designed for modern living - Legrand

Consumer units
designed
for modern
living
THE GLOBAL SPECIALIST
IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

DESIGN
is all around us
Modern interiors revolve around minimalist, sophisticated
interior design themes consisting of clean lines, neutral
tones and maximised use of space.
Designed to blend in with the modern environment,
Legrand’s new consumer units are perfectly placed to
stand the test of time.

CONSUMER UNITS...
DESIGN OF THE TIMES
Legrand’s insulated and metal consumer units are
manufactured to white RAL 9003, creating a stylish,
understated inish which blends in perfectly with
modern interiors.
MEETING THE DEMANDS
OF MODERN LIVING
There is an increasing demand for additional electrical
circuits due to the popularity of smart home solutions,
and a growing requirement for dedicated circuits for
items such as hard wired smoke detectors, photovoltaic
panels and electric vehicle charging points.
Legrand’s consumer units are available with up to 22
ways, including a custom build option which offers
complete choice and lexibility.
Discreet semi-flush mounting option available
Increasing popularity of home automation and control
Growth in requirement for dedicated circuits
The demands of modern
living have led to the
requirement for an
increased number of
electrical circuits
WWW.LEGRAND.CO.UK
3

design
is more than
skin deep
With an array of design innovations making
them easy to install, Legrand’s consumer
units save valuable time and money during
installation... allowing you to relect on the
generous wiring space and the all-round
extra protection.
Rigid base with
multiple cut-outs
Removable terminal
holders with screws in
backed-off position
White RAL 9003
case with high ire
retardancy.
Self extinguishing
at 750°C
Removable
pan assembly
Cut-to-length busbar
for lexible on-site
coniguration
Insulated
shield
Hinged door conceals
protection devices and
labelling
Rail positioned
for maximum
cabling space
Legrand consumer units
are itted as standard with
80 A RCDs
4

Guide to choosing the right
consumer unit coniguration
under the 17th Edition
Dual RCD split load with dedicated main switch ways -
Select MCBs and RCBOs to complete installation
EASY ACCESS
Features include a
removable pan assembly,
earth terminal holder that
simply clips into place, and
multiple cut-outs to the
unit’s back, bottom, top
and sides.
Dual RCD split load -
Select MCBs to complete installation
ON-SITE
CONFIGURATION
For lexible on-site
coniguration, simply cut
busbar to the required
length.
Main switch incomer -
Select RCBOs to complete installation
PROTECTION
OPTIONS
Legrand has everything
you need to complete
your installation: isolating
switches, RCDs, NEW RX 3
MCBs and RCBOs.
RCD incomer -
Select MCBs to complete installation
Custom build -
Maximum lexibility
WWW.LEGRAND.CO.UK
5

consumer units
insulated and metal
NEW
Insulated consumer units
Conform to BS EN 60439-3. IP 30. RAL 9003. White colour. Plain door opens downwards
Supplied with neutral and earth terminals completely assembled. Supplied with 5 module spare blank plate
Factory fitted link leads for both neutral and live connections. Configurable outgoing ways
Self-extinguishing at 750 °C. UL 94 V2 material for improved flame retardancy. Robust thermoplastic construction. 4 fixing holes
Dimensions
p. 11
High integrity dual RCD split
load with 2 unprotected ways
100 A main switch and
2 x 80 A 30 mA RCD
Dual RCD split load
100 A main switch and
2 x 80 A 30 mA RCD
Dual RCD split load -
semi flush
100 A main switch and
2 x 80 A 30 mA RCD
Total outgoing ways
2 4 6 8 10 12 14 16 18 20 22
– – – – 6075 70 – – 6075 71 – – –
– – – – 6075 57 – – 6075 58 – – –
– – – – 8204 10 – – 8204 09 – – –
Main switch incomer
63 A main switch
6075 63 – – – – – – – – – –
Main switch incomer
100 A main switch
– – 6075 59 – 6075 60 – 6075 66 – – 6075 67 –
RCD incomer
80 A 30 mA RCD
– – 6075 64 – 6075 65 – – – – – –
Custom build
– 6075 68 – 6075 61 – 6075 62 – – – – –
Metal consumer units
Conform to BS EN 60439-3. IP 30. RAL 9003. White colour. Plain door opens downwards
Supplied with neutral and earth terminals completely assembled. Supplied with 5 module spare blank plate
Factory fitted link leads for both neutral and live connections. Configurable outgoing ways
Pre-galvanised steel for strength and rigidity. Epoxy/polyester powder coated base and lid
Dimensions
p. 12
Dual RCD split load
100 A main switch and
2 x 80 A 30 mA RCD
Total outgoing ways
6 8 10 12 14 16 18 20 22
– – 6065 57 – – 6065 58 – – –
Main switch incomer
100 A main switch
6065 59 – 6065 60 – – – – – –
Custom build
– 6065 61 – 6065 62 – 6065 50 – – 6065 51
6

