Anthos FINAL - APEX Laboratory Equipment Company
Anthos FINAL - APEX Laboratory Equipment Company
Anthos FINAL - APEX Laboratory Equipment Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
microplate readers • washers • luminometers
MICROPLATE READERS<br />
The <strong>Anthos</strong> 2010 and 2020 are high performance microplate readers<br />
with powerful customised software for routine absorbance assays in<br />
research, quality control and diagnostics.<br />
2010 and 2020<br />
Microplate Readers<br />
2<br />
Key Features<br />
• Single or dual wavelength measurements<br />
plus kinetic measurements<br />
• Proven optical system (0.001 Abs resolution)<br />
• Plate centring system positions any 96-well<br />
microplate accurately in the optical path<br />
• Flexible wavelength selection, filter wheel<br />
can hold up to 8 filters<br />
• ADAP Basic Software for user<br />
administration, kinetic data reduction,<br />
flexible data management and data storage<br />
• Choice of various software packages<br />
(refer to ADAP Software section for details)<br />
ADDITIONAL FEATURES FOR THE 2020<br />
• Sophisticated onboard software<br />
• Flexible plate layout with blanks, standards<br />
and controls<br />
• Comprehensive quantitative and qualitative<br />
data-evaluation<br />
• Functions with curve-fits, cut-offs and<br />
transformation formulae<br />
• Multiple kinetic data reduction modes,<br />
combined with further quantitative and<br />
qualitative evaluation capabilities<br />
• Variables, test-validation and automatic<br />
replicate elimination<br />
• Language selection (English and German)<br />
• Colour display with graphics<br />
• Easy data export to PC<br />
TECHNICAL DETAILS<br />
<strong>Anthos</strong> Reader 2010 2020<br />
Photometric Method: Transmission Photometer ✔ ✔<br />
Light Source: Tungsten Halogen Lamp ✔ ✔<br />
Photodetector: Silicon Photodiode ✔ ✔<br />
Wavelength Range: 400 - 750nm ✔ ✔<br />
Resolution: 0.001 Abs ✔ ✔<br />
Absorbance Range: 0.000 - 3.300 Abs ✔ ✔<br />
Accuracy: 2% Abs at 1 Abs, 492nm ✔ ✔<br />
Linearity:
ADAP Software represents a unique and modern interface for the PC<br />
control of all <strong>Anthos</strong> reader models. Flexible function-levels of ADAP<br />
allow test programming and data evaluation protocols from routine<br />
to more complex scientific research demands.<br />
ADAP Software<br />
ADAP Basic<br />
Dependent on available measurement modes<br />
ADAP Basic provides the following features:<br />
User Administration:<br />
• ADAP Basic provides access control by<br />
user name and password for 3 different<br />
authorization levels. This gives the user the<br />
opportunity to work within FDA 21 CFR,<br />
part 11 compliance.<br />
Quick and easy Assay Setup:<br />
• The basic module is an efficient tool for<br />
obtaining raw data for all measurement<br />
modes including endpoint, kinetic, spectral<br />
scan and position scan.<br />
Data Storage and Data Export:<br />
• All data can be stored to a database or as<br />
a text file. “Easy copy and paste” transfer<br />
of data to Excel.<br />
Kinetic Data Reduction:<br />
• The user can choose between various<br />
kinetic data reduction modes for assays.<br />
ADAP Plus<br />
This software extension of ADAP Basic is the<br />
recommended package for routine<br />
absorbance and luminescence applications<br />
such as ELISA and LIA and includes:<br />
Quantitation of Samples:<br />
