Clevermount - Hense Wägetechnik GmbH
Clevermount - Hense Wägetechnik GmbH
Clevermount - Hense Wägetechnik GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Clevermount</strong><br />
Hygienic Weighing Assembly<br />
The CLEVERMOUNT is designed for tough<br />
industrial weighing applications. It is<br />
ideally suited for weighing hoppers and<br />
tanks where hygiene is the priority. The<br />
assembly ensures precise, reliable and<br />
safe operation and when combined with<br />
the fully welded and sealed Ultra Shear<br />
Beam load cell, provides the preferred<br />
solution for weighing in harsh environments.<br />
The novel design can be installed<br />
with ease and facilitates cell removal<br />
without the need to jack the vessel. The<br />
assembly accommodates angular and<br />
vertical misalignment and provides antilift<br />
protection.<br />
Features:<br />
>> simplified installation<br />
>> no jacking required<br />
>> capacities from 250 kg<br />
to 2.000 kg<br />
>> all stainless steel<br />
construction<br />
>> self correcting and levelling<br />
load plate<br />
>> available with welded stainless<br />
steel IP 68 load cell<br />
>> five year guarantee<br />
>> CE Approval<br />
www.hense-waegetechnik.de
Engineering specifications CLEVERMOUNT<br />
The CLEVERMOUNT is designed for weighing vessels, hoppers and silos in extremely harsh environments.<br />
Manufactured from cast stainless steel it is ideal for chemical, food, pharmaceutical or other<br />
applications where conditions can be severe. The assembly ensures that the vessels are securely<br />
mounted in position via two stainless steel plates.<br />
Load is transferred to the load cell through a hardened spherical bearing that will permit misalignment<br />
whilst minimising side forces. The vessel is supported during installation with or without the load cell<br />
located. Normally the anti-lift feature of the design eliminates the need for tie bars or stay rods.<br />
Capacity 20 kg, 50 kg, 100 kg, 250 kg, 500 kg, 1.000 kg, 2.000 kg, 2.500 kg<br />
Supply voltage 5-12 VDC, max. 15 V<br />
Full Scale Output 2 mV/V<br />
Nonlinearity 0.03 % max.<br />
Hysteresis 0.02 %<br />
Non-Repeatability 0.02 %<br />
Safe Overload 150 %<br />
Output Resistance 350 Ohm<br />
Operating Temp. -10° C to 65° C<br />
Insulation Resistance > 2000 MOhm<br />
Load cell colour code<br />
rot + excitation<br />
blau - excitation<br />
grün + signal<br />
gelb - signal<br />
all units in mm<br />
<strong>Hense</strong> <strong>Wägetechnik</strong> <strong>GmbH</strong> · Nordring 38 · 59929 Brilon · Germany · Tel. +49 2961 965686 · Fax +49 2961 965689 · info@hense-waegetechnik.de · www.hense-waegetechnik.de