School of Engineering Embarks on First Hong Kong Student Exchange

engineering.cua.edu

School of Engineering Embarks on First Hong Kong Student Exchange

cuaengineer

■ Lucko, G.,Gonzalez, E. C., Sherwin, J. C., Collins,

E. L., Gilmore, B. M., Pisani, D. A., Heisman,

E. A., Smith, A. T., and Murray, T. M., “Engineers

Without Borders — Santa Clara, El Salvador,

assessment trip,” ong>Schoolong> ong>ofong> ong>Engineeringong>,

Catholic University ong>ofong> America, Washington,

D.C., 2008.

■ Lucko, G., “Productivity Scheduling Method

Compared to Linear and Repetitive Project

Scheduling Methods,” Journal ong>ofong> Construction

ong>Engineeringong> and Management (in press).

■ Shapira, A., Lucko, G., and Schexnayder, C.

J., “Cranes for Building Construction Projects,”

Journal ong>ofong> Construction ong>Engineeringong> and

Management, 50 th Anniversary Special Issue

(invited paper; peer-reviewed), Vol.133, Issue

9, pp. 690–700, Sept. 2007.

■ Dromerick, A. W., Schabowsky, C. N., Holley,

R. J., Monroe, B., Markotic, A., and Lum, P. S.,

“Effect ong>ofong> training on upper extremity prosthetic

limb performance and motor learning:

An n=1 study,” Archives ong>ofong> Physical Medicine

and Rehabilitation (in press).

■ Lum, P. S., “Improvements in upper extremity

function with mass-practice therapy,”

American Congress ong>ofong> Rehabilitation Medicine

Annual Conference, Washington D.C., 2007.

■ Schabowsky, C. N., Hidler, J. M., and Lum, P.

S., “Greater reliance on impedance control in the

nondominant arm compared with the dominant

arm when adapting to a noveldynamic environment,”

Experimental Brain Research, Vol.

182, Issue 4, pp. 567–577, Oct. 2007.

■ Schabowsky, C. N., Dromerick, A. W., Holley,

R. J., Monroe, B., and Lum, P. S., “Transradial

upper extremity amputees are capable ong>ofong>

adapting to a novel dynamic environment,”

Experimental Brain Research (in press).

■ Auyeung, Raymond C. Y., Heungsoo, K.,

Mathews, S. A., and Piqué, A., “Laser Direct-

Write ong>ofong> Metallic Nanoparticle Inks,” Journal

ong>ofong> Laser Micro/Nanoengineering, Vol. 2, No. 1,

pp. 21–25, 2007.

■ Barnard, R., Gray, B., Pauca, V., Torgersen, T.,

Mirotznik, M. S., Van der Gracht, J., Plemmons,

R., Behrmann, G., Mathews, S. A., and Prasad,

S., “PERIODIC: State-ong>ofong>-the-Art Array Imaging

Technology,” in Proc. 2007 ACM Southeast

Conference, March 2007, pp. 544 – 546.

■ Mathews, S. A., Mirotznik, M. S., Good, B. L.,

and Piqué, A., “Rapid prototyping ong>ofong> frequency

selective surfaces by laser direct-write,” in

Proc. SPIE, (invited), San Jose, Calif., Jan.

2007, Vol. 6458, pp. 64580R-1–64580R-14.

■ Mathews, S. A., “Microscale Fabrication

Techniques ong>ofong> EHD Pumps,” Interagency

Advanced Power Group, Fort Belvoir, Md., April

2007.

■ Mathews, S. A., Judge, J., and Ortega, C.,

“A Myoelectric Interface for Video Games,” in

Proc. Twenty-Third Southern Biomedical

ong>Engineeringong> Conference: BIOMEDICAL ENGI-

NEERING Recent Developments, ISBN 1-

930636-06-7, April 2007.

24 | cuaengineer

■ Mathews, S. A., “Rapid Prototyping ong>ofong> an

Electro-Hydro-Dynamic MicroPump using

Laser MicroFabrication,” Swales Aerospace

Corp., Beltsville Md., June 2007.

■ Mathews, S. A., Chaipar, N. A., Metkus, K., and

Piqué, A., “Manufacturing Microelectronics

Using ‘Lase-and-Place,” Photonics Spectra,

Vol. 41, No. 10, pp. 70–74, October 2007.

■ Mathews, S. A., Auyeung, R. C. Y., and Piqué,

A., “Use ong>ofong> Laser Direct-Write in Micro-electronics

Assembly,” Journal ong>ofong> Laser Micro/

Nanoengineering, Vol. 2, No. 1, pp. 103–107,

2007.

■ Piqué, A., Charipar, N. A., Auyeng, R. C. Y., Kim, H.,

and Mathews, S. A., “Assembly and Integration

ong>ofong> Thin Bare Die Using Laser Direct-Write,” in

Proc. SPIE, (invited), San Jose, Calif., Jan.

2007, Vol. 6458, pp. 645802-1–645802-10.

■ Ramella-Roman, J. C., and Mathews, S. A.,

“Spectroscopic measurements ong>ofong> oxygen saturation

in the retina,” IEEE Journal on Selected

Topics in Quantum Electronics, Vol.13, No. 6,

pp. 1697–1703, Nov.–Dec. 2007.

■ Mavroeidis, G. P., “Friction problems in earthquake

source mechanics,” NSF Workshop on

Friction: A Grand Challenge at the Interface ong>ofong>

Solid and Fluid Mechanics, Montreux,

Switzerland, March 13–16, 2008.

