Dorma Sept 2010.pdf - Access Hardware Supply

Keyway
A. SC Conventional Cylinders BA 7-pin small format IC
Other (specify)
D100 7-pin DORMA SKC – Complete B below
B. For DORMA SKC only
Existing project – Please furnish project/site number
New SKC project
This project will be maintained by DORMA CKC New Commercial Key Cutter
Name of existing DORMA Commercial Key Cutter who will maintain this project
Surface Closers
Fire/Life Safety
Concealed
Closers/Pivots
CKC Phone/email
New Commercial Key Cutter Agreement attached
Other Door
Controls
End User has in-house lockshop and wants to be a DORMA Institutional Key Cutter
New Institutional Key Cutter Agreement attached
Name of End User Locksmith
End User Lockshop Phone
Special Keying Required
Cross keying – Please furnish complete specifications using BHMA keying symbols.
Construction master keying – Causes a loss of 75% of combinations.
Temporary cores or cylinders are highly recommended for larger systems.
Selective master keys (JAN, HKP, etc.)
Each selective causes a loss of 25% of combinations.
Low Energy
Operators
Sliding Door
Hardware
Locks
Temporary cores or cylinders
SKD combinations under system control
Emergency keyed locksets
Independent key systems on the same project or site
SKD combinations under a separate control
SKD combinations each with a unique control
Cylinders, Keys,
and Keying
Cylinder and Key Marking
Cylinders
Ink in concealed place (default)
DORMA Key System Specification Form – SAL026 rev 5-18-10 Page 4 of 5
161
Keys
Key symbol (default)
Stamp (engrave) see price list for charges, DND US Property
characters, warranty, etc.
Serial number only on SKC keys
Special – Please attach specifics
Exit Devices
Electronic
Access Control