protection devices
MCBs and RCBOs
RX 3 MCBs - 6 kA
Breaking capacity :
6 kA to BS EN 60898-1
RX 3 residential MCBs - 6 kA
Single pole - 230/400 V±
RCBOs (combined MCB/RCD)
Single pole and neutral - 240 V±
RCBOs (combined MCB/RCD)
Breaking capacity :
10 kA to BS EN 61009-1
RCD type AC conform to
BS EN 61009-1
Terminal capacity :
rigid conductor 35 mm 2
flexible conductor 25 mm 2 4022 70
6064 18
Nominal rating (In)
Pack
Qty
Number of
17 . 5 mm
modules
B curve
C curve
Number of
17 . 5 mm
modules
30 mA
B curve
6 A
10 1 4022 70 4023 10 1 6064 16
10 A
10 1 4022 71 4023 11 1 6064 17
16 A
10 1 4022 72 4023 13 1 6064 18
20 A
10 1 4022 73 4023 14 1 6064 19
25 A
10 1 4022 74 4023 15 – –
32 A
10 1 4022 75 4023 16 1 6064 20
40 A
10 1 4022 76 4023 17 1 6064 21
50 A
10 1 4022 77 4023 18 1 6064 28
63 A
10 1 4022 78 4023 19 – –
7

insulated consumer units
surface mounting
6075 71
6075 57
6075 63 6075 64
Dimensions p.11
Conform to BS EN 60439-3. IP 30. RAL 9003 - white colour
Self-extinguishing at 750 °C - UL 94 V2 material for improved flame retardancy
Robust, rigid thermoplastic construction with 4 fixing holes
Door opens downwards
Supplied with neutral and earth terminals completely assembled
Supplied with 5 module spare blank plate (except 4 module unit)
MCBs to be ordered separately, (see p. 10)
Rigid base with multiple cut-outs
Removable terminal holders with screws in backed-off position
Insulated shield
Cut-to-length busbar
Removable pan assembly
New
image
VC to
supply
RX 3 residential MCBs and
single module RCBOs p. 10
Pack
NEW
Cat. Nos. Insulated high integrity dual RCD split load
with 2 unprotected ways - surface mounting
16 module unit (8 + 2 ways available)
1 6075 70 With 100 A main switch and 2 x 80 A 30 mA RCD
22 module unit (13 + 3 ways available)
1 6075 71 With 100 A main switch and 2 x 80 A 30 mA RCD
NEW
Insulated dual RCD split load - surface
mounting
16 module unit (10 ways available)
1 6075 57 With 100 A main switch and 2 x 80 A 30 mA RCD
22 module unit (16 ways available)
1 6075 58 With 100 A main switch and 2 x 80 A 30 mA RCD
NEW
Insulated dual RCD split load - semi-flush
mounting
16 module unit (10 ways available)
1 8204 10 With 100 A main switch and 2 x 80 A 30 mA RCD
22 module unit (16 ways available)
1 8204 09 With 100 A main switch and 2 x 80 A 30 mA RCD
Insulated with incomer - surface mounting
4 module unit
1 6075 63 With 63 A main switch (2 ways available)
8 module unit
1 6075 59 With 100 A main switch (6 ways available)
1 6075 64 With 80 A 30 mA RCD (6 ways available)
12 module unit
1 6075 60 With 100 A main switch (10 ways available)
1 6075 65 With 80 A 30 mA RCD (10 ways available)
16 module unit
1 6075 66 With 100 A main switch (14 ways available)
22 module unit
1 6075 67 With 100 A main switch (20 ways available)
Pack
Cat. Nos. Insulated custom build - surface mounting
Allow several configurations when using kits and
incomers (isolating switches, RCDs, RCBOs)
For kits, (see p. 215)
For incomers and outgoing devices, (see p. 10)
1 6075 68 4 modules available
1 6075 61 8 modules available
1 6075 62 12 modules available
NEW
Accessories for surface mounting units
Lockable brackets
1 8218 57 For 16 module unit
1 8218 58 For 22 module unit
NEW
Padlock
3 4063 13 Ø 4 m
Accessories for semi-flush mounting units
Lockable brackets
1 8204 71 For 16 module unit
1 8204 72 For 22 module unit
NEW
Padlock
3 4063 13 Ø 4 m
8

