Dorma Sept 2010.pdf - Access Hardware Supply

DORMA Price List #21
Locks – Tubular Locksets
CL600/CK600 Series
Configuration Options
Configuration Options
Latch Bolts
1/2" Throw, 2-3/8"–2-3/4" Adjustable Backset
List
Part # Description Add
For 610 or 640 Locks
16120 1" x 2-1/4" front, 7/8" diameter, square corner N/C
16121 1" x 2-1/4" front, 7/8" diameter, 1/4" radius corner "
16123 1" diameter, drive in (626 finish only) "
For 651 Locks
16170 1" x 2-1/4" front, 7/8" diameter, square corner N/C
16171 1" x 2-1/4" front, 7/8" diameter, 1/4" radius corner "
16173 1" diameter, drive in (626 finish only) "
For 670 or 680 Locks
16190 1" x 2-1/4" front, 7/8" diameter, square corner N/C
16191 1" x 2-1/4" front, 7/8" diameter, 1/4" radius corner "
16193 1" diameter, drive in (626 finish only) "
NOTE:
• Default configurations shown above in bold.
Strikes
List
Part # Description Add
5001 – ANSI Strike with Cylindrical Lock Cutout
5001-118 1-1/4" x 4-7/8", 1-1/8" lip length, square corner N/C
5001-112 1-1/4" x 4-7/8", 1-1/2" lip length, square corner $18
List
Part # Description Add
5101, 5102 – “T” Strike with Dust Box
5101-118 1-1/8" x 2-3/4", 1-1/8" lip length, square corner N/C
5101-112 1-1/8" x 2-3/4", 1-1/2" lip length, square corner $18
5102-118 1-1/8" x 2-3/4", 1-1/8" lip length, 1/4" radius corner N/C
5102-112 1-1/8" x 2-3/4", 1-1/2" lip length, 1/4" radius corner 18
List
Part # Description Add
5201, 5202 – Full Lip Strike
5201-118 1-5/8" x 2-1/4", 1-1/8" lip length, square corner N/C
5202-118 1-5/8" x 2-1/4", 1-1/8" lip length, 1/4" radius corner "
NOTE:
• Default configuration shown above in bold.
140