Alta Model Part Number<br />
F39000 D10F-CS90S-U39000-MM1F F39000C D10F-CS90S-U39000-CM1F<br />
F16M D07F-MG63D-U16803-MMSF F16-1 D07F-MG63D-U16801-MN1F<br />
F16-2 D07F-MG63D-U16801-MN2F F9000 D07F-MG63D-U09000-MMSF<br />
F9000X D07F-MG63D-U09000-MMSX F8300 D02F-MG43D-U08300-MMSF<br />
F9 D02F-MG43D-U06303-MN2F F43 D10F-CS90S-U04301-MNSF<br />
F4320-1 D10F-CS90S-U04320-MN1F F4320-2 D10F-CS90S-U04320-MN2F<br />
F3041F D02F-MG43D-U03041-MNSF F32 D01F-VS25D-U03200-MM2F<br />
F2 D01F-VS25D-U01603-MM2F F6-1 Low Noise D02F-MG43D-UA1001-MN1F<br />
F6-1 High DR D02F-MG43D-UB1001-MN1F F6-2 Low Noise D02F-MG43D-UA1001-MN2F<br />
F6-2 High DR D02F-MG43D-UB1001-MN2F F1 D01F-VS25D-U00402-MM1F<br />
F260 Low Noise D01F-VS25D-UA0261-MN1F F260 High DR D01F-VS25D-UB0261-MN1F<br />
F30-OE D02F-MG43D-U03011-OE1F F230 D07F-MG63D-U23042-MB1F<br />
F3041-MB D07-MG63D-U03041-MB1F F3041-UV D07F-MG63D-U03041-UV1F<br />
F42 D02F-MG43D-U04240-MB1F F42-UV D02F-MG43D-U04240-UV1F<br />
F47-MB D02F-MG43D-U04710-MB1F F47-BB D02F-MG43D-U04710-BB1F<br />
F47-UV D02F-MG43D-U04710-UV1F F77 D02F-MG43D-U07700-MB1F<br />
F30-MB D02F-MG43D-U03011-MB1F F30-UV D02F-MG43D-U03011-UV1F<br />
F1109 D02F-MG43D-U01109-UV1F F1108 D02F-MG43D-U01108-UV1F<br />
F1107 D02F-MG43D-U01107-UV1F F1009 D02F-MG43D-U01009-UV1F<br />
F1008 D02F-MG43D-U01008-UV1F F1007 D02F-MG43D-U01007-UV1F<br />
F16000-1 D07F-MG63D-U16000-MM1F F16000-2 D07F-MG63D-U16000-MM2F<br />
F16000C-1 D07F-MG63D-U16000-CM1F F16000C-2 D07F-MG63D-U16000-CM2F<br />
F4000 D02F-MG43D-U04022-MMSF F4000C D02F-MG43D-U04022-CMSF<br />
F2000 D01F-VS25D-U02020-MMSF F2000C D01F-VS25D-U02020-CMSF<br />
STANDARD CONFIGURATIONS - HIGH COOLING<br />
Alta Model Part Number Alta Model Part Number<br />
F16M-HC D09F-MG63D-U16803-MMSF F16-1-HC D09F-MG63D-U16801-MM1F<br />
F16-2-HC D09F-MG63D-U16801-MM2F F9000-HC D09F-MG63D-U09000-MMSF<br />
F8300-HC D09F-MG63D-U08300-MMSF F9-HC D09F-MG63D-U06303-MN2F<br />
F6-1-HC Low Noise D09F-MG63D-UA1001-MM1F F6-1-HC High DR D09F-MG63D-UB1001-MM1F<br />
F6-2-HC Low Noise D09F-MG63D-UA1001-MM2F F6-2-HC High DR D09F-MG63D-UB1001-MM2F<br />
F30-OE-HC D09F-MG63D-U03011-OE1F F16000-1-HC D09F-MG63D-U16000-MM1F<br />
F16000-2-HC D09F-MG63D-U16000-MM2F F3041-HC D09F-MG63D-U03041-MB1F<br />
F3041-UV-HC D09F-MG63D-U03041-UV1F F230-HC D09F-MG63D-U23042-MB1F<br />
F42-HC D09F-MG63D-U04240-MB1F F42-UV-HC D09F-MG63D-U04240-UV1F<br />
F47-MB-HC D09F-MG63D-U04710-MB1F F47-BB-HC D09F-MG63D-U04710-BB1F<br />
F47-UV-HC D09F-MG63D-U04710-UV1F F77-HC D09F-MG63D-U07700-MB1F<br />
F30-MB-HC D09F-MG63D-U03011-MB1F F30-UV-HC D09F-MG63D-U03011-UV1F<br />
F1109-HC D09F-MG63D-U01109-UV1F F1108-HC D09F-MG63D-U01108-UV1F<br />
F1107-HC D09F-MG63D-U01107-UV1F F1009-HC D09F-MG63D-U01009-UV1F<br />
F1008-HC D09F-MG63D-U01008-UV1F F1007-HC D09F-MG63D-U01007-UV1F<br />
©2012 <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Alta is a registered trademark of <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Specifications subject to change without notice.