metal consumer units
surface mounting
NEW
Available May 2013
accessories
for insulated and metal consumer units
RX 3 residential MCBs and
single module RCBOs p. 10
6065 62
Dimensions p. 12
Conform to BS EN 60439-3. IP 30. RAL 9003 - white colour
Pre-galvanised steel for strength and rigidity
Door opens downwards
Supplied with neutral and earth terminals completely assembled
Supplied with 5 module spare blank plate
MCBs to be ordered separately, (see p. 10)
Pack
Cat. Nos. Metal dual RCD split load - surface mounting
16 module unit (10 ways available)
1 6065 57 With 100 A main switch and 2 x 80 A 30 mA RCD
22 module unit (16 ways available)
1 6065 58 With 100 A main switch and 2 x 80 A 30 mA RCD
Metal with incomer - surface mounting
Epoxy/polyester powder coated base and lid
Stand-off feet complete with keyhole fixing
8 module unit
1 6065 59 With 100 A main switch (6 ways available)
12 module unit
1 6065 60 With 100 A main switch (10 ways available)
Metal custom build - surface mounting
Epoxy/polyester powder coated base and lid
Stand-off feet complete with keyhole fixing
Allow several configurations when using kits and
incomers (isolating switches, RCDs, RCBOs)
For kits, (see opposite)
For incomers and outgoing devices, (see p. 10)
1 6065 61 8 modules available
1 6065 62 12 modules available
1 6065 50 16 modules available
1 6065 51 22 modules available
Pack
Cat. Nos. Accessories
Incomer or dual tariff kit
1 6075 19 Comprises : 1 flexible neutral (blue) lead
1 rigid neutral link
Split load kit
1 6075 39 Comprises : 1 flexible live (brown) lead
1 flexible neutral (blue) lead
2 rigid neutral links
Split load dual tariff kit (for insulated units only)
1 6075 49 Comprises : 1 flexible live (brown) lead
2 flexible neutral (blue) leads
2 rigid neutral links
1 neutral terminal
NEW
Spare blank plate RAL 9003
20 0016 60 5 modules - white colour
Spare blank plate RAL 9010
10 0016 64 18 module, separable by single or half modules
Spare busbar
5 6075 99 21 prongs
NEW
Spacing elements
10 4063 07 0·5 module
Locking device for MCBs and RCDs
2 4063 03 Locking attachment for Ø 4 mm and
Ø 6 mm padlocks
NEW
Padlock for MCBs and RCDs
3 4063 13 Padlock Ø 4 m
Spare terminal block
1 8204 07 13 hole
Self-adhesive label holder
10 0049 96 Width : 16 mm
Width available for marking : 12 mm
Length 530 mm (24 modules)
0049 96
9

