Xperience
Xperience
Xperience
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Product overview<br />
Electronics and tonearms<br />
Pre Box Amp Box Amp Box Mono Phono Box II / USB Phono Box SE II<br />
Phono Box MM Tube Box II Tube Box SE II Speed Box II Speed Box SE II<br />
Head Box II Head Box SE II Power Box II Tonearms<br />
Record player - Debut-Line<br />
Debut III Debut III E Debut III/Phono USB Debut III/Phono SB Debut SE II<br />
Record player - Classic-Line<br />
1 Xpression III 1 Xpression III Comfort 2 <strong>Xperience</strong> 2 <strong>Xperience</strong> Comfort 2 <strong>Xperience</strong> SuperPack 1<br />
2 <strong>Xperience</strong> SuperPack 2 Perspective II<br />
Record player - RPM-Line<br />
RPM 1 RPM 5 RPM 5 SuperPack RPM 6.1 SB RPM 6.1 SB SuperPack<br />
RPM 9.1 RPM 9.1 Acryl RPM 9.1 SuperPack 1 RPM 9.1 SuperPack 2 RPM 10<br />
� Models with an end-of-side switch-off: Pro-Ject Debut III E, Pro-Ject 1 Xpression III Comfort, and Pro-Ject 2 <strong>Xperience</strong> Comfort<br />
� Models with an electronic speed change between 33 and 45 r.p.m.: Pro-Ject Debut III/Phono SB, Pro-Ject 2 Xpression III Comfort,<br />
Pro-Ject 2 <strong>Xperience</strong> Comfort, Pro-Ject 2 <strong>Xperience</strong> SuperPack 1 & 2, Pro-Ject RPM 5 SuperPack and Pro-Ject RPM 6.1 SB,<br />
Pro-Ject RPM 6.1 SB SuperPack<br />
� 78 r.p.m. as a standard: Pro-Ject Debut III/Phono SB, Pro-Ject 2 Xpression III Comfort, Pro-Ject RPM 5 SuperPack<br />
and Pro-Ject RPM 6.1 SB, Pro-Ject RPM 6.1 SB SuperPack<br />
� 78 r.p.m. optional with all models except: Pro-Ject 2 <strong>Xperience</strong>, Pro-Ject 2 <strong>Xperience</strong> Comfort,<br />
Pro-Ject <strong>Xperience</strong> SuperPack 1 & 2, Pro-Ject RPM 9.1/X, Pro-Ject RPM 9.1 SuperPack 1 & 2 and Pro-Ject RPM 10<br />
� Switching between 33 / 45 and 78 r.p.m. is done by exchanging the motor and belt: Perspective II<br />
� Models equipped with an internal MM phono stage: Pro-Ject Debut III/Phono USB, Pro-Ject Debut III/Phono SB<br />
� Transparent plastic dust cover supplied with all models except Pro-Ject RPM 5, Pro-Ject RPM 5 SuperPack,<br />
Pro-Ject RPM 6.1 SB, Pro-Ject RPM 6.1 SB SuperPack, Pro-Ject RPM 9.1/X Pro-Ject RPM 9.1 SuperPack 1 & 2 and RPM 10<br />
� Dust cover optional: Pro-Ject RPM 9.1/X und Pro-Ject RPM 9.1 SuperPack 1 & 2<br />
� Universal dust cover Pro-Ject Cover it optional: Pro-Ject RPM 5, Pro-Ject RPM 5 SuperPack,<br />
Pro-Ject RPM 6.1 SB, Pro-Ject RPM 6.1 SB SuperPack, Pro-Ject RPM 9.1/X, Pro-Ject RPM 9.1 SuperPack 1 & 2 and Pro-Ject RPM 10
Technical specifications<br />
Dimensions W x H x D Debut III Debut III E Debut III/Phono USB Debut III/Phono SB Debut SE II<br />
Fitted cartridge Ortofon OM 5E Ortofon OM 5E Ortofon OM 5E Ortofon OM 5E Ortofon 510 Mk II<br />
Built in phono pre-amplifier (MM) – – 8 8 –<br />
A/D converter with USB output – – 8<br />
– –<br />
Nominal speeds<br />
A<br />
33 / 45 / 78<br />
B<br />
33 / 45<br />
A<br />
33 / 45 / 78<br />
C<br />
33 / 45 / 78<br />
A<br />
33 / 45 / 78<br />
Electronic speed change – – – 8 –<br />
End-of-side switch-off – 8 – – –<br />
Dust cover 8 8 8 8 8<br />
RCA phono sockets – – 8 – 8<br />
Feet / damping material PVC / rubber PVC / rubber PVC / rubber PVC / rubber aluminium cones / rubber<br />
Tonearm Pro-Ject 8.6 Pro-Ject 8.6 Pro-Ject 8.6 Pro-Ject 8.6 Pro-Ject 8.6<br />
Armtube / headshell made of aluminium / aluminium aluminium / aluminium aluminium / aluminium aluminium / aluminium aluminium / aluminium<br />
Eff. tonearm length / eff. tonearm mass 8,6“ (218,5mm) / 9,5g 8,6“ (218,5mm) / 9,5g 8,6“ (218,5mm) / 9,5g 8,6“ (218,5mm) / 9,5g 8,6“ (218,5mm) / 9,5g<br />
Overhang 18,5mm 18,5mm 18,5mm 18,5mm 18,5mm<br />
Downforce range 10 - 30mN 10 - 30mN 10 - 30mN 10 - 30mN 10 - 30mN<br />
Speed variance ±0,8% ±0,8% ±0,8% ±0,8% ±0,8%<br />
Wow and flutter ±0,12% ±0,12% ±0,12% ±0,12% ±0,12%<br />
Signal to noise -65dB -65dB -65dB -65dB -65dB<br />
Platter – weight / diameter 1,3kg / 280mm 1,3kg / 280mm 1,3kg / 280mm 1,3kg / 280mm 2,2kg/300mm<br />
Power consumption 2W 2W 2W 6,5W 2W<br />
Dimensions (dust cover open) 415 x 365 x 405mm 415 x 365 x 405mm 415 x 365 x 405mm 415 x 365 x 405mm 415 x 365 x 405mm<br />
Dimensions (dust cover closed) 415 x 118 x 320mm 415 x 118 x 320mm 415 x 118 x 320mm 415 x 118 x 320mm 415 x 118 x 320mm<br />
Weight 5,5kg 5,5kg 6kg 6kg 6,9kg<br />
A<br />
B<br />
C<br />
Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.<br />
Using the Pro-Ject Speed Box II (Pro-Ject Speed Box SE), 78 r.p.m. is available after fitting a special pulley, which may be purchased as an optional extra.<br />
Switching between 33 and 45 r.p.m. is done manually. The Debut III E can not be used with the Pro-Ject Speed Box II (Pro-Ject Speed Box SE II).<br />
Electronic speed change between 33 and 45 r.p.m.. Switching to 78 r.p.m. is done manually.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
2
Technical specifications<br />
Dimensions W x H x D 1 Xpression III 1 Xpression III Comfort Perspective II<br />
Sub-chassis – – 8<br />
Fitted cartridge audio-technica AT 95E audio-technica AT 95E –<br />
Nominal speeds<br />
A<br />
33 / 45 / 78<br />
C<br />
33 / 45 / 78<br />
F<br />
33 / 45 / 78<br />
Electronic speed change – 8 –<br />
End-of-side switch-off – 8 –<br />
Dust cover 8 8 8<br />
Record clamp / record puck – – record clamp<br />
RCA phono sockets 8 8 8<br />
Feet / damping material aluminium cones / rubber aluminium cones / rubber aluminium cones<br />
Tonearm Pro-Ject 8.6c Pro-Ject 8.6c Pro-Ject 9cc<br />
Armtube / headshell made of carbon-fibre / aluminium carbon-fibre / aluminium carbon-fibre / carbon-fibre<br />
Eff. tonearm length / eff. tonearm mass 8,6“ (218,5mm) / 8,7g 8,6“ (218,5mm) / 8,7g 9“ (230mm) / 8,5g<br />
Overhang 18,5mm 18,5mm 18mm<br />
Supplied counterweights for cartridge weight 4 - 7g 4 - 7g 6 - 10g / 11 - 15g<br />
Optional counterweights for cartridge weight 7 - 12g 7 - 12g 8 - 11g<br />
Downforce range 10 - 30mN 10 - 30mN 10 - 35mN<br />
Speed variance ±0,5% ±0,5% ±0,5%<br />
Wow and flutter ±0,1% ±0,1% ±0,08%<br />
Signal to noise -70dB -70dB -70dB<br />
Platter – weight / diameter 0,9kg / 300mm 0,9kg / 300mm 2,6kg / 300mm<br />
Power consumption 2W 10W 2W<br />
Dimensions (dust cover open) 415 x 370 x 400mm 415 x 370 x 400mm 420 x 460 x 465mm<br />
Dimensions (dust cover closed) 415 x 118 x 320mm 415 x 118 x 320mm 160 x 460 x 365mm<br />
Weight 5,5kg 5,5kg 9,4<br />
A<br />
C<br />
E<br />
Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.<br />
Using the Pro-Ject Speed Box II (Pro-Ject Speed Box SE), 78 r.p.m. is available after fitting a special pulley, which may be purchased as an optional extra.<br />
Electronic speed change between 33 and 45 r.p.m.. Switching to 78 r.p.m. is done manually.<br />
Switching between 33 / 45 and 78 r.p.m. is done by exchanging the motor and belt. The 78 r.p.m. motor and belt are optional extras.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
3
Technical specifications<br />
Dimensions W x H x D 2 <strong>Xperience</strong> 2 <strong>Xperience</strong> Comfort 2 <strong>Xperience</strong> SuperPack 1 2 <strong>Xperience</strong> SuperPack 2<br />
Fitted cartridge – Ortofon 510 Mk II,<br />
Sumiko Blue Point No. 2 or<br />
Ortofon Rondo Red<br />
Ortofon Rondo Red Ortofon Salsa<br />
Nominal speeds<br />
D<br />
33 / 45<br />
E<br />
33 / 45<br />
E<br />
33 / 45<br />
E<br />
33 / 45<br />
Electronic speed change – 8 8 8<br />
End-of-side switch-off – 8 – –<br />
Dust cover 8 8 8 8<br />
Record clamp / record puck record clamp record clamp record clamp record clamp<br />
RCA phono sockets 8 8 8 8<br />
Feet / damping material aluminium cones / Sorbothane aluminium cones / Sorbothane aluminium cones / Sorbothane aluminium cones / Sorbothane<br />
Tonearm Pro-Ject 9c Pro-Ject 9c Pro-Ject 9c Pro-Ject 9c<br />
Armtube / headshell made of carbon-fibre / aluminium carbon-fibre / aluminium carbon-fibre / aluminium carbon-fibre / aluminium<br />
Eff. tonearm length / eff. tonearm mass 9“ (230mm) / 9,5g 9“ (230mm) / 9,5g 9“ (230mm) / 9,5g 9“ (230mm) / 9,5g<br />
Overhang 18mm 18mm 18mm 18mm<br />
Supplied counterweights for cartridge weight 6 - 9g 6 - 9g 9 - 11g 6 - 9g<br />
Optional counterweights for cartridge weight 4 - 6g 4 - 6g 6 - 9g 4 - 6g<br />
Downforce range 10 - 30mN 10 - 30mN 10 - 30mN 10 - 30mN<br />
Speed variance ±0,5% ±0,5% ±0,5% ±0,5%<br />
Wow and flutter ±0,08% ±0,08% ±0,08% ±0,08%<br />
