Slewing rings Schaeffler Technologies AG & Co. KG - Industrial ...

Miscibility
The preconditions for miscibility are as follows:
■ same base oil
■ compatible thickener types
■ similar base oil viscosities
– the difference must not be more than one ISO VG class
■ same consistency – NLGI grade.
If greases are to be mixed with each other, contact the
grease manufacturer.
Storage (Figure 5)
Lubricants age due to environmental influences.
The information provided by the lubricant manufacturer
should be adhered to.
INA uses greases with a mineral oil base. Experience shows
that these greases can be stored for up to 3 years.
The preconditions for storage are:
■ closed room or store
■ temperatures between 0 °C and +40 °C
■ relative atmospheric humidity not more than 65%
■ no contact with chemical agents (vapours, gases or fluids)
■ rolling bearings sealed.
The start-up frictional torque of greased bearings may
temporarily be higher than normal after extended periods of
storage. The lubricity of the grease may also have deteriorated.
Greases – even those obtained from the same
manufacturer – may vary in their characteristics.
Therefore, INA does not accept any liability for lubricants
and their behaviour during operation.
155 186
2004
2005
Figure 5 · Storage
2006
max. 65%
˚C
40
0
90
80
100 0
%
10
20
30
70
40
60 50
29
INDUSTRIAL TECHNOLOGIES +38 044 4982194 www.ind-techno.com.ua