UNIGRAPH INTERNATIONAL INC. CANUTEC: (613) 996 ... - Spicers
UNIGRAPH INTERNATIONAL INC. CANUTEC: (613) 996 ... - Spicers
UNIGRAPH INTERNATIONAL INC. CANUTEC: (613) 996 ... - Spicers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MATERIAL SAFETY DATA SHEET<br />
MANUFACTURER:<br />
PRODUCT: UNI LITHOFOUNT 96 G R/O<br />
<strong>UNIGRAPH</strong> <strong>INTERNATIONAL</strong> <strong>INC</strong>. <strong>CANUTEC</strong>: (<strong>613</strong>) <strong>996</strong>-6666<br />
51 Beauvais Street EMERGENCY NUMBER: (450) 632-5871<br />
Delson Quebec Canada DATE REVISED: January 1, 2012<br />
J5B 1W5<br />
SECTION I - IDENTIFICATION AND USE OF PRODUCT<br />
PRODUCT NAME: UNI LITHOFOUNT 96 G R/O<br />
PRODUCT CODE: 228<br />
CHEMICAL FAMILY: Blend.<br />
PRODUCT USE: Fountain solution.<br />
WHMIS CLASSIFICATION: D2B<br />
TDG CLASSIFICATION:<br />
- SHIPPING CLASS: Not regulated.<br />
- IDENTIFICATION: Not regulated.<br />
INGREDIENTS CAS #<br />
SECTION II - HAZARDOUS INGREDIENTS<br />
T.L.V.<br />
P.P.M. (VOL.)% LD 50 /LC 50<br />
2-Propoxyethanol 2807-30-9 N/AV 3-7 LD 50 (oral,rat)=3089mg/kg<br />
2-Butoxyethanol 111-76-2 50 3-7 LD 50 (oral,rat)=1480mg/kg<br />
SECTION III - PHYSICAL CHARACTERISTICS<br />
1. PHYSICAL STATE: Liquid.<br />
2. ODOUR: Mild.<br />
3. ODOUR THRESHOLD: N/AV.<br />
4. VAPOUR PRESSURE AT 21 o C (mmHg): 17<br />
5. VAPOUR DENSITY (AIR = 1): 3.8<br />
6. EVAPORATION RATE (Bu Ac =1): N/AV<br />
7. BOILING POINT (INITIAL): 102 o C<br />
8. FREEZING POINT: -8 o C<br />
9. SPECIFIC GRAVITY: 1,045<br />
10. SOLUBILITY IN WATER: 100%<br />
11. pH: 3.2 to 3.6<br />
SECTION IV - REACTIVITY<br />
1. STABILITY: This product is stable under all normal conditions of use.<br />
2. <strong>INC</strong>OMPATIBILITY: Avoid contact with strong oxidizing materials.<br />
3. HAZARDOUS DECOMPOSITION PRODUCTS: N/AV<br />
4. CONDITIONS OF REACTIVITY: Not considered to be reactive.
UNI LITHOFOUNT 96 G R/O page 2<br />
SECTION V - FIRE OR EXPLOSION HAZARDS<br />
1. CONDITIONS OF FLAMMABILITY: This product is non flammable.<br />
2. UPPER FLAMMABLE LIMIT %: Does not apply.<br />
3. LOWER FLAMMABLE LIMIT %: Does not apply.<br />
4. AUTO-IGNITION TEMPERATURE: Does not apply.<br />
5. FLASH POINT: None.<br />
6. HAZARDOUS COMBUSTION PRODUCTS: Oxides of carbon.<br />
7. EXPLOSION DATA (sensitivity to mechanical impact): Stable.<br />
8. EXPLOSION DATA (sensitivity to static discharge): Stable.<br />
9. EXTINGUISHING MEDIA: Use a dry chemical, foam or carbon dioxide extinguisher.<br />
SECTION VI - TOXICOLOGICAL PROPERTIES<br />
l. EXPOSURE LIMIT: Refer to Section II.<br />
2. TOXICOLOGICAL DATA: Refer to Section II.<br />
3. CARCINOGENICITY: No ingredients are considered to be carcinogenic.<br />
4. REPRODUCTIVE EFFECTS: This product has not been shown to be a reproductive<br />
hazard.<br />
5. MUTAGENICITY: This product has not been shown to cause damage to chromosomes.<br />
6. TERATOGENICITY: This product has not been shown to produce birth defects.<br />
7. SYNERGISTIC PRODUCTS: There is no data available.<br />
SECTION VII - HEALTH HAZARD INFORMATION<br />
1. INHALATION: Vapors may cause irritation to nose and throat.<br />
2. SKIN CONTACT: Prolonged skin contact may cause slight irritation and itching.<br />
3. EYE CONTACT: If splashed into eyes, it will cause strong irritation and burning.<br />
4. INGESTION: Induce vomiting.<br />
SECTION VIII - FIRST AID<br />
1. INHALATION: Move victim to fresh air. Apply artificial respiration if breathing<br />
has stopped.<br />
2. SKIN CONTACT: Wash skin with mild soap and water.<br />
3. EYE CONTACT: Hold eye lids open and rinse with water for 10 minutes. Contact a<br />
physician if irritation persists.<br />
4. INGESTION: Keep victim calm, administer oxygen if breathing is difficult.<br />
Induce vomiting. Obtain medical attention immediately.<br />
SECTION IX - PREVENTIVE MEASURES<br />
1. VENTILATION: Insure adequate ventilation so that vapour concentration is<br />
maintained below the threshold limit value.<br />
2. SKIN PROTECTION: Wear rubber gloves.<br />
3. EYE PROTECTION: Wear safety glasses.<br />
4. HANDLING PROCEDURES AND EQUIPMENT: Avoid "splash-filling".
UNI LITHOFOUNT 96 G R/O page 3<br />
5. STORAGE CONDITIONS: Store in cool, well ventilated area. Do not expose sealed<br />
containers to high temperatures. Keep away from heat, sparks and flame. Keep<br />
containers closed.<br />
6. PROCEDURES IN THE EVENT OF A SPILL OR LEAK: Absorb small spills with shovel and<br />
throw away in a container for non dangerous materials. Wash up residue with soapy<br />
water.<br />
7. WASTE DISPOSAL METHODS: Dispose of the absorbed material in a government approved<br />
site by controlled burning in an approved incinerator or landfill in accordance<br />
with federal, provincial and local regulations.<br />
SECTION X - ADDITIONAL INFORMATION<br />
ABBREVIATIONS:<br />
N/AP: not applicable<br />
N/AV: not available<br />
PPM: parts per million<br />
PREPARED BY: <strong>UNIGRAPH</strong> <strong>INTERNATIONAL</strong> <strong>INC</strong>.<br />
TELEPHONE NO.: (450) 632-5871<br />
DATE: January 1, 2012<br />
The information contained herein is offered only as a guide to the handling of this specific material and has been prepared in good faith by<br />
technically knowledgeable personnel. It is not intended to be all-inclusive and the manner and conditions of use and handling may involve<br />
other and additional considerations. No warranty of any kind is given or implied and <strong>UNIGRAPH</strong> <strong>INTERNATIONAL</strong> <strong>INC</strong>. will not be<br />
liable for damages, losses, injuries or consequential damages which may result from the use or reliance on any information contained herein.
UNI LITHOFOUNT 96 G R/O page 4