Synthetic Lifting Slings - Wesco Industries Ltd.

PROCRAFT
WEB SLINGS
INTRODUCTION
Procraft synthetic webbing slings are generally manufactured from
Nylon, but can also be manufactured from Polyester. The light weight
of the material, combined with superior flexibility have made these
slings popular with riggers over the years. Webbing slings will not
scratch or deface loads and the webbing’s flexibility will form a secure
grip around the load to be lifted.
Slings manufactured from Nylon will stretch between 6% to 8% and
should be used if alkalis are present, while Polyester slings will stretch
approxiametly 3% and should be used where acids exist.
Synthetic webbing used to manufacture slings have a chemically
treated surface to increase abrasion resistance, seal out moisture, and
prevent grit from attacking the webbing internally. The webbing is
unaffected by moisture, mildew, rot and certain chemicals.
SLING MANUFACTURE
Procraft web slings are manufactured to strict quality standards, and
our constant in house testing and quality analysis of all materials and
fabrication procedures ensure users a superior product. Slings can be
manufactured in either single or multiple plies, and may include
accessories such as wear pads, sleeves and end fittings. Several
types and configurations are available. The following system is used
to identify different types at time of order:
Sling Type (2 letters)
EE - Eye each end
EN - Endless
TC - Triangle & Choker
TT - Triangle each end
ER - Reverse eye each
end
Indicates the
number of plies in
sling. (1,2,3 or 4)
Webbing material
capacity.
Webbing width in
inches (1 to 12).
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS PAGE 2