• Samples of unknown concentrations can<br />
be quantified by use of a standard curve.<br />
Curve Fits:<br />
• Linear regression, point to point, cubic<br />
spline and 4 parameter fit; linear and<br />
logarithmic axis scaling as well as<br />
extrapolation options.<br />
ADAP SOFTWARE<br />
AVAILABLE CONFIGURATIONS:<br />
Reader 2010 Standard<br />
PC controlled version with<br />
ADAP Basic Software<br />
Reader 2010 Standard Plus<br />
PC controlled version<br />
with ADAP Plus Software<br />
Reader 2020 without Floppy Drive<br />
Stand alone version with ADAP Basic<br />
and onboard data evaluation software<br />
Reader 2020 with Floppy Drive<br />
Stand alone version with Floppy Drive,<br />
ADAP Basic and onboard data<br />
evaluation software<br />
ORDERING INFORMATION:<br />
2010 Standard GF 17 550 11<br />
2010 Standard Plus GF 17 550 12<br />
2020 without floppy drive GF 22 550 11<br />
2020 with floppy drive GF 22 550 18<br />
Qualitative Analysis:<br />
• Up to 4 different cut off values can be used<br />
to define 5 different groups of samples.<br />
Replicate Elimination:<br />
• Eliminates outliers and helps to avoid<br />
pipetting errors.<br />
Assay Validation:<br />
• Assay conditions can be established to<br />
verify test chemistry.<br />
ADAP Expert<br />
This software is an extension of ADAP Plus and<br />
offers kinetic evaluation and position scanning<br />
properties combined with visualisation of data.<br />
Intra-Plate Multi Assay:<br />
• 6 different assays can be combined on<br />
one plate.<br />
Area and Linear Scan:<br />
• Linear scan is used to verify agglutination.<br />
• Area scan can be used to perform<br />
precipitation/insolubility studies.<br />
Kinetic Evaluation:<br />
• Reduced data from kinetic assays can be<br />
taken for further calculation and verification<br />
of test chemistry.<br />
ADAP Prisma<br />
ADAP Prisma is specifically designed for<br />
operation with the <strong>Anthos</strong> Zenyth 200<br />
Spectrophotometer which uses a<br />
monochromator for wavelength selection.<br />
ADAP Prisma includes two modules -<br />
The Quantitation and Characterisation module<br />
and the ELISA module.<br />
Quantitation and Characterization Module:<br />
• Easy to use test editor for assay<br />
development<br />
• Quantitation of samples of unknown<br />
concentration<br />
• Spectral scanning with post-run<br />
manipulations of spectra (overlay of<br />
different spectra)<br />
• Calculation with factors and constants<br />
• Position scan and well scan editor<br />
• Multi-wavelength equation<br />
Stored routines for most common<br />
Cuvette Assays:<br />
• Nucleic acid concentration<br />
• Oligo concentration, melting point and<br />
conversion to pmol/μl<br />
• Direct protein quantitation at 280nm<br />
• Determination of purity of DNA preparations<br />
• Monitoring bacterial growth with preset or<br />
user defined conversion factors<br />
ELISA module:<br />
• Quantitation of samples<br />
• Qualitative analysis<br />
• Replicate elimination<br />
• Assay validation<br />
• Kinetic evaluation<br />
ADAP Basic is supplied free of charge with all<br />
readers and provides all the necessary<br />
functions for control and data acquisition.<br />
One upgrade level for Zenyth 200 (ADAP<br />
Prisma) and 2 upgrade levels for all other<br />
reader models (ADAP Plus and ADAP Expert)<br />
including data evaluation functions are<br />
available as options.<br />
3
MICROPLATE READERS<br />
