PDF (66.03 KB) - VESTAMID

VESTAMID® HTplus - Polyphthalamide
Taking the Heat
VESTAMID® HTplus belongs to the family of polyphthalamide (PPA) polymers. They combine high strength, heat stability, and chemical
stability and thus bridge the gap between the engineering plastics (e.g., PA 6 and PA 6.6) and the high-performance polymers being high
in price (e.g., PEEK, LCP).
Poly
mer
Filler
content
Base
resin
Glass fiber
Drinking
water
Flame
retardant
Rubber
bondable
Hydrolysis
Tribological
Mineral
Carbon
fiber
LDS Filaments Composites
0% M1000 M1900
10% LDS1031
15% M10315
25% M10525
30% M1033 M1633 M1933 R1033
R1133 (1)
M1533 M1063
33% HY10333
40% M1634 HY1034 M1054
45% M10345 HY10345
PA6T/X
50% M1035 M1635 HY1035 R1035
60% M1036 M1636
65% M10465
PA10T/X
0% M3000 F2001 C2000*
10% LDS3031
15% M30315
30% M3033
40% HY3034
50% M3035
60% M3036
Compounds deliverable in black and partly in natural color (1) especially for EPDM bonding; *also available as a powder C2505

Nomenclature of VESTAMID ® HTplus grades
VESTAMID ® HTplus
Color
Filler content
Filler
Modification
Polymer base
Application
[Polyphthalamide]
M1035 bl
bl = black
nc = natural
1 = 10% reinforced 3 = 30% reinforced 45 = 45% reinforced 65 = 65% reinforced
15 = 15% reinforced 33 = 33% reinforced 5 = 50% reinforced
25 = 25% reinforced 4 = 40% reinforced 6 = 60% reinforced
0 = without 3 = glass fibers 4 = glass fiber and mineral
5 = mineral 6 = carbon fiber
0 = base material, unmodified 1 = adhesion modified (K&K composite)
5 = internally lubricated 6 = drinking water
9 = flame redardant (halogenfree, UL94 V-0)
1 = PA6T/X
2 = PA10T/X
3 = PA10T/X
M = Injection Molding HY = Water / Glycol stabilized X = Extrusion
F = Filament
R = Rubber-plastic composite (K&K)
C = Composites
LDS = Laser Direct Structuring
Product description and characterization
Evonik offers three different PPA polymer types.
All are semicrystalline, semiaromatic
copolyamides.
M1000 PA6T/X
M2000 PA10T/X
M3000 PA10T/X
Various compounds are based on them. At present
the product range includes 30 compounds.
The products are distinguished by an exceptional
combination of properties:
extreme high temperature resistance
superior mechanical properties
very good chemical resistance
very good dimensional stability
easy processing
Application areas
VESTAMID® HTplus compounds are used in a wide
area of applications. In addition to parts for the
automotive industry, the machinery and apparatus
engineering, electric and electronic devices,
telecommunication, and for the water treatment
VESTAMID® HTplus is used for fiber composites,
filaments, and for household applications.
® = registered trademark September 2012
This information and all technical and other advice are based on Evonik’s present knowledge and experience. However, Evonik assumes no liability for such information or advice, including the
extent to which such information or advice may relate to third party intellectual property rights. Evonik reserves the right to make any changes to information or advice at any time, without prior
or subsequent notice. EVONIK DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SHALL HAVE NO LIABILITY FOR, MERCHANTABILITY OF THE PRODUCT OR
ITS FITNESS FOR A PARTICULAR PURPOSE (EVEN IF EVONIK IS AWARE OF SUCH PURPOSE), OR OTHERWISE. EVONIK SHALL NOT BE RESPONSIBLE FOR CONSEQUENTIAL, INDIRECT OR INCIDENTAL
DAMAGES (INCLUDING LOSS OF PROFITS) OF ANY KIND It is the customer’s sole responsibility to arrange for inspection and testing of all products by qualified experts. Reference to trade names
used by other companies is neither a recommendation nor an endorsement of the corresponding product, and does not imply that similar products could not be used.
www.vestamid.com
Evonik Industries AG High Performance Polymers 45764 Marl Germany
PHONE +49 2365 49-9227 E-MAIL evonik-hp@evonik.com