Anthos FINAL - APEX Laboratory Equipment Company

More documents

Recommendations

Info

The Thermostar is a small benchtop incubator/shaker which offers excellent performance coupled with outstanding value for money. It is extremely simple to operate, provides very accurate temperature control and has a large capacity of 4 microplates or 56 test tubes*. * Optional test tube holder required INCUBATOR/SHAKER 10 Thermostar Incubator/Shaker Key Features • Wide temperature range from ambient to 100°C • Digital readout of all parameters - RPM, temperature, time, acceleration in running or stand-by mode • Parameter values can be changed while in operation • Last parameter values reside in memory after switch-off • Precision adjusted and maintained temperature regulation (within 0.5°C absolute deviation from set temperature) • Incorporated STEP and HOLD time functions with one minute resolution • Incorporated MOMENTARY RUN function with one second resolution • Three different levels of start-up speed • Simple user interface • Easily interchangeable plastic platforms for test tubes and stainless steel platforms for microplates • Large capacity (56 test tubes or 4 microplates) • Lid sensor to prevent possible overheating spikes TECHNICAL DETAILS RPM regulation: Shaker orbit: Temperature range: Temperature uniformity: Warm up time: Timer: Maximum capacity: Dimensions: Weight: Power: Digital, load independent, from 200 to 1300 RPM in steps of 10 RPM 3 mm Ambient to 100°C, max. 45°C for microplates Absolute deviation +/- 1 digit 9°C/minute typically 1 - 999 minutes in 1 minute steps 56 test tubes or 4 microplates 26.5cm x 24.5cm x 22.5cm (WxLxH) 11Kg 230 V/50 Hz, 115 V/60 Hz, 500 W
PRODUCT SELECTION Product Selection 11 Microplate PC Control Onboard Wavelength Plate Wavelength Absorbance mode Reading Readers via ADAP Software Software Range Formats Selection Endpoint Kinetic Spectral Speed Shaking Comments Analysis Analysis Scanning 2010 ✔ x 400-750nm 96 Filterwheel, 4 standard filters ✔ ✔ x 96 well - 30 seconds x Affordable, robust (405, 450, 492, 620) for routine May hold up to 8 filters absorbance assays 2020 ✔ ✔ 400-750nm 96 Filterwheel, 4 standard filters ✔ ✔ x 96 well - 30 seconds x Affordable, robust (405, 450, 492, 620) for routine May hold up to 8 filters absorbance assays Zenyth 340r ✔ x 340-750nm 6 - 48 and 96/384 Filterwheel, 3 standard filters ✔ ✔ x 96 well - 10 seconds ✔ High performance (405, 450, 620) 384 well - 18 seconds Temperature control May hold up to 8 filters option available Zenyth 340s ✔ ✔ 340-750nm 6 - 48 and 96/384 Filterwheel, 3 standard filters ✔ ✔ x 96 well - 10 seconds ✔ High performance (405, 450, 620) 384 well - 18 seconds Temperature control May hold up to 8 filters option available Zenyth 200r ✔ x 190-1000nm 6 - 48 and 96/384 ✔ ✔ ✔ 96 well - 11 seconds ✔ Microplate and Cuvette and Monochromator 384 well - 19 seconds Spectrophotometer standard cuvettes Temperature control (10mm pathlength) option available Zenyth 200s ✔ ✔ 190-1000nm 6 - 384 and ✔ ✔ ✔ 96 well - 11 seconds ✔ Microplate and Cuvette standard cuvettes Monochromator 384 well - 19 seconds Spectrophotometer (10mm pathlength) Temperature control option available LUMINOMETERS Lucy 2 ✔ x 300-650 nm 96 Filterwheel, 4 absorbance filters ✔ x x < 1 minute ✔ High performance, 1 High Pass Filter (570) per plate with single or dual May hold up to 15 filters (No dispensing) dispensing option Lucy 3 ✔ ✔ 300-650 nm 96 Filterwheel, 4 absorbance filters ✔ x x < 1 minute ✔ High performance, 1 High Pass Filter (570) per plate with single or dual May hold up to 15 filters (No dispensing) dispensing option Every Microplate Reader and Luminometer comes complete with ADAP Basic software Microplate Washer Volume Range Available Configurations Dispensing Accuracy Residual Volume Parameters Rinse Modes Method Storage Manifold Options Fluido 96 50 - 2000 μl 96 well with 2 or 4 Liquid lines < 5% at 300 μl < 1 μl per well Adjustable parameters Manual, automatic Up to 20 8 and 12 way in 50 μl increments to be used for wash buffers (8 and 16 way manifolds) for dispensing, soaking, and periodic different cycles manifolds with and rinse liquid, as required aspirating and shaking 50 procedures autoclaveable options and 20 plates Fluido 384 50 - 2000 μl 96 and 384 well with 2 or 4 Liquid lines < 5% at 300 μl < 1 μl per well Adjustable parameters Manual, automatic Up to 20 8 and 16 way in 25 μl increments to be used for wash buffers (8 and 16 way manifolds) for dispensing, soaking, and periodic different cycles manifolds with and rinse liquid, as required < 5% at 100 μl aspirating and shaking 50 procedures autoclaveable options (16 way manifold) and 20 plates
Page 1 and 2: microplate readers • washers •
Page 3 and 4: ADAP Software represents a unique a
Page 5 and 6: The Anthos Zenyth 340 is a universa
Page 7 and 8: TECHNICAL DETAILS Anthos Fluido 96W
Page 9: Twin Dispenser TECHNICAL DETAILS AD

Anthos FINAL - APEX Laboratory Equipment Company

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?