Signal to noise -70dB -70dB -70dB -70dB<br />
Platter – weight / diameter 2,0kg / 300mm 2,0kg / 300mm 2,0kg / 300mm 2,0kg / 300mm<br />
Power consumption 2W 10W 2W 2W<br />
Dimensions (dust cover open) 460 x 390 x 460mm 460 x 417 x 460mm 460 x 390 x 460mm 460 x 390 x 460mm<br />
Dimensions (dust cover closed) 460 x 133 x 350mm 460 x 160 x 350mm 460 x 133 x 350mm 460 x 133 x 350mm<br />
Weight 7,6kg 7,7kg 7,6kg 7,6kg<br />
D<br />
E<br />
Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.<br />
Electronic speed change between 33 and 45 r.p.m..<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
4
Technical specifications<br />
Dimensions W x H x D RPM 1 RPM 5 RPM 5 SuperPack RPM 6.1 SB / SuperPack<br />
Fitted cartridge Ortofon OM 3E audio-technica AT 95E Pro-Ject Pick it MC1H – / Ortofon Samba<br />
Nominal speeds<br />
A<br />
33 / 45 / 78<br />
A<br />
33 / 45 / 78<br />
C<br />
33 / 45 / 78<br />
C<br />
33 / 45 / 78<br />
Electronic speed change – – 8 8<br />
Dust cover – Cover it optional Cover it optional Cover it optional<br />
Record clamp / record puck – record clamp record clamp record puck<br />
Inverted main bearing with ceramic thrust-pad 8 / – – – 8 / 8<br />
Central metal block damps main bearing – 8 8 8<br />
RCA phono sockets 8 8 8 8<br />
Feet / damping material ABS plastic aluminium cones / rubber aluminium cones / rubber aluminium cones / Sorbothane<br />
Tonearm S-shaped tonearm Pro-Ject 9c Pro-Ject 9c Pro-Ject 9c<br />
Armtube / headshell made of aluminium / aluminium carbon-fibre / aluminium carbon-fibre / aluminium carbon-fibre / aluminium<br />
Eff. tonearm length / eff. tonearm mass 8,6“ (218,5mm) / 8,5g 9“ (230mm) / 9,5g 9“ (230mm) / 9,5g 9“ (230mm) / 9,5g<br />
Overhang 19mm 18mm 18mm 18mm<br />
Supplied counterweights for cartridge weight 4 - 7g 6 - 10g 9 - 11g 6 - 10g<br />
Optional counterweights for cartridge weight – 10 - 15g / 4 - 6g 10 - 15g / 4 - 6g 10 - 15g<br />
Downforce range 15 - 30mN 10 - 30mN 10 - 30mN 10 - 30mN<br />
Speed variance ±0,8% ±0,5% ±0,5% ±0,5%<br />
Wow and flutter ±0,15% ±0,08% ±0,08% ±0,08%<br />
Signal to noise -70dB -70dB -70dB -70dB<br />
Platter – weight / diameter 1,6kg / 300mm 1,75kg / 300mm 1,75kg / 300mm 3,5kg / 330mm<br />
Power consumption 2W 2W 2W 6W<br />
Dimensions (dust cover open) * 380 x 115 x 350mm * 371 x 145 x 300mm * 371 x 145 x 300mm * 385 x 170 x 330mm<br />
Weight 3,3kg 6,5kg 6,5kg 8kg<br />
A<br />
C<br />
*<br />
Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.<br />
Using the Pro-Ject Speed Box II (Pro-Ject Speed Box SE), 78 r.p.m. is available after fitting a special pulley, which may be purchased as an optional extra.<br />
Electronic speed change between 33 and 45 r.p.m.. Switching to 78 r.p.m. is done manually.<br />
Without dust cover. Dust cover Pro-Ject Cover it optional. Dimensions Cover it: 525 x 290 x 425mm<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
5
Technical specifications<br />
Dimensions W x H x D RPM 9.1 / RPM 9.1X RPM 9.1 SuperPack 1 RPM 9.1 SuperPack 2 RPM 10<br />
Fitted cartridge – Ortofon MC W-10 Sumiko Blue Point No. 2 –<br />
Nominal speeds<br />
D<br />
33 / 45<br />
C<br />
33 / 45<br />
C<br />
33 / 45<br />
D<br />
33 / 45<br />
Electronic speed change – 8 8 –<br />
Dust cover Cover it optional Cover it optional Cover it optional Cover it optional<br />
Motor in a separate housing 8 8 8 8<br />
Record clamp / record puck record puck record puck record puck record puck<br />
Inverted main bearing with ceramic thrust-pad 8 / 8 8 / 8 8 / 8 8 / 8<br />
Magnet supported main bearing – – – 8<br />
Central metal block damps main bearing 8 8 8 8<br />
Granulate filled plinth 8 8 – 8<br />
Granulate filled equipment base Ground it deluxe 1 – – – 8<br />
RCA phono sockets 8 8 8 8<br />
Feet / damping material aluminium cones / Sorbothane aluminium cones / Sorbothane aluminium cones / Sorbothane aluminium cones / Sorbothane<br />
Tonearm Pro-Ject 9cc Pro-Ject 9cc Pro-Ject 9cc Pro-Ject 10cc<br />
Armtube / headshell made of carbon-fibre / carbon-fibre carbon-fibre / carbon-fibre carbon-fibre / carbon-fibre carbon-fibre / carbon-fibre<br />
Eff. tonearm length / eff. tonearm mass 9“ (230mm) / 8,5g 9“ (230mm) / 8,5g 9“ (230mm) / 8,5g 10“ (254mm) / 9g<br />
Overhang 18mm 18mm 18mm 16mm<br />
Supplied counterweights for cartridge weight 6 - 10g 8 - 11g 6 - 10g 6 - 9g<br />
Optional counterweights for cartridge weight 8 - 11g / 11 - 15g 6 - 10g / 11 - 15g 8 - 11g / 11 - 15g 7 - 11g / 10 - 15g<br />
Downforce range 10 - 30mN 10 - 30mN 10 - 30mN 10 - 35mN<br />
Speed variance ±0,5% ±0,5% ±0,5% ±0,5%<br />
Wow and flutter ±0,06% ±0,06% ±0,06% ±0,01%<br />
Signal to noise -73dB -73dB -73dB -73dB<br />
Platter – weight / diameter 3,5kg / 300mm 3,5kg / 300mm 3,5kg / 300mm 5,4kg / 300mm<br />
Power consumption 2W 2W 2W 2W<br />
Dimensions (dust cover open) * 440 x 180 x 325mm * 440 x 180 x 325mm * 440 x 180 x 325mm * 480 x 210 x 330mm<br />
Weight 10,5kg + 2kg Motor 10,5kg + 2kg Motor 10,5kg + 2kg Motor 14,5kg + 2kg Motor<br />
D<br />
C<br />
*<br />
Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.<br />
Electronic speed change between 33 and 45 r.p.m..<br />
Without dust cover. Dust cover Pro-Ject Cover it optional. Dimensions Cover it: 525 x 290 x 425mm<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
6
Product information<br />
Pro-Ject Pre Box<br />
Pre-amplifier with remote control<br />
Good sound from sound technology<br />
� Remote controllable<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Small size allows easy placement<br />
� Optimal channel separation through dual-mono circuitry<br />
� Special low-noise ICs used<br />
� Remote power switching for connected units via on/off switch (Trigger Pre)<br />
� Gold plated RCA connection sockets<br />
� Outboard power supply included<br />
Technical specifications<br />
Frequency response: 20Hz - 20kHz (+ - 0,2 dB)<br />
Noise floor: -100dB (A weighted)<br />
THD: 0,001%<br />
Gain: 8,5dB<br />
Pre out: 1 pair RCA/Phono sockets<br />
Output voltage typically: 1V at 1kHz<br />
Inputs: 2 pairs RCA/Phono sockets<br />
Input impedance: 20kohms<br />
Trigger (Trigger Pre): 12V DC switching voltage<br />
Trigger out: 2-pole 2,5mm co-axial jack<br />
Outboard power supply: 16V/500mA AC, suitable for your country's mains supply<br />
Power consumption: 16V/200mA AC<br />
Dimension W x H x D: 103 x 76 x 141mm<br />
Weight: 630g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
7
Product information<br />
8<br />
Pro-Ject Amp Box<br />
Stereo power amp<br />
Good sound from sound technology<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Small size allows easy placement<br />
� Bi-Phase PWM-circuit (Pulse Width Modulation)<br />
� Pro-Ject Audio digital amplifiers achieve 80% energy efficiency<br />
� The Amp Box can be switched on & off remotely via a trigger signal. A 50cm long power-on cable is<br />
supplied for this purpose<br />
� The remote power-on signal can be relayed to further units<br />
� Gold plated RCA/Phono sockets and loudspeaker terminals<br />
� Outboard power supply included<br />
Technical specifications<br />
Power output: 2 x 20W/30W at 8 Ohm/4 Ohm (both channels driven)<br />
Frequency response: 5Hz - 20kHz (+ 0dB, - 0,5dB)<br />
Channel separation: > 40dB at 20kHz<br />
Noise floor: > -100dB (A weighted)<br />
THD: < 0,05% at 10W<br />
Gain: 22dB<br />
Pre in: 1 pair RCA/Phono sockets<br />
Input sensitivity: 1V<br />
Input impedance: 47kohm<br />
Speaker connectors: 4mm ∅ banana plugs, spade connectors or naked wire<br />
Trigger: 12V DC switching voltage<br />
Trigger in and out: 2-pole co-axial ∅ 2,5mm jack<br />
Power consumption: 20V/3A DC<br />
Outboard power supply: 20V/3A DC (peak 7A DC), suitable for your country's mains supply<br />
Dimension W x H x D: 103 x 38 x 141mm<br />
Weight: 670g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject Amp Box Mono<br />
Mono power amp<br />
Good sound from sound technology<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Small size allows easy placement<br />
� Bi-Phase PWM-circuit (Pulse Width Modulation)<br />
� Pro-Ject Audio digital amplifiers achieve 80% energy efficiency<br />
� The Amp Box Mono can be switched on & off remotely via a trigger signal. A 50cm long power-on cable<br />
is supplied for this purpose<br />
� The preamplifier signal and the remote power-on signal can be relayed to further units<br />