protection and control devices
4022 70
6064 18
4020 27 4064 55
4125 44 4130 91
Pack Cat. Nos. RX 3 residential MCBs - 6 kA
Breaking capacity : 6 kA to BS EN 60898-1
Single pole - 230/400 V±
B curve C curve Nominal rating Number of
(In)
17·5 mm modules
10 4022 70 4023 10 6 A 1
10 4022 71 4023 11 10 A 1
10 4022 72 4023 13 16 A 1
10 4022 73 4023 14 20 A 1
10 4022 74 4023 15 25 A 1
10 4022 75 4023 16 32 A 1
10 4022 76 4023 17 40 A 1
10 4022 77 4023 18 50 A 1
10 4022 78 4023 19 63 A 1
DX 3 multi-purpose MCBs - 10 kA
Breaking capacity : 10 kA to BS EN 60947-2
Single pole - 230/400 V±
B C B curve C curve Nominal rating Number of
(In)
17·5 mm modules
1 1 4074 29 4076 66 6 A 1
1 10 4074 30 4076 68 10 A 1
1 10 4074 32 4076 70 16 A 1
1 1 4074 33 4076 71 20 A 1
1 1 4074 35 4076 73 32 A 1
1 1 4074 36 4076 74 40 A 1
1 1 4074 37 4076 75 50 A 1
1 1 4074 38 4076 76 63 A 1
NEW
RCBOs (combined MCB/RCD) -
Single module
Breaking capacity : 10 kA to BS EN 61009-1
RCD type AC conform to BS EN 61009-1
Terminal capacity : rigid conductor 35 mm 2
flexible conductor 25 mm 2
Single pole and neutral - 240 V±
B curve Nominal rating Number of
(In)
17·5 mm modules
30 mA
1 6064 16 6 A 1
1 6064 17 10 A 1
1 6064 18 16 A 1
1 6064 19 20 A 1
1 6064 20 32 A 1
1 6064 21 40 A 1
1 6064 28 50 A 1
Pack
Cat. Nos. RX 3 residual current devices (RCDs)
Conform to BS EN 61008-1
Terminal capacity : rigid conductor 35 mm 2
flexible conductor 25 mm 2
Double pole 230 V±
Type AC Nominal rating Number of
(In)
17·5 mm modules
30 mA
1 4020 24 25 A 2
1 4020 25 40 A 2
1 4020 26 63 A 2
1 4020 27 80 A 2
100 mA
1 4020 28 25 A 2
1 4020 29 40 A 2
1 4020 30 63 A 2
NEW
DX 3 Isolating switches
Conform to BS EN 60947-3, IEC 60669-1
Usage : AC 22 according to IEC 60947-3
Red handle
Double break contacts, padlockable
50 mm 2 capacity shielded terminals
Number of
17·5 mm modules
5 4064 53 63 A double pole 2
5 4064 55 100 A double pole 2
NEW
NEW
CX 3 Contactor with 230 V± coil
Conforms to BS EN 61095
Double pole (L + N) 250 V±
230 V± coil circuit Type of Number of
I max. contact 17·5 mm
modules
230 V
1 4125 44 25 A 2 N/O 1
NEW
For other contactors, see current Industrial and
Power Protection catalogue
Bell transformers
d
Conform to IEC/EN 61558-2-8
Supplied with label holder
Protected against overloads and short circuits
Power to 8 V-12 V or 24 V access control devices
such as bells and chimes
Possibility for supply busbars to run through
(Cat. Nos. 4130 90/91)
Number
Secondary (V) Rating (A) Power (VA) of 17·5 mm
modules
230 V / 8 V
1 4130 90 8 V± 0·5 A 4 VA 2
230 V / 12 V - 8 V
1 4130 91 12/8 V± 0·66/1 A 8 VA 2
230 V / 24 V - 12 V
1 4130 93 24/12 V± 1/1·5 A 24/18 VA 4
10