The <strong>Anthos</strong> Zenyth 200 is a high performance microplate and cuvette<br />
spectrophotometer providing an indispensable research tool for Life<br />
Science and Pharmaceutical research laboratories.<br />
Zenyth 200<br />
Microplate<br />
Reader<br />
4<br />
AVAILABLE CONFIGURATIONS:<br />
Key Features<br />
• Wavelength range: 190 -1000nm<br />
• Excellent optical specifications<br />
(0.0001 Abs resolution)<br />
• Measurement modes: endpoint, kinetic,<br />
multichromatic, spectral scanning and<br />
position scanning<br />
• Multiple plate formats: cell culture plates<br />
(6-48) and 96/384 well plates<br />
• Cuvettes format: standard cuvettes,<br />
10mm pathlength, 5-10mm pathwidth<br />
• Temperature control:<br />
4°C above ambient up to 45°C<br />
• Fast measurement:<br />
11 seconds for 96 wells<br />
19 seconds for 384 wells<br />
• Optional ADAP Prisma Software<br />
(refer to ADAP Software section for details)<br />
ADDITIONAL FEATURES FOR STAND ALONE<br />
• Comprehensive onboard software with<br />
stored routines for nucleic acid quantitation<br />
and characterisation (equivalent to ADAP<br />
Prisma functionality)<br />
• Integrated Windows CE (LAN - interface)<br />
enables data transfer from the laboratory to<br />
the office<br />
Zenyth 200rt<br />
PC controlled version,<br />
serial interface,<br />
ADAP Basic software,<br />
temperature control<br />
Zenyth 200st Stand alone version,<br />
onboard software,<br />
ADAP Basic software,<br />
temperature control<br />
ORDERING INFORMATION:<br />
Zenyth 200rt Part Number GF 25 700 01<br />
Zenyth 200st Part Number GF 25 800 01<br />
TECHNICAL DETAILS<br />
<strong>Anthos</strong> Zenyth 200rt 200st<br />
Instrument Description: Microplate Spectrophotometer ✔ ✔<br />
Light Source: Tungsten Halogen and Deuterium Lamps ✔ ✔<br />
Photodetector: Silicon Photodiode ✔ ✔<br />
Wavelength Range: 190 - 1000nm ✔ ✔<br />
Bandwidth: 5nm ✔ ✔<br />
Resolution: 0.0001 Abs ✔ ✔<br />
Absorbance Range: 0.000 - 4.000 Abs ✔ ✔<br />
Reproducibility:<br />
The <strong>Anthos</strong> Zenyth 340 is a universal microplate reader for a wide<br />
range of colorimetric assays. The instrument is equally suitable for<br />
basic research and routine applications.<br />
TECHNICAL DETAILS<br />
<strong>Anthos</strong> Zenyth 340r and rt 340s and st<br />
Photometric Method: Transmission Photometer ✔ ✔<br />
Light Source: Tungsten Halogen Lamp ✔ ✔<br />
Photodetector: Silicon Photodiode ✔ ✔<br />
Wavelength Range: 340 - 750nm ✔ ✔<br />
Resolution: 0.0001 Abs (0 - 1 Abs) ✔ ✔<br />
Indication Range: 0.000 - 4.00 Abs ✔ ✔<br />
Accuracy:
The <strong>Anthos</strong> Fluido washer combines ease of use and excellent<br />
performance for both absorbance based and luminescence based<br />
assay procedures.<br />
MICROPLATE WASHERS<br />
6<br />
AVAILABLE CONFIGURATIONS:<br />
Fluido 96W2<br />
8 and 12-way manifolds.<br />
Washing of 96 well plates with 8-way<br />
manifold or 12-way manifold.<br />
2 liquid lines available for either<br />
1 wash and 1 rinse solution or<br />
2 different wash solutions.<br />
Fluido 96W4<br />
8 and 12-way manifolds.<br />
Washing of 96 well plates with 8-way<br />
manifold or 12-way manifold.<br />
4 liquid lines available for either<br />
3 wash and one rinse solution or<br />
4 different wash solutions.<br />
Fluido 384W2<br />
8 and 16-way manifolds.<br />
Washing of 96 (8-way manifold) and<br />
384 well plates (16-way manifold).<br />