� Gold plated RCA/Phono sockets and loudspeaker terminals<br />
� Outboard power supply included<br />
Technical specifications<br />
Power output: 2 x 28W/40W at 8 Ohm/4 Ohm<br />
Frequency response: 5Hz - 20kHz (+ 0dB, - 0,5dB)<br />
Noise floor: > -100dB (A weighted)<br />
THD: < 0,05% at 10W<br />
Gain: 22dB<br />
Pre in: 1 RCA/Phono socket<br />
Input sensitivity: 1V<br />
Input impedance: 47kohm<br />
Pre out: 1 RCA/Phono socket<br />
Speaker connector: 4mm ∅ banana plugs, spade connectors or naked wire<br />
Trigger: 12V DC switching voltage<br />
Trigger in and out: 2-pole co-axial ∅ 2,5mm jack<br />
Power consumption: 20V/3A DC<br />
Outboard power supply: 20V/3A DC (peak 7A DC), suitable for your country's mains supply<br />
Dimension W x H x D: 103 x 38 x 141mm<br />
Weight: 670g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
9
Product information<br />
10<br />
Pro-Ject Phono Box II<br />
MM/MC Phono Pre-amplifier<br />
Good sound from sound technology<br />
� Amplification and RIAA equalisation for MM and MC cartridges<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Phono MM/MC selection switch located at the rear of the unit<br />
� Small size allows installation close to record player<br />
� Optimal channel separation through dual-mono circuitry<br />
� Special low-noise ICs used<br />
� Gold plated RCA connection sockets<br />
� Outboard power supply included<br />
Technical specifications<br />
Input impedance, MM: 47kohms/120pF<br />
Input impedance, MC: 100ohms/120pF<br />
Gain, MM: 40dB<br />
Output voltage typically: 300mV/1kHz at 3mV/1kHz (MM input)<br />
Gain, MC: 60dB<br />
Output voltage typically: 300mV/1kHz at 0,3mV/1kHz (MC input)<br />
Max. output: 9,5V (1kHz)<br />
Noise floor, MM: 86dB (94dB - A weighted)<br />
Noise floor, MC: 68dB (75dB - A weighted)<br />
THD, MM:
Product information<br />
Pro-Ject Phono Box II USB<br />
MM/MC Phono Pre-amplifier with<br />
A/D converter and USB output<br />
Good sound from sound technology<br />
� Amplification and RIAA equalisation for MM and MC cartridges<br />
� Digitalisation of analog signals for recording direct to disk via USB with suitable recording programs<br />
� Runs on Windows ® , MacOS ® and Linux ® operating systems<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Phono MM/MC selection switch located at the rear of the unit<br />
� Small size allows installation close to record player<br />
� Optimal channel separation through dual-mono circuitry<br />
� Special low-noise ICs used<br />
� Gold plated RCA connection sockets<br />
� Outboard power supply included<br />
Technical specifications<br />
Input impedance, MM: 47kohms/120pF<br />
Input impedance, MC: 100ohms/120pF<br />
Gain, MM: 40dB<br />
Output voltage typically: 300mV/1kHz at 3mV/1kHz (MM input)<br />
Gain, MC: 60dB<br />
Output voltage typically: 300mV/1kHz at 0,3mV/1kHz (MC input)<br />
Max. output 9,5V (1kHz)<br />
Noise floor, MM: 86dB (94dB - A weighted)<br />
Noise floor, MC: 68dB (75dB - A weighted)<br />
THD, MM:
Product information<br />
12<br />
Pro-Ject Phono Box SE II<br />
MM/MC Phono Pre-amplifier<br />
Good sound from sound technology<br />
� Amplification and RIAA equalisation for MM and MC cartridges<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Selectable impedance for MC cartridges<br />
� Selectable load resistance for MM cartridges<br />
� Optimal channel separation through dual-mono circuitry<br />
� Subsonic filter selection switch located at the rear of the unit<br />
� Special low-noise ICs used<br />
� Gold plated RCA connection sockets<br />
� Outboard power supply included<br />
� DC operation with battery possible<br />
Technical specifications<br />
Input impedances, MM: 120, 220, 340 and 440pf/47kohm<br />
Input impedances, MC: 17, 18, 20, 22, 69, 100 and 220ohms/120pF<br />
Output voltage: 300mV/1kHz at 3mV/1kHz (MM input)<br />
Gain, MM: 40dB<br />
Output voltage: 300mV/1kHz at 0,3mV/1kHz (MC input)<br />
Gain, MC: 60dB<br />
Noise floor, MM: 95dB (100dB - A weighted)<br />
Noise floor, MC: 75dB (80dB - A weighted)<br />
THD MM: 0,03%<br />
THD MC: 0,1%<br />
RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0,3dB<br />
Subsonic filter: at 18Hz with 24dB/octave<br />
Power supply type: DC operation with battery<br />
Mains-fed outboard power supply<br />
Output voltage: 16V/1.000mA AC<br />
Power consumption: 16V/180mA AC<br />
DC power source: from ±12 to ±18V DC<br />
Dimension W x H x D: 103 x 72 x 158mm<br />
Weight: 1.050g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject Phono Box MM<br />
MM Phono Pre-amplifier<br />
Good sound from sound technology<br />
� Amplification and RIAA equalisation for MM cartridges<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Small size allows installation close to record player<br />
� Optimal channel separation through dual-mono circuitry<br />
� Special low-noise ICs used<br />
� Gold plated RCA connection sockets<br />
� Outboard power supply included<br />
Technical specifications<br />
Input impedance: 47kohms/100pF<br />
Gain: 32dB<br />
Output voltage typically: 200mV/1kHz at 5mV/1kHz<br />
Noise floor: 82dB (88dB - A weighted)<br />
THD:
Product information<br />
14<br />
Pro-Ject Tube Box II<br />
Tube MM/MC Phono Pre-amplifier<br />
Good sound from sound technology<br />
� Amplification and RIAA equalisation for MM and MC cartridges<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Phono MM/MC selection switch located at the rear of the unit<br />
� Dual-Mono circuitry utilising two double triodes for improved channel separation<br />
� Subsonic filter selection switch located at the rear of the unit<br />
� Gold plated RCA connection sockets<br />
� Outboard power supply included<br />
Technical specifications<br />
Tubes: 2 x ECC83 (12AX 7A)<br />
Input impedance, MM: 47kohms/120pF<br />
Input impedances, MC: 100ohms/120pF<br />
Gain, MM: 40dB<br />
Output voltage typically: 300mV/1kHz at 3mV/1kHz (MM input)<br />
Gain, MC: 60dB<br />
Output voltage typically: 300mV/1kHz at 0,3mV/1kHz (MC input)<br />
Noise floor, MM: 84dB (94dB - A weighted)<br />
Noise floor, MC: 67dB (75dB - A weighted)<br />
THD, MM: 0,05%<br />
THD, MC: 0,08%<br />
RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0,5dB<br />
Subsonic filter: at 18Hz with 18dB/octave<br />
Power consumption: 16V/410mA AC<br />
Power supply type: Mains-fed outboard power supply<br />
Output voltage: 16V/1.000mA AC<br />
Dimension W x H x D: 103 x 76 x 141mm<br />
Weight: 810g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject Tube Box SE II<br />
Tube MM/MC Phono Pre-amplifier<br />
Good sound from sound technology<br />
� Amplification and RIAA equalisation for MM and MC cartridges<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Selectable impedance for MC cartridges<br />
� Selectable load resistance for MM cartridges<br />
� Dual-Mono circuitry utilising two double triodes for improved channel separation<br />
� Subsonic filter selection switch located at the rear of the unit<br />
� Gold plated RCA connection sockets<br />
� Outboard power supply included<br />
Technical specifications<br />
Tubes: 2 x ECC83 (12AX 7A)<br />
Input impedances, MM: 120, 220, 340 and 440pf/47kohm<br />
Input impedances, MC: 17, 18, 20, 22, 69, 100 and 220ohms/120pF<br />
Output voltage: 300mV/1kHz at 3mV/1kHz (MM input)<br />
Gain, MM: 40dB<br />
Output voltage: 300mV/1kHz at 0,3mV/1kHz (MC input)<br />
Gain, MC: 60dB<br />
Noise floor, MM: 95dB (100dB - A weighted)<br />
Noise floor, MC: 75dB (80dB - A weighted)<br />
THD MM: 0,03%<br />
THD MC: 0,1%<br />
RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0,3dB<br />
Subsonic filter: at 18Hz with 24dB/octave<br />
Power supply type: Mains-fed outboard power supply<br />
Output voltage: 16V/1.000mA AC<br />
Power consumption: 16V/850mA AC<br />
Dimension W x H x D: 103 x 72 x 158mm<br />
Weight: 1.050g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
15
Product information<br />
16<br />
*<br />
**<br />
Pro-Ject Speed Box II<br />
Electronically regulated speed change<br />
unit for Turntables<br />
Features<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Small size allows installation close to record player<br />
� * Electronic speed change between 33 and 45 r.p.m.<br />
� ** 78 r.p.m. also possible after fitting accessory pulley<br />
� Quartz-generated high precision electronic speed regulation<br />