FULL PART NUMBER BREAKDOWN<br />
D02F-MG43D-U04710-MB1F<br />
ALTA ® F SERIES<br />
High Performance<br />
Cooled CCD Camera System<br />
D01<br />
D03<br />
D06<br />
D09<br />
D11<br />
HOUSINGS:<br />
D13<br />
D02<br />
D05<br />
D07<br />
D10<br />
D12<br />
HEAT TRANSFER<br />
F = Fan<br />
L = Liquid Circulation<br />
16-bit DIGITAZATION<br />
F = Up to 8 MHz<br />
CCD GRADE<br />
(as defined by manufacturer)<br />
S = Standard<br />
0 = Grade 0 (e2v only)<br />
1 = Grade 1<br />
2 = Grade 2<br />
X = Engineering Grade<br />
SHUTTER<br />
VS25 = 25mm Shutter<br />
MG43 = 43mm Shutter<br />
MG63 = 63mm Shutter<br />
CS90 = 90mm Shutter<br />
NOSH = No Shutter<br />
INNER CHAMBER<br />
WINDOW<br />
S = Single<br />
D = Double<br />
W = Wedge<br />
C = Custom<br />
INTERFACE<br />
U = USB 2.0<br />
CCD<br />
00402 = Kodak KAF-0402ME (F1)<br />
01007 = Hamamatsu S10140-1007(F1007)<br />
01008 = Hamamatsu S10140-1008 (F1008)<br />
01009 = Hamamatsu S10140-1009 (F1009)<br />
01107 = Hamamatsu S10140-1107 (F1107)<br />
01108 = Hamamatsu S10140-1108 (F1108)<br />
01109 = Hamamatsu S10140-1109 (F1109)<br />
01603 = Kodak KAF-1603 (F2)<br />
02020 = Kodak KAI-2020 (F2000)<br />
03011 = e2v CC30-11 (F30)<br />
03041 = Fairchild 3041 (F3041)<br />
03200 = Kodak KAF-3200ME (F3200)<br />
04022 = Kodak KAI-4022 (F4000)<br />
04240 = e2v CCD42-40 (F42)<br />
04301 = Kodak KAF-4301 (F43)<br />
CCD TYPE<br />
MM = Monochrome, Microlensed<br />
CM = Color, Microlensed<br />
MN = Monochrome, Non-<br />
Microlensed<br />
MB = Midband<br />
BB = Broadband<br />
UV = UV Enhanced<br />
OE = Open Electrode (e2v only)<br />
DD = Deep Depletion<br />
04320 = Kodak KAF-4320 (F4320)<br />
04710 = e2v CCD47-10 (F47)<br />
06303 = Kodak KAF-6303E (F9)<br />
07700 = e2v CCD77-00 (F77)<br />
08300 = Kodak KAF-8300 (F8300)<br />
09000 = Kodak KAF-9000 (F9000)<br />
16000 = Kodak KAI-16000 (F16000)<br />
16801 = Kodak KAF-16801E (F16)<br />
16803 = Kodak KAF-16803 (F16M)<br />
23042 = e2v CCD230-42 (F230)<br />
39000 = Kodak KAF-39000 (F39000)<br />
A1001 = Kodak KAF-1001E, Low Noise (F6)<br />
A0261 = Kodak KAF-0261E, Low Noise (F260)<br />
B1001 = Kodak KAF-1001E, High DR (F6HDR)<br />
B0261 = Kodak KAF-0261E, High DR (F260HDR)<br />
151 N. Sunrise Ave. Ste 902<br />
Roseville CA 95661 USA<br />
tel 916 218 7450<br />
fax 916 218 7451<br />
www.ccd.com<br />
©2012 <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Alta is a registered trademark of <strong>Apogee</strong> Imaging Systems <strong>Inc</strong>. Specifications subject to change without notice.
Change language