2 liquid lines available for either<br />
1 wash and 1 rinse solution or<br />
2 different wash solutions.<br />
Fluido 384W4<br />
8 and 16-way manifolds.<br />
Washing of 96 (8-way manifold) and<br />
384 well plates (16-way manifold).<br />
4 liquid lines available for either<br />
3 wash and one rinse solution or<br />
4 different wash solutions.<br />
ORDERING INFORMATION:<br />
Fluido 96W2 GF 24 100 01<br />
Fluido 96W4 GF 24 200 01<br />
Fluido 384W2 GF 24 100 03<br />
Fluido 384W4 GF 24 200 03<br />
Key Features<br />
• Up to 4 different wash channels<br />
• Vacuum and pressure free system<br />
for quiet operation<br />
• Easy operation with colour coded tube<br />
fittings<br />
• Bottom and overflow washing<br />
• Crosswise aspiration for low residual<br />
volumes<br />
• 3 different rinse modes<br />
• Easy plate setup (bottom detection and<br />
travel height position for fast processing)<br />
• Automatic well depth detection<br />
• Automatic travel height positioning for fast<br />
plate processing<br />
• 20 different cycles, 50 different procedures<br />
and 20 plates available<br />
• Optional Upgrade-Kit for washing<br />
384 well plates<br />
Fluido<br />
Microplate<br />
Washer<br />
ADDITIONAL FEATURES<br />
• Aerosol Protection Cover<br />
• Emergency Stop (avoids spilling<br />
of hazardous liquids)<br />
• Optional Liquid Level Warnings<br />
and Liquid Level Sensors<br />
• Optional autoclaveable<br />
manifolds (8 and 16 way)
TECHNICAL DETAILS<br />
<strong>Anthos</strong> Fluido 96W2 96W4 384W2 384W4<br />
Instrument Description: Microplate Washer ✔ ✔ ✔ ✔<br />
Manifolds:<br />
8 and 12-way manifolds ✔ ✔<br />
8 and 16-way manifolds ✔ ✔<br />
Dispensed Volumes:<br />
50 - 2000μl in 50μl increments (for 8 and 12-way manifolds) ✔ ✔<br />
50 - 500μl in 25μl increments (for 16-way manifold) ✔ ✔<br />
Dispensing Precision:<br />
< 5% at 300μl across the plate (for 8 and 12-way manifolds) ✔ ✔<br />
< 5% at 100μl across the plate (for 16-way manifold) ✔ ✔<br />
Residual Volume:
The <strong>Anthos</strong> Lucy 2 and Lucy 3 are dual mode luminescence and<br />
absorbance microplate readers particularly relevant for Life Science,<br />
Forensic and Gene assay applications.<br />
MICROPLATE READERS<br />
8<br />
AVAILABLE CONFIGURATIONS:<br />
Lucy 2 PC controlled Basic Instrument<br />
Lucy 3 Stand alone Basic Instrument<br />
Lucy 2 PC controlled Single Dispenser<br />
Lucy 3 Stand alone Single Dispenser<br />
Lucy 2 PC controlled Twin Dispenser<br />
Lucy 3 Stand alone Twin Dispenser<br />
ORDERING INFORMATION:<br />
Lucy 2 PC Basic GF 18 900 11<br />
Lucy 2 PC Single GF 18 550 11<br />
Dispenser<br />
Lucy 2 PC Twin GF 18 650 11<br />
Dispenser<br />
Lucy 3 Basic GF 19 900 11<br />
Lucy 3 Single<br />
Dispenser GF 19 550 11<br />
Lucy 3 Twin GF 19 650 11<br />
Dispenser<br />
Lucy 2 and Lucy 3<br />
Microplate Readers<br />
Key Features<br />
• Flash Kinetic Luminescence<br />
• Glow Kinetic Luminescence<br />
• Fast Flash Kinetic Mode (intervals in the<br />
microsecond range)<br />
• Absorbance Measurement<br />
• Spectral Sensitivity Range from<br />
300 to 650nm<br />
• Capacity for 15 filters - gives highest<br />
flexibility when switching from luminescent<br />
ELISA (LIA) to absorbance ELISA.<br />
• Programmable Shaking<br />
• ADAP Basic Software for user administration,<br />
kinetic data reduction and flexible data<br />
management and data storage<br />
• Dispensers (optional)<br />
High Precision FMI Pumps<br />