� All functions microprocessor controlled<br />
� Outboard power supply included<br />
Technical specifications<br />
Nominal speeds: * 33 and 45 r.p.m. ** Optional 78 r.p.m.<br />
Quartz oscillator: Speed stability +/- 0,001%<br />
Turntable connection: 16V/AC 190mA max. (3W power consumption max.)<br />
Power supply type: Mains-fed outboard power supply<br />
Output voltage: 16V/500mA AC<br />
Dimension W x H x D: 103 x 38 x 103mm<br />
Weight: 540g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish.<br />
Only models with mains socket 16V/AC power supply.<br />
The Pro-Ject Debut III E, Debut III/Phono SB, 1 Xpression II Comfort, 2 <strong>Xperience</strong> Comfort, RPM 6.1 SB and<br />
RPM 6.1 SB SuperPack may not be used with the Speed Box II.<br />
78 r.p.m. is not available with the Pro-Ject Debut III E, 2 <strong>Xperience</strong>, 2 <strong>Xperience</strong> Comfort, 2 <strong>Xperience</strong> SuperPack 1 & 2,<br />
RPM 9.1, RPM 9.1 SuperPack 1 & 2, RPM 9.1X and RPM 10.<br />
The Pro-Ject Debut III/Phono SB, 1 Xpression II Comfort, RPM 5 SuperPack, RPM 6.1 SB and RPM 6.1 SB SuperPack<br />
are equipped with an mechanic speed change for 78 r.p.m..<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
*<br />
**<br />
Pro-Ject Speed Box SE II<br />
Electronically regulated speed change unit<br />
for Turntables<br />
Features<br />
� Can acts as a power supply for both mains and 16V/AC units<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� * Electronic speed change between 33 and 45 r.p.m.<br />
� ** 78 r.p.m. also possible after fitting accessory pulley<br />
� Pitch control<br />
� Quartz-generated high precision electronic speed regulation<br />
� Digital display showing replay speed<br />
� Voltage regulation function<br />
� Mains filter with transformer decoupled output<br />
� Clean Quartz clock generated sinus wave voltage decoupled from mains interference<br />
� All functions microprocessor controlled<br />
� Outboard power supply included<br />
Technical specifications<br />
Nominal speeds: * 33 and 45 r.p.m. ** Optional 78 r.p.m.<br />
Pitch control: ±20 steps/0,1 r.p.m.<br />
Quartz oscillator: Speed stability +/- 0,001%<br />
Turntable connection: 16V/AC 190mA max. (3W power consumption max.)<br />
120V model only: 120V/AC 25mA max. (3W power consumption max.)<br />
230V model only: 230V/AC 13mA max. (3W power consumption max.)<br />
Output voltage: regulated to 230V/AC ±3% for mains voltage from 180 – 240V/AC<br />
Power supply type: Mains-fed outboard power supply<br />
Output voltage: 16V/1.000mA AC<br />
Dimension W x H x D: 103 x 72 x 145mm<br />
Weight: 1.360g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish.<br />
The Pro-Ject Debut III E, Debut III/Phono SB, 1 Xpression II Comfort, 2 <strong>Xperience</strong> Comfort, RPM 6.1 SB and<br />
RPM 6.1 SB SuperPack may not be used with the Speed Box SE II.<br />
78 r.p.m. is not available with the Pro-Ject Debut III E, 2 <strong>Xperience</strong>, 2 <strong>Xperience</strong> Comfort, 2 <strong>Xperience</strong> SuperPack 1 & 2,<br />
RPM 9.1, RPM 9.1 SuperPack 1 & 2, RPM 9.1X and RPM 10.<br />
The Pro-Ject Debut III/Phono SB, 1 Xpression II Comfort, RPM 5 SuperPack, RPM 6.1 SB and RPM 6.1 SB SuperPack<br />
are equipped with an mechanic speed change for 78 r.p.m..<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
17
Product information<br />
18<br />
Pro-Ject Head Box II<br />
Headphone amplifier<br />
Good sound from sound technology<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Gold plated RCA connection sockets<br />
� Outboard power supply included<br />
Technical specifications<br />
Power output: 330mW/30ohms, 60mW/300ohms<br />
Headphone connection: > 30ohms<br />
Signal to noise: 78dB (100dB - A weighted) at full output<br />
Frequency response: 30Hz – 20kHz/-0,05dB (10Hz – 120kHz/-1dB)<br />
THD (IMD): 0,005% (0,001%)<br />
Gain: 11dB<br />
Headphone jack: 3-pole ¼“ (6,3mm ∅) phono socket<br />
Power consumption: 16V/120mA AC<br />
Power supply type: Mains-fed outboard power supply<br />
Output voltage: 16V/500mA AC<br />
Dimension W x H x D: 103 x 38 x 127mm<br />
Weight: 600g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject Head Box SE II<br />
Headphone amplifier<br />
Good sound from sound technology<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Connections for two headphone sets with individual volume adjustment<br />
� Gold plated RCA connection sockets<br />
� Outboard power supply included<br />
Technical specifications<br />
Power output: 700mW/30ohms, 110mW/300ohms<br />
Headphone connection: > 30ohms<br />
Signal to noise: 110dB (115dB - A weighted) at full output<br />
Frequency response: 20Hz – 20kHz/-0,03dB<br />
THD (IMD): 0,003%/30ohms, 0,007/300ohms<br />
Gain: 12dB<br />
Headphone jacks: 3-pole ¼“ (6,3mm ∅) phono socket<br />
Power supply type: Mains-fed outboard power supply<br />
Output voltage: 16V/1.000mA AC<br />
Power consumption: 16V/230mA AC<br />
Dimension W x H x D: 103 x 72 x 151mm<br />
Weight: 1.080g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
19
Product information<br />
20<br />
Pro-Ject Power Box II<br />
Central power supply for the<br />
Box II family units<br />
Features<br />
� Metal case shields the electronics from vibrational and electromagnetic interference<br />
� Comfortable and compact: four appliances can be switched on/off individually.<br />
The units do not require a dedicated power supply<br />
� Outboard power supply included<br />
Technical specifications<br />
Connections: 4 x 16V/AC<br />
(Power output each outputs max. 800mA. Power output all outputs max. 1.000mA)<br />
Power supply type: Mains-fed outboard power supply<br />
Output voltage: 16V/1.000mA AC<br />
Dimension W x H x D: 103 x 38 x 103mm<br />
Weight: 545g without power supply<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Available in silver or black finish<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject 9cc<br />
9" precision tonearm with carbon-fibre armtube<br />
The tonearm's design efficiently leads parasitic vibrations away from the cartridge into the mounting board,<br />
guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical<br />
and horizontal tracing due to the following constructional details:<br />
� The headshell and armtube are fashioned from a single piece of carbon-fibre.<br />
� Conical armtube avoids standing wave reflections.<br />
� Inverted bearing design with four ABEC7 spec ballraces.<br />
� Arm bearing housing of solid ring type. Outside ring is open to prevent bell-mode resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped<br />
records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� Straight armtube reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit arm height.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw.<br />
Technical specifications<br />
Headshell: 0,5” (12,7mm) standard<br />
Mounting distance: 212mm (platter � tonearm base, Linn standard mount)<br />
Supplied counterweight: cartridge weight 6 - 10g<br />
Optional counterweights: cartridge weight 8 - 11g and 11 - 15g<br />
Effective length: 9” (230mm)<br />
Effective mass: 8,5g<br />
Overhang: 18mm<br />
Weight: 250g (without counterweight)<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
21
Product information<br />
22<br />
Pro-Ject 10cc<br />
10" precision tonearm with carbon-fibre armtube<br />
The tonearm's design efficiently leads parasitic vibrations away from the cartridge into the mounting board,<br />
guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical<br />
and horizontal tracing due to the following constructional details:<br />
� The headshell and armtube are fashioned from a single piece of carbon-fibre.<br />
� Conical armtube avoids standing wave reflections.<br />
� Inverted bearing design with four ABEC7 spec ballraces.<br />
� Arm bearing housing of solid ring type. Outside ring is open to prevent bell-mode resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped<br />
records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� Straight armtube reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit arm height.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw.<br />
Technical specifications<br />
Headshell: 0,5” (12,7mm) standard<br />
Mounting distance: 238mm (platter � tonearm base)<br />
Supplied counterweight: cartridge weight 6 - 9g<br />
Optional counterweights: cartridge weight 7 - 11g and 10 - 15g<br />
