Bosch Rexroth Tightening System 350 - Rhino Assembly Corporation
Bosch Rexroth Tightening System 350 - Rhino Assembly Corporation
Bosch Rexroth Tightening System 350 - Rhino Assembly Corporation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5<br />
7<br />
4<br />
3<br />
6<br />
2<br />
7<br />
19<br />
02<br />
2a<br />
2b<br />
3<br />
1 Output drives<br />
– The suitable output drive for every tightening<br />
position<br />
– Special output drives for increased transverse<br />
forces, e.g. for wheel nutrunners, on<br />
request<br />
2 Adapter A<br />
– Connects planetary gearbox and output<br />
drive when operating without a measurement<br />
transducer<br />
2a AVR redundant adapter<br />
– Connects 2 measurement transducers<br />
2b AVG adapter<br />
– Connects the output drive and the planetary<br />
gearbox<br />
3 Measurement transducer<br />
– Non-contact, maintenance-free sensors<br />
– Direct analysis of torque, angle of turn, and<br />
gradient<br />
– Integrated cycle counter<br />
– Can be used as a redundant transducer to<br />
improve system assurance<br />
4 AR redundant adapter<br />
– Connects 2 measurement transducers<br />
5 Planetary gearbox<br />
– Several gearboxes per series to<br />
achieve short tightening times<br />
6 Transverse gearbox<br />
– Reduction of installation length<br />
7 EC motor<br />
– Reliable<br />
– Short tightening times<br />
– Excellent dynamics<br />
– Side-by-side arrangement due<br />
to low outer dimensions<br />
– High density and power<br />
efficiency<br />
<strong>Tightening</strong> Spindles