Product Contact Surfaces - 3-A Sanitary Standards

More documents

Recommendations

Info

D16.2 Legs D16.2.1 Legs, when used, shall be adjustable or fixed with rounded ends or have flat load bearing feet suitable for mounting to the floor and have no exposed threads. D16.2.2 Legs made of hollow stock shall be sealed. D16.2.3 Legs shall be of sufficient length to provide a minimum clearance between the lowest part of the base, pump, motor or drive and floor no less than 4 in. (100 mm) on pumps with legs designed to be fixed to the floor or pumps having a horizontal base area of more than 1 ft2 (0.095 m2). D16.2.4 Legs shall be of sufficient length to provide a minimum clearance of 2 in. (50 mm) on pumps having a horizontal base area of 1 ft2 (0.095 m2) or less and not designed to be fixed to the floor. Copyright© 3-A Sanitary Standards, Inc., McLean, VA 02-10 7 D16.2.5 If casters or wheels are used they shall be of sufficient size to provide a clearance between the lowest part of the base and the floor of not less than 4 in. (101.6 mm). Casters or wheels, if provided, shall be easily cleanable, durable, and of a size that will permit easy movement of the centrifugal or positive rotary pump.
More Details on 3-A SSI Contact us at: 6888 Elm Street, Suite 2D McLean, Virginia, 22101 PH: 703-790-0295 FAX: 703-761-6284 Contact Tim Rugh, Nate Wall or Philomena Short trugh@3-a.org, nwall@3-a.org, pshort@3-a.org
Page 1 and 2:
3-A SSI For Beginners and the Basic
Page 3 and 4:
Welcome!
Page 5 and 6:
Student Travel Award Recipients Bre
Page 7 and 8:
The Schedule Overview of 3-A SSI Ba
Page 9 and 10:
3-A SSI For Beginners History and S
Page 11 and 12:
Brief History of 3-A SSI 1920 First
Page 13 and 14:
The 3-A SSI Stakeholders Regulatory
Page 15 and 16:
The 3-A SSI Board of Directors 5 Or
Page 17 and 18:
3-A SSI Board of Directors Larry Ha
Page 19 and 20:
Mission Objectives To advance the r
Page 21 and 22:
What is the 3-A Symbol? The 3-A Sym
Page 23 and 24:
Why a New TPV Requirement? TPV brin
Page 25 and 26:
How a TPV is Done The Symbol Holder
Page 27 and 28:
Qualifications of a CCE Must meet s
Page 29 and 30:
TPV Inspection Services Required fo
Page 31 and 32:
The Role of 3-A SSI in Commerce USP
Page 33 and 34:
The Consensus Process 3-A SSI is an
Page 35 and 36:
Basics of Sanitary Design Part 1
Page 37 and 38:
3-A Sanitary Standards Vessels Fill
Page 39 and 40: 3-A Accepted Practices Process and
Page 42 and 43: Seven Common Elements of 3-A Sanita
Page 44 and 45: Normative References B1 The followi
Page 46 and 47: Product Contact Surfaces: All surfa
Page 48 and 49: Materials To identify what material
Page 50 and 51: Fabrication Equipment is to be desi
Page 52 and 53: Appendix Sections Stainless Steels
Page 54 and 55: Break
Page 56: Centrifugal Pump Evaluation
Page 60 and 61: While Disassembled - CCE Checklist
Page 62: D2 Permanent Joints D2.1 All perman
Page 65 and 66: D4 Cleaning D4.1 Centrifugal and po
Page 67 and 68: D6 Fittings D6.1 All sanitary fitti
Page 70: D8 Gaskets D8.1 Gaskets having a pr
Page 76 and 77: There are no minimum radii requirem
Page 78 and 79: D10 Springs Coil springs having pro
Page 80 and 81: ACME Thread
Page 83 and 84: D11.2.2 Enclosed Threads D11.2.2.1
Page 85 and 86: D13 Sterilization Systems D13.1 Pum
Page 87 and 88: 1. DRIVER OR GEARCASE HOUSING 2. DR
Page 89: D16 Supports D16.1 Baseplate Mounte
Page 93 and 94: Expanded Knowledge Center New Video
Page 95: Questions?
show all

Product Contact Surfaces - 3-A Sanitary Standards

Create successful ePaper yourself

Delete template?

Save as template?