■ Mavroeidis, G. P., and Papageorgiou, A. S.,

“Effect ong>ofong> fault rupture characteristics on

near-fault strong ground motions,” in Proc.

Fourteenth World Conference on Earthquake

ong>Engineeringong> (14WCEE), Beijing, China, Oct.

12–17, 2008.

■ Mavroeidis, G. P., Zhang, B., Dong, G.,

Papageorgiou, A. S., Dutta, U. and Biswas, N.

N., “The Great 1964 Prince William Sound,

Alaska, earthquake (M w =9.2): Estimation ong>ofong>

strong ground motion,” in Proc. Fourteenth

World Conference on Earthquake ong>Engineeringong>

(14WCEE), Beijing, China, Oct. 12–17, 2008.

■ Curt, P. F., Durbano, J. P., Bodnar, M. R., Shi,

S., and Mirotznik, M. S., “Enhanced

Functionality for Hardware-Based FDTD

Accelerators,” Applied Computational

Electromagnetics Society (ACES) Journal, Vol.

22, No. 1, pp. 39–46, March 2007.

■ Biswas, I., Prather, D. W., Schuetz, C. A, Martin,

R. D., and Mirotznik, M. S., “Sparse aperture

detection and imaging ong>ofong> millimeter sources

via optical image-plane interferometry,” in

Proc. SPIE, Electro-Optical Remote Sensing,

Photonic Technologies and Their Applications,

(invited), Florence Italy, Sept. 2007.

■ Mait, J. N., Wikner, D. A, Mirotznik, M. S.,

Behrmann, G. P., and Van der Gracht, J.,

“Extended Depth-ong>ofong>-Field Imaging at 94 GHz,”

in Proc. OSA Technical Digest, Conference on

Computational Optical Sensing and Imaging

(COSI), Vancouver Canada, 2007.

■ Martin, R., Schuetz, C., Chen, C., Biswas, I.,

Samluk, J., Stein Jr., E., Mirotznik, M. S., and

Prather, D. W., “Two-dimensional Snapshot

Distributed Aperture Millimeter-Wave Imaging

using Optical Upconversion,” in Proc. SPIE,

Defense and Security, Orlando Fla., Feb. 2008.

■ Mirotznik, M. S., Kilic, O., Mathews, S. A.,

and Good, B., “Design ong>ofong> Moth-eye Antireflective

Surfaces at Microwave and Millimeter

Wavelengths,” in Proc. North American Radio

Science Meeting (URSI), Ottawa Canada, July

2007.

■ Mirotznik, M. S., Mathews, S. A., and Creazzo,

T., “Design ong>ofong> Diffractive Elements at Millimeter

Wavelengths using Subwavelength Cylindrical

Microstructures,” Microwave and Optical Tech.

Letters, Vol. 49, No. 8, pp. 1880–1884, Aug. 2007.

■ Mirotznik, M. S., Van der Gracht, J., Pustai,

D., and Mathews, S. A., “Design ong>ofong> cubicphase

optical elements using sub wavelength

microstructures,” Optics Express, Vol. 16, No.

2, pp. 1250–1259, Jan. 2008.

■ Mirotznik, M. S., Mathews, S. A., Good, B.,

Schuetz, C., Wikner, D., and Mait, J. N.,

“Iterative Design ong>ofong> Moth-Eye AR Surfaces at

Millimeter Wave Frequencies,” IEEE Trans on

Antennas and Propagation, Jan. 2008.

■ Smith, J. R., and Mirotznik, M. S., “Estimation ong>ofong>

Wave Spectra via Remote RF Forward Scattering

Measurements,” North American Radio Science

Meeting (URSI), Ottawa Canada, July 2007.

■ Prather, D. W., Biswas, I., Schuetz, C. A.,

Martin, R. D., and Mirotznik, M. S., “Multiple

Aperture Imaging ong>ofong> Millimeter Sources via

Image-Plane Interferometry,” in Proc. IEEE

International Geoscience and Remote Sensing

Symposium, Barcelona Spain, July 2007.

■ Schuetz, C. A., Martin, R. D., Biswas, I.,

Mirotznik, M. S., and Prather, D. W.,

“Technologies for Distributed Aperture

Millimeter-Wave Radiometric Imaging using

Optical Up-conversion,” in Proc. IEEE

International Geoscience and Remote Sensing

Symposium, Barcelona Spain, July 2007.

■ Namazi, Nader M., “Demodulation ong>ofong> FM

Data in Free-Space Optical Communication

Systems using Discrete Wavelet

Transformation,” Optical Society ong>ofong> America,

SPIE, San Diego, Calif., July 2007.

■ Namazi, Nader M., and Burris, R.,“Analytical

Approach to the Calculation ong>ofong> Probability ong>ofong>

Bit Error and Optimum Thresholds in Free-

Space Optical Communication,” Optical

ong>Engineeringong>, Vol. 0, No. 46, Feb 2007.

■ Coombe, H. S., and Nieh, S., “Analysis ong>ofong> a

Well-Stirred Burner Employing Oxygen-

Enriched Combustion for Thermophotovoltaic

and Thermionic Energy Conversion,”

Combustion Theory and Modeling, (under consideration),

pp. 1–24, 2007.

■ Coombe, H. S., and Nieh, S., “Polymer

Membrane Air Separation Performance for

Portable Oxygen-Enriched Combustion

Applications,” Energy Conversion and

Management, Vol. 48, No. 5, pp. 1499–1505,

2007.

More magazines by this user
Similar magazines