MIC - Flowmeter - Hense Wägetechnik GmbH

MIC - Flowmeter
Reliable Flowmeter for pneumatic and
gravimetric conveyed Solids
The transducer is mounted in line with
the pipe wall. (Mounting plug is included).
The sensor face transmits a frequency of
24 GHz to the powder or grain material.
The pulses reflected from the single
particles are analysed via a special
algorythm and then converted into a flow
proportional signal.
The electronic displays the flow value
direct in kg/h and in absolut quantity
(kg) (t).
The system is nearly independent from
pressure and temperature and provides
a final accuracy arround +/- 5 %.
With an even deviation of the particles
stream the repeatability of the measurement
is better that +/- 2 % of the maximum
flow range.
Features:
>> easy retrofitted to existing
pipes
>> no direct contact to the
product
>> maintenance and wear free
>> detects only moving part
www.hense-waegetechnik.de

Engineering specifications MIC - FLOWMETERS
Engineering specifications of the transducer
Supply voltage 24 VDC
Current 0,5 A
Measuring frequency K - belt
(24, 125 GHz)
Output 4 - 20 mA
Repeatability +/- 2%
Temp.-range -10° C to 65° C
Material
Sensor stainless steel / plastic
Junction box Aluminium
Type of protection IP 54
Mounting plug 1/2“ NPT
Electronic specifications
Display LCD - 2 lines
kg /h; kg (abs.)
Supply voltage 230 V / 115 V AC
or 24 VDC
Input current signal
Output counter pulse / kg
Optional 4 - 20 mA
RS 232 / 422
Housing Plastic
Type of protection acc. to IP 55
Mounting wall mounting
Temp.-range 0° C to 50° C
Flowmeasurement of
pneumatic conveyed
limestone powder
(DN 80/2.000 kg/h)
Electronics with unscrewable sensor
Hense Wägetechnik GmbH · Nordring 38 · 59929 Brilon · Germany · Tel. +49 2961 965686 · Fax +49 2961 965689 · info@hense-waegetechnik.de · www.hense-waegetechnik.de