Effective length: 10” (254mm)<br />
Effective mass: 9g<br />
Overhang: 16mm<br />
Weight: 335g (without counterweight)<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject Align it<br />
Cartridge alignment tool<br />
� Tool for cartridge alignment and adjustment<br />
� Special slip-proof tool for defining the turning centre of Pro-Ject tonearms<br />
� Adaptable to accommodate differing tonearm lengths<br />
� Suitable for other manufacturers’ tonearms<br />
� Suitable for tonearms between 8” (203mm) and 12“(305mm) effective length<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
23
Product information<br />
24<br />
Pro-Ject Ground it deluxe 1 & 2<br />
Equipment bases<br />
� Dark grey piano lacquer finish (like Pro-Ject RPM 5, RPM 9.1 and RPM 10)<br />
� Filled with granulate for universal damping<br />
� Height-adjustable aluminium cone feet. Three or four feet may be fitted according to taste/application.<br />
Dimensions Ground it deluxe 1 W x H x D: 500 x 65 x 400mm (height incl. feet). Height without feet 450mm<br />
Dimensions Ground it deluxe 2 W x H x D: 435 x 65 x 340mm (height incl. feet). Height without feet 450mm<br />
Weight Ground it deluxe 1: 11,6kg<br />
Weight Ground it deluxe 2: 8,5kg<br />
Pro-Ject Cover it<br />
Universal dust cover<br />
Outside dimensions: 525 x 290 x 425mm<br />
Inside dimensions: 515 x 285 x 415mm<br />
Weight: 4,3kg<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Picture: the Pro-Ject Ground it deluxe 2 supporting a Pro-Ject RPM 9.1 (not included).<br />
The Pro-Ject RPM 10 is supplied complete with a Ground it deluxe 1.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject Wallmount it<br />
Wall mount equipment racks<br />
Wallmount it 1<br />
Welded steel frame construction with<br />
four height-adjustable spikes to level the board.<br />
Veneered wooden board, black finish<br />
Surface area (w x d): 460 x 355mm<br />
Overall dimensions (w x h x d): 460 x 90 x 415mm<br />
Wallmount it 3<br />
Screwed steel construction with<br />
three height-adjustable spikes to level the board.<br />
Matt black MDF board.<br />
Surface area (w x d): 520 x 450mm<br />
Overall dimensions (w x h x d): 635 x 290 x 455mm<br />
Wallmount it 2<br />
Welded steel frame construction with<br />
four height-adjustable spikes to level the board.<br />
Veneered wooden board, black finish<br />
Surface area (w x d): 460 x 355mm<br />
Overall dimensions (w x h x d): 490 x 260 x 455mm<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
25
Product information<br />
26<br />
Pro-Ject Debut III<br />
Manual turntable with fitted<br />
cartridge Ortofon OM 5E<br />
Turntable<br />
� Chassis available in matt black, glossy black, silver, glossy white, red, yellow, blue and green<br />
� A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on four feet which act as shock absorbers.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass<br />
bearing housing.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 8.6<br />
� The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.<br />
� Uniform material: the tonearm tube and bearing housing are constructed from aluminium.<br />
� The headshell and undamped armtube are fashioned from a single piece.<br />
� The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 3,5 - 5,5g. An alternative<br />
counterweight for cartridges weighing between 6 - 9g is available as an accessory part.<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 8,6" reduces toe-in error.<br />
� The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.<br />
� The connection cable has gold-plated plugs and appropriate capacitance and inductance values.<br />
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.<br />
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject Debut III E<br />
Manual turntable with automatic<br />
cut-off and fitted cartridge Ortofon OM 5E<br />
Turntable<br />
� Chassis available in silver or matt black<br />
� A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on four feet which act as shock absorbers.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass<br />
bearing housing.<br />
� An opto-electronic switch stops the motor as soon as the cartridge has reached the run-out groove.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 8.6<br />
� The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.<br />
� Uniform material: the tonearm tube and bearing housing are constructed from aluminium.<br />
� The headshell and undamped armtube are fashioned from a single piece.<br />
� The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 3,5 - 5,5g. An alternative<br />
counterweight for cartridges weighing between 6 - 9g is available as an accessory part.<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 8,6" reduces toe-in error.<br />
� The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.<br />
� The connection cable has gold-plated plugs and appropriate capacitance and inductance values.<br />
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.<br />
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
If a cartridge of differing height is used it may be necessary to adjust the automatic cut-off.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
27
Product information<br />
28<br />
Pro-Ject Debut III/Phono SB<br />
Manual turntable with electro mechanic speed<br />
change, fitted cartridge Ortofon OM 5E and<br />
integrated MM phono pre-amplifier<br />
Turntable<br />
� Chassis available in silver or matt black<br />
� A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on four feet which act as shock absorbers.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass<br />
bearing housing.<br />
� Electronic speed change for 33/45 r.p.m. Switching to 78 r.p.m. is done manually.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 8.6<br />
� The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.<br />
� Uniform material: the tonearm tube and bearing housing are constructed from aluminium.<br />
� The headshell and undamped armtube are fashioned from a single piece.<br />
� The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 3,5 - 5,5g. An alternative<br />
counterweight for cartridges weighing between 6 - 9g is available as an accessory part.<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 8,6" reduces toe-in error.<br />
� The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.<br />
� The connection cable has gold-plated plugs and appropriate capacitance and inductance values.<br />
� A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III/Phono to any line level/auxiliary<br />
input (Computer, Midi System, Mixer etc.).<br />
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.<br />
Phono Pre-amplifier<br />
� Optimal channel separation through dual-mono circuitry<br />
Technical specifications Phono Pre-amplifier<br />
Noise floor: 88dB<br />
THD: 0,005%<br />
Input impedance: 47kohms/100pF<br />
Power consumption: 16V/40mA AC<br />
Gain: 32dB<br />
Output voltage typically: 160mV/1kHz at 4mV/1kHz<br />
RIAA-equalisation curve accuracy: > 0,5dB/20Hz - 20kHz<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
The unit may only be connected to a line level input.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject Debut III/Phono USB<br />
Manual turntable with fitted cartridge<br />
Ortofon OM 5E and<br />
integrated MM phono pre-amplifier with<br />
A/D converter and USB output<br />
Turntable<br />
� Chassis available in silver or matt black<br />
� A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on four feet which act as shock absorbers.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass<br />
bearing housing.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 8.6<br />
� The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.<br />
� Uniform material: the tonearm tube and bearing housing are constructed from aluminium.<br />
� The headshell and undamped armtube are fashioned from a single piece.<br />
� The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 3,5 - 5,5g. An alternative<br />
counterweight for cartridges weighing between 6 - 9g is available as an accessory part.<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 8,6" reduces toe-in error.<br />
� The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
� A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III/Phono to any line level/auxiliary<br />