insulated consumer units
surface mounting
n Insulated - surface mounting dimensions (mm)
A 110
n 8 module unit
Back box fixing centres and cable entries (mm)
View from
above
2 cut-outs
50 x 50
2 cut-outs
40 x 50
50
B
195
20
40
50
6 cut-outs
20 x 25 8 cut-outs
25 x 25
View from
sides
2 cut-outs
20 x 25
Modules A (mm) B (mm)
4 140 225
225
114
162
8 212 225
12 298 225
14/16 370 225
20/22 478 225
6 cut-outs 20 x 25
n 4 module unit
Back box fixing centres and cable entries (mm)
View from
below
View from
above
1 cut-out
50 x 50
1 cut-out
40 x 50
40
20
50
n 12 module unit
Back box fixing centres and cable entries (mm)
4 cut-outs
20 x 25
4 cut-outs
25 x 25
View from
sides
View from
above
2 cut-outs
50 x 50
2 cut-outs
40 x 50
225
114
2 cut-outs
20 x 25
40
20
90
225
180
6 cut-outs
20 x 25
2 cut-outs
20 x 18 . 5
22 cut-outs
25 x 20
50
View from
sides
2 cut-outs
20 x 25
4 cut-outs 20 x 25
268
View from
below
2 cut-outs 20 x 25
2 cut-outs 20 x 18 . 5
View from
below
11

insulated consumer units
surface mounting (continued)
metal consumer units
surface mounting
n 14/16 module unit
Back box fixing centres and cable entries (mm)
View from
above
2 cut-outs 50 x 50 2 cut-outs 40 x 50
n Metal - surface mounting dimensions (mm)
A 113
20
40
B
50
10 cut-outs 20 x 25
30 cut-outs 25 x 20
View from
sides
225
180
2 cut-outs
20 x 25
Modules A (mm) B (mm)
8 219 235
50
200
12 305 235
340
16 377 235
22 485 235
8 cut-outs 20 x 25
n 8 module unit
Back box fixing centres and cable entries (mm)
View from
below
View from
above
4 cut-outs Ø 32
n 20/22 module unit
Back box fixing centres and cable entries (mm)
100
View from
above
2 cut-outs 50 x 50 2 cut-outs 40 x 50
1 obround
cut-out 100 x 50
40
20
2 cut-outs 20 x 22 12 cut-outs 20 x 25
50
95 80
4
Ø 5
42 cut-outs 25 x 20
View from
sides
Ø 9
3
2 cut-outs
20 x 25
View from
below
225
180
1 cut-out Ø 25
448
2 cut-outs 20 x 22
10 cut-outs 20 x 25
View from
below
12

metal consumer units
surface mounting (continued)
n 12 module unit
Back box fixing centres and cable entries (mm)
4 cut-outs Ø 32
n 22 module unit
Back box fixing centres and cable entries (mm)
4 cut-outs Ø 25
View from
above
View from
above
175
350
120
95 80
1 obround
cut-out 100 x 50
95 80
2 obround
cut-outs 100 x 50
100
View from
below
275
8 cut-outs Ø 20
4 cut-outs Ø 32
n 16 module unit
Back box fixing centres and cable entries (mm)
4 cut-outs Ø 20
250
120
2 obround
cut-outs 100 x 50
95 80
2 cut-outs Ø 20
2 cut-outs Ø 25
View from
below
View from
above
175
View from
below
4 cut-outs Ø 25
4 cut-outs Ø 32
13

Contact details
United Kingdom
Great King Street North,
Birmingham, B19 2LF
Customer Services:
Tel: +44 (0) 845 605 4333 Fax: +44 (0) 845 605 4334
E-mail: legrand.sales@legrand.co.uk
Quotations and Technical Support:
Tel: +44 (0) 870 608 9020 Fax: +44 (0) 870 608 9021
E-mail: uk-wdsales@legrand.co.uk
Republic of Ireland:
Tel: 01 295 9673 Fax: 01 295 4671
E-mail: legrand.sales@legrand.co.uk
Distributor:
Head ofice (UK and Ireland):
Legrand Electric Limited
Great King Street North, Birmingham, B19 2LF
Tel: 0870 608 9000 Fax: 0870 608 9004
Website: www.legrand.co.uk
Consumer unit product guide 04/2013.PDF
This document is printed on sustainably sourced paper. Please recycle.
The Legrand logo is a registered trademark
of the Legrand group of companies.