Volume 50μl - 300μl in 50μl increments<br />
Metal free, exchangeable tubing<br />
• Choice of various software packages<br />
(refer to ADAP Software section for details)
Twin Dispenser<br />
TECHNICAL DETAILS<br />
ADDITIONAL FEATURES FOR LUCY 3<br />
• Onboard Software<br />
• Flexible Plate Layout with Blanks,<br />
Standards and Controls<br />
• Comprehensive quantitative and qualitative<br />
data-evaluation with curve-fits, cut-offs and<br />
transformation formulae<br />
• Multiple kinetic data reduction modes,<br />
combined with further quantitative and<br />
qualitative evaluation<br />
• Variables, test-validation and automatic<br />
replicate elimination<br />
• Integrated Dispenser programming with<br />
security features (volume control, prime<br />
control)<br />
• Language selection (English and German)<br />
• Interface and data storage<br />
• Large colour display with graphics<br />
• 5.5 MB onboard Data Memory<br />
• Evaluated Data export with ADAP Software<br />
MICROPLATE READERS<br />
9<br />
<strong>Anthos</strong> Luminometer Lucy 2 Lucy 3<br />
Detection System: Photon Counting PMT ✔ ✔<br />
Luminescence Sensitivity Range: 300 - 650nm ✔ ✔<br />
Luminescence Sensitivity at 545nm: 0.2fW, 50 amol ATP (typical) ✔ ✔<br />
Luminescence Indication Range: 0.001 to 99.999 RLU (kcounts/second) ✔ ✔<br />
Photometric Method: Single channel, well-centre-triggered reading ✔ ✔<br />
Photometric Wavelength Range: 405 - 650nm ✔ ✔<br />
Resolution: 0.001 Abs ✔ ✔<br />
Absorbance Range: 0.000 - 4.499 Abs ✔ ✔<br />
Accuracy:
The Thermostar is a small benchtop incubator/shaker which offers excellent performance coupled<br />
with outstanding value for money. It is extremely simple to operate, provides very accurate<br />
temperature control and has a large capacity of 4 microplates or 56 test tubes*.<br />
* Optional test tube holder required<br />
INCUBATOR/SHAKER<br />
10<br />
Thermostar<br />
Incubator/Shaker<br />
Key Features<br />
• Wide temperature range from ambient<br />
to 100°C<br />
• Digital readout of all parameters - RPM,<br />
temperature, time, acceleration in running or<br />
stand-by mode<br />
• Parameter values can be changed<br />
while in operation<br />
• Last parameter values reside in memory<br />
after switch-off<br />
• Precision adjusted and maintained<br />
temperature regulation (within 0.5°C<br />
absolute deviation from set temperature)<br />
• Incorporated STEP and HOLD time<br />
functions with one minute resolution<br />
• Incorporated MOMENTARY RUN function<br />
with one second resolution<br />
• Three different levels of start-up speed<br />
• Simple user interface<br />
• Easily interchangeable plastic platforms for<br />
test tubes and stainless steel platforms for<br />
microplates<br />
• Large capacity (56 test tubes or<br />
4 microplates)<br />
• Lid sensor to prevent possible<br />
overheating spikes<br />
TECHNICAL DETAILS<br />
RPM regulation:<br />
Shaker orbit:<br />
Temperature range:<br />
Temperature uniformity:<br />
Warm up time:<br />
Timer:<br />
Maximum capacity:<br />
Dimensions:<br />
Weight:<br />
Power:<br />
Digital, load independent, from 200 to 1300 RPM in steps of 10 RPM<br />
3 mm<br />
Ambient to 100°C, max. 45°C for microplates<br />
Absolute deviation +/- 1 digit<br />
9°C/minute typically<br />
1 - 999 minutes in 1 minute steps<br />
56 test tubes or 4 microplates<br />
26.5cm x 24.5cm x 22.5cm (WxLxH)<br />
11Kg<br />
230 V/50 Hz, 115 V/60 Hz, 500 W