input (Computer, Midi System, Mixer etc.).<br />
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.<br />
Phono Pre-amplifier<br />
� Optimal channel separation through dual-mono circuitry<br />
� Digitalisation of analog signals for recording direct to disk via USB with suitable recording programs<br />
� Runs on Windows ® , MacOS ® and Linux ® operating systems<br />
Technical specifications Phono Pre-amplifier - A/D converter<br />
Noise floor: 88dB<br />
THD: 0,005%<br />
Input impedance: 47kohms/100pF<br />
Power consumption: 16V/40mA AC<br />
Gain: 32dB<br />
Output voltage typically: 160mV/1kHz at 4mV/1kHz<br />
RIAA-equalisation curve accuracy: > 0,5dB/20Hz - 20kHz<br />
USB output: digital serial data protocol USB 1.1<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The unit may only be connected to a line level input.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
29
Product information<br />
30<br />
Pro-Ject Debut SE II<br />
Manual turntable with fitted cartridge<br />
Ortofon 510 Mk II<br />
Turntable<br />
� Chassis matt black<br />
� A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The platter is a sandwich construction utilising the hub, a fine-balanced aluminium alloy platter weighing<br />
2,2Kg and a felt mat.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass<br />
bearing housing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 8.6<br />
� The turntable is supplied with Ortofon 510 Mk II MM-cartridge fitted.<br />
� Uniform material: the tonearm tube and bearing housing are constructed from aluminium.<br />
� The headshell and undamped armtube are fashioned from a single piece.<br />
� The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 3,5 - 5,5g. An alternative<br />
counterweight for cartridges weighing between 6 - 9g is available as an accessory part.<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 8,6" reduces toe-in error.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.<br />
Cartridge: Output voltage 3mV. Recommended load resistance 47kohms (MM-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject 1 Xpression III<br />
Manual turntable with fitted cartridge<br />
audio-technica AT 95E<br />
Turntable<br />
� Chassis piano-lacquered dark grey<br />
� A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub and an acrylic platter.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass<br />
bearing housing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 8.6c<br />
� The turntable is supplied with audio-technica AT 95E MM-cartridge fitted.<br />
� Conical carbon-fibre armtube avoids standing wave reflections.<br />
� Low mass aluminium headshell securely glued to armtube.<br />
� The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 4 - 7g. An alternative counterweight<br />
for cartridges weighing between 7 - 12g is available as an accessory part.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 8,6" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.<br />
Cartridge: Output voltage 4,5mV. Recommended load resistance 47kohms (MM-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
31
Product information<br />
32<br />
Pro-Ject 1 Xpression III Comfort<br />
Manual turntable with electronic<br />
speed change, automatic<br />
cut-off and fitted cartridge<br />
audio-technica AT 95E<br />
Turntable<br />
� Chassis piano-lacquered dark grey<br />
� A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub and an acrylic platter.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass<br />
bearing housing.<br />
� Electronic speed change for 33/45 r.p.m.. Switching to 78 r.p.m. is done manually.<br />
� An opto-electronic switch stops the motor as soon as the cartridge has reached the run-out groove.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 8.6c<br />
� The turntable is supplied with audio-technica AT 95E MM-cartridge fitted.<br />
� Conical carbon-fibre armtube avoids standing wave reflections.<br />
� Low mass aluminium headshell securely glued to armtube.<br />
� The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 4 - 7g. An alternative counterweight<br />
for cartridges weighing between 7 - 12g is available as an accessory part.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 8,6" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.<br />
Cartridge: Output voltage 4,5mV. Recommended load resistance 47kohms (MM-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject <strong>Xperience</strong><br />
Manual turntable<br />
Turntable<br />
� A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.<br />
� The transparent acrylic plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density<br />
fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered<br />
bronze bearing housing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9c<br />
� Conical carbon-fibre armtube avoids standing wave reflections.<br />
� Low mass aluminium headshell securely glued to armtube.<br />
� The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 6 - 9g. An alternative counterweight<br />
for cartridges weighing between 4 - 6g is available as an accessory part.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: With dust cover closed 460 x 133 x 360mm, dust cover open 460 x 390 x 460mm.<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
33
Product information<br />
34<br />
Pro-Ject <strong>Xperience</strong> Comfort<br />
Manual turntable with electronic<br />
speed change, automatic cut-off and<br />
fitted cartridge Ortofon 510 Mk II,<br />
Sumiko Blue Point No. 2 or<br />
Ortofon Rondo Red<br />
Turntable<br />
� Available finishes:<br />
Cherry Apple Olive Wenge Black gloss<br />
� A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.<br />
� The medium density fibre plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density<br />
fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered<br />
bronze bearing housing.<br />
� Electronic speed change for 33/45 r.p.m.<br />
� An opto-electronic switch stops the motor as soon as the cartridge has reached the run-out groove.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9c<br />
� The turntable is supplied with MM-cartridge Ortofon 510 Mk II, Sumiko Blue Point No. 2 high output<br />
MC-cartridge or with Ortofon Rondo Red low output MC-cartridge cartridge fitted.<br />
� Conical carbon-fibre armtube avoids standing wave reflections.<br />
� Low mass aluminium headshell securely glued to armtube.<br />
� The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 6 - 9g. An alternative counterweight<br />
for cartridges weighing between 4 - 6g is available as an accessory part.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: With dust cover closed 460 x 160 x 360mm, dust cover open 460 x 417 x 460mm.<br />
Ortofon 510 Mk II: Output voltage 3mV. Recommended load resistance 47kohms (MM-input).<br />
Sumiko Blue Point No.2: Output voltage 2,5mV. Recommended load resistance 47kohms (MM-input).<br />
Ortofon Rondo Red: Output voltage 0,5mV. Recommended load resistance 10 – 200 ohms (MC-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject 2 <strong>Xperience</strong><br />
SuperPack 1 & 2<br />
Manual turntable with fitted cartridge<br />
Ortofon Rondo Red or Ortofon Salsa and<br />
Pro-Ject Speed Box<br />
Turntable<br />
� A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.<br />
� The transparent acrylic plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density<br />
fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered<br />
bronze bearing housing.<br />
� Electronic speed change for 33/45 r.p.m.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9c<br />
� SuperPack 1: The turntable is supplied with Ortofon Rondo Red low output MC-cartridge fitted.<br />
SuperPack 2: The turntable is supplied with Ortofon Salsa low output MC-cartridge fitted.<br />
� Conical carbon-fibre armtube avoids standing wave reflections.<br />
� Low mass aluminium headshell securely glued to armtube.<br />
� The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.<br />
� Flexible counterweight shaft avoids vibration at undesirable frequencies.<br />
� The counterweight supplied is suitable for cartridges weighing between 9 - 11g (SP 1) or 6 - 9g (SP 2). An<br />
alternative weight for cartridges weighing between6 - 9g (SP 1) or 4 - 6g (SP 2) is available as an accessory part.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: With dust cover closed 460 x 133 x 360mm, dust cover open 460 x 390 x 460mm.<br />
