Product Contact Surfaces - 3-A Sanitary Standards

More documents

Recommendations

Info

D14 Inspectibility D14.1 A pump shall be designed that (See Appendix, Section E10): D14.1.1 The open area between the exterior of the driver or gear case housing to the exterior of the product chamber shall be 1/2 in. (12 mm) minimum width and of sufficient area to allow unrestricted viewing of the pump shaft(s) or seal components at the potential leak site. This area shall be self-draining. D14.1.2 At least 1/4 in. (6mm) of the shaft(s) exclusive of the seal components shall be visible. D14.1.3 Guards required by a safety standard that will not permit accessibility for cleaning and inspection shall be designed so that they can be removed with the use of simple hand tools.
1. DRIVER OR GEARCASE HOUSING 2. DRIVE SHAFT 3. SLINGER (OPTIONAL) 4. SANITARY SEAL 5. PUMP BODY 6. ½” MINIMUM 7. ¼” MINIMUM
Page 1 and 2:
3-A SSI For Beginners and the Basic
Page 3 and 4:
Welcome!
Page 5 and 6:
Student Travel Award Recipients Bre
Page 7 and 8:
The Schedule Overview of 3-A SSI Ba
Page 9 and 10:
3-A SSI For Beginners History and S
Page 11 and 12:
Brief History of 3-A SSI 1920 First
Page 13 and 14:
The 3-A SSI Stakeholders Regulatory
Page 15 and 16:
The 3-A SSI Board of Directors 5 Or
Page 17 and 18:
3-A SSI Board of Directors Larry Ha
Page 19 and 20:
Mission Objectives To advance the r
Page 21 and 22:
What is the 3-A Symbol? The 3-A Sym
Page 23 and 24:
Why a New TPV Requirement? TPV brin
Page 25 and 26:
How a TPV is Done The Symbol Holder
Page 27 and 28:
Qualifications of a CCE Must meet s
Page 29 and 30:
TPV Inspection Services Required fo
Page 31 and 32:
The Role of 3-A SSI in Commerce USP
Page 33 and 34:
The Consensus Process 3-A SSI is an
Page 35 and 36: Basics of Sanitary Design Part 1
Page 37 and 38: 3-A Sanitary Standards Vessels Fill
Page 39 and 40: 3-A Accepted Practices Process and
Page 42 and 43: Seven Common Elements of 3-A Sanita
Page 44 and 45: Normative References B1 The followi
Page 46 and 47: Product Contact Surfaces: All surfa
Page 48 and 49: Materials To identify what material
Page 50 and 51: Fabrication Equipment is to be desi
Page 52 and 53: Appendix Sections Stainless Steels
Page 54 and 55: Break
Page 56: Centrifugal Pump Evaluation
Page 60 and 61: While Disassembled - CCE Checklist
Page 62: D2 Permanent Joints D2.1 All perman
Page 65 and 66: D4 Cleaning D4.1 Centrifugal and po
Page 67 and 68: D6 Fittings D6.1 All sanitary fitti
Page 70: D8 Gaskets D8.1 Gaskets having a pr
Page 76 and 77: There are no minimum radii requirem
Page 78 and 79: D10 Springs Coil springs having pro
Page 80 and 81: ACME Thread
Page 83 and 84: D11.2.2 Enclosed Threads D11.2.2.1
Page 85: D13 Sterilization Systems D13.1 Pum
Page 89 and 90: D16 Supports D16.1 Baseplate Mounte
Page 91 and 92: More Details on 3-A SSI Contact us
Page 93 and 94: Expanded Knowledge Center New Video
Page 95: Questions?
show all

Product Contact Surfaces - 3-A Sanitary Standards

Create successful ePaper yourself

Delete template?

Save as template?