PRODUCT SELECTION<br />
Product Selection<br />
11<br />
Microplate PC Control Onboard Wavelength Plate Wavelength Absorbance mode Reading<br />
Readers via ADAP Software Software Range Formats Selection Endpoint Kinetic Spectral Speed Shaking Comments<br />
Analysis Analysis Scanning<br />
2010 ✔ x 400-750nm 96 Filterwheel, 4 standard filters ✔ ✔ x 96 well - 30 seconds x Affordable, robust<br />
(405, 450, 492, 620) for routine<br />
May hold up to 8 filters<br />
absorbance assays<br />
2020 ✔ ✔ 400-750nm 96 Filterwheel, 4 standard filters ✔ ✔ x 96 well - 30 seconds x Affordable, robust<br />
(405, 450, 492, 620) for routine<br />
May hold up to 8 filters<br />
absorbance assays<br />
Zenyth 340r ✔ x 340-750nm 6 - 48 and 96/384 Filterwheel, 3 standard filters ✔ ✔ x 96 well - 10 seconds ✔ High performance<br />
(405, 450, 620) 384 well - 18 seconds Temperature control<br />
May hold up to 8 filters<br />
option available<br />
Zenyth 340s ✔ ✔ 340-750nm 6 - 48 and 96/384 Filterwheel, 3 standard filters ✔ ✔ x 96 well - 10 seconds ✔ High performance<br />
(405, 450, 620) 384 well - 18 seconds Temperature control<br />
May hold up to 8 filters<br />
option available<br />
Zenyth 200r ✔ x 190-1000nm 6 - 48 and 96/384 ✔ ✔ ✔ 96 well - 11 seconds ✔ Microplate and Cuvette<br />
and Monochromator 384 well - 19 seconds Spectrophotometer<br />
standard cuvettes<br />
Temperature control<br />
(10mm pathlength)<br />
option available<br />
Zenyth 200s ✔ ✔ 190-1000nm 6 - 384 and ✔ ✔ ✔ 96 well - 11 seconds ✔ Microplate and Cuvette<br />
standard cuvettes Monochromator 384 well - 19 seconds Spectrophotometer<br />
(10mm pathlength)<br />
Temperature control<br />
option available<br />
LUMINOMETERS<br />
Lucy 2 ✔ x 300-650 nm 96 Filterwheel, 4 absorbance filters ✔ x x < 1 minute ✔ High performance,<br />
1 High Pass Filter (570) per plate with single or dual<br />
May hold up to 15 filters (No dispensing) dispensing option<br />
Lucy 3 ✔ ✔ 300-650 nm 96 Filterwheel, 4 absorbance filters ✔ x x < 1 minute ✔ High performance,<br />
1 High Pass Filter (570) per plate with single or dual<br />
May hold up to 15 filters (No dispensing) dispensing option<br />
Every Microplate Reader and Luminometer comes complete with ADAP Basic software<br />
Microplate Washer Volume Range Available Configurations Dispensing Accuracy Residual Volume Parameters Rinse Modes Method Storage Manifold Options<br />
Fluido 96 50 - 2000 μl 96 well with 2 or 4 Liquid lines < 5% at 300 μl < 1 μl per well Adjustable parameters Manual, automatic Up to 20 8 and 12 way<br />
in 50 μl increments to be used for wash buffers (8 and 16 way manifolds) for dispensing, soaking, and periodic different cycles manifolds with<br />
and rinse liquid, as required aspirating and shaking 50 procedures autoclaveable options<br />
and 20 plates<br />
Fluido 384 50 - 2000 μl 96 and 384 well with 2 or 4 Liquid lines < 5% at 300 μl < 1 μl per well Adjustable parameters Manual, automatic Up to 20 8 and 16 way<br />
in 25 μl increments to be used for wash buffers (8 and 16 way manifolds) for dispensing, soaking, and periodic different cycles manifolds with<br />
and rinse liquid, as required < 5% at 100 μl aspirating and shaking 50 procedures autoclaveable options<br />
(16 way manifold) and 20 plates
Nordstrasse 4<br />
A5301 Eugendorf, Austria<br />
T: (43) 6225 - 3241<br />
F: (43) 6225 - 2549<br />
E: anthos-sales@asyshitech.com<br />
www.anthos-labtec.com<br />
A Harvard Bioscience <strong>Company</strong>