SuperPack 1, cartridge: Output voltage 0,30mV. Recommended load resistance > 10 ohms (MC-input).<br />
SuperPack 2, cartridge: Output voltage 0,38mV. Recommended load resistance > 20 ohms (MC-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
35
Product information<br />
36<br />
Pro-Ject Perspective II<br />
Manual turntable<br />
Turntable<br />
� The transparent acrylic plinth stands on three individually height-adjustable aluminium cones and carries the<br />
motor and the sub-chassis. The aluminium sub-chassis rests on three damped steel springs which are height<br />
adjustable from above. A built-in spirit level allows easy adjustment.<br />
� The resonant frequency of the sub-chassis can be adjusted by altering the amount by which a paddle is<br />
immersed in the silicone bath. This unique construction damps out residual vibrations in the plinth which<br />
cannot be grounded via the aluminium cones.<br />
� A quiet running exchangeable AC motor with a metal pulley drives the platter's outside edge via a flat-ground<br />
belt. Two motors are supplied, each mechanically and electrically optimised for 33.3 and 45 r.p.m.<br />
respectively. A motor for 78 r.p.m. is available as an optional extra. The motors can be exchanged easily.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered<br />
bronze bearing housing.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced aluminium alloy<br />
platter weighing 2,6Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9cc<br />
� The headshell and armtube are fashioned from a single piece of carbon-fibre.<br />
� Conical armtube avoids standing wave reflections.<br />
� Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.<br />
� Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� Counterweights: Suitable for cartridge weight 6 - 10g and cartridge weight 11 - 15g supplied as standard,<br />
cartridge weight 8 - 11g available as an accessory part.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: With dust cover closed 460 x 160 x 365mm, dust cover open 460 x 420 x 465mm.<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject RPM 1<br />
Manual turntable with fitted cartridge<br />
Ortofon OM 3E<br />
Turntable<br />
� Chassis available in matt black<br />
� A quiet running synchronous motor with a two-step metal pulley drives the platter's outside edge via a<br />
rubber belt.<br />
� The drive motor is isolated on its own platform and completely decoupled from the plinth to eliminate<br />
vibration transmission.<br />
� The resonance-optimised platter is made of medium density fibre.<br />
� A inverted, chrome-plated stainless-steel axle runs on a polished metal ball in a sintered bronze bearing<br />
housing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through<br />
the gold plated phono sockets and earth screw.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9c<br />
� The turntable is supplied with Ortofon OM 3E MM-cartridge fitted.<br />
� Uniform material: the tonearm tube and bearing housing are constructed from aluminium.<br />
� The horizontal bearings consist of two hardened stainless steel points and ballraces.<br />
� The counterweight supplied is suitable for cartridges weighing between 4 - 7g.<br />
� Eccentrically mounted counterweight reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� The S-shaped armtube with an effective length of 8,6" reduces toe-in error.<br />
� The internal wiring consists of silver coated, high-purity copper.<br />
Dimensions W x H x D: 380 x 115 x 350mm<br />
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
37
Product information<br />
38<br />
Pro-Ject RPM 5<br />
Manual turntable with fitted cartridge<br />
audio-technica AT 95E<br />
Turntable<br />
� Chassis piano-lacquered dark grey<br />
� A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre<br />
platter, a cork mat (a standard felt mat is also supplied) and a screw-down record clamp.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered<br />
bronze bearing housing.<br />
� Central metal block optimises centre of gravity and damps main bearing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9c<br />
� The turntable is supplied with audio-technica AT 95E MM-cartridge fitted.<br />
� Conical carbon-fibre armtube avoids standing wave reflections.<br />
� Low mass aluminium headshell securely glued to armtube.<br />
� The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.<br />
� Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for<br />
cartridges weighing between 10 - 15g and 4 - 6g are available as an accessory part.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: 371 x 145 x 300mm. Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.<br />
Cartridge: Output voltage 4,5mV. Recommended load resistance 47kohms (MM-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject RPM 5 SuperPack<br />
Manual turntable with electronic speed change<br />
and fitted cartridge Pro-Ject Pick it MC1H<br />
Turntable<br />
� Chassis piano-lacquered dark grey<br />
� A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre<br />
platter, a cork mat (a standard felt mat is also supplied) and a screw-down record clamp.<br />
� The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered<br />
bronze bearing housing.<br />
� Central metal block optimises centre of gravity and damps main bearing.<br />
� Electronic speed change for 33/45 r.p.m.. Switching to 78 r.p.m. is done manually.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9c<br />
� The turntable is supplied with Pro-Ject Pick it MC1H high output MC-cartridge fitted.<br />
� Conical carbon-fibre armtube avoids standing wave reflections.<br />
� Low mass aluminium headshell securely glued to armtube.<br />
� The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.<br />
� Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� The counterweight supplied is suitable for cartridges weighing between 9 - 11g. Alternative counterweights for<br />
cartridges weighing between 10 - 15g and 4 - 6g are available as an accessory part.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: 371 x 145 x 300mm. Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.<br />
Cartridge: Output voltage 2,2mV. Recommended load resistance 47kohms (MM-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
39
Product information<br />
40<br />
Pro-Ject RPM 6.1 SB<br />
Manual turntable with<br />
electronic speed change<br />
Turntable<br />
� A quiet running AC motor with a two-step metal pulley drives the acrylic hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre<br />
platter, a 4mm thick flat-ground layer of vinyl and a brass record puck.<br />
� The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.<br />
� Electronic speed change for 33/45 r.p.m.. Switching to 78 r.p.m. is done manually.<br />
� Central metal block optimises centre of gravity and damps main bearing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9c<br />
� Conical carbon-fibre armtube avoids standing wave reflections.<br />
� Low mass aluminium headshell securely glued to armtube.<br />
� The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.<br />
� Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� The counterweight supplied is suitable for cartridges weighing between 6 - 10g. An alternative counterweight<br />
for cartridges weighing between 10 - 15g is available as an accessory part.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: 385 x 170 x 330mm. Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject RPM 6.1 SB SuperPack<br />
Manual turntable with electronic<br />
speed change, and fitted cartridge<br />
Ortofon Samba<br />
Turntable<br />
� A quiet running AC motor with a two-step metal pulley drives the acrylic hub and platter via a flat-ground belt.<br />
� The medium density fibre plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.<br />
� The motor is decoupled from the plinth to reduce vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre<br />
platter, a 4mm thick flat-ground layer of vinyl and a brass record puck.<br />
� The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.<br />
� Electronic speed change for 33/45 r.p.m.. Switching to 78 r.p.m. is done manually.<br />
� Central metal block optimises centre of gravity and damps main bearing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through the<br />
gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9c<br />
� The turntable is supplied with Ortofon Samba low output MC-cartridge fitted.<br />
� Conical carbon-fibre armtube avoids standing wave reflections.<br />
� Low mass aluminium headshell securely glued to armtube.<br />
� The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.<br />
� Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� The counterweight supplied is suitable for cartridges weighing between 6 - 10g. An alternative counterweight<br />
for cartridges weighing between 10 - 15g is available as an accessory part.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: 385 x 170 x 330mm. Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.<br />
Cartridge: Output voltage 0,30mV. Recommended load resistance > 10 ohms (MC-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
41
Product information<br />
42<br />
Pro-Ject RPM 9.1<br />
Manual turntable<br />
Turntable<br />
� Chassis and motor housing piano-lacquered dark grey<br />
� A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.<br />
� The medium density fibre plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.<br />
A supplied spirit level allows easy adjustment. Granulate filled plinth guarantees constant damping.<br />
� The motor is mounted in a separate metal housing to eliminate vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg<br />
and a brass record puck.<br />
� The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.<br />
� Central metal block optimises centre of gravity and damps main bearing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through<br />
the gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9cc<br />
� The headshell and armtube are fashioned from a single piece of carbon-fibre.<br />
� Conical armtube avoids standing wave reflections.<br />
� Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.<br />
� Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for<br />
cartridges weighing between 8 - 11g and 11 - 15g are available as an accessory part.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: Including motor unit 440 x 180 x 325mm.<br />
Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject RPM 9.1 SuperPack 1 & 2<br />
Manual turntable with fitted cartridge<br />
Ortofon Rondo Red or Sumiko Blue Point No. 2<br />
and Pro-Ject Speed Box SE<br />
Turntable<br />
� Chassis and motor housing piano-lacquered dark grey<br />
� A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.<br />
� The medium density fibre plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.<br />
A supplied spirit level allows easy adjustment. Granulate filled plinth guarantees constant damping.<br />
� The motor is mounted in a separate metal housing to eliminate vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg<br />
and a brass record puck.<br />
� The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.<br />
� Central metal block optimises centre of gravity and damps main bearing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through<br />
the gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9cc<br />
� SuperPack 1: The turntable is supplied with Ortofon Rondo Red low output MC-cartridge fitted.<br />
SuperPack 2: The turntable is supplied with Sumiko Blue Point No. 2 high output MC-cartridge fitted.<br />
� The headshell and armtube are fashioned from a single piece of carbon-fibre.<br />
� Conical armtube avoids standing wave reflections.<br />
� Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.<br />
� Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� The counterweight supplied is suitable for cartridges weighing between 8 - 11g (SP 1) or 6 - 10g (SP 2).<br />
Alternative weights for cartridges weighing between 6 - 10g (SP 1) or 8 - 11g (SP 2) and 11 - 15g (SP 1/2)<br />
are available as an accessory part.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: Including motor unit 440 x 180 x 325mm.<br />
Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.<br />
SuperPack 1, cartridge: Output voltage 0,30mV. Recommended load resistance > 10 ohms (MC-input).<br />
SuperPack 2, cartridge: Output voltage 2,5mV. Recommended load resistance 47kohms (MM-input).<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
43
Product information<br />
44<br />
Pro-Ject RPM 9.1X<br />
Manual turntable<br />
Turntable<br />
� A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.<br />
� The transparent acrylic plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.<br />
A supplied spirit level allows easy adjustment.<br />
� The motor is mounted in a separate metal housing to eliminate vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg<br />
and a brass record puck.<br />
� The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.<br />
� Central metal block optimises centre of gravity and damps main bearing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through<br />
the gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 9cc<br />
� The headshell and armtube are fashioned from a single piece of carbon-fibre.<br />
� Conical armtube avoids standing wave reflections.<br />
� Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.<br />
� Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for<br />
cartridges weighing between 8 - 11g and 11 - 15g are available as an accessory part.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 9" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions W x H x D: Including motor unit 440 x 180 x 325mm.<br />
Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07
Product information<br />
Pro-Ject RPM 10<br />
Manual turntable with<br />
10" tonearm and<br />
equipment base<br />
Pro-Ject Ground it deluxe 1<br />
Turntable<br />
� Chassis, motor housing and granulate filled equipment base Ground it deluxe piano-lacquered dark grey<br />
� A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.<br />
� The medium density fibre plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.<br />
Granulate filled plinth guarantees constant damping. A supplied spirit level allows easy adjustment.<br />
� The motor is mounted in a separate metal housing to eliminate vibration transmission.<br />
� The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 5,4Kg<br />
and a brass record puck.<br />
� The magnet supported, inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic<br />
bearing plate runs.<br />
� Central metal block optimises centre of gravity and damps main bearing.<br />
� Connection to the phono input of the amplifier can be made with connecting cables of your taste through<br />
the gold plated phono sockets and earth screw. A standard cable is provided.<br />
� External power supply avoids potential electro-mechanical interference.<br />
Tonearm Pro-Ject 10cc<br />
� The headshell and armtube are fashioned from a single piece of carbon-fibre.<br />
� Conical armtube avoids standing wave reflections.<br />
� Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.<br />
� Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.<br />
� Design of counterweight effectively counteracts unwanted resonances.<br />
� The counterweight supplied is suitable for cartridges weighing between 6 - 9g. Alternative counterweights for<br />
cartridges weighing between 7 - 11g and 10 - 15g are available as an accessory part.<br />
� Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing<br />
warped records.<br />
� Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).<br />
� Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.<br />
� The straight armtube with an effective length of 10" reduces toe-in error.<br />
� Silicone-damped armlift can be adjusted to suit working height of the arm.<br />
� The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated<br />
phono sockets.<br />
Dimensions turntable, W x H x D: Including motor unit 480 x 210 x 330mm.<br />
Dimensions equipment base Ground it deluxe: 500 x 65 x 400mm (H including feet). H without cone feet 45mm<br />
Dust cover Cover it optional, W x H x D: 525 x 290 x 425mm.<br />
The manufacturer reserves the right to alter the technical specifications without notice.<br />
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger<br />
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697<br />
www.project-audio.com · © Heinz Lichtenegger · Revision 27